N NHD‐‐5.0‐‐8004 480TTF‐222 Co ontro ollerr Board d TFTT Contrroller Evvaluatio on Boarrd NHD‐‐ 5‐ 8004 480‐ TF‐ 22‐ Newhaven Display 5.0” Diagonal 80 00xRGBx480 pixels Model M 22 2‐POS FFC intterface (8‐bit data) SSSD1963 Controller Newh haven Disp play Intern national, In nc. 2511 Techno ology Drive, SSuite 101 Elggin IL, 60124 Ph: 8 847‐844‐8795 5 Fax: 8847‐844‐87966 www.new whavendisplayy.com nhtech h@newhaven ndisplay.com [email protected] om Document Revision History Revision 0 Date 2/25/2014 Description Initial Release Changed by AK Functions and Features To use for testing, evaluating, or in final production with NHD‐5.0‐800480TF‐A displays. L A I Mechanical Drawing 1 2 3 4 A Rev D 1 Date T N F N O C 6 Description E D I B C 5 B C D Date 02/25/14 2 A 3 4 Gen. Tolerance Unit ±0.3mm mm 5 Model: NHD-5.0-800480TF-22 6 The drawing contained herein is the exclusive property of Newhaven Display International, Inc. and shall not be copied, reproduced, and/or disclosed in any format without permission. [3] Pin Description J1 (SSD1963 output to display panel): Pin No. Symbol 1 2 3 4 5‐12 13‐20 21‐28 29 30 31 32 33 34 35 36 37 38 39 40 LED‐ LED+ GND VDD [R0‐R7] [G0‐G7] [B0‐B7] GND CLKIN STBYB HSD VSD DEN NC GND XR YD XL YU External Connection LED Power Supply LED Power Supply Power Supply Power Supply MPU MPU MPU Power Supply MPU MPU MPU MPU MPU ‐ Power Supply Touch Controller Touch Controller Touch Controller Touch Controller Function Description Backlight Cathode (Ground) Backlight Anode (Power) Ground Power supply for LCD and logic Red Data Signals Green Data Signals Blue Data Signals Ground Clock for input data (Rising Edge) 1: Normal Operation; 0: Standby Mode Line synchronization signal Frame synchronization signal Data Enable signal No Connect Ground Touch Panel Right Touch Panel Down Touch Panel Left Touch Panel Up J2 (SSD1963 input from user’s MPU) Pin No. Symbol 1 2 3 4 5 6 7‐14 15 16 17 18 19 20 21 22 GND VDD B/L Enable D/C /WR /RD DB0‐DB7 /CS /RESET NC XR DISP YD XL YU External Connection Power Supply Power Supply Power Supply MPU MPU MPU MPU MPU MPU ‐ Touch Panel MPU MPU Touch Panel MPU Touch Panel MPU Touch Panel MPU Function Description Ground Power supply for LCD and logic (3.3V) Backlight Enable Data/Command select. D/C=0: Command, D/C=1: Data Active LOW Write signal (8080 mode) Active LOW Read signal (8080 mode) 8‐bit bidirectional data bus Active LOW Chip Select signal Active LOW Reset signal No Connect Touch Panel Right Display On signal Touch Panel Down Touch Panel Left Touch Panel Up Elecctrical Ch haracterisstics Item m Operaating Temperaature Range Storage Temperature Range Supply Voltage Supply Current “H” leevel input “L” leevel input “H” leevel output “L” leevel output Symbo ol Top Tst VDD IDD VIH VIL VOH VOL Condittion Absolute e Max Absolute e Max M in. ‐220 ‐330 3..0 ‐ 0.8**VDD 0 0.8**VDD 0 Typ. ‐ ‐ 3.3 2855 ‐ ‐ ‐ ‐ Max. +70 +80 3.6 ‐ VDD 0.2*VDD D VDD 0.2*VDD D Con ntroller In nformatio on Built‐‐in SSD1963 ccontroller. Pleasse download specification at http://ww ww.newhaven ndisplay.com//app_notes/SSSD1963.pdf Tab ble of Com mmands Pleasse download specification at http://ww ww.newhaven ndisplay.com//app_notes/SSSD1963.pdf Tim ming Charracteristiccs Unit ⁰C ⁰C V mA V V V V Writte Cycle: d Cycle: Read Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Endurance test applying electric static discharge. Test Condition 2 ‐30⁰C , 200hrs 1,2 +70⁰C 200hrs 2 ‐20⁰C , 200hrs 1,2 +60⁰C , 90% RH , 96hrs 1,2 ‐20⁰C,30min ‐> 25⁰C,5min ‐> 70⁰C,30min = 1 cycle 10 cycles 10‐55Hz , 15mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=800V, RS=1.5kΩ, CS=100pF One time Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions http://www.newhavendisplay.com/index.php?main_page=terms Note +80⁰C , 200hrs 3