ECV Datasheet

ECV
www.vishay.com
Vishay Roederstein
Aluminum Capacitors
FEATURES
• Load life: 2000 h at 105 °C
• Miniature dimension
• SMD style
• Reflow soldering
• Polarized aluminum electrolytic capacitors
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
DESCRIPTION
APPLICATIONS
VALUE
Nominal case size
(Ø D x L in mm)
• Industrial
electronics,
automotive
telecommunication systems
4 x 5.3 to 12.5 x 13.5
Rated capacitance range, CR
Capacitance tolerance
10 μF to 2200 μF
• Smoothing and filtering
± 20 %
Rated voltage range
• Miniature power supply units, dc-to-dc converters
6.3 V to 50 V
Category temperature range
Load life
- 40 °C to 105 °C
PACKAGING
2000 h
Based on sectional specification
Climatic category
IEC 60068
electronics,
Supplied in blister tape.
IEC 60384-4/EN130300
40/105/56
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
RATED VOLTAGE (V)
CR
(μF)
6.3
10
16
25
35
50
10


4 x 5.3

5 x 5.3
6.3 x 5.8
22



6.3 x 5.8
6.3 x 5.8
8 x 6.2
33


6.3 x 5.8
6.3 x 5.8
8 x 6.2
8 x 10
47
5 x 5.3

6.3 x 5.8
8 x 6.2
8 x 10
10 x 10
100

6.3 x 5.8

8 x 10

10 x 10
220

8 x 10
10 x 10

10 x 10
12.5 x 13.5
330
8 x 10

10 x 10
10 x 10
12.5 x 13.5
-
470

10 x 10
10 x 10
10 x 10
12.5 x 13.5
-
680



12.5 x 13.5
-
-
1000

10 x 10
12.5 x 13.5
-
-
-
1500
10 x 10
12.5 x 13.5
-
-
-
-
2200
12.5 x 13.5
-
-
-
-
-
Revision: 18-Oct-12
Document Number: 25003
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ECV
www.vishay.com
Vishay Roederstein
DIMENSIONS in millimeters
CASE SIZE
CODE
D±
L±
A±
B±
C±
E±
R
N
P
BB
BC
AD
BM
AE
AF
AG
AH
4 ± 0.5
5 ± 0.5
6.3 ± 0.5
6.3 ± 0.5
8 ± 0.5
8 ± 0.5
10 ± 0.5
12.5 ± 0.5
5.3 ± 0.2
5.3 ± 0.2
5.8 ± 0.3
7.7 ± 0.4
6.2 ± 0.4
10 ± 0.5
10 ± 0.5
13.5 ± 0.5
1.9 ± 0.2
2.3 ± 0.2
2.4 ± 0.2
2.4 ± 0.2
3.3 ± 0.2
2.9 ± 0.2
3.2 ± 0.2
4.6 ± 0.2
4.3 ± 0.2
5.3 ± 0.2
6.6 ± 0.2
6.6 ± 0.2
8.3 ± 0.2
8.3 ± 0.2
10.3 ± 0.2
12.8 ± 0.2
4.3 ± 0.2
5.3 ± 0.2
6.6 ± 0.2
6.6 ± 0.2
8.3 ± 0.2
8.3 ± 0.2
10.3 ± 0.2
12.8 ± 0.2
1.0 ± 0.2
1.4 ± 0.2
2.2 ± 0.2
2.2 ± 0.2
2.3 ± 0.2
3.1 ± 0.2
4.5 ± 0.2
4.5 ± 0.2
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.8 to 1.1
0.8 to 1.1
1.1 to 1.4
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
Capacitance
N max.
Plastic plateform
C±α
+ Positive
P max.
A±α
E±α
A±α
Voltage
B±α
Lot no.
ØD±α
22 A
50
+
L±α
RESR
IR
- Negative
ORDERING EXAMPLE
ELECTRICAL DATA
SYMBOL
UR
CR
tan 
R
ECV 220 μF/35 V, ± 20 %, size 10 mm x 10 mm
DESCRIPTION
Ordering code: MALSECV00AG322FARK
Rated voltage
Rated capacitance at 120 Hz
Max. dissipation factor at 120 Hz
Max. equivalent series resistance at 120 Hz
Rated alternating current at 120 Hz and upper
category temperature
For Standard Packaging Quantity (SPQ) and Minimum Order
Quantity (MOQ) please refer to our price list or contact
customer service.
Note
• Unless otherwise specified, all electrical values apply at
Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
6.3
10
16
CR
120 Hz
(μF)
DIMENSIONS
DxL
(mm)
tan 
120 Hz
RESR
120 Hz/20 °C
()
IR
120 Hz/105 °C
(mA)
WEIGHT
(g)
CATALOG NUMBER
47
330
1500
2200
100
220
470
1000
1500
10
33
47
220
330
470
1000
5 x 5.3
8 x 10
10 x 10
12.5 x 13.5
6.3 x 5.8
8 x 10
10 x 10
10 x 10
12.5 x 13.5
4 x 5.3
6.3 x 5.8
6.3 x 5.8
10 x 10
10 x 10
10 x 10
12.5 x 13.5
0.22
0.28
0.28
0.28
0.19
0.24
0.24
0.24
0.24
0.16
0.16
0.16
0.20
0.20
0.20
0.20
6.21
1.13
0.25
0.17
2.52
1.45
0.68
0.32
0.21
21.22
6.43
4.52
1.21
0.80
0.56
0.27
36
288
560
730
60
173
351
550
650
17
40
50
330
441
489
600
0.17
1.00
1.21
2.00
0.30
1.00
1.21
1.21
2.00
0.12
0.30
0.30
1.21
1.21
1.21
2.00
MALSECV00BC247BARK
MALSECV00AF333BARK
MALSECV00AG415BARK
MALSECV00AH422BARK
MALSECV00AD310CARK
MALSECV00AF322CARK
MALSECV00AG347CARK
MALSECV00AG410CARK
MALSECV00AH415CARK
MALSECV00BB210DARK
MALSECV00AD233DARK
MALSECV00AD247DARK
MALSECV00AG322DARK
MALSECV00AG333DARK
MALSECV00AG347DARK
MALSECV00AH410DARK
Revision: 18-Oct-12
Document Number: 25003
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ECV
www.vishay.com
Vishay Roederstein
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
25
35
50
DIMENSIONS
DxL
(mm)
6.3 x 5.8
6.3 x 5.8
8 x 6.2
8 x 10
10 x 10
10 x 10
12.5 x 13.5
5 x 5.3
6.3 x 5.8
8 x 6.2
8 x 10
10 x 10
12.5 x 13.5
12.5 x 13.5
6.3 x 5.8
8 x 6.2
8 x 10
10 x 10
10 x 10
12.5 x 13.5
CR
120 Hz
(μF)
22
33
47
100
330
470
680
10
22
33
47
220
330
470
10
22
33
47
100
220
tan 
120 Hz
0.14
0.14
0.16
0.16
0.16
0.16
0.16
0.12
0.12
0.13
0.13
0.13
0.13
0.13
0.10
0.12
0.12
0.12
0.12
0.12
RESR
120 Hz/20 °C
()
8.44
5.63
4.52
2.12
0.64
0.45
0.31
15.92
7.23
5.22
3.67
0.78
0.52
0.37
13.26
7.23
4.82
3.39
1.59
0.72
IR
120 Hz/105 °C
(mA)
38
48
79
181
372
450
500
24
42
76
124
450
500
600
30
67
133
180
310
480
WEIGHT
(g)
CATALOG NUMBER
0.30
0.30
0.55
1.00
1.21
1.21
2.00
0.17
0.30
0.55
1.00
1.21
2.00
2.00
0.30
0.55
1.00
1.21
1.21
2.00
MALSECV00AD222EARK
MALSECV00AD233EARK
MALSECV00AE247EARK
MALSECV00AF310EARK
MALSECV00AG333EARK
MALSECV00AG347EARK
MALSECV00AH368EARK
MALSECV00BC210FARK
MALSECV00AD222FARK
MALSECV00AE233FARK
MALSECV00AF247FARK
MALSECV00AG322FARK
MALSECV00AH333FARK
MALSECV00AH347FARK
MALSECV00AD210HARK
MALSECV00AE222HARK
MALSECV00AF233HARK
MALSECV00AG247HARK
MALSECV00AG310HARK
MALSECV00AH322HARK
REFLOW SOLDERING CONDITIONS FOR SMD ALUMINUM ELECTROLYTIC CAPACITORS
tP
TP
Critical Zone
TL to TP
Temperature
Ramp-up
TL
tL
Ts max.
Ts min.
Ramp-down
ts
Preheat
t 25 °C to Peak
Time
PROFILE FEATURE
Average ramp-up rate (TL to TP)
Preheat
Temperature min. (Ts min.)
Temperature max. (Ts max.)
Time (Ts min. to Ts max.)
Ts max. to TL
Ramp-up rate
Time maintained above temperature (TL)
Time (tL)
Peak/classification temperature (TP)
Time within 5 °C of actual peak temperature (TP)
Ramp-down rate
Time 25 °C to peak temperature
Revision: 18-Oct-12
Ø 4 TO Ø 10
3 °C/s max.
150 °C
200 °C
60 s to 150 s
3 °C/s max.
217 °C
60 s to 90 s
250 °C
10 s max.
3 °C/s max.
8 min max.
SOLDERING CONDITION
Ø 12.5
3 °C/s max.
Ø 16
150 °C
200 °C
40 s to 120 s
40 s to 100 s
3 °C/s max.
217 °C
40 s to 60 s
240 °C
230 °C
10 s max.
3 °C/s max.
8 min max.
Document Number: 25003
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ECV
www.vishay.com
Vishay Roederstein
RESISTANCE TO SOLDERING HEAT
Leakage current
Less than specified value
Capacitance value
Within ± 10 % of initial value
tan 
Less than specified value
LOW TEMPERATURE BEHAVIOR (at 120 Hz)
IMPEDANCE RATIO
(Z) T2/(Z) T1
RATED VOLTAGE (V)
T2/T1
6.3
10
16
25
35
50
- 25 °C/+ 20 °C
3
3
2
2
2
2
- 40 °C/+ 20 °C
8
5
4
3
3
3
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
Current
Leakage current
(test conditions: UR, 20 °C)
After 2 min at UR
IL2  0.01 x CR x UR
or 3 μA
for UR  100 V (whichever is greater)
Resistance
Equivalent series resistance
(ESR)
Calculated from tan max.
ESR = tan /2  f CR
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz)
IR MULTIPLIER FOR UR  100 V
50
0.70
120
1.00
300
1.17
1000
1.36
 10 000
1.50
TEST PROCEDURES AND REQUIREMENTS
PROCEDURE
(quick reference)
TEST
Load life
Shelf life
Tamb = 105 °C
C/C: ± 20 % of initial value
UR and IR applied
IL  spec. limit
After 2000 h
tan   2 x spec. limit
No voltage applied
C/C: ± 20 % of initial value
After 1000 h
After test: UR to be applied for 30 min
24 h to 48 h before measurement
Revision: 18-Oct-12
REQUIREMENTS
IL  spec. limit
tan   2 x spec. limit
Document Number: 25003
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000