EPIC / MEPIC Design Guide www.vishay.com Vishay Sfernice Electro-Pyrotechnic Initiator Design Guide (EPIC / MEPIC) GENERAL Requirements for the Resistor Design case Electrical characteristics Case size (EPIC 0603, MEPIC 0805) Resistance value (ohms) Termination type SMD Tolerance on resistance (ohms) +/- Termination finish (EPIC Gold, MEPIC Tin) TCR (ppm/°C) if applicable +/- Operating Conditions needed Compatibility with pyrotechnic material (primer) Storage temperature Range (°C) Primer type Operating temperature Range (°C) Please specify sensibility (En./mass) (please refer to convenient unit) ”ALL FIRE” Performances Needed Capacitor discharge firing method ===> All Firing conditions Capacitance value (µF) Intensity of current (A) Voltage (V) Time (ms) Serial resistance if any (in Ohms) Energy (mJ) Expected ignition type Joule Effect Other please specify (A / ms / mJ) Flash Other please specify (A / ms / mJ) ”NO FIRE” Performances Needed Capacitor discharge firing method (if applicable) ===> No Firing conditions Capacitance value (µF) Intensity of current (A) Voltage (V) Time (ms) Serial resistance if any (in Ohms) Energy (mJ) Electro Static Discharge (ESD) No Firing conditions (long duration) Maximum applied voltage (kV) Intensity of current (A) Time (s) Other requirements if any Customer Process Header type (to be circled) Assembly Process Flat Header - Reflow soldering Header with pins - Printed Circuit Board - Lead wire header - Copper wires - Other Specify alloy type Specify max temperature (°C) Specify if rework requirements Conductive Glue Specify curing temperature (°C) Specify curing time (min) Primer W et process or Dry process ? Application method Cleaning process (please detail) Other hard process conditions Revision: 22-Jan-15 Document Number: 53045 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 EPIC / MEPIC Design Guide www.vishay.com Vishay Sfernice Customer / Application Information CUSTOMER NAME Type of Industry Mining - Automotive - Firework - Civil - Military - Other Contact Name Function Adress Phone E-mail Tel Project Name Application (please detail) Start of Production (Quarter / Year) Estimated quantity (1st year) Duration of project (nb of years) Estimated quantity (per year) Target unit price (including packaging) Revision: 22-Jan-15 € or $ Packaging type Document Number: 53045 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000