LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only DUAL COLOR LED LAMPS Pb Lead-Free Parts LHRFSWK31693/R21/A DATA SHEET DOC. NO : QW0905-LHRFSWK31693/R21/A REV. DATE : A : 15 -Mar- 2016 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LHRFSWK31693/R21/A Page 1/9 Package Dimensions 3.7 2.95 6.05 2.35 1.5 MAX HRF(S) WK 3.9 1 □0.5 TYP 18.0MIN 1 2 3 3 1. CATHODE WHITE 2. COMMON ANODE 3. CATHODE RED 2.0MIN 2.0MIN 2.54TYP 2 2.54TYP Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/9 PART NO. LHRFSWK31693/R21/A Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT HRF(S) WK Forward Current IF 30 30 mA Peak Forward Current Duty 1/10@10KHz IFP 60 100 mA Power Dissipation PD 72 80≤PD≤120 mW Ir 10 50 μA Electrostatic Discharge( * ) ESD 2000 500 V Operating Temperature Topr -40~ +85 -20~ +80 ℃ Storage Temperature Tstg -40~ +100 -30~ +100 ℃ Reverse Current @5V * Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. Typical Electrical & Optical Characteristics (Ta=25 ℃) COLOR PART NO LHRFSWK31693/R21/A PART NO LHRFSWK31693/R21/A MATERIAL Emitted Lens White Water Clear InGaN AlGaInP X 0.28 COLOR MATERIAL Forward voltage @20mA(V) Chromaticity Coordinates (Typ.) Emitted Lens Red Water Clear Luminous intensity @20mA(mcd) Y Typ. Max. Min. Typ. 0.28 3.5 4.0 1500 2700 Forward Dominant Spectral voltage wave halfwidth length @20mA(V) △λ nm λDnm Luminous intensity @ 20mA(mcd) Viewing angle 2θ 1/2 (deg) 25 Viewing angle 2θ 1/2 (deg) Min. Max. Min. Typ. 625 20 1.7 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. 2.6 2200 4000 10 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LHRFSWK31693/R21/A Page 3/9 .Bin Code WK Luminous Intensity(mcd) at 20mA Group Min. Max. A23 1500 1800 A24 1800 2200 A25 2200 2700 A26 2700 3400 A27 3400 4000 A28 4000 5000 HRF(S) Luminous Intensity(mcd) at 20mA Group Min. Max. A25 2200 2700 A26 2700 3400 A27 3400 4000 A28 4000 5000 A29 5000 6200 A30 6200 7700 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO.LHRFSWK31693/R21/A Page4/9 . Chromaticity Coordinates Specifications for Bin Grading BIN A1 A2 A3 A4 A5 X Y 0.21 0.190 BIN X Y BIN X Y 0.26 0.265 0.31 0.340 0.26 0.225 0.27 0.240 0.31 0.300 0.32 0.315 0.27 0.280 0.32 0.355 0.27 0.280 0.32 0.355 0.27 0.240 0.32 0.315 0.28 0.255 0.33 0.330 0.21 0.150 0.22 0.165 0.22 0.205 0.22 0.205 0.22 0.165 0.23 0.180 0.23 0.220 0.28 0.295 0.33 0.370 0.23 0.220 0.28 0.295 0.33 0.370 0.23 0.180 0.28 0.255 0.33 0.330 0.24 0.195 0.29 0.270 0.34 0.345 0.24 0.235 0.29 0.310 0.34 0.385 0.24 0.235 0.29 0.310 0.34 0.385 0.24 0.195 0.29 0.270 0.34 0.345 0.25 0.210 0.30 0.285 0.35 0.360 0.25 0.250 0.30 0.325 0.35 0.400 0.25 0.250 0.30 0.325 0.25 0.210 0.30 0.285 0.26 0.225 0.31 0.300 0.26 0.265 0.31 0.340 B1 B2 B3 B4 B5 Color Coordinates Measurement allowance is ±0.01. . CIE Chromaticity Diagram C1 C2 C3 C4 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LHRFSWK31693/R21/A Page5/9 Typical Electro-Optical Characteristics Curve HRF(S) CHIP Fig.2 Luminous Intensity vs. Forward Current 6.0 150 Luminous Intensity Normalize @20mA Forward Current(mA) Fig.1 Forward current vs. Forward Voltage 100 50 0 0 0.5 1.0 1.5 2.0 2.5 5.0 4.0 3.0 2.0 1.0 0.0 0 3.0 50 1.06 1.04 1.02 1.00 0.98 0.96 0.94 0 20 40 60 80 100 Fig.4 Luminous Intensity vs. Temperature Luminous Intensity@20mA Normalize @25℃ Forward Voltage@20mA Normalize @25℃ Fig.3 Forward Voltage vs. Temperature -20 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40 -20 0 20 40 60 80 100 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength Relative Intensity@20mA 150 Forward Current(mA) Forward Voltage(V) -40 100 Fig.6 Directivity Radiation 0° 1.0 -30° 30° -60° 0.5 0 550 600 650 Wavelength (nm) 700 100% 75% 50% 60° 25% 0 25% 50% 75% 100% LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 6/9 PART NO. LHRFSWK31693/R21/A Typical Electro-Optical Characteristics Curve WK CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1 01 2.5 2.0 1.5 1.0 0.5 0.0 2.0 1.0 3.0 5.0 4.0 1 10 Fig.4 Relative Intensity vs. Temperature 1.2 Relative Intensity@20mA Normalize @25℃ Forward Voltage@20mA Normalize @25℃ Fig.3 Forward Voltage vs. Temperature 1.1 1.0 0.9 0.8 -20 0 20 40 1000 Forward Current(mA) Forward Voltage(V) -40 100 60 80 3.0 2.5 2.0 1.5 1.0 0.5 0.0 100 -40 -20 0 20 40 60 80 100 Ambient Temperature( ℃) Ambient Temperature( ℃) Fig.5 Luminous Spectrum(Ta=25 ℃) Fig.6 Directivity Radiation 0° SPECTRAL RADIANCE -30° 30° 100 Intensity 80 -60° 60 60° 40 20 0 100% 75% 50% 400 500 600 Wavelength (nm) 700 800 25% 0 25% 50% 75% 100% LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LHRFSWK31693/R21/A Page 7/9 Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350 ° C Max Soldering Time:3 Seconds Max(One time only) Distance:2mm Min(From solder joint to body) 2.Wave Soldering Profile Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2° C/sec(max) Ramp-Down:-5° C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body) Temp(° C) 260° C3sec Max 260° 5° /sec max 120° 25° 0° 0 2° /sec max Preheat 60 Seconds Max 50 100 Note: 1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above. 150 Time(sec) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 8/9 PART NO. LHRFSWK31693/R21/A Reliability Test: Test Item Test Condition Description Reference Standard Operating Life Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5 ℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. High Temperature High Humidity Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95 % 3.t=240hrs ±2hrs The purpose of this test is the resistance of the device under tropical for hours. 1.Ta=105 ℃±5℃&-40 ℃±5℃ (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test 1.T.Sol=245 ℃±5℃ 2.Dwell time=5 ±1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 Thermal Shock Test JIS C 7021: B-12 MIL-STD-202:103B JIS C 7021: B-11 Page 9/9 PACKING SPECIFICATION 1.1000 PCS / BAG 2. 8 BAG / INNER BOX SIZE : L X W X H 33.5cm X 19cm X 7.5cm L W H 3. 12 INNER BOXES / CARTON SIZE : L X W X H 58.5cm X 34cm X 34cm L W C/NO: MADE IN CHINA . NO M IT E Y : Q'T ,: W : N, , W G, S PC s kg s kg