090 PUL-SI www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Power Ultra Long Life Snap-In FEATURES • • • • • 158 PUL-SI miniaturized 090 PUL-SI • • • 156 PUM-SI 85 °C Fig. 1 APPLICATIONS • General purpose, industrial, telecom and audio/video systems • Smoothing and filtering • Standard and switched mode power supplies • Energy storage in pulse systems QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) Rated capacitance range (E6 / E12 series), CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 105 °C Useful life at 105 °C Useful life at 40 °C, 1.9 x IR applied Shelf life at 0 V, 105 °C Based on sectional specification Climatic category IEC 60068 Useful life: 5000 h at +105 °C Miniaturized, very small dimensions High ripple current capability Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated with a blue sleeve Keyed polarity version available High reliability Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 VALUE 22 x 25 to 35 x 40 MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code (YYMM) • Name of manufacturer • Code for factory of origin • “-” sign to identify the negative terminal, visible from the top and side of the capacitor • Code number • Climatic category in accordance with IEC 60068 560 μF to 47 000 μF ± 20 % 25 V to 100 V -40 °C to +105 °C 2000 h 5000 h 125 000 h 500 h IEC 60384-4 / EN130300 40/105/56 SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 560 680 1000 1200 16 - 25 - 35 - 40 - 50 - 63 - 80 22 x 25 22 x 30 25 x 30 1500 - - - - - 22 x 25 - 1800 - - - - - - 2200 - - - - 22 x 25 22 x 30 2700 3300 - - - 22 x 25 22 x 30 3900 - - - 22 x 30 25 x 30 4700 - 22 x 25 22 x 30 22 x 30 5600 - - - 25 x 30 25 x 30 25 x 40 25 x 40 30 x 30 30 x 30 30 x 35 30 x 35 25 x 40 30 x 30 30 x 35 30 x 40 Revision: 26-Apr-16 25 x 30 25 x 40 25 x 40 100 22 x 25 22 x 30 25 x 30 25 x 40 30 x 30 30 x 35 30 x 40 35 x 40 - - 35 x 40 - - - Document Number: 28387 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 090 PUL-SI www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 6800 16 22 x 25 25 22 x 30 8200 - 25 x 30 - 40 25 x 40 30 x 30 30 x 35 30 x 40 35 25 x 30 50 30 x 30 63 30 x 40 80 - 100 - 30 x 35 35 x 40 - - 30 x 40 - - - 10 000 22 x 30 25 x 40 25 x 40 30 x 30 12 000 - 25 x 40 30 x 30 - - - - - - 15 000 25 x 30 30 x 35 30 x 40 30 x 40 35 x 40 - - - - 18 000 - - - 35 x 40 - - - - 22 000 25 x 40 30 x 30 35 x 40 35 x 40 - - - - - 27 000 30 x 35 - - - - - - - 33 000 30 x 40 - - - - - - - 39 000 - - - - - - - - 47 000 30 x 40 35 x 40 - - - - - - - DIMENSIONS in millimeters AND AVAILABLE FORMS TWO TERMINAL SNAP-IN ØD + Terminal L + 2 max. L 10 ± 0.1 - Terminal Bottom view 5.8 +0 - 1 mm Ø 2 ± 0.1 (2 x) The minus terminal can be marked with a black dot or with an imprinted “-” sign. Fig. 2 - Two terminal snap-in Fig. 3 - Mounting hole diagram THREE TERMINAL SNAP-IN ØD Ø 2 ± 0.1 (2 x) Ø 2.5 ± 0.1 + Terminal L L + 2 max. - Terminal Minus pole marking Bottom view 4 ± 0.5 The negative terminal has TWO pins which are BOTH electrically connected Fig. 4 - Three terminal snap-in Revision: 26-Apr-16 3.3 ± 0.1 4.75 ± 0.1 The 10 mm spacing of the 2 pin snap-in is used as the base layout 10 ± 0.1 and a third hole is added. The third hole is closer to the negative primary hole so that polarization is always maintained, together with added mechanical stability. Fig. 5 - Mounting hole diagram Document Number: 28387 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 090 PUL-SI www.vishay.com Vishay BCcomponents Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL 22 x 25 22 x 30 25 x 30 25 x 40 30 x 30 30 x 35 30 x 40 35 x 40 Ø Dmax. Lmax. MASS (g) PACKAGING QUANTITIES (units per box) 23 23 26 26 31 31 31 36 27 32 32 42 32 37 42 42 12 16 22 27 30 35 40 55 100 100 100 100 100 100 100 50 ORDERING EXAMPLE ELECTRICAL DATA SYMBOL CR IR IL5 ESR Z CARDBOARD BOX DIMENSIONS LxWxH (mm) 260 x 250 x 39 260 x 250 x 44 290 x 280 x 44 290 x 280 x 54 340 x 330 x 44 340 x 330 x 49 340 x 330 x 54 390 x 198 x 54 DESCRIPTION Rated capacitance at 100 Hz Rated RMS ripple current at 100 Hz or 10 kHz, 105 °C Max. leakage current after 5 minutes at UR Max. equivalent series resistance at 100 Hz (1) Max. impedance at 10 kHz Notes • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % (1) ESR at 120 Hz is approximately 0.95 x ESR 100 Hz Electrolytic capacitor 090 series 3300 μF/80 V; ± 20 % Nominal case size: Ø 30 mm x 40 mm 2-terminal snap-in: Ordering code: MAL209032332E3 Former 12NC: 2222 09032332 3-terminal snap-in: Ordering code: MAL209072332E3 Former 12NC: 2222 09072332 Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 16 25 35 CR 100 Hz (μF) 6800 10 000 15 000 22 000 22 000 27 000 33 000 47 000 4700 6800 8200 10 000 12 000 12 000 15 000 15 000 22 000 4700 6800 10 000 10 000 15 000 22 000 Revision: 26-Apr-16 NOMINAL CASE SIZE ØDxL (mm) 22 x 25 22 x 30 25 x 30 25 x 40 30 x 30 30 x 35 30 x 40 35 x 40 22 x 25 22 x 30 25 x 30 25 x 40 25 x 40 30 x 30 30 x 35 30 x 40 35 x 40 22 x 30 25 x 30 25 x 40 30 x 30 30 x 40 35 x 40 IR 100 Hz 105 °C (A) 2.8 3.4 3.6 4.5 3.7 4.2 4.7 4.8 2.6 3.2 3.4 4.3 4.3 3.7 4.2 4.8 5.1 2.8 3.0 3.9 3.2 4.1 4.2 IR 10 kHz 105 °C (A) 3.3 4.0 4.3 5.5 4.5 5.1 5.6 5.8 3.1 3.8 4.1 5.1 5.2 4.5 5.1 5.7 6.1 3.4 3.6 4.7 3.9 4.9 5.0 ORDERING CODE MAL2090....... IL5 5 min (μA) MAX. ESR 100 Hz (1) (m) MAX. Z 10 kHz (m) 2-TERM. SI 3-TERM. SI 222 324 484 708 708 868 1060 1508 236 341 411 501 601 601 751 751 1101 330 477 701 701 1051 1541 82 59 53 38 54 45 39 43 89 65 60 46 43 56 46 40 40 78 70 49 70 49 55 66 48 44 33 43 36 32 32 66 49 46 35 34 44 36 33 31 53 50 36 49 35 35 15682E3 15103E3 25153E3 25223E3 35223E3 35273E3 35333E3 45473E3 16472E3 16682E3 26822E3 26103E3 26123E3 36123E3 16153E3 36153E3 46223E3 10472E3 20682E3 20103E3 30103E3 30153E3 40223E3 55682E3 55103E3 65153E3 65223E3 75223E3 75273E3 75333E3 85473E3 56472E3 56682E3 66822E3 66103E3 66123E3 76123E3 56153E3 76153E3 86223E3 50472E3 60682E3 60103E3 70103E3 70153E3 80223E3 Document Number: 28387 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 090 PUL-SI www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 40 50 63 80 100 CR 100 Hz (μF) 3300 3900 4700 5600 6800 8200 10 000 10 000 15 000 18 000 2200 3300 3900 4700 4700 5600 6800 8200 10 000 15 000 1500 2200 2700 3300 3900 3900 4700 4700 5600 6800 8200 820 1000 1500 2200 2200 2700 3300 4700 560 680 1000 1500 1500 1800 2200 3300 Revision: 26-Apr-16 NOMINAL CASE SIZE ØDxL (mm) 22 x 25 22 x 30 22 x 30 25 x 30 25 x 40 30 x 30 30 x 35 30 x 40 35 x 40 35 x 40 22 x 25 22 x 30 25 x 30 25 x 30 25 x 40 25 x 40 30 x 30 30 x 35 30 x 40 35 x 40 22 x 25 22 x 30 25 x 30 25 x 40 25 x 40 30 x 30 30 x 30 30 x 35 30 x 35 30 x 40 35 x 40 22 x 25 22 x 30 25 x 30 25 x 40 30 x 30 30 x 35 30 x 40 35 x 40 22 x 25 22 x 30 25 x 30 25 x 40 30 x 30 30 x 35 30 x 40 35 x 40 IR 100 Hz 105 °C (A) 2.4 2.9 2.9 3.1 3.9 3.3 3.8 4.3 4.5 4.3 2.1 2.6 2.8 2.9 3.6 3.6 3.1 3.5 4.0 4.0 2.1 2.6 2.8 3.5 3.6 3.1 3.1 3.6 3.5 4.0 4.3 1.5 1.8 2.1 2.8 2.5 2.8 3.2 3.4 1.4 1.6 1.9 2.5 2.3 2.6 3.0 3.2 IR 10 kHz 105 °C (A) 2.9 3.4 3.5 3.7 4.7 3.9 4.5 5.1 5.4 5.1 2.6 3.2 3.4 3.5 4.3 4.4 3.7 4.2 4.7 4.9 2.5 3.1 3.4 4.2 4.3 3.8 3.7 4.3 4.2 4.7 5.1 1.8 2.1 2.6 3.3 3.0 3.4 3.8 4.1 1.6 1.9 2.3 3.1 2.7 3.2 3.6 3.8 ORDERING CODE MAL2090....... IL5 5 min (μA) MAX. ESR 100 Hz (1) (m) MAX. Z 10 kHz (m) 2-TERM. SI 3-TERM. SI 265 313 377 449 545 657 801 801 1201 1441 221 331 391 471 471 561 681 821 1001 1501 190 279 342 417 493 493 594 594 707 858 1035 133 161 241 353 353 433 529 753 113 137 201 301 301 361 441 661 99 76 71 69 51 69 56 48 50 54 145 101 93 85 71 66 83 68 58 63 161 114 101 79 71 89 88 74 71 61 61 244 196 145 101 119 98 81 75 269 216 163 111 130 108 90 81 70 54 51 50 38 49 41 36 35 35 106 76 71 70 55 51 65 54 46 45 126 90 81 63 58 74 71 61 59 51 50 184 146 113 79 96 79 66 63 184 146 114 79 98 80 68 64 17332E3 17392E3 17472E3 27562E3 27682E3 37822E3 17103E3 37103E3 47153E3 47183E3 11222E3 11332E3 21392E3 31472E3 21472E3 21562E3 31682E3 31822E3 31103E3 41153E3 18152E3 18222E3 28272E3 28332E3 28392E3 38392E3 18472E3 38472E3 38562E3 38682E3 48822E3 12821E3 12102E3 22152E3 22222E3 32222E3 32272E3 32332E3 42472E3 19561E3 19681E3 29102E3 29152E3 39152E3 39182E3 39222E3 49332E3 57332E3 57392E3 57472E3 67562E3 67682E3 77822E3 57103E3 77103E3 87153E3 87183E3 51222E3 51332E3 61392E3 71472E3 61472E3 61562E3 71682E3 71822E3 71103E3 81153E3 58152E3 58222E3 68272E3 68332E3 68392E3 78392E3 58472E3 78472E3 78562E3 78682E3 88822E3 52821E3 52102E3 62152E3 62222E3 72222E3 72272E3 72332E3 82472E3 59561E3 59681E3 69102E3 69152E3 79152E3 79182E3 79222E3 89332E3 Document Number: 28387 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 090 PUL-SI www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage Us = 1.15 x UR Urev 1 V Reverse voltage Current Leakage current After 1 min at UR IL1 0.006 CR x UR + 4 μA After 5 min at UR IL5 0.002 CR x UR + 4 μA Inductance Equivalent series inductance (ESL) Typ. 19 nH All case sizes Max. 25 nH RIPPLE CURRENT AND USEFUL LIFE MGA 454 2.7 IA IR 2.6 2.5 2.4 2.3 2.2 2.1 2.0 1.9 1 2 life multiplier 5 2. 3 1.7 2 1. 5 1. 1.8 4 5 1.6 7 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz and 105 °C (1) Useful life at 105 °C and IR applied: 5000 h 20 30 40 60 0 10 0 15 0 20 0 30 0 40 0 60 1.4 1.3 10 15 1.5 1.2 1.1 1.0 0.8 0.5 0.0 40 50 60 (1) 70 80 90 100 110 Tamb (°C) Fig. 6 - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: 26-Apr-16 Document Number: 28387 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 090 PUL-SI www.vishay.com Vishay BCcomponents Table 3 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) UR = 25 V TO 100 V 50 0.91 100 1.00 200 1.05 400 1.09 1000 1.13 2000 1.15 4000 1.18 10 000 1.22 Table 4 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS C/C: ± 15 % Endurance IEC 60384-4 / EN130300 subclause 4.13 Tamb = 105 °C; UR applied; 2000 h ESR 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit C/C: ± 20 % ESR 3 x spec. limit Z 3 x spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 105 °C; UR and IR applied; 5000 h IL5 spec. limit no short or open circuit, no visible damage total failure percentage: UR:1 % Shelf life (storage at high temperature) Revision: 26-Apr-16 IEC 60384-4 / EN130300 subclause 4.17 Tamb = 105 °C; no voltage applied; 500 h C/C: ± 15 % After test: UR to be applied for 30 min, 24 h to 48 h before measurement IL5 2 x spec. limit ESR 1.5 x spec. limit Document Number: 28387 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000