KSMD4P25 KERSMI ELECTRONIC CO.,LTD. - 250V P-channel MOSFET Description This P-channel MOSFET s use advanced trench technology and design to provide excellent RDS(on) with low gate charge. It can be used in a wide variety of applications. Features 1) 2) 3) 4) BVDSS RDSON ID -250V 2.1Ω -3.1A Low gate charge. Green device available. Advanced high cell denity trench technology for ultra RDS(ON) Excellent package for good heat dissipation. TO-252 Absolute Maximum Ratings TC=25℃,unless otherwise noted Symbol Parameter Ratings Units VDS Drain-Source Voltage -250 VGS Gate-Source Voltage ±20 V V Continuous Drain Current-1 -3.1 Continuous Drain Current-T=100℃ -1.96 Pulsed Drain Current2 -12.4 EAS Single Pulse Avalanche Energy3 280 PD Power Dissipation4 45 TJ, TSTG Operating and Storage Junction Temperature Range -55 to +150 ID A mJ W ℃ Thermal Characteristics www.kersemi.com 1 KSMD4P25 KERSMI ELECTRONIC CO.,LTD. - 250V P-channel MOSFET Symbol Parameter Ratings RƟJC Thermal Resistance ,Junction to Case1 2.78 RƟJA Thermal Resistance, Junction to Ambient1 110 Units ℃/W Package Marking and Ordering Information Part NO. Marking Package KSMD4P25 KSMD4P25 TO-252 Electrical Characteristics TC=25℃ Symbol Parameter unless otherwise noted Conditions Min Typ Max Units Off Characteristics BVDSS Drain-Sourtce Breakdown Voltage VDS=0V,ID=250μA -250 — — IDSS Zero Gate Voltage Drain Current VDS=0V, VDS=32V — — -1 IGSS Gate-Source Leakage Current VDS=±20V, VDS=0A — — ±100 v μA nA VDS=VDS, ID=250μA -3.0 — -5.0 V VDS=10V,ID=6A — 1.63 2.1 VDS=2.5V,ID=5A — — — VDS=5V,ID=12A — 2.0 — — 325 420 — 65 85 — 10 13 — 9.5 30 — 60 130 — 14 40 On Characteristics VGS(th) RDS(ON) GFS GATE-Source Threshold Voltage Drain-Source On Resistance² Forward Transconductance Ω --S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS=15V,VGS=0V, f=1MHz pF Switching Characteristics td(off) Turn-Off Delay Time tf Fall Time — 27 65 Qg Total Gate Charge — 10.3 14 Qgs Gate-SourceCharge VGS=4.5V, VDS=20V, — 2.7 — Qgd Gate-Drain “Miller” Charge ID=6A — 5.2 — ns ns ns ns nC nC nC — — -5.0 V — 140 — ns — 0.64 — nC td(on) Turn-On Delay Time tr Rise Time VDS=20V, VGS=10V,RGEN=3.3Ω Drain-Source Diode Characteristics VSD Source-Drain Diode ForwardVoltage² trr Reverse Recovery Time Qrr Reverse Recovery Charge VGS=0V,IS =1A IF=7A,di/dt=100A/μS www.kersemi.com 2 KSMD4P25 KERSMI ELECTRONIC CO.,LTD. - 250V P-channel MOSFET Notes: 1. The data tested by surface mounted on a 1 inch²FR-4 board 2OZ copper. 2. The data tested by pulse width≤300us,duty cycle≤2% 3. The EAS data shows Max.rating.The test condition is VDD=25v,VGS=10V,L=0.1mH,iAS=17.8A 4. The power dissipation is limited by 150℃ junction temperature. Typical Characteristics TJ=25℃ unless otherwise noted Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics Figure 3. On-Resistance Variation vs. Drain Current and Gate Voltage Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperature www.kersemi.com 3 KSMD4P25 KERSMI ELECTRONIC CO.,LTD. - 250V P-channel MOSFET Figure 5. Capacitance Characteristics Figure 7.Breakdown Voltage Variation vs. Temperature Figure 6. Gate Charge Characteristics Figure 8.Maximum Safe Operating Area Figure 9. Transient Thermal Response Curve www.kersemi.com 4