KSMD3P20 KERSMI ELECTRONIC CO.,LTD. - 200V P-channel MOSFET Description This P-channel MOSFET s use advanced trench technology and design to provide excellent RDS(on) with low gate charge. It can be used in a wide variety of applications. Features 1) 2) 3) 4) BVDSS RDSON ID -200V 2.7Ω -2.4A Low gate charge. Green device available. Advanced high cell denity trench technology for ultra RDS(ON) Excellent package for good heat dissipation. TO-252 Absolute Maximum Ratings TC=25℃,unless otherwise noted Symbol Parameter Ratings Units VDS Drain-Source Voltage -200 VGS Gate-Source Voltage ±20 V V Continuous Drain Current-1 -2.4 Continuous Drain Current-T=100℃ -1.52 Pulsed Drain Current2 -9.6 EAS Single Pulse Avalanche Energy3 150 PD Power Dissipation4 37 TJ, TSTG Operating and Storage Junction Temperature Range -55 to +150 ID A mJ W ℃ Thermal Characteristics www.kersemi.comP 1 KSMD3P20 KERSMI ELECTRONIC CO.,LTD. - 200V P-channel MOSFET Symbol Parameter Ratings RƟJC Thermal Resistance ,Junction to Case1 3.4 RƟJA Thermal Resistance, Junction to Ambient1 110 Units ℃/W Package Marking and Ordering Information Part NO. Marking Package KSMD3P20 KSMD3P20 TO-252 Electrical Characteristics TC=25℃ Symbol Parameter unless otherwise noted Conditions Min Typ Max Units Off Characteristics BVDSS Drain-Sourtce Breakdown Voltage VDS=0V,ID=250μA -200 — — IDSS Zero Gate Voltage Drain Current VDS=0V, VDS=32V — — -1 IGSS Gate-Source Leakage Current VDS=±20V, VDS=0A — — ±100 v μA nA VDS=VDS, ID=250μA -3.0 — -5.0 V VDS=10V,ID=6A — 2.0 6 2.7 VDS=2.5V,ID=5A — — — VDS=5V,ID=12A — 1.1 8 — — 190 250 — 45 60 — 7.5 10 — 8.5 25 — 35 80 — 12 35 On Characteristics VGS(th) GATE-Source Threshold Voltage RDS(ON) Drain-Source On Resistance² GFS Forward Transconductance Ω --S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS=15V,VGS=0V, f=1MHz pF Switching Characteristics td(off) Turn-Off Delay Time tf Fall Time — 25 60 Qg Total Gate Charge — 6.0 8.0 Qgs Gate-SourceCharge VGS=4.5V, VDS=20V, — 1.7 — Gate-Drain “Miller” Charge ID=6A — 2.9 — ns ns ns ns nC nC nC — — -5.0 V — 100 — ns — 0.3 4 — nC td(on) Turn-On Delay Time tr Rise Time Qgd VDS=20V, VGS=10V,RGEN=3.3Ω Drain-Source Diode Characteristics VSD Source-Drain Diode ForwardVoltage² trr Reverse Recovery Time Qrr Reverse Recovery Charge VGS=0V,IS =1A IF=7A,di/dt=100A/μS www.kersemi.comP 2 KSMD3P20 KERSMI ELECTRONIC CO.,LTD. - 200V P-channel MOSFET Notes: 1. The data tested by surface mounted on a 1 inch²FR-4 board 2OZ copper. 2. The data tested by pulse width≤300us,duty cycle≤2% 3. The EAS data shows Max.rating.The test condition is VDD=25v,VGS=10V,L=0.1mH,iAS=17.8A 4. The power dissipation is limited by 150℃ junction temperature. Typical Characteristics TJ=25℃ unless otherwise noted Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics Figure 3. On-Resistance Variation vs. Drain Current and Gate Voltage Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperature www.kersemi.comP 3 KSMD3P20 KERSMI ELECTRONIC CO.,LTD. - 200V P-channel MOSFET Figure 5. Capacitance Characteristics Figure 7.Breakdown Voltage Variation vs. Temperature Figure 6. Gate Charge Characteristics Figure 8.Maximum Safe Operating Area Figure 9. Transient Thermal Response Curve www.kersemi.comP 4