2016 Products Catalog Aluminum Electrolytic Capacitors Surface mount type 2016.04 http://industrial.panasonic.com/ww/products/capacitors/aluminum-capacitors/aluminum-cap-smd ——— Notices ——— ■ Applicable Laws and Regulations ● This product complies with the RoHS Directive (Restriction of the use of certain Hazardous substances in electrical and electronic equipment (DIRECTIVE 2011/65/EU). ● No Ozone Depleting Chemicals(ODC's), controlled under the Montreal Protocol Agreement, are used in producing this product. ● We do not PBBs or PBDEs as brominated flame retardants. ● Export procedure which followed export related regulations, such as foreign exchange and a foreign trade method, on the occasion of export of this product Thank you for your consideration. ■ Limited applications ● This capacitor is designed to be used for electronics circuits such as audio/visual equipment, home appliances, computers and other office equipment, optical equipment, measuring equipment. ● High reliability and safety are required [ be / a possibility that incorrect operation of this product may do harm to a human life or property ] more. When use is considered by the use, the delivery specifications which suited the use separately need to be exchanged. ——— Items to be observed ——— ● This specification guarantees the quality and performance of the product as individual components. Before use, check and evaluate their compatibility with installed in your products. ● Do not use the products beyond the specifications described in this document. ■ For specifications ● Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other signification damage, such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/ gas equipment, rotating rotating equipment, and disaster/crime prevention equipment. · The system is equipped with a protection circuit and protection device. · The system is equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault. ■ Conditions of use ● Before using the products, carefully check the effects on their quality and performance, and determined whether or not they can be used. These products are designed and manufactured for general-purpose and standard use in general electronic equipment. These products are not intended for use in the following special conditions. (1) In liquid, such as Water, Oil, Chemicals, or Organic solvent. (2) In direct sunlight, outdoors, or in dust. (3) In vapor, such as dew condensation water of resistive element, or water leakage, salty air, or air with a high concentration corrosive gas, such as Cl2, H2S, NH3, SO2, or NOx. (4) In an environment where strong static electricity or electromagnetic waves exist. (5) Mounting or placing heat-generating components or inflammables, such as vinyl-coated wires, near these products. (6) Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin and other material. (7) Using resolvent, water or water-soluble cleaner for flux cleaning agent after soldering. (In particular, when using water or a water-soluble cleaning agent, be careful not to leave water residues) (8) Using in the atmosphere which strays Acid or alkaline. (9) Using in the atmosphere which there are excessive vibration and shock. ● Please arrange circuit design for preventing impulse or transitional voltage. Do not apply voltage, which exceeds the full rated voltage when the capacitors receive impulse voltage, instantaneous high voltage, high pulse voltage etc. ● Our products there is a product are using an electrolyte solution. Therefore, misuse can result in rapid deterioration of characteristics and functions of each product. Electrolyte leakage damages printed circuit and affects performance, characteristics, and functions of customer system. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Nov. 2015 Aluminum Electrolytic Capacitors (SMD Type) Application Guidelines (SMD Type) 1. Circuit design 1.1 Operating Temperature and Frequency Electrical parameters for electrolytic capacitors are normally specified at 20 °C temperature and 120 Hz frequency. These parameters vary with changes in temperature and frequency. Circuit designers should take these changes into consideration. (1) Effects of operating temperature on electrical parameters (a) At higher temperatures, leakage current and capacitance increase while equivalent series resistance (ESR) decreases. (b) At lower temperatures, leakage current and capacitance decrease while equivalent series resistance (ESR) increases. (2) Effects of frequency on electrical parameters (a) At higher frequencies, capacitance and impedance decrease while tan d increases. (b) At lower frequencies, heat generated by ripple current will rise due to an increase in equivalent series resistance (ESR). 1.2 Operating Temperature and Life Expectancy (1) Expected life is affected by operating temperature. Generally, each 10 °C reduction in temperature will double the expected life. Use capacitors at the lowest possible temperature below the upper category temperature. (2) If operating temperatures exceed the upper category limit, rapid deterioration of electrical parameter will occur and irreversible damage will result. Check for the maximum capacitor operating temperatures including ambient temperature, internal capacitor temperature rise due to ripple current, and the effects of radiated heat from power transistors, IC's or resistors. Avoid placing components, which could conduct heat to the capacitor from the back side of the circuit board. (3) The formula for calculating expected life at lower operating temperatures is as follows ; L2 = L1×2 ( T10-T ) 1 2 L1 : Guaranteed life (h) at temperature, T1 °C L2 : Expected life (h) at temperature, T2 °C T1 : Upper category temperature (°C) T2 : Actual operating temperature, ambient temperature + temperature rise due to ripple current (°C) (4) Please use according to the lifetime as noted in this specification. Using products beyond end of the lifetime may change characteristics rapidly, short-circuit, operate pressure relief vent, or leak electrolyte. 1.3 Common Application Conditions to Avoid The following misapplication load conditions will cause rapid deterioration of a capacitor’s electrical parameters. In addition, rapid heating and gas generation within the capacitor can occur, causing the pressure relief vent to operate and resultant leakage of electrolyte. Under extreme conditions, explosion and fire ignition could result. The leaked electrolyte is combustible and electrically conductive. (1) Reverse Voltage DC capacitors have polarity. Therefore, please do not apply the reverse voltage. Verify correct polarity before insertion. For circuits with changing or uncertain polarity, use DC bipolar capacitors. DC bipolar capacitors are not suitable for use in AC circuits. (2) Charge / Discharge Applications Standard capacitors are not suitable for use in repeating charge/discharge applications. For charge/ discharge applications, consult us with your actual application condition. For rush current, please to not exceed 100 A. (3) ON-OFF circuit Do not use capacitors in circuit where ON-OFF switching is repeated more than 10000 times/per day. In case of applying to the theses ON-OFF circuit, consult with us about circuit condition and so on. (4) Over voltage Do not apply voltages exceeding the maximum specified rated voltage. Voltages up to the surge voltage rating are acceptable for short periods of time. Ensure that the sum of the DC voltage and the superimposed AC ripple voltage does not exceed the rated voltage. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) (5) Ripple Current Do not apply ripple currents exceeding the maximum specified value. For high ripple current applications, use a capacitor designed for high ripple currents. In addition, consult us if the applied ripple current is to be higher than the maximum specified value. Ensure that rated ripple currents that superimposed on low DC bias voltages do not cause reverse voltage conditions. Even if it is within a rated ripple current, in case the practical use is over the pre described endurance life time, it causes the increase of deterioration of ESR characteristic and the internal generation heat by ripple current. Due to this, there is some possibility of vent open, bulging of sleeve and rubber, electrolyte leakage, and shot circuit, explosion and ignition in the worst case. 1.4 Using Two or More Capacitors in Series or Parallel (1) Capacitors Connected in Parallel The circuit resistance can closely approximate the series resistance of the capacitor, causing an imbalance of ripple current loads within the capacitors. Careful wiring methods can minimize the possible application of an excessive ripple current to a capacitor. (2) Capacitors Connected in Series Differences in normal DC leakage current among capacitors can cause voltage imbalances. The use of voltage divider shunt resistors with consideration to leakage currents can prevent capacitor voltage imbalances. NOTE : Please do not use in the series in the case of conductive polymer hybrid aluminum electrolytic capacitor. 1.5 Capacitor Mounting Considerations (1) Double-Sided Circuit Boards Avoid wiring pattern runs, which pass between the mounted capacitor and the circuit board. (2) Clearance for Case Mounted Pressure Relief (> 010 mm) Capacitors with case mounted pressure relief require sufficient clearance to allow for proper pressure relief operation. The minimum clearance are dependent on capacitor diameters as follows. (Dia 10 mm to Dia 16 mm : 2 mm minimum, Dia 18 mm : 3 mm minimum) (3) Wiring Near the Pressure Relief (> 010 mm) Avoid locating high voltage or high current wiring or circuit board paths above the pressure relief. Flammable, high temperature gas that exceeds 100 °C may be released which could dissolve the wire insulation and ignite. (4) Circuit Board Patterns Under the Capacitor Avoid circuit board runs under the capacitor, as an electrical short can occur due to an electrolyte leakage. 1.6 Electrical Isolation of the Capacitor Completely isolate the capacitor as follows. Between the cathode and the case and between the anode terminal and other circuit paths. 1.7 Capacitor Coating The laminate coating is intended for marking and identification purposes and is not meant to electrically insulate the capacitor. 2. Capacitor Handling Techniques 2.1 Considerations Before Using (1) Capacitors have a finite life. Do not reuse or recycle capacitors from used equipment. (2) Transient recovery voltage may be generated in the capacitor due to dielectric absorption. If required, this voltage can be discharged with a resistor with a value of about 1 kΩ. (3) Capacitors stored for a long period of time may exhibit an increase in leakage current. This can be corrected by gradually applying rated voltage in series with a resistor of approximately 1 kΩ. (4) If capacitors are dropped, they can be damaged mechanically or electrically. Avoid using dropped capacitors. (5) Dented or crushed capacitors should not be used. The seal integrity can be damaged and loss of electrolyte/ shortened life can result. 2.2 Capacitor Insertion (1) (2) (3) (4) Verify the correct capacitance and rated voltage of the capacitor. Verify the correct polarity of the capacitor before insertion. Verify the correct hole spacing and land pattern size before insertion to avoid stress on the terminals. Excessive mounting pressure can cause high leakage current, short circuit, or disconnection. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) 2.3 Reflow Soldering (1) Surface-mount type capacitor are exclusively for reflow soldering. When reflow solder is used an ambient heat condition system such as the simultaneous use of infrared and hot-air is recommended. (2) Observe proper soldering conditions (temperature, time, time of reflow, etc.). Do not exceed the specified limits. ✽ The Temperature on Capacitor top shall be measured by using thermal couple that is fixed firmly by epoxy glue. (3) In case of use in 2 times reflow, 2nd reflow must be done when the capacitor’s temperature return back to normal level. (4) In our recommended reflow condition, the case discoloration and the case swelling might be slightly generated. But please acknowledge that these two phenomena do not influence the reliability of the product. (5) The crack on top marking might be occurred by reflow heat stress. But please acknowledge that it does not influence the reliability of the product. (6) VPS (Vapor Phase Soldering) reflow can cause significant characteristics change and/ or mounting failure due to deformation by acute temperature rise. VPS is acceptable provided that the process does not exceed recommended reflow profile and temperature rise is less than 3 degC/ sec. Please contact Panasonic for detailed conditions. 2.4 Manual Soldering (1) Observe temperature and time soldering specifications or do not exceed temperature of 350 °C for 3 seconds or less. (2) If a soldered capacitor must be removed and reinserted, avoid excessive stress on the capacitor leads. (3) Avoid physical contacts between the tip of the soldering iron and capacitors to prevent or capacitor failure. 2.5 Capacitor Handling after Soldering (1) Avoid moving the capacitor after soldering to prevent excessive stress on the lead wires where they enter the seal. (2) Do not use the capacitor as a handle when moving the circuit board assembly. (3) Avoid striking the capacitor after assembly to prevent failure due to excessive shock. 2.6 Circuit Board Cleaning (1) Circuit boards can be immersed or ultrasonically cleaned using suitable cleaning solvents for up to 5 minutes and up to 60 °C maximum temperatures. The boards should be thoroughly rinsed and dried. The use of ozone depleting cleaning agents is not recommended for the purpose of protecting our environment. (2) Avoid using the following solvent groups unless specifically allowed in the specification ; (a) Halogenated cleaning solvents: except for solvent resistant capacitor types, halogenated solvents can permeate the seal and cause internal capacitor corrosion and failure. For solvent resistant capacitors, carefully follow the temperature and time requirements based on the specification. 1,1,1-trichloroethane should never be used on any aluminum electrolytic capacitor. (b) Alkaline solvents : could react and dissolve the aluminum case. (c) Petroleum based solvents : deterioration of the rubber seal could result. (d) Xylene : deterioration of the rubber seal could result. (e) Acetone : removal of the ink markings on the vinyl sleeve could result. (3) A thorough drying after cleaning is required to remove residual cleaning solvents that may be trapped between the capacitor and the circuit board. Avoid drying temperatures, which exceed the Upper category temperature of the capacitor. 4) Monitor the contamination levels of the cleaning solvents during use in terms of electrical conductivity, pH, specific gravity, or water content. Chlorine levels can rise with contamination and adversely affect the performance of the capacitor. 5) Depending on the cleaning method, the marking on a capacitor may be erased or blurred. Please consult us if you are not certain about acceptable cleaning solvents or cleaning methods. 2.7 Mounting Adhesives and Coating Agents When using mounting adhesives or coating agents to control humidity, avoid using materials containing halogenated solvents. Also, avoid the use of chloroprene based polymers. Harden on dry adhesive or coating agents well lest the solvent should be left. After applying adhesives or coatings, dry thoroughly to prevent residual solvents from being trapped between the capacitor and the circuit board. 2.8 Fumigation In exporting electronic appliances with aluminum electrolytic capacitors, in some cases fumigation treatment using such halogen compound as methyl bromide is conducted for wooden boxes. If such boxes are not dried well, the halogen left in the box is dispersed while transported and enters in the capacitors inside. This possibly causes electrical corrosion of the capacitors. Therefore, after performing fumigation and drying make sure that no halogen is left. Don’t perform fumigation treatment to the whole electronic appliances packed in a box. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) 3. Precautions for using capacitors 3.1 Environmental Conditions Capacitors should not be used in the following environments. (1) Exposure to temperatures above the upper category or below the lower category temperature of the capacitor. (2) Direct contact with water, salt water, or oil. (3) High humidity conditions where water could condense on the capacitor. (4) Exposure to toxic gases such as hydrogen sulfide, sulfuric acid, nitric acid, chlorine, Chlorine compound, Bromine, Bromine compound or ammonia. (5) Exposure to ozone, radiation, or ultraviolet rays. (6) Vibration and shock conditions exceeding specified requirements. 3.2 Electrical Precautions (1) Avoid touching the terminals of a capacitor as a possible electric shock could result. The exposed aluminum case is not insulated and could also cause electric shock if touched. (2) Avoid short circuiting the area between the capacitor terminals with conductive materials including liquids such as acids or alkaline solutions. (3) A low-molecular-weight-shiroxane which is included in a silicon material shall causes abnormal electrical characteristics. 4. Emergency Procedures (1) If the pressure relief of the capacitor operates, immediately turn off the equipment and disconnect from the power source. This will minimize an additional damage caused by the vaporizing electrolyte. (2) Avoid contact with the escaping electrolyte gas, which can exceed 100 °C temperatures. If electrolyte or gas enters the eye, immediately flush the eye with large amounts of water. If electrolyte or gas is ingested by mouth, gargle with water. If electrolyte contacts the skin, wash with soap and water. 5. Long Term Storage Leakage current of a capacitor increases with long storage times. The aluminum oxide film deteriorates as a function of temperature and time. If used without reconditioning, an abnormally high current will be required to restore the oxide film. This surge current could cause the circuit or the capacitor to fail. Expiration date is 42 months from outgoing inspection date. However, expiration date for series which are not listed below is 12 months from outgoing inspection date. Series S (only High temperature reflow) HA (only High temperature reflow) HB (only High temperature reflow and 5.4 mm height) HC, HD, FCA, FC, FKA, FK, FKS, FP, FT, TG, TK, TP, TC, TCU, TQ Expiration date 42 months from outgoing inspection date For storage condition, keep room temperature (5 °C to 35 °C) and humidity (45 % to 85 %) where direct sunshine doesn't reach. 5.1 Environmental Conditions Do (1) (2) (3) (4) not store under condition outside the area described in the specification, and also under conditions listed below. Exposure to temperatures above the upper category or below the lower category temperature of the capacitor. Direct contact with water, salt water, or oil. High humidity conditions where water could condense on the capacitor. Exposure to toxic gases such as hydrogen sulfide, sulfuric acid, nitric acid, chlorine, Chlorine compound, Bromine, Bromine compound or ammonia. (5) Exposure to ozone, radiation, or ultraviolet rays. (6) Vibration and shock conditions exceeding specified requirements. 6. Capacitor Disposal When disposing capacitors, use one of the following methods. (1) Incinerate after crushing the capacitor or puncturing the can wall (to prevent explosion due to internal pressure rise). (2) Dispose as solid waste. NOTE : Local laws may have specific disposal requirements which must be followed. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Jun. 2016 Aluminum Electrolytic Capacitors (SMD Type) Diagram ◼ Surface mount type NEW High temperature · Long life TCU series NEW TC series 125 °C 3000 h 125 °C 2000 h to 3000 h TQ series TP series TK series TG series 125 °C 2000 h 125 °C 2000 h to 3000 h 125 °C 3000 h 125 °C 1000 h to 2000 h Low impedance HD series 105 °C 5000 h Upgrade NEW FT series FKS series HC series EB series (Large can) 105 °C 3000 h to 5000 h 105 °C 3000 h to 5000 h HB series HB series (5.4 L) 105 °C 2000 h 105 °C 2000 h 105 °C 2000 h to 5000 h 105 °C 2000 h FP series FK series FC series HA series 105 °C 2000 h 105 °C 2000 h to 5000 h 105 °C 1000 h 105 °C 1000 h S series 85 °C 1000 h to 2000 h Low impedance ◼ Radial lead type Long Life · High ripple EE series TP series 105 °C 8000 h to 10000 h 135 °C/1000 h to 2000 h 125 °C/2000 h to 5000 h EB series TA series 105 °C 5000 h to 10000 h 125 °C 2000 h FR series FM series HD series 105 °C 5000 h to 10000 h 105 °C 2000 h to 7000 h 105 °C 1000 h to 2000 h FK series FC series NHG series GA series (7L) GA series Bi-polar 105 °C 3000 h to 5000 h 105 °C 1000 h to 5000 h 105 °C 1000 h to 2000 h 105 °C 1000 h 105 °C 1000 h to 2000 h M series SU series Bi-polar 85 °C 2000 h 85 °C 2000 h KS/KA series KS/KA series Bi-polar 85 °C 1000 h 85 °C 1000 h Miniaturized Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Recommendable reflow soldering compliant Parts upper part temperature (°C) ● RoHS 260 250 Peak temperature 230 200 160 °C 150 120(s) Time in (✽1)°C or more 100 50 Time Lead-Free reflow Reflow No. Fig. (1) Fig. (2) Fig. (3) Fig. (4) Category 04 to 06.3 08 to 010 Peak temperature 250 °C 235 °C 230 °C (220 °C) 230 °C Time in peak temperature 5 s 5 s 5 s (5 s) 5 s EB series 012.5 to 018 (010 to 018) °C 20 s 200 °C 20 s Time in (✽1) °C or more >200 °C 60 s >200 °C 60 s >200(30 > s) Time of reflow 1 time 1 time 1 time 1 time High temperature Lead-Free reflow Reflow No. Fig. (5) Fig. (6) Fig. (7) Category 04 to 06.3 08 to 010 08 to 010 Fig. (8) 06.3 to 010 (TK・TP series) 260 °C 245 °C 260 °C 250 °C 260 °C 255 °C 260 °C (255 °C) 250 °C 5 s Time in peak temperature > >240 °C 10 s >250 °C 5 s >240 °C 10 s >250 °C 5 s >250 °C 30 s >250 °C 20 s (10 s) >230 °C 30 s >230 °C 30 s >230 °C 30 s >230 °C 30 s >230 °C 30 s >230 °C 40 s >230 °C 30 s Peak temperature Time in (✽1) °C or more >217 °C 40 s >217 °C 40 s >217 °C 40 s >217 °C 40 s >217 °C 40 s >217 °C 65 s >217 °C 65 s >200 °C 70 s >200 °C 70 s >200 °C 70 s >200 °C 70 s >200 °C 70 s >200 °C 90 s >200 °C 70 s Time of reflow Reflow No. 2 times 2 times 1 time 2 times 1 time 2 times 2 times Peak temperature Fig. (9) 012.5 to 018 (FK, TK, HD series) 6.3 V.DC to 35 V.DC 245 °C Fig. (10) 012.5 to 018 (FK series) 50 V.DC to 63 V.DC (TK series) 50 V.DC 245 °C Fig. (11) 012.5 to 018 (FK series) 80 V.DC to 100 V.DC (TK series) 63 V.DC to 100 V.DC 245 °C Time in peak temperature >240 °C 30 s >240 °C 5 s >240 °C 5 s Time in (✽1) °C or more >217 °C 90 s >217 °C 30 s >217 °C 30 s Time of reflow 2 times 2 times 1 time Category ✽ For reflow, use a thermal condition system such as infrared radiation (IR) or hot blast. ✽ Panasonic have several series available for pure Tin terminal and ZVEI reflow based on J-STD-020D (JEDEC). (Please contact sales for details.) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Dimensions (Vibration-proof products) A±0.2 – K F (I) ✽ The size and shape are different from standard products. Please inquire details of our company. (Unit : mm) (P) R + L✽ T (I) (S) B±0.2 H D±0.5 Size 0D L code F I W P K R S T E 8.0 6.5 8.3 9.5 0 to +0.15 3.4 0.7±0.1 2.2 0.35+0.15 –0.20 0.70±0.2 5.3±0.2 1.7±0.2 F 8.0 10.5 8.3 10.0 0 to +0.15 3.4 1.2±0.2 3.1 0.70±0.2 0.70±0.2 5.3±0.2 1.3±0.2 G 10.0 10.5 10.3 12.0 0 to +0.15 3.5 1.2±0.2 4.6 0.70±0.2 0.70±0.2 6.9±0.2 1.3±0.2 H13 12.5 13.8 13.5 15.0 –0.1 to +0.15 4.7 1.2±0.2 4.4 0.70±0.3 2.2±0.2 7.1±0.2 2.4±0.2 W ✽ E to G : L±0.3 H13 to K16 : L±0.5 A, H B max. J16 16.0 16.8 17.0 19.0 –0.1 to +0.15 5.5 1.4±0.2 6.7 0.70±0.3 3.0±0.2 9.0±0.2 1.9±0.2 Supportive Terminals ( ) Reference size K16 18.0 16.8 19.0 21.0 –0.1 to +0.15 6.7 1.4±0.2 6.7 0.70±0.3 3.0±0.2 11.0±0.2 1.9±0.2 Land/Pad pattern The circuit board land/pad pattern size for chip capacitors is specified in the following table. The land pitch influences installation strength and consider it. ● Standard products [Table of board land size vs. capacitor size] Size code (Dimensions) B (04) C (05) D (06.3) E (08 × 6.2L) F (08 × 10.2L) G (010 × 10.2L) H (012.5) J (016) K (018) b – b a Land space + c a 1.0 1.5 1.8 2.2 3.1 4.6 4.0 6.0 6.0 (Unit : mm) b 2.5 2.8 3.2 4.0 4.0 4.1 5.7 6.5 7.5 c 1.6 1.6 1.6 1.6 2.0 2.0 2.0 2.5 2.5 ✽ When size “a” is wide, back fillet can be made, decreasing fitting strength. ● Vibration-proof products [Table of board land size vs. capacitor size] Land space G Size code (Dimensions) E (08 × 6.5L) F (08 × 10.5L) G (010) H (012.5) J (016) K (018) G B A A B E D F – C H B C + A 1.8 2.7 3.9 3.9 5.8 5.8 B 4.2 4.0 4.4 6.0 6.8 7.3 C 5.0 4.7 4.7 6.9 6.2 6.2 D 1.3 1.3 1.3 2.8 3.6 3.6 E 1.5 1.0 1.2 1.3 1.3 1.8 (Unit : mm) F 1.4 1.7 1.9 1.9 1.9 1.9 G 1.5 1.1 1.1 2.2 1.7 1.7 H 2.0 2.5 2.5 2.5 2.8 2.8 ✽ When size “A” is wide, back fillet can be made, decreasing fitting strength. ✽ Take mounting conditions, solderability and fitting strength into consideration when selecting parts for your company’s design. Capacitor Ambient Temperature Expected life estimate quick reference guide 24 hours operation (°C) 120 110 2 3 100 90 1 85 °C 2000 h 2 105 °C 1000 h 3 105 °C 2000 h 4 105 °C 5000 h 5 125 °C 2000 h 5 4 1 80 70 60 50 40 Time (h) 2000 5000 10,000 20,000 (Year) 1 2 3 8 hours/d operation (Year) 3 6 10 50,000 100,000 4 5 7 15 20 10 30 200,000 (Time) 20 (Year) (Year) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Packaging specifications ● Reel ● Dimensions dimensions of outer carton box W±1 L±5 2.0±0.5 50 min. H±5 13.0±0.5 21.0±0.8 W±5 R:10 Unit : mm B to G : 380±2 G13 to K21 : 330±2 Size code B, C D, D8, E F, G G13, G17 H13, H16 J16, J21 K16, K21 3.0 Unit : mm Size code B, C D, E, D8 F, G Size code G13, G17 H13, H16 J16, J21 K16, K21 W 34 ● Min.packing 46 Size code Feeding hole 4.0±0.1 – – + + + Polarity+(except bi-polar type) P±0.1 mm mm mm mm Tape running direction 350 230 350 Min.packing quantity pcs. 330 mm reel 250 200 150 125 75 G13 G17, H13 H16 J16, K16 J21, K21 A±0.2 210 Min.packing quantity pcs. 380 mm reel 2000 2000 1000 1000 1000 900 500 Height Size code C – E D8 F, G 0.4 F±0.1 f1.5+0.1 0 B W±0.3 2.0±0.1 C, D D±0.2 W, L 395 395 395 quantity L=5.4 L=5.8 L=5.4 L=5.8 – – – B dimensions (size B to G) 1.75±0.1 ● Taping W 14 18 26 H 220 250 220 Ask factory for technical specifications. Size code W A B C D D8 E F G 12.0 12.0 16.0 16.0 16.0 24.0 24.0 4.7 5.7 7.0 7.0 8.7 8.7 10.7 ● Taping B 4.6 +0.2 –0.1 5.7 +0.3 –0.2 7.0 +0.3 –0.2 7.0 +0.3 –0.2 8.7 +0.3 –0.2 8.7 +0.3 –0.2 10.7 +0.3 –0.2 C P F 6.5±0.3 8.0±0.5 9.0±0.5 9.0±0.5 11.4±0.5 12.5±0.5 14.5±0.5 8.0 12.0 12.0 12.0 12.0 16.0 16.0 5.5 5.5 7.5 7.5 7.5 11.5 11.5 Size code – – + + + P±0.1 A±0.5 0.5 Tape running direction C±0.5 – D±0.2 B±0.5 4.0±0.1 1.75±0.1 2.0±0.1 1.5+0.1 0 F±0.1 S±0.1 0.75+0.1 0 W±0.3 L=5.4 mm 5.8 5.8 5.8 L=5.8 mm 6.2 6.4 6.4 8.4 6.8 11.0 11.0 dimensions (size G13 to K21) 0.2±0.05 Polarity D Height G13 G17 H13 H16 J16 J21 K16 K21 Taping size A 10.7 10.7 14.0 14.0 17.5 17.5 19.5 19.5 B 10.7 10.7 14.0 14.0 17.5 17.5 19.5 19.5 C 14.5 14.5 18.0 18.0 23.0 23.0 26.0 26.0 D 14.5 17.5 14.5 17.5 17.5 22.5 17.5 22.5 F 14.2 14.2 14.2 14.2 20.2 20.2 20.2 20.2 P 20.0 20.0 24.0 24.0 28.0 28.0 32.0 32.0 S 28.4 28.4 28.4 28.4 40.4 40.4 40.4 40.4 W 32.0 32.0 32.0 32.0 44.0 44.0 44.0 44.0 Ask factory for technical specifications. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : S Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 85 °C 2000 h product is available upon request. (08 mm and larger) ● RoHS compliant ● Vibration-proof Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +85 °C 6.3 V.DC to 50 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3 After applying rated working voltage for 2000 hours (Miniaturization product type 1000 hours) at +85 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meer the following limits. Within ±20 % of the initial value Size code Cap. change Capacitance change D8 (06.3×7.7) 2000 hours ±25 % 1000 hours ±30 % < D (06.3) Miniature < 200 % of the initial limit tan d DC leakege current Within the initial limit After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k to Correction factor 0.70 1.00 1.30 1.70 Capacitance (µF) 22 6S Lot number Series indentification (S) or (A) Mark for Lead-Free products (Black dot) Rated voltage (V.DC) (6=6.3 V.DC) A±0.2 (P) H 0D±0.5 Negative polarity marking (–) – + L W Pressure Relief (010 and larger) Size code 0D B 4.0 C 5.0 D 6.3 D8 6.3 E 8.0 F 8.0 G 10.0 L A, B (I) 0.3 max. Example : 6.3 V.DC 22 µF Marking color : BLACK K (I) Dimensions B±0.2 Marking ( ) Reference size (Unit : mm) H. 4.3 5.5 max 5.4 +0.1 -0.2 5.4 +0.1 5.3 6.5 max -0.2 5.4 +0.1 6.6 7.8 max -0.2 7.7±0.3 6.6 7.8 max 6.2±0.3 8.3 9.5 max 10.2±0.3 8.3 10.0 max 10.2±0.3 10.3 12.0 max I W P K 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 1.8 2.2 3.1 4.6 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.70±0.20 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 22 33 47 100 6.3 330 470 1000 1500 22 33 47 100 10 220 330 470 1000 10 22 33 47 16 100 220 330 470 4.7 10 22 33 25 47 100 220 330 470 ✽ 0D L Size code 4 4 5 5 6.3 6.3 8 8 10 10 4 4 5 5 5 6.3 6.3 8 8 8 10 10 4 4 5 5 5 6.3 6.3 8 6.3 8 8 10 8 10 4 4 5 5 6.3 5 6.3 6.3 8 6.3 8 8 10 8 10 10 5.4 5.4 5.4 5.4 5.4 7.7 6.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 7.7 6.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 7.7 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 7.7 10.2 10.2 10.2 10.2 10.2 10.2 B (B) C (C) D D8 E (F) G (G) (B) (B) C (C) (C) D D8 E F (F) G (G) B (B) C (C) (C) D (D) E D8 (F) (F) G (F) G B (B) C (C) D (C) D (D) (E) D8 F (F) G (F) G (G) Specification Ripple current tan d Endurance (120 Hz) (120 Hz) (hours) (+85 °C) (+20 °C) (mA r.m.s.) 29 0.30 2000 22 0.35 1000 46 0.30 2000 47 0.40 1000 71 0.30 2000 188 0.30 2000 300 0.35 2000 380 0.35 1000 700 0.35 2000 750 0.50 1000 28 0.30 1000 29 0.30 1000 43 0.22 2000 47 0.30 1000 50 0.30 1000 70 0.26 2000 173 0.22 2000 250 0.26 2000 390 0.26 2000 390 0.26 1000 400 0.26 2000 580 0.35 1000 28 0.16 2000 28 0.26 1000 39 0.16 2000 35 0.26 1000 39 0.26 1000 70 0.16 2000 70 0.26 1000 200 0.20 2000 162 0.20 2000 280 0.20 1000 320 0.20 1000 380 0.20 2000 350 0.26 1000 420 0.20 2000 22 0.14 2000 22 0.20 1000 28 0.14 2000 35 0.20 1000 55 0.14 2000 42 0.20 1000 65 0.14 2000 70 0.20 1000 91 0.16 1000 143 0.16 2000 180 0.16 2000 230 0.20 1000 310 0.16 2000 270 0.20 1000 340 0.16 2000 380 0.25 1000 Min. Packaging Q'ty Part No. EEE0JA220AR EEE0JA330WAR EEE0JA470AR EEE0JA101WAR EEE0JA101AP EEE0JA331XAP EEE0JA331AP EEE0JA471UAP EEE0JA102AP EEE0JA152UAP EEE1AA220WAR EEE1AA330WAR EEE1AA330AR EEE1AA470WAR EEE1AA101WAR EEE1AA101AP EEE1AA221XAP EEE1AA221AP EEE1AA331AP EEE1AA471UAP EEE1AA471AP EEE1AA102UAP EEE1CA100AR EEE1CA220WAR EEE1CA220AR EEE1CA330WAR EEE1CA470WAR EEE1CA470AP EEE1CA101WAP EEE1CA101AP EEE1CA221XAP EEE1CA221UAP EEE1CA331UAP EEE1CA331AP EEE1CA471UAP EEE1CA471AP EEE1EA4R7AR EEE1EA100WAR EEE1EA100AR EEE1EA220WAR EEE1EA220AP EEE1EA330WAR EEE1EA330AP EEE1EA470WAP EEE1EA101UAP EEE1EA101XAP EEE1EA101AP EEE1EA221UAP EEE1EA221AP EEE1EA331UAP EEE1EA331AP EEE1EA471UAP Reflow Taping (pcs) (5) (5) (5) (5) (5) (5) (7) (7) (7) (7) (5) (5) (5) (5) (5) (5) (5) (7) (7) (7) (7) (7) (5) (5) (5) (5) (5) (5) (5) (7) (5) (7) (7) (7) (7) (7) (5) (5) (5) (5) (5) (5) (5) (5) (7) (5) (7) (7) (7) (7) (7) (7) 2000 2000 1000 1000 1000 900 1000 500 500 500 2000 2000 1000 1000 1000 1000 900 1000 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 1000 900 500 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 1000 1000 900 500 500 500 500 500 500 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 4.7 10 22 33 35 47 100 220 330 1 2.2 3.3 4.7 10 22 50 33 47 100 220 ✽ 0D L Size code 4 4 5 5 6.3 6.3 8 6.3 8 6.3 8 10 8 10 10 4 4 4 4 5 5 6.3 6.3 8 8 6.3 8 6.3 8 10 8 10 10 5.4 5.4 5.4 5.4 5.4 5.4 6.2 5.4 6.2 7.7 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 6.2 7.7 10.2 7.7 10.2 10.2 10.2 10.2 10.2 B (B) C (C) D (D) E (D) E D8 (F) G (F) G (G) B B B (B) C (C) D (D) E (E) D8 F D8 (F) G (F) G (G) Specification Ripple current tan d Endurance (120 Hz) (120 Hz) (hours) (+85 °C) (+20 °C) (mA r.m.s.) 22 0.12 2000 22 0.16 1000 30 0.12 2000 36 0.16 1000 60 0.12 2000 60 0.16 1000 130 0.14 2000 70 0.16 1000 165 0.14 2000 132 0.14 2000 140 0.14 1000 210 0.14 2000 200 0.14 1000 310 0.14 2000 350 0.30 1000 10 0.12 2000 16 0.12 2000 16 0.12 2000 18 0.14 1000 23 0.12 2000 27 0.14 1000 35 0.12 2000 40 0.14 1000 120 0.12 2000 65 0.12 1000 65 0.14 2000 110 0.12 2000 105 0.14 2000 110 0.12 1000 130 0.12 2000 200 0.18 1000 250 0.12 2000 300 0.18 1000 Min. Packaging Q'ty Part No. EEE1VA4R7AR EEE1VA100WAR EEE1VA100AR EEE1VA220WAR EEE1VA220AP EEE1VA330WAP EEE1VA330AP EEE1VA470WAP EEE1VA470AP EEE1VA101XAP EEE1VA101UAP EEE1VA101AP EEE1VA221UAP EEE1VA221AP EEE1VA331UAP EEE1HA1R0AR EEE1HA2R2AR EEE1HA3R3AR EEE1HA4R7WAR EEE1HA4R7AR EEE1HA100WAR EEE1HA100AP EEE1HA220WAP EEE1HA220AP EEE1HA330UAP EEE1HA330XAP EEE1HA330AP EEE1HA470XAP EEE1HA470UAP EEE1HA470AP EEE1HA101UAP EEE1HA101AP EEE1HA221UAP Reflow Taping (pcs) (5) (5) (5) (5) (5) (5) (7) (5) (7) (5) (7) (7) (7) (7) (7) (5) (5) (5) (5) (5) (5) (5) (5) (7) (7) (5) (7) (5) (7) (7) (7) (7) (7) 2000 2000 1000 1000 1000 1000 1000 1000 1000 900 500 500 500 500 500 2000 2000 2000 2000 1000 1000 1000 1000 1000 1000 900 500 900 500 500 500 500 500 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : S Type : V Features ● Endurance : 85 °C 2000 h product is available upon request. (08 mm and larger) ● RoHS compliant ● Vibration-proof Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +85 °C 4 V.DC to 100 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) (Bi-Polar I < 0.02 CV or 6 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 4 6.3 10 16 25 35 50 63 100 Z(–25 °C)/Z(+20 °C) 7 4 3 2 2 2 2 3 3 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 15 8 6 4 4 3 3 4 4 After applying rated working voltage for 2000 hours (Bi-polar:1000 hours for each polarity) at +85 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Within ±20 % of the initial value Size code Rated voltage Cap. change Capacitance change B(04) to D, D8(06.3) 4 V.DC 1000 hours ±30 % 6.3 V.DC < D(06.3) Miniature 1000 hours ±20 % > 10 V.DC tan d < 200 % of the initial limit DC leakege current Within the initial limit After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k to Correction factor 0.70 1.00 1.30 1.70 0.3 max. L Pressure Relief (010 and larger) Capacitance (µF) 33 4S Series indentification (S) or (A) Mark for Lead-Free products (Black dot) Lot number Rated voltage (V.DC) (6=6.3 V.DC) Size code B C D D8 E F G 0D L A, B 0.1 4.3 4.0 5.4+- 0.2 0.1 5.0 5.4+- 0.2 5.3 0.1 6.3 5.4+- 0.2 6.6 6.3 7.7±0.3 6.6 8.0 6.2±0.3 8.3 8.0 10.2±0.3 8.3 10.0 10.2±0.3 10.3 A±0.2 (P) B±0.2 Negative polarity marking (–) (No marking for the bi-polar) – H 0D±0.5 Example : 4 V.DC 33 µF Marking color : BLACK K (I) Dimensions + (I) Marking W ( ) Reference size (Unit : mm) H I W 5.5 max. 6.5 max. 7.8 max. 7.8 max. 9.5 max. 10.0 max. 12.0 max. 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P K 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 + 0.15 1.8 0.35 - 0.20 1.8 0.35 +- 0.15 0.20 2.2 0.35 +- 0.15 0.20 3.1 0.70±0.20 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 4 33 47 100 220 330 470 22 33 47 100 6.3 220 330 470 1000 1500 22 33 47 100 10 220 330 470 1000 10 22 33 47 16 100 220 330 470 ✽ 0D L Size code 4 4 5 6.3 6.3 6.3 4 4 4 5 5 6.3 6.3 6.3 8 8 8 10 10 4 4 5 5 5 6.3 6.3 8 8 8 10 10 4 4 5 5 5 6.3 6.3 8 6.3 8 8 10 8 10 5.4 5.4 5.4 5.4 5.4 7.7 5.4 5.4 5.4 5.4 5.4 5.4 5.4 7.7 6.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 7.7 6.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 7.7 10.2 10.2 10.2 10.2 10.2 B B C D (D) D8 B (B) (B) C (C) D (D) D8 E F (F) G G (B) (B) C (C) (C) D D8 E F (F) G G B (B) C (C) (C) D (D) E D8 F (F) G (F) G Ripple tan d current Endurance (120 Hz) (120 Hz) (hours) (+85 °C) (+20 °C) (mA r.m.s.) 26 0.35 1000 34 0.35 1000 61 0.35 1000 82 0.35 1000 80 0.50 1000 200 0.35 1000 29 0.26 2000 22 0.35 1000 36 0.35 1000 46 0.26 2000 47 0.35 1000 71 0.26 2000 74 0.35 1000 188 0.26 2000 300 0.35 2000 380 0.35 2000 500 0.35 2000 700 0.35 2000 750 0.35 2000 28 0.30 1000 29 0.30 1000 43 0.20 2000 43 0.30 1000 50 0.30 1000 70 0.26 2000 173 0.20 2000 250 0.26 2000 390 0.26 2000 390 0.26 2000 400 0.26 2000 580 0.26 2000 28 0.16 2000 28 0.26 1000 39 0.16 2000 35 0.26 1000 39 0.26 1000 70 0.16 2000 70 0.26 1000 200 0.20 2000 162 0.16 2000 280 0.20 2000 320 0.20 2000 380 0.20 2000 350 0.20 2000 420 0.20 2000 Min. Packaging Q'ty Part No. EEE0GA330SR EEE0GA470SR EEE0GA101SR EEE0GA221SP EEE0GA331WP EEE0GA471XP EEE0JA220SR EEE0JA330WR EEE0JA470WR EEE0JA470SR EEE0JA101WR EEE0JA101SP EEE0JA221WP EEE0JA331XP EEE0JA331P EEE0JA471P EEE0JA102UP EEE0JA102P EEE0JA152P EEE1AA220WR EEE1AA330WR EEE1AA330SR EEE1AA470WR EEE1AA101WR EEE1AA101SP EEE1AA221XP EEE1AA221P EEE1AA331P EEE1AA471UP EEE1AA471P EEE1AA102P EEE1CA100SR EEE1CA220WR EEE1CA220SR EEE1CA330WR EEE1CA470WR EEE1CA470SP EEE1CA101WP EEE1CA101P EEE1CA221XP EEE1CA221P EEE1CA331UP EEE1CA331P EEE1CA471UP EEE1CA471P Reflow Taping (pcs) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (1) (2) (1) (2) (2) (2) (2) (2) 2000 2000 1000 1000 1000 900 2000 2000 2000 1000 1000 1000 1000 900 1000 500 500 500 500 2000 2000 1000 1000 1000 1000 900 1000 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 1000 900 500 500 500 500 500 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 4.7 10 22 33 25 47 100 220 330 470 4.7 10 22 33 35 47 100 220 330 ✽ 0D L Size code 4 4 5 5 6.3 5 6.3 6.3 6.3 8 8 8 10 8 10 10 4 4 5 5 6.3 6.3 8 6.3 8 6.3 8 10 8 10 10 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 7.7 6.2 10.2 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 6.2 5.4 6.2 7.7 10.2 10.2 10.2 10.2 10.2 B (B) C (C) D (C) D (D) D8 (E) F (F) G (F) G G B (B) C (C) D (D) E (D) E D8 (F) G (F) G G Ripple tan d current Endurance (120 Hz) (120 Hz) (hours) (+85 °C) (+20 °C) (mA r.m.s.) 22 0.14 2000 22 0.20 1000 28 0.14 2000 35 0.20 1000 55 0.14 2000 42 0.20 1000 65 0.14 2000 70 0.20 1000 143 0.14 2000 91 0.16 2000 180 0.16 2000 230 0.16 2000 310 0.16 2000 270 0.16 2000 340 0.16 2000 380 0.16 2000 22 0.12 2000 22 0.16 1000 30 0.12 2000 36 0.16 1000 60 0.12 2000 60 0.16 1000 130 0.14 2000 70 0.16 1000 165 0.14 2000 132 0.12 2000 140 0.14 2000 210 0.14 2000 200 0.14 2000 310 0.14 2000 350 0.14 2000 Min. Packaging Q'ty Part No. EEE1EA4R7SR EEE1EA100WR EEE1EA100SR EEE1EA220WR EEE1EA220SP EEE1EA330WR EEE1EA330SP EEE1EA470WP EEE1EA101XP EEE1EA101UP EEE1EA101P EEE1EA221UP EEE1EA221P EEE1EA331UP EEE1EA331P EEE1EA471P EEE1VA4R7SR EEE1VA100WR EEE1VA100SR EEE1VA220WR EEE1VA220SP EEE1VA330WP EEE1VA330P EEE1VA470WP EEE1VA470P EEE1VA101XP EEE1VA101UP EEE1VA101P EEE1VA221UP EEE1VA221P EEE1VA331P Reflow Taping (pcs) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (2) (1) (2) (1) (2) (2) (2) (2) (2) 2000 2000 1000 1000 1000 1000 1000 1000 900 1000 500 500 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 1000 1000 900 500 500 500 500 500 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 1 2.2 3.3 4.7 10 22 50 33 47 100 220 22 63 33 47 100 4.7 10 100 22 33 ✽ 0D L Size code 4 4 4 4 5 5 6.3 6.3 8 6.3 8 8 6.3 8 10 8 10 10 8 8 8 8 10 10 8 8 8 8 10 10 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 7.7 6.2 10.2 7.7 10.2 10.2 10.2 10.2 10.2 6.2 10.2 10.2 10.2 10.2 10.2 6.2 6.2 10.2 10.2 10.2 10.2 B B B (B) C (C) D (D) E D8 (E) F D8 (F) G (F) G G (E) F F (F) G G (E) (E) F (F) G G Ripple tan d current Endurance (120 Hz) (120 Hz) (hours) (+85 °C) (+20 °C) (mA r.m.s.) 10 0.12 2000 16 0.12 2000 16 0.12 2000 18 0.14 1000 23 0.12 2000 27 0.14 1000 35 0.12 2000 40 0.14 1000 120 0.12 2000 85 0.12 2000 65 0.12 2000 110 0.12 2000 105 0.12 2000 110 0.12 2000 130 0.12 2000 200 0.12 2000 250 0.12 2000 300 0.12 2000 40 0.18 2000 40 0.18 2000 45 0.18 2000 45 0.18 2000 45 0.18 2000 60 0.18 2000 50 0.18 2000 50 0.18 2000 85 0.18 2000 55 0.18 2000 85 0.18 2000 90 0.18 2000 Min. Packaging Q'ty Part No. EEE1HA010SR EEE1HA2R2SR EEE1HA3R3SR EEE1HA4R7WR EEE1HA4R7SR EEE1HA100WR EEE1HA100SP EEE1HA220WP EEE1HA220P EEE1HA330XP EEE1HA330UP EEE1HA330P EEE1HA470XP EEE1HA470UP EEE1HA470P EEE1HA101UP EEE1HA101P EEE1HA221P EEE1JA220UP EEE1JA220P EEE1JA330P EEE1JA470UP EEE1JA470P EEE1JA101P EEE2AA4R7UP EEE2AA100UP EEE2AA100P EEE2AA220UP EEE2AA220P EEE2AA330P Reflow Taping (pcs) (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (2) (2) (1) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) 2000 2000 2000 2000 1000 1000 1000 1000 1000 900 1000 500 900 500 500 500 500 500 1000 500 500 500 500 500 1000 1000 500 500 500 500 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list (Bi-polar) Endurance : 85 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 10 16 25 35 50 22 47 10 33 4.7 10 22 3.3 4.7 10 2.2 4.7 10 1 2.2 3.3 4.7 Min. Packaging Q'ty Specification 0D L Size code 5 6.3 4 6.3 4 5 6.3 4 5 6.3 4 5 6.3 4 5 5 6.3 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 C D B D B C D B C D B C D B C C D Ripple current tan d Endurance (120 Hz) (120 Hz) (hours) (+85 °C) (+20 °C) (mA r.m.s.) 29 0.52 2000 46 0.52 2000 25 0.40 2000 43 0.40 2000 20 0.32 2000 25 0.32 2000 39 0.32 2000 12 0.28 2000 21 0.28 2000 28 0.28 2000 12 0.24 2000 22 0.24 2000 30 0.24 2000 10 0.24 2000 16 0.24 2000 21 0.24 2000 31 0.24 2000 Part No. EEE0JA220NR EEE0JA470NP EEE1AA100NR EEE1AA330NP EEE1CA4R7NR EEE1CA100NR EEE1CA220NP EEE1EA3R3NR EEE1EA4R7NR EEE1EA100NP EEE1VA2R2NR EEE1VA4R7NR EEE1VA100NP EEE1HA010NR EEE1HA2R2NR EEENZ1H3R3R EEE1HA4R7NP Reflow Taping (pcs) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) 1000 1000 2000 1000 2000 1000 1000 2000 1000 1000 2000 1000 1000 2000 1000 1000 1000 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Hight-temperature Surface Mount Type assuranceize HA Series : HA Type : V ↑ High temperature S Lead-Free reflow (suffix : A✽) Features ● Endurance : 105 °C 1000 ● Vibration-proof product is ● RoHS compliant h available upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) –40 °C to +105 °C 6.3 V.DC to 50 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3 After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k to Correction factor 0.70 1.00 1.30 1.70 Capacitance (µF) 22 j HA L Series identification Mark for Lead-Free products (Black dot) (P) + Lot number 10 16 25 35 50 A C E V H Size L A, B H code 0D B 4.0 5.4 +- 0.1 4.3 5.5 max. 0.2 C 5.0 5.4 +- 0.1 5.3 6.5 max. 0.2 D 6.3 5.4 +- 0.1 6.6 7.8 max. 0.2 D8 6.3 7.7±0.3 6.6 7.8 max. E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. (I) A±0.2 W Pressure Relief (010 and larger) Rated voltage code R. Voltage 6.3 (V.DC) Code j H 0D±0.5 Negative polarity marking (–) – (I) 0.3 max. Example : 6.3 V.DC 22 µF Marking color : BLACK K Dimensions B±0.2 Marking ( ) Reference size (Unit : mm) I W 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P K 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 2.2 0.35 +- 0.15 0.20 3.1 0.70±0.20 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 1000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 22 33 47 100 6.3 330 470 1000 1500 22 33 47 10 100 220 470 1000 10 22 33 47 100 16 220 330 470 680 ✽ 0D L Size code 4 4 5 5 6.3 6.3 8 8 8 10 10 4 4 5 5 6.3 8 6.3 8 8 10 10 4 4 5 5 5 6.3 6.3 6.3 8 10 8 10 8 10 10 5.4 5.4 5.4 5.4 5.4 7.7 6.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 6.2 7.7 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 7.7 10.2 10.2 10.2 10.2 10.2 10.2 10.2 B (B) C (C) D D8 (E) F (F) G (G) (B) (B) C (C) (D) E D8 F (F) G (G) B (B) C (C) (C) D (D) D8 (F) G (F) G (F) G (G) Specification Ripple current tan d (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 29 0.30 29 0.35 46 0.30 47 0.40 71 0.30 105 0.30 18 0 0.35 230 0.35 300 0.35 400 0.35 480 0.50 28 0.30 29 0.30 43 0.22 43 0.30 71 0.30 110 0.26 105 0.22 160 0.26 200 0.26 270 0.26 400 0.35 28 0.16 28 0.26 39 0.16 35 0.26 39 0.26 70 0.16 70 0.26 105 0.20 150 0.20 210 0.20 170 0.20 230 0.20 340 0.26 340 0.20 380 0.26 Min. Packaging Q'ty Part No. EEEHA0J220AR EEEHAJ330WAR EEEHA0J470AR EEEHAJ101WAR EEEHA0J101AP EEEHAJ331XAP EEEHAJ331UAP EEEHA0J331AP EEEHAJ471UAP EEEHA0J102AP EEEHAJ152UAP EEEHAA220WAR EEEHAA330WAR EEEHA1A330AR EEEHAA470WAR EEEHAA101WAP EEEHA1A101AP EEEHAA221XAP EEEHA1A221AP EEEHAA471UAP EEEHA1A471AP EEEHAA102UAP EEEHA1C100AR EEEHAC220WAR EEEHA1C220AR EEEHAC330WAR EEEHAC470WAR EEEHA1C470AP EEEHAC101WAP EEEHAC221XAP EEEHAC221UAP EEEHA1C221AP EEEHAC331UAP EEEHA1C331AP EEEHAC471UAP EEEHA1C471AP EEEHAC681UAP Reflow Taping (pcs) (5) (5) (5) (5) (5) (5) (7) (7) (7) (7) (7) (5) (5) (5) (5) (5) (7) (5) (7) (7) (7) (7) (5) (5) (5) (5) (5) (5) (5) (5) (7) (7) (7) (7) (7) (7) (7) 2000 2000 1000 1000 1000 900 500 500 500 500 500 2000 2000 1000 1000 1000 1000 900 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 900 500 500 500 500 500 500 500 ✽ Size code( ) : Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V, 1H → H · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 1000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 4.7 10 22 33 25 47 100 220 330 470 4.7 10 22 33 35 47 100 220 330 1 2.2 3.3 4.7 10 22 50 33 47 100 220 ✽ 0D L Size code 4 4 5 5 6.3 5 6.3 6.3 8 8 6.3 8 8 10 8 10 10 4 4 5 5 6.3 6.3 8 8 8 6.3 8 10 8 10 10 4 4 4 5 6.3 8 6.3 8 8 6.3 8 10 8 10 10 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 6.2 7.7 10.2 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 6.2 6.2 10.2 7.7 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 6.2 7.7 6.2 10.2 7.7 10.2 10.2 10.2 10.2 10.2 B (B) C (C) D (C) D (D) E (E) D8 F (F) G (F) G (G) B (B) C (C) D (D) E (E) F D8 (F) G (F) G (G) B B B C D E D8 (E) F D8 (F) G (F) G (G) Specification Ripple tan d current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 22 0.14 22 0.20 28 0.14 35 0.20 55 0.14 45 0.20 65 0.14 70 0.20 91 0.16 91 0.16 91 0.16 130 0.16 160 0.20 190 0.16 180 0.20 340 0.16 360 0.25 22 0.12 22 0.16 30 0.12 35 0.16 60 0.12 42 0.16 84 0.14 84 0.14 98 0.14 84 0.14 120 0.14 160 0.14 170 0.14 210 0.14 250 0.30 10 0.12 16 0.12 16 0.12 23 0.12 35 0.12 70 0.12 70 0.14 70 0.12 91 0.12 63 0.14 95 0.12 100 0.12 110 0.18 120 0.12 150 0.18 Min. Packaging Q'ty Part No. EEEHA1E4R7AR EEEHAE100WAR EEEHA1E100AR EEEHAE220WAR EEEHA1E220AP EEEHAE330WAR EEEHA1E330AP EEEHAE470WAP EEEHA1E470AP EEEHAE101UAP EEEHAE101XAP EEEHA1E101AP EEEHAE221UAP EEEHA1E221AP EEEHAE331UAP EEEHA1E331AP EEEHAE471UAP EEEHA1V4R7AR EEEHAV100WAR EEEHA1V100AR EEEHAV220WAR EEEHA1V220AP EEEHAV330WAP EEEHA1V330AP EEEHAV470UAP EEEHA1V470AP EEEHAV101XAP EEEHAV101UAP EEEHA1V101AP EEEHAV221UAP EEEHA1V221AP EEEHAV331UAP EEEHA1H1R0AR EEEHA1H2R2AR EEEHA1H3R3AR EEEHA1H4R7AR EEEHA1H100AP EEEHA1H220AP EEEHAH330XAP EEEHAH330UAP EEEHA1H330AP EEEHAH470XAP EEEHAH470UAP EEEHA1H470AP EEEHAH101UAP EEEHA1H101AP EEEHAH221UAP Reflow (5) (5) (5) (5) (5) (5) (5) (5) (7) (7) (5) (7) (7) (7) (7) (7) (7) (5) (5) (5) (5) (5) (5) (7) (7) (7) (5) (7) (7) (7) (7) (7) (5) (5) (5) (5) (5) (7) (5) (7) (7) (5) (7) (7) (7) (7) (7) Taping (pcs) 2000 2000 1000 1000 1000 1000 1000 1000 1000 1000 900 500 500 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 1000 500 900 500 500 500 500 500 2000 2000 2000 1000 1000 1000 900 1000 500 900 500 500 500 500 500 ✽ Size code( ) : Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V, 1H → H · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Hight-temperature assuranceize Surface Mount Type Series : HA Type : V HA ↑ S Features ● Endurance : 105 °C 1000 ● Vibration-proof product is ● RoHS compliant h available upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 100 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 63 100 (Impedance ratio at 120 Hz) Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 3 3 Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3 4 4 After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value (6.3 V.DC of miniature : ±30 %) < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k to Correction factor 0.70 1.00 1.30 1.70 Capacitance (µF) 22 j HA Mark for Lead-Free products (Black dot) 25 35 50 C E V H W (I) ( ) Reference size (Unit : mm) Rated voltage code 16 + Pressure Relief (010 and larger) Series identification Lot number R. Voltage 6.3 10 (V.DC) Code j A L A±0.2 (P) Negative polarity marking (–) – H 0D±0.5 0.3 max. (I) Example : 6.3 V.DC 22 µF Marking color : BLACK K Dimensions B±0.2 Marking 63 100 J 2A Size L A, B H code 0D 4.3 5.5 max. B 4.0 5.4 +- 0.1 0.2 C 5.0 5.4 +- 0.1 5.3 6.5 max. 0.2 D 6.3 5.4 +- 0.1 6.6 7.8 max. 0.2 D8 6.3 7.7±0.3 6.6 7.8 max. E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P K 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 2.2 0.35 +- 0.15 0.20 3.1 0.70±0.20 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 1000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 22 33 47 100 6.3 220 330 470 1000 1500 22 33 47 10 100 220 470 1000 10 22 33 47 100 16 220 330 470 680 ✽ 0D L Size code 4 4 4 5 5 6.3 6.3 6.3 8 8 8 10 10 4 4 5 5 6.3 8 6.3 8 8 10 10 4 4 5 5 5 6.3 6.3 6.3 8 10 8 10 8 10 10 5.4 5.4 5.4 5.4 5.4 5.4 5.4 7.7 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 6.2 7.7 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 7.7 10.2 10.2 10.2 10.2 10.2 10.2 10.2 B (B) (B) C (C) D (D) D8 F (F) (F) G G (B) (B) C (C) (D) E D8 F (F) G G B (B) C (C) (C) D (D) D8 (F) G (F) G (F) G G Specification Ripple tan d current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 29 0.30 29 0.35 36 0.35 46 0.30 47 0.35 71 0.30 74 0.35 105 0.30 230 0.35 300 0.35 300 0.35 400 0.35 480 0.35 28 0.30 29 0.30 43 0.22 43 0.30 71 0.30 110 0.26 105 0.22 160 0.26 200 0.26 270 0.26 400 0.26 28 0.16 28 0.26 39 0.16 35 0.26 39 0.26 70 0.16 70 0.26 105 0.16 150 0.20 210 0.20 170 0.20 230 0.20 340 0.20 340 0.20 380 0.20 Min. Packaging Q'ty Part No. EEEHA0J220R EEEHA0J330WR EEEHA0J470WR EEEHA0J470R EEEHA0J101WR EEEHA0J101P EEEHA0J221WP EEEHA0J331XP EEEHA0J331P EEEHA0J471UP EEEHA0J102UP EEEHA0J102P EEEHA0J152P EEEHA1A220WR EEEHA1A330WR EEEHA1A330R EEEHA1A470WR EEEHA1A101WP EEEHA1A101P EEEHA1A221XP EEEHA1A221P EEEHA1A471UP EEEHA1A471P EEEHA1A102P EEEHA1C100R EEEHA1C220WR EEEHA1C220R EEEHA1C330WR EEEHA1C470WR EEEHA1C470P EEEHA1C101WP EEEHA1C221XP EEEHA1C221UP EEEHA1C221P EEEHA1C331UP EEEHA1C331P EEEHA1C471UP EEEHA1C471P EEEHA1C681P Reflow Taping (pcs) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (2) (1) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (2) (2) 2000 2000 2000 1000 1000 1000 1000 900 500 500 500 500 500 2000 2000 1000 1000 1000 1000 900 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 900 500 500 500 500 500 500 500 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 1000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 4.7 10 22 33 25 47 100 220 330 470 4.7 10 22 33 35 47 100 220 330 1 2.2 3.3 4.7 10 22 50 33 47 100 220 ✽ 0D L Size code 4 4 5 5 6.3 5 6.3 6.3 8 6.3 8 8 8 10 8 10 10 4 4 5 5 6.3 6.3 8 8 8 6.3 8 10 8 10 10 4 4 4 5 6.3 8 6.3 8 8 6.3 8 10 8 10 10 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 7.7 6.2 10.2 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 6.2 6.2 10.2 7.7 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 6.2 7.7 6.2 10.2 7.7 10.2 10.2 10.2 10.2 10.2 B (B) C (C) D (C) D (D) E D8 (E) F (F) G (F) G G B (B) C (C) D (D) E (E) F D8 (F) G (F) G G B B B C D E D8 (E) F D8 (F) G (F) G G Specification Ripple tan d current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 22 0.14 22 0.20 28 0.14 35 0.20 55 0.14 45 0.20 65 0.14 70 0.20 91 0.16 91 0.14 91 0.16 130 0.16 160 0.16 190 0.16 180 0.16 340 0.16 360 0.16 22 0.12 22 0.16 30 0.12 35 0.16 60 0.12 42 0.16 84 0.14 84 0.14 98 0.14 84 0.12 120 0.14 160 0.14 170 0.14 210 0.14 250 0.14 10 0.12 16 0.12 16 0.12 23 0.12 35 0.12 70 0.12 70 0.12 70 0.12 91 0.12 63 0.12 95 0.12 100 0.12 110 0.12 120 0.12 150 0.12 Min. Packaging Q'ty Part No. EEEHA1E4R7R EEEHA1E100WR EEEHA1E100R EEEHA1E220WR EEEHA1E220P EEEHA1E330WR EEEHA1E330P EEEHA1E470WP EEEHA1E470P EEEHA1E101XP EEEHA1E101UP EEEHA1E101P EEEHA1E221UP EEEHA1E221P EEEHA1E331UP EEEHA1E331P EEEHA1E471P EEEHA1V4R7R EEEHA1V100WR EEEHA1V100R EEEHA1V220WR EEEHA1V220P EEEHA1V330WP EEEHA1V330P EEEHA1V470UP EEEHA1V470P EEEHA1V101XP EEEHA1V101UP EEEHA1V101P EEEHA1V221UP EEEHA1V221P EEEHA1V331P EEEHA1H1R0R EEEHA1H2R2R EEEHA1H3R3R EEEHA1H4R7R EEEHA1H100P EEEHA1H220P EEEHA1H330XP EEEHA1H330UP EEEHA1H330P EEEHA1H470XP EEEHA1H470UP EEEHA1H470P EEEHA1H101UP EEEHA1H101P EEEHA1H221P Reflow Taping (pcs) (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (2) (2) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (2) (2) (2) (1) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (2) (1) (2) (2) (1) (2) (2) (2) (2) (2) 2000 2000 1000 1000 1000 1000 1000 1000 1000 900 1000 500 500 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 1000 500 900 500 500 500 500 500 2000 2000 2000 1000 1000 1000 900 1000 500 900 500 500 500 500 500 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 1000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 10 22 63 33 47 4.7 10 100 22 33 47 ✽ 0D L Size code 8 8 8 10 8 10 8 8 8 10 10 10 6.2 6.2 10.2 10.2 10.2 10.2 6.2 10.2 10.2 10.2 10.2 10.2 E (E) F G (F) G (E) F (F) G G (G) Specification Ripple tan d current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 25 0.18 25 0.18 30 0.18 45 0.18 45 0.18 50 0.18 30 0.18 55 0.18 55 0.18 60 0.18 65 0.18 65 0.18 Min. Packaging Q'ty Part No. EEEHA1J100P EEEHA1J220UP EEEHA1J220P EEEHA1J330P EEEHA1J470UP EEEHA1J470P EEEHA2A4R7UP EEEHA2A100P EEEHA2A220UP EEEHA2A220P EEEHA2A330P EEEHA2A470UP Reflow Taping (pcs) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) 1000 1000 500 500 500 500 1000 500 500 500 500 500 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : HB Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 105 °C 2000 h ● Vibration-proof product is available ● RoHS compliant upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 50 V.DC 1 µF to 1500 µF ±20 % (120 Hz/ +20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 Standard Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3 (Impedance ratio at 120 Hz) Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 Miniaturization product Z(–40 °C)/Z(+20 °C) 10 8 6 6 4 4 After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Within ±20 % of the initial value (16 V.DC or less : Capacitance change Within ±25 %, Miniaturization product : Within ±35 %) tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k to Correction factor 0.70 1.00 1.30 1.70 22 j HB L Series identification Mark for Lead-Free products (Black dot) Rated voltage code (P) W ( )reference size (Unit : mm) Lot number R. Voltage 6.3 (V.DC) Code j + Pressure Relief (010 and larger) (I) Capacitance (µF) H 0D±0.5 Negative polarity marking (–) A±0.2 – K 0.3 max. Example : 6.3 V.DC 22 µF Marking color : BLACK (I) Dimensions B±0.2 Marking 10 16 25 35 50 A C E V H Size L A, B H code 0D B 4.0 5.8±0.3 4.3 5.5 max. C 5.0 5.8±0.3 5.3 6.5 max. D 6.3 5.8±0.3 6.6 7.8 max. D8 6.3 7.7±0.3 6.6 7.8 max. E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P K 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 2.2 0.35 +- 0.15 0.20 3.1 0.70±0.20 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 22 33 47 100 6.3 220 330 470 1500 33 68 100 10 150 220 470 10 22 33 47 16 100 220 330 470 4.7 6.8 10 22 33 25 47 100 220 330 470 ✽ 0D L Size code 4 4 4 5 5 6.3 6.3 8 8 8 8 10 4 5 6.3 6.3 8 6.3 8 8 8 10 4 4 5 6.3 5 6.3 6.3 6.3 8 8 10 10 8 10 4 4 4 5 6.3 5 6.3 6.3 8 8 8 8 10 8 10 10 5.8 5.8 5.8 5.8 5.8 5.8 5.8 10.2 6.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 6.2 5.8 6.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 7.7 5.8 10.2 10.2 10.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 6.2 6.2 10.2 10.2 10.2 10.2 10.2 10.2 B B (B) C (C) D (D) F (E) F (F) (G) (B) C D (D) E (D) (E) F (F) G B (B) C D (C) D D8 (D) F (F) G G (F) G B B (B) C D (C) D (D) E (E) F (F) G (F) G (G) Specification Ripple tan d current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 26 0.30 29 0.30 26 0.50 46 0.30 42 0.50 71 0.30 80 0.50 150 0.35 180 0.50 230 0.35 230 0.50 290 0.50 23 0.30 43 0.26 70 0.22 71 0.30 110 0.26 64 0.50 110 0.30 160 0.26 220 0.35 270 0.26 28 0.16 29.5 0.26 39 0.16 65 0.16 39 0.26 70 0.16 84 0.16 70 0.26 120 0.20 150 0.20 210 0.20 230 0.20 240 0.40 340 0.20 22 0.14 25 0.14 28 0.16 28 0.14 55 0.14 50 0.20 65 0.14 65 0.20 91 0.16 100 0.16 130 0.16 130 0.30 190 0.16 130 0.30 220 0.16 230 0.30 Min. Packaging Q'ty Part No. Reflow Taping (pcs) (5) (5) (5) (5) (5) (5) (5) (7) (7) (7) (7) (7) (5) (5) (5) (5) (7) (5) (7) (7) (7) (7) (5) (5) (5) (5) (5) (5) (5) (5) (7) (7) (7) (7) (7) (7) (5) (5) (5) (5) (5) (5) (5) (5) (7) (7) (7) (7) (7) (7) (7) (7) 2000 2000 2000 1000 1000 1000 1000 500 1000 500 500 500 2000 1000 1000 1000 1000 1000 1000 500 500 500 2000 2000 1000 1000 1000 1000 900 1000 500 500 500 500 500 500 2000 2000 2000 1000 1000 1000 1000 1000 1000 1000 500 500 500 500 500 500 EEEHB0J220AR EEEHB0J330AR EEEHBJ470UAR EEEHB0J470AR EEEHBJ101UAR EEEHB0J101AP EEEHBJ221UAP EEEHB0J221AP EEEHBJ331UAP EEEHB0J331AP EEEHBJ471UAP EEEHBJ152UAP EEEHBA330UAR EEEHB1A330AR EEEHB1A680AP EEEHBA101UAP EEEHB1A101AP EEEHBA151UAP EEEHBA221UAP EEEHB1A221AP EEEHBA471UAP EEEHB1A471AP EEEHB1C100AR EEEHBC220UAR EEEHB1C220AR EEEHB1C330AP EEEHBC470UAR EEEHB1C470AP EEEHBC470XAP EEEHBC101UAP EEEHB1C101AP EEEHBC221UAP EEEHB1C221AP EEEHB1C331AP EEEHBC471UAP EEEHB1C471AP EEEHB1E4R7AR EEEHB1E6R8AR EEEHBE100UAR EEEHB1E100AR EEEHB1E220AP EEEHBE330UAR EEEHB1E330AP EEEHBE470UAP EEEHB1E470AP EEEHBE101UAP EEEHB1E101AP EEEHBE221UAP EEEHB1E221AP EEEHBE331UAP EEEHB1E331AP EEEHBE471UAP ✽ Size code( ) : Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 4.7 6.8 10 22 33 35 47 100 220 1 2.2 3.3 4.7 6.8 10 50 22 33 47 100 220 ✽ 0D L Size code 4 4 5 6.3 8 6.3 8 8 8 10 10 4 4 4 5 5 6.3 6.3 8 8 6.3 8 10 10 10 5.8 5.8 5.8 5.8 6.2 7.7 6.2 10.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 5.8 6.2 10.2 7.7 10.2 10.2 10.2 10.2 B (B) C D E D8 (E) F (F) G (G) B B B C C D (D) E F D8 (F) G (G) (G) Specification Ripple tan d current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 21 0.12 25 0.12 28 0.12 55 0.12 84 0.14 98 0.20 91 0.18 98 0.14 98 0.20 160 0.14 180 0.14 10 0.12 16 0.12 16 0.12 23 0.12 23 0.12 35 0.12 35 0.14 70 0.12 91 0.12 63 0.12 95 0.12 100 0.12 250 0.12 270 0.18 Min. Packaging Q'ty Part No. Reflow Taping (pcs) (5) (5) (5) (5) (7) (5) (7) (7) (7) (7) (7) (5) (5) (5) (5) (5) (5) (5) (7) (7) (5) (7) (7) (7) (7) 2000 2000 1000 1000 1000 900 1000 500 500 500 500 2000 2000 2000 1000 1000 1000 1000 1000 500 900 500 500 500 500 EEEHB1V4R7AR EEEHBV6R8UAR EEEHB1V100AR EEEHB1V220AP EEEHB1V330AP EEEHBV470YAP EEEHBV470UAP EEEHB1V470AP EEEHBV101UAP EEEHB1V101AP EEEHBV221UAP EEEHB1H1R0AR EEEHB1H2R2AR EEEHB1H3R3AR EEEHB1H4R7AR EEEHB1H6R8AR EEEHB1H100AP EEEHBH220UAP EEEHB1H220AP EEEHB1H330AP EEEHBH470YAP EEEHBH470UAP EEEHB1H470AP EEEHBH101UAP EEEHBH221UAP ✽ Size code( ) : Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Long life Surface Mount Type Series : HB Type : V 5.5 mm max. HB ↑ Low profile HA Features ● Endurance: 105 °C 2000 h ● 5.8 mm height (< 06.3), 5.5 mm height max. ● Vibration-proof product is available upon request. ● RoHS compliant (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance –40 °C to +105 °C 4 V.DC to 50 V.DC 1 µF to 470 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Leakage current (Bi-polar I < 0.02 CV or 6 (µA) after 2 minutes) Dissipation factor (tan d) Please see the attached characteristics list V.DC 4 6.3 10 16 25 35 50 Characteristics Z(–25 °C)/Z(+20 °C) 7 4 3 2 2 2 2 (Impedance ratio at 120 Hz) at low temperature Z(–40 °C)/Z(+20 °C) 15 8 6 4 4 3 3 After applying rated working voltage for 2000 hours (Bi-polar : 1000 hours for each polarity) at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value (4 V.DC : ±35 % 6.3 V.DC : ±25 % 04 to 06.3), 5.5 mm max. : ±25 % Endurance tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, Shelf life capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20°C, capacitors shall meet the following limits. Resistance to Capacitance change Within ±10 % of the initial value tan d Within the initial limit soldering heat DC leakage current Within the initial limit AEC-Q200 AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 0.70 10 k to 1.70 0.3 max. Mark for Lead-Free products (Black dot) Rated Voltage code 4 6.3 10 16 25 35 50 g j A C E V H (P) (I) W Pressure Relief (010 and larger) Series identification (HP : Bi-polar) (BS : 5.5 mm max.) Lot number + L Capacitance (µF) A±0.2 B±0.2 H 0D±0.5 Negative polarity marking (–) (No marking for the bi-polar) 47 g HB – (I) Dimensions Example : 4 V.DC 47 µF Marking color : BLACK R. Voltage (V.DC) Code 1k 1.30 K Marking 120 1.00 ( ) Reference size (Unit : mm) Size L A, B code 0D B 4.0 5.8±0.3 4.3 C 5.0 5.8±0.3 5.3 D 6.3 5.8±0.3 6.6 E 8.0 6.2±0.3 8.3 F 8.0 10.2±0.3 8.3 G 10.0 10.2±0.3 10.3 H I W P K 5.5 max. 6.5 max. 7.8 max. 9.5 max. 10.0 max. 12.0 max. 1.8 2.2 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 2.2 3.1 4.6 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.70±0.20 0.70±0.20 ● 5.5 Size code B C D P K mm height max. 0D L A, B H I W 4.0 5.0 6.3 5.4+- 0.1 0.2 5.4+- 0.1 0.2 5.4+- 0.1 0.2 4.3 5.3 6.6 5.5 max. 6.5 max. 7.8 max. 1.8 2.2 2.6 0.65±0.1 0.65±0.1 0.65±0.1 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 4 6.3 10 16 50 Size code 47 4 5.8 B 5 5.8 C 61 Min. Packaging Q'ty Part No. Reflow Taping (pcs) EEEHB0G470R (1) 2000 0.50 EEEHB0G101R (1) 1000 150 6.3 5.8 D 82 0.50 EEEHB0G151P (1) 1000 220 6.3 5.8 D 82 0.50 EEEHB0G221P (1) 1000 22 4 5.8 B 26 0.30 EEEHB0J220R (1) 2000 33 4 5.8 B 29 0.30 EEEHB0J330R (1) 2000 5 5.8 C 46 0.30 EEEHB0J470R (1) 1000 100 47 6.3 5.8 D 71 0.30 EEEHB0J101P (1) 1000 220 8 10.2 F 150 0.35 EEEHB0J221P (2) 500 330 8 10.2 F 230 0.35 EEEHB0J331P (2) 500 33 5 5.8 C 43 0.22 EEEHB1A330R (1) 1000 100 8 6.2 E 110 0.26 EEEHB1A101P (2) 1000 220 8 10.2 F 160 0.26 EEEHB1A221P (2) 500 470 10 10.2 G 270 0.26 EEEHB1A471P (2) 500 10 4 5.8 B 28 0.16 EEEHB1C100R (1) 2000 22 5 5.8 C 39 0.16 EEEHB1C220R (1) 1000 47 6.3 5.8 D 70 0.16 EEEHB1C470P (1) 1000 100 8 10.2 F 120 0.20 EEEHB1C101P (2) 500 220 10 10.2 G 210 0.20 EEEHB1C221P (2) 500 330 10 10.2 G 230 0.20 EEEHB1C331P (2) 500 4 5.8 B 22 0.14 EEEHB1E4R7R (1) 2000 6.8 35 L 100 4.7 25 0D Specification Ripple current tan d (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 34 0.50 4 5.8 B 25 0.14 EEEHB1E6R8R (1) 2000 33 6.3 5.8 D 65 0.14 EEEHB1E330P (1) 1000 47 8 6.2 E 91 0.16 EEEHB1E470P (2) 1000 100 8 10.2 F 130 0.16 EEEHB1E101P (2) 500 220 10 10.2 G 190 0.16 EEEHB1E221P (2) 500 10 5 5.8 C 28 0.12 EEEHB1V100R (1) 1000 22 6.3 5.8 D 55 0.12 EEEHB1V220P (1) 1000 33 8 6.2 E 84 0.14 EEEHB1V330P (2) 1000 47 8 10.2 F 98 0.14 EEEHB1V470P (2) 500 100 10 10.2 G 160 0.14 EEEHB1V101P (2) 500 1 4 5.8 B 10 0.12 EEEHB1H1R0R (1) 2000 2.2 4 5.8 B 16 0.12 EEEHB1H2R2R (1) 2000 3.3 4 5.8 B 16 0.12 EEEHB1H3R3R (1) 2000 4.7 5 5.8 C 23 0.12 EEEHB1H4R7R (1) 1000 6.8 10 5 5.8 C 23 0.12 EEEHB1H6R8R (1) 1000 6.3 5.8 D 35 0.12 EEEHB1H100P (1) 1000 22 8 6.2 E 70 0.12 EEEHB1H220P (2) 1000 33 8 10.2 F 91 0.12 EEEHB1H330P (2) 500 47 10 10.2 G 100 0.12 EEEHB1H470P (2) 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list (Bi-polar) Endurance : 105 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 10 16 25 35 50 0D L Size code Specification Ripple tan d current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 35 0.60 Min. Packaging Q'ty Part No. Reflow Taping (pcs) 47 6.3 5.8 D EEEHP0J470P (1) 1000 10 4 5.8 B 20 0.44 EEEHP1A100R (1) 2000 33 6.3 5.8 D 26 0.44 EEEHP1A330P (1) 1000 10 5 5.8 C 25 0.32 EEEHP1C100R (1) 1000 3.3 4 5.8 B 12 0.28 EEEHP1E3R3R (1) 2000 4.7 4 5.8 B 12 0.28 EEEHP1E4R7R (1) 2000 10 6.3 5.8 D 28 0.28 EEEHP1E100P (1) 1000 22 6.3 5.8 D 55 0.28 EEEHP1E220P (1) 1000 2.2 4 5.8 B 10 0.24 EEEHP1V2R2R (1) 2000 1 4 5.8 B 10 0.24 EEEHP1H1R0R (1) 2000 3.3 6.3 5.8 D 16 0.24 EEEHP1H3R3P (1) 1000 4.7 6.3 5.8 D 23 0.24 EEEHP1H4R7P (1) 1000 Characteristics list (5.5 mm max.) Endurance : 105 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 0D L Size code 22 4 5.4 B 47 5 5.4 C 100 Specification Ripple current tan d (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 26 0.30 Min. Packaging Q'ty Part No. Reflow Taping (pcs) EEEHB0J220SR (1) 2000 46 0.30 EEEHB0J470SR (1) 1000 6.3 5.4 D 71 0.30 EEEHB0J101SP (1) 1000 10 33 5 5.4 C 43 0.22 EEEHB1A330SR (1) 1000 10 4 5.4 B 28 0.16 EEEHB1C100SR (1) 2000 16 22 5 5.4 C 39 0.16 EEEHB1C220SR (1) 1000 47 6.3 5.4 D 70 0.16 EEEHB1C470SP (1) 1000 25 35 50 4.7 4 5.4 B 22 0.14 EEEHB1E4R7SR (1) 2000 6.8 4 5.4 B 25 0.14 EEEHB1E6R8SR (1) 2000 33 6.3 5.4 D 65 0.14 EEEHB1E330SP (1) 1000 10 5 5.4 C 28 0.12 EEEHB1V100SR (1) 1000 22 6.3 5.4 D 55 0.12 EEEHB1V220SP (1) 1000 1 4 5.4 B 10 0.12 EEEHB1H1R0SR (1) 2000 2.2 4 5.4 B 16 0.12 EEEHB1H2R2SR (1) 2000 3.3 4 5.4 B 16 0.12 EEEHB1H3R3SR (1) 2000 4.7 5 5.4 C 23 0.12 EEEHB1H4R7SR (1) 1000 6.8 5 5.4 C 23 0.12 EEEHB1H6R8SR (1) 1000 6.3 5.4 D 35 0.12 EEEHB1H100SP (1) 1000 10 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Long life Surface Mount Type Series : HC Type : V HC ↑ HB Features ● Endurance : 105 °C 3000 h to 5000 h product is available upon request. (08 mm and larger) ● RoHS compliant ● Vibration-proof Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 50 V.DC 1 µF to 1000 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list After applying rated working voltage for +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. 04 to 06.3 (3000 hours After applying rated working voltage) 08 to 010 (5000 hours After applying rated working voltage) Capacitance change Within ±30 % of the initial value tan d < 300 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C ±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k to Correction factor 0.70 1.00 1.30 1.70 Capacitance (µF) 22 j HC Lot number R. Voltage 6.3 (V.DC) Code j L + W Pressure Relief (010 and larger) Series identification Mark for Lead-Free products (Black dot) (I) A±0.2 (P) Negative polarity marking (–) – H 0D±0.5 0.3 max. (I) Example : 6.3 V.DC 22 µF Marking color : BLACK K Dimensions B±0.2 Marking ( ) Reference size (Unit : mm) Rated voltage code 10 16 25 35 50 A C E V H Size L A, B H code 0D B 4.0 5.8±0.3 4.3 5.5 max. C 5.0 5.8±0.3 5.3 6.5 max. D 6.3 5.8±0.3 6.6 7.8 max. D8 6.3 7.7±0.3 6.6 7.8 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W P K 1.8 2.2 2.6 2.6 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 1.8 3.1 4.6 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.70±0.2 0.70±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 3000 h (08, 010 : 5000 h) Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 10 16 25 35 50 22 47 100 220 330 1000 33 220 10 22 47 100 470 33 47 100 330 4.7 10 22 33 220 1 2.2 3.3 4.7 10 22 33 47 100 0D L Size code 4 5 6.3 6.3 8 10 5 8 4 5 6.3 6.3 10 6.3 6.3 8 10 4 5 6.3 6.3 10 4 4 4 5 6.3 6.3 8 8 10 5.8 5.8 5.8 7.7 10.2 10.2 5.8 10.2 5.8 5.8 5.8 7.7 10.2 5.8 7.7 10.2 10.2 5.8 5.8 5.8 7.7 10.2 5.8 5.8 5.8 5.8 5.8 7.7 10.2 10.2 10.2 B C D D8 F G C F B C D D8 G D D8 F G B C D D8 G B B B C D D8 F F G Specification Ripple tan d current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 26 0.30 46 0.30 71 0.30 101 0.30 230 0.30 313 0.50 43 0.26 160 0.26 28 0.20 39 0.20 70 0.20 81 0.20 340 0.20 65 0.16 65 0.16 130 0.16 238 0.16 15 0.14 28 0.14 55 0.14 57 0.14 220 0.14 10 0.12 16 0.12 16 0.12 23 0.12 35 0.12 49 0.12 91 0.12 100 0.12 160 0.12 Min. Packaging Q'ty Part No. EEEHC0J220R EEEHC0J470R EEEHC0J101P EEEHC0J221XP EEEHC0J331P EEEHC0J102P EEEHC1A330R EEEHC1A221P EEEHC1C100R EEEHC1C220R EEEHC1C470P EEEHC1C101XP EEEHC1C471P EEEHC1E330P EEEHC1E470XP EEEHC1E101P EEEHC1E331P EEEHC1V4R7R EEEHC1V100R EEEHC1V220P EEEHC1V330XP EEEHC1V221P EEEHC1H1R0R EEEHC1H2R2R EEEHC1H3R3R EEEHC1H4R7R EEEHC1H100P EEEHC1H220XP EEEHC1H330P EEEHC1H470P EEEHC1H101P Reflow Taping (pcs) (1) (1) (1) (1) (2) (2) (1) (2) (1) (1) (1) (1) (2) (1) (1) (2) (2) (1) (1) (1) (1) (2) (1) (1) (1) (1) (1) (1) (2) (2) (2) 2000 1000 1000 900 500 500 1000 500 2000 1000 1000 900 500 1000 900 500 500 2000 1000 1000 900 500 2000 2000 2000 1000 1000 900 500 500 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : HD Type : V ❈ 6.3 V.DC to 35 V.DC : High temperature Lead-Free reflow (suffix : A✽) 50 V.DC to 100 V.DC : Standard Lead-Free reflow Features ● Endurance : 105 °C 5000 h is available upon request. (08 mm and larger) ● Vibration-proof product ● RoHS compliant Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 100 V.DC 1 µF to 1000 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 63 100 Z(–25 °C)/Z(+20 °C) 3 3 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 4 4 3 3 3 3 3 3 After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value < 300 % of the initial limit tan d DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Capacitance change Within ±20 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 0.70 1k 1.30 10 k to 1.70 0.3 max. Capacitance (µF) Lot number 35 50 C E V H (P) B±0.2 ( ) Reference size (Unit : mm) Mark for Lead-Free products (Black dot) 25 W Pressure Relief (010 and larger) Series identification 16 + L Rated voltage code R. Voltage 6.3 10 (V.DC) Code j A H 0D±0.5 Negative polarity marking (–) 330 j HD A±0.2 – K Example : 6.3 V.DC 330 µF Marking color : BLACK (I) Dimensions (I) Marking 120 1.00 63 100 J 2A Size L A, B code 0D B 4.0 5.8±0.3 4.3 C 5.0 5.8±0.3 5.3 D 6.3 5.8±0.3 6.6 D8 6.3 7.7±0.3 6.6 E 8.0 6.2±0.3 8.3 F 8.0 10.2±0.3 8.3 G 10.0 10.2±0.3 10.3 H I W P K 5.5 max. 6.5 max. 7.8 max. 7.8 max. 9.5 max. 10.0 max. 12.0 max. 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 1.8 2.2 3.1 4.6 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.70±0.20 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list (6.3 V.DC to 35 V.DC) Endurance : 105 °C 5000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 10 16 25 35 330 1000 100 220 330 10 22 47 100 220 470 4.7 10 22 33 47 100 330 4.7 10 22 33 47 100 220 Min. Packaging Q'ty Specification 0D L Size code 8 10 8 8 8 4.0 5.0 6.3 8 10 10 4 5 6.3 6.3 8 8 10 4 5 6.3 8 6.3 6.3 8 10 10 10.2 10.2 6.2 10.2 10.2 5.8 5.8 5.8 10.2 10.2 10.2 5.8 5.8 5.8 5.8 6.2 10.2 10.2 5.8 5.8 5.8 6.2 7.7 7.7 10.2 10.2 10.2 F G E F F B C D F G G B C D D E F G B C D E D8 D8 F G G Ripple Impedance tan d current Part No. (100 kHz) (120 Hz) (120 Hz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 230 1.5 0.30 EEEHD0J331AP 313 0.8 0.50 EEEHD0J102AP 62 2.0 0.30 EEEHD1A101AP 160 1.5 0.30 EEEHD1A221AP 160 1.5 0.30 EEEHD1A331AP 28 12.0 0.20 EEEHD1C100AR 39 7.2 0.20 EEEHD1C220AR 70 4.0 0.20 EEEHD1C470AP 130 1.5 0.20 EEEHD1C101AP 220 0.8 0.20 EEEHD1C221AP 340 0.8 0.20 EEEHD1C471AP 17 12.0 0.16 EEEHD1E4R7AR 28 7.2 0.16 EEEHD1E100AR 55 4.0 0.16 EEEHD1E220AP 55 4.0 0.16 EEEHD1E330AP 56 2.0 0.18 EEEHD1E470AP 130 1.5 0.16 EEEHD1E101AP 238 0.8 0.16 EEEHD1E331AP 17 12.0 0.13 EEEHD1V4R7AR 28 7.2 0.13 EEEHD1V100AR 55 4.0 0.13 EEEHD1V220AP 53 2.0 0.16 EEEHD1V330AP 57 2.0 0.13 EEEHDV330XAP 57 2.0 0.14 EEEHDV470XAP 79 1.5 0.14 EEEHD1V470AP 101 0.8 0.14 EEEHD1V101AP 220 0.8 0.14 EEEHD1V221AP Reflow Taping (pcs) (7) (7) (7) (7) (7) (5) (5) (5) (7) (7) (7) (5) (5) (5) (5) (7) (7) (7) (5) (5) (5) (7) (5) (5) (7) (7) (7) 500 500 1000 500 500 2000 1000 1000 500 500 500 2000 1000 1000 1000 1000 500 500 2000 1000 1000 1000 900 900 500 500 500 Characteristics list (50 V.DC to 100 V.DC) Endurance : 105 °C 5000 h Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 50 63 100 1 2.2 3.3 4.7 10 22 33 47 100 10 22 33 10 22 0D L Size code 4 4 4 5 6.3 8 8 10 10 8 8 10 8 10 5.8 5.8 5.8 5.8 5.8 6.2 10.2 10.2 10.2 6.2 10.2 10.2 10.2 10.2 B B B C D E F G G E F G F G Ripple Impedance tan d current Part No. (100 kHz) (120 Hz) (120 Hz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 7 12.0 0.12 EEEHD1H1R0R 12 12.0 0.12 EEEHD1H2R2R 16 12.0 0.12 EEEHD1H3R3R 21 7.2 0.12 EEEHD1H4R7R 33 4.0 0.12 EEEHD1H100P 50 2.0 0.14 EEEHD1H220P 74 1.5 0.14 EEEHD1H330P 94 0.8 0.14 EEEHD1H470P 94 0.8 0.14 EEEHD1H101P 45 2.0 0.18 EEEHD1J100P 65 1.5 0.18 EEEHD1J220P 80 0.8 0.18 EEEHD1J330P 55 1.5 0.18 EEEHD2A100P 70 0.8 0.18 EEEHD2A220P Min. Packaging Q'ty Reflow Taping (pcs) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (2) (2) (2) (2) 2000 2000 2000 1000 1000 1000 500 500 500 1000 500 500 500 500 If Part number exceeds 12 digits, voltage code is abbrevi ated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V, · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : Medium-size HD Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 105 °C 5000 h product is available upon request. ● RoHS compliant ● Vibration-proof Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life –55 °C to +105 °C 6.3 V.DC to 35 V.DC 680 µF to 7500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV (µA) After 2 minutes Please see the attached characteristics list After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Resistance to soldering heat AEC-Q200 Frequency correction factor for ripple current Frequency (Hz) Capacitance (µF) 680 to 1200 to 2700 to 1000 2200 7500 60 120 1k 10 k 100 k to 0.93 0.94 0.94 1.00 1.00 1.00 1.20 1.13 1.12 1.27 1.19 1.18 1.33 1.25 1.18 Capacitance (µF) 3300 j HD Series identification L Pressure Relief Mark for Lead-Free products (Black dot) Rated voltage code + W ( ) Reference size (Unit : mm) Lot number R. Voltage (V.DC) Code A±0.2 B±0.2 0D±0.5 Negative polarity marking (–) H – K 0.3 max. (P) Example : 6.3 V.DC 3300 µF Marking color : BLACK (I) Dimensions (I) Marking 6.3 10 16 25 35 j A C E V Size L A,B H I W P K code 0D H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.3 J16 16.0 16.5±0.5 17.0 19.0 max 5.5 1.20±0.3 6.7 0.70±0.3 K16 18.0 16.5±0.5 19.0 21.0 max 6.7 1.20±0.3 6.7 0.70±0.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 5000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 10 16 25 35 3300 6800 7500 2200 4700 6800 1500 3300 4700 1000 2200 3300 680 1500 1800 0D L Size code 12.5 16 18 12.5 16 18 12.5 16 18 12.5 16 18 12.5 16 18 13.5 16.5 16.5 13.5 16.5 16.5 13.5 16.5 16.5 13.5 16.5 16.5 13.5 16.5 16.5 H13 J16 K16 H13 J16 K16 H13 J16 K16 H13 J16 K16 H13 J16 K16 Specification Ripple tan d current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 680 0.32 1280 0.38 1540 0.40 620 0.24 1280 0.28 1540 0.32 620 0.18 1280 0.22 1540 0.24 580 0.16 1200 0.18 1540 0.20 580 0.14 1200 0.16 1450 0.16 Min. Packaging Q'ty Part No. EEEHD0J332AQ EEEHD0J682AM EEEHD0J752AM EEEHD1A222AQ EEEHD1A472AM EEEHD1A682AM EEEHD1C152AQ EEEHD1C332AM EEEHD1C472AM EEEHD1E102AQ EEEHD1E222AM EEEHD1E332AM EEEHD1V681AQ EEEHD1V152AM EEEHD1V182AM Reflow Taping (pcs) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) 200 125 125 200 125 125 200 125 125 200 125 125 200 125 125 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” or “M” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Low impedance Surface Mount Type Series : FC Type : V High temperature Lead-Free reflow (suffix : A✽) FC ↑ HA Features ● Endurance : 105 °C 1000 h ● Low impedance (1/2 for HA series) ● Vibration-proof product is available ● RoHS compliant upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 35 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 Z(–25 °C) / Z(+20 °C) 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C) / Z(+20 °C) 3 3 3 3 3 After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 0.70 1k 0.90 10 k 0.95 Capacitance (µF) 22 j FC L Series identification K A±0.2 (P) + (I) Negative polarity marking (–) – H 0D±0.5 0.3 max. W Pressure Relief (010 and larger) Mark for Lead-Free products (Black dot) (I) Dimensions Example : 6.3 V.DC 22 µF Marking color : BLACK ( ) Reference size (Unit : mm) Rated voltage code Lot number R. Voltage (V.DC) Code 100 k to 1.00 B±0.2 Marking 120 0.75 6.3 10 16 25 35 j A C E V Size L A, B H code 0D +0.1 4.3 5.5 max. B 4.0 5.4 -0.2 5.3 6.5 max. C 5.0 5.4 +0.1 -0.2 6.6 7.8 max. D 6.3 5.4 +0.1 -0.2 E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W P K 1.8 2.2 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 2.2 3.1 4.6 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.70±0.2 0.70±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 1000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 10 16 25 35 22 47 68 100 220 330 1000 1500 33 100 150 220 470 1000 10 22 47 68 100 220 330 470 680 6.8 22 33 47 68 100 220 330 470 1 2.2 3.3 4.7 6.8 10 22 33 47 100 220 330 0D L Size code 4 5 6.3 6.3 8 8 10 10 5 8 8 8 10 10 4 5 6.3 8 8 10 10 10 10 4 6.3 6.3 8 8 8 10 10 10 4 4 4 4 5 5 6.3 8 8 10 10 10 5.4 5.4 5.4 5.4 6.2 10.2 10.2 10.2 5.4 6.2 6.2 10.2 10.2 10.2 5.4 5.4 5.4 6.2 6.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 6.2 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 6.2 10.2 10.2 10.2 B C D D E F G G C E E F G G B C D E E G G G G B D D E F F G G G B B B B C C D E E G G G Specification Ripple Impedance tan d current (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 60 3.00 0.26 95 1.80 0.26 140 1.00 0.26 140 1.00 0.26 230 0.40 0.26 450 0.30 0.26 670 0.15 0.26 670 0.15 0.26 95 1.80 0.19 230 0.40 0.19 230 0.40 0.19 450 0.30 0.19 670 0.15 0.19 670 0.15 0.19 60 3.00 0.16 95 1.80 0.16 140 1.00 0.16 230 0.40 0.16 230 0.40 0.16 670 0.15 0.16 670 0.15 0.16 670 0.15 0.16 670 0.15 0.16 60 3.00 0.14 140 1.00 0.14 140 1.00 0.14 230 0.40 0.14 450 0.30 0.14 450 0.30 0.14 670 0.15 0.14 670 0.15 0.14 670 0.15 0.14 60 3.00 0.12 60 3.00 0.12 60 3.00 0.12 60 3.00 0.12 95 1.80 0.12 95 1.80 0.12 140 1.00 0.12 230 0.40 0.12 230 0.40 0.12 670 0.15 0.12 670 0.15 0.12 670 0.15 0.12 Min. Packaging Q'ty Part No. Reflow EEEFC0J220AR EEEFC0J470AR EEEFC0J680AP EEEFC0J101AP EEEFC0J221AP EEEFC0J331AP EEEFC0J102AP EEEFC0J152AP EEEFC1A330AR EEEFC1A101AP EEEFC1A151AP EEEFC1A221AP EEEFC1A471AP EEEFC1A102AP EEEFC1C100AR EEEFC1C220AR EEEFC1C470AP EEEFC1C680AP EEEFC1C101AP EEEFC1C221AP EEEFC1C331AP EEEFC1C471AP EEEFC1C681AP EEEFC1E6R8AR EEEFC1E220AP EEEFC1E330AP EEEFC1E470AP EEEFC1E680AP EEEFC1E101AP EEEFC1E221AP EEEFC1E331AP EEEFC1E471AP EEEFC1V1R0AR EEEFC1V2R2AR EEEFC1V3R3AR EEEFC1V4R7AR EEEFC1V6R8AR EEEFC1V100AR EEEFC1V220AP EEEFC1V330AP EEEFC1V470AP EEEFC1V101AP EEEFC1V221AP EEEFC1V331AP (5) (5) (5) (5) (6) (6) (6) (6) (5) (6) (6) (6) (6) (6) (5) (5) (5) (6) (6) (6) (6) (6) (6) (5) (5) (5) (6) (6) (6) (6) (6) (6) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) Taping (pcs) 2000 1000 1000 1000 1000 500 500 500 1000 1000 1000 500 500 500 2000 1000 1000 1000 1000 500 500 500 500 2000 1000 1000 1000 500 500 500 500 500 2000 2000 2000 2000 1000 1000 1000 1000 1000 500 500 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Low impedance Surface Mount Type Series : FC Type : V FC ↑ HA Features ● Endurance : 105 °C 1000 h ● Low impedance (1/2 for HA series) ● Vibration-proof product is available ● RoHS compliant upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 50 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C) / Z(+20 °C) 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C) / Z(+20 °C) 3 3 3 3 3 3 After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k 100 k to Correction factor 0.70 0.75 0.90 0.95 1.00 Capacitance (µF) 22 j FC L Series identification Mark for Lead-Free products (Black dot) Rated voltage code (P) W Pressure Relief (010 and larger) ( ) Reference size (Unit : mm) Lot number R. Voltage 6.3 (V.DC) Code j + (I) Negative polarity marking (–) A±0.2 – H 0D±0.5 0.3 max. K Example : 6.3 V.DC 22 µF Marking color : BLACK (I) Dimensions B±0.2 Marking 10 16 25 35 50 A C E V H Size L A, B H code 0D + 0.1 4.3 5.5 max. B 4.0 5.4 - 0.2 C 5.0 5.4 +- 0.1 5.3 6.5 max. 0.2 D 6.3 5.4 +- 0.1 6.6 7.8 max. 0.2 E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W P K 1.8 2.2 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 2.2 3.1 4.6 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.70±0.2 0.70±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 1000 h Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 10 16 25 35 50 22 47 68 100 220 330 1000 1500 33 100 150 220 470 1000 10 22 47 68 100 220 330 470 680 6.8 22 33 47 68 100 220 330 470 1 2.2 3.3 4.7 6.8 10 22 33 47 100 220 330 1 2.2 3.3 4.7 10 22 33 47 100 220 0D L Size code 4 5 6.3 6.3 8 8 10 10 5 8 8 8 10 10 4 5 6.3 8 8 10 10 10 10 4 6.3 6.3 8 8 8 10 10 10 4 4 4 4 5 5 6.3 8 8 10 10 10 4 4 4 5 6.3 8 8 10 10 10 5.4 5.4 5.4 5.4 6.2 10.2 10.2 10.2 5.4 6.2 6.2 10.2 10.2 10.2 5.4 5.4 5.4 6.2 6.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 6.2 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 6.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 6.2 10.2 10.2 10.2 10.2 B C D D E F G G C E E F G G B C D E E G G G G B D D E F F G G G B B B B C C D E E G G G B B B C D E F G G G Ripple Impedance tan d current (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 60 3.00 0.26 95 1.80 0.26 140 1.00 0.26 140 1.00 0.26 230 0.40 0.26 450 0.30 0.26 670 0.15 0.26 670 0.15 0.26 95 1.80 0.19 230 0.40 0.19 230 0.40 0.19 450 0.30 0.19 670 0.15 0.19 670 0.15 0.19 60 3.00 0.16 95 1.80 0.16 140 1.00 0.16 230 0.40 0.16 230 0.40 0.16 670 0.15 0.16 670 0.15 0.16 670 0.15 0.16 670 0.15 0.16 60 3.00 0.14 140 1.00 0.14 140 1.00 0.14 230 0.40 0.14 450 0.30 0.14 450 0.30 0.14 670 0.15 0.14 670 0.15 0.14 670 0.15 0.14 60 3.00 0.12 60 3.00 0.12 60 3.00 0.12 60 3.00 0.12 95 1.80 0.12 95 1.80 0.12 140 1.00 0.12 230 0.40 0.12 230 0.40 0.12 670 0.15 0.12 670 0.15 0.12 670 0.15 0.12 30 5.00 0.12 30 5.00 0.12 30 5.00 0.12 50 3.00 0.12 70 2.00 0.12 120 0.70 0.12 300 0.60 0.12 500 0.30 0.12 500 0.30 0.12 500 0.30 0.12 Min. Packaging Q'ty Part No. EEEFC0J220R EEEFC0J470R EEEFC0J680P EEEFC0J101P EEEFC0J221P EEEFC0J331P EEEFC0J102P EEEFC0J152P EEEFC1A330R EEEFC1A101P EEEFC1A151P EEEFC1A221P EEEFC1A471P EEEFC1A102P EEEFC1C100R EEEFC1C220R EEEFC1C470P EEEFC1C680P EEEFC1C101P EEEFC1C221P EEEFC1C331P EEEFC1C471P EEEFC1C681P EEEFC1E6R8R EEEFC1E220P EEEFC1E330P EEEFC1E470P EEEFC1E680P EEEFC1E101P EEEFC1E221P EEEFC1E331P EEEFC1E471P EEEFC1V1R0R EEEFC1V2R2R EEEFC1V3R3R EEEFC1V4R7R EEEFC1V6R8R EEEFC1V100R EEEFC1V220P EEEFC1V330P EEEFC1V470P EEEFC1V101P EEEFC1V221P EEEFC1V331P EEEFC1H1R0R EEEFC1H2R2R EEEFC1H3R3R EEEFC1H4R7R EEEFC1H100P EEEFC1H220P EEEFC1H330P EEEFC1H470P EEEFC1H101P EEEFC1H221P Reflow Taping (pcs) (1) (1) (1) (1) (2) (2) (2) (2) (1) (2) (2) (2) (2) (2) (1) (1) (1) (2) (2) (2) (2) (2) (2) (1) (1) (1) (2) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) 2000 1000 1000 1000 1000 500 500 500 1000 1000 1000 500 500 500 2000 1000 1000 1000 1000 500 500 500 500 2000 1000 1000 1000 500 500 500 500 500 2000 2000 2000 2000 1000 1000 1000 1000 1000 500 500 500 2000 2000 2000 1000 1000 1000 500 500 500 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FK Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 105 °C 2000 h ● Low impedance (40 % to 60 % less than FC series) Miniaturized (30 % to 50 % less than FC series) ● Vibration-proof product is available upon request. (08 mm and larger) ● RoHS compliant Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) –55 °C to +105 °C 6.3 V.DC to 35 V.DC 4.7 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 Z(–25 °C)/Z(+20 °C) 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 3 3 3 3 3 Z(–55 °C)/Z(+20 °C) 4 4 4 3 3 After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 Frequency correction factor for ripple current Frequency (Hz) Capacitance (µF) 4.7 to 680 to 470 1500 120 1k 10 k 100 k to 0.65 0.70 0.85 0.90 0.95 0.95 1.00 1.00 0.3 max. 22 j FK L Pressure Relief (010 and larger) Series identification Mark for Lead-Free products (Black dot) Rated voltage code Lot number R. Voltage (V.DC) Code 6.3 10 16 25 35 j A C E V Size code B C D D8 E F G 0D L A, B 4.0 5.8±0.3 4.3 5.0 5.8±0.3 5.3 6.3 5.8±0.3 6.6 6.3 7.7±0.3 6.6 8.0 6.2±0.3 8.3 8.0 10.2±0.3 8.3 10.0 10.2±0.3 10.3 (P) + (I) Capacitance (µF) A±0.2 B±0.2 Negative polarity marking (–) – H 0D±0.5 Example : 6.3 V.DC 22 µF Marking color : BLACK (I) Dimensions K Marking W ( ) Reference size (Unit : mm) H I W 5.5 max. 6.5 max. 7.8 max. 7.8 max. 9.5 max. 10.0 max. 12.0 max. 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P K 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 + 0.15 1.8 0.35 - 0.20 1.8 0.35 +- 0.15 0.20 2.2 0.35 +- 0.15 0.20 3.1 0.70±0.20 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 2000 h Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 22 47 100 6.3 220 330 470 1000 1500 22 33 150 10 220 330 470 680 1000 10 22 47 16 68 100 150 220 330 470 680 10 22 33 25 47 68 100 150 220 330 470 4.7 10 35 22 33 47 68 100 150 220 330 ✽ 0D L Size code 4 4 5 5 6.3 6.3 6.3 8 8 8 10 4 4 5 6.3 6.3 8 8 8 8 10 4 4 5 5 6.3 6.3 6.3 6.3 6.3 8 8 8 10 4 5 5 6.3 6.3 6.3 6.3 8 8 8 8 10 4 4 5 5 6.3 6.3 6.3 6.3 8 8 8 10 5.8 5.8 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 5.8 7.7 7.7 6.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 7.7 7.7 10.2 10.2 10.2 10.2 B (B) C (C) D D D8 E F F G B (B) C D D8 E F F F G B (B) C (C) D D D D8 D8 E F F G B C (C) D D D D8 E F F F G B (B) C C D D D8 D8 F F F G Ripple Impedance tan d current Part No. (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 90 1.35 0.26 EEEFK0J220AR 90 1.35 0.26 EEEFKJ470UAR 160 0.70 0.26 EEEFK0J470AR 160 0.70 0.26 EEEFKJ101UAR 240 0.36 0.26 EEEFK0J101AP 240 0.36 0.26 EEEFK0J221AP 280 0.34 0.26 EEEFKJ331XAP 300 0.26 0.26 EEEFK0J331AP 600 0.16 0.26 EEEFK0J471AP 600 0.16 0.26 EEEFK0J102AP 850 0.08 0.26 EEEFK0J152AP 90 1.35 0.19 EEEFK1A220AR 90 1.35 0.19 EEEFKA330UAR 160 0.70 0.19 EEEFK1A330AR 240 0.36 0.19 EEEFK1A151AP 280 0.34 0.19 EEEFKA221XAP 300 0.26 0.19 EEEFK1A221AP 600 0.16 0.19 EEEFK1A331AP 600 0.16 0.19 EEEFK1A471AP 600 0.16 0.19 EEEFK1A681AP 850 0.08 0.19 EEEFK1A102AP 90 1.35 0.16 EEEFK1C100AR 90 1.35 0.16 EEEFKC220UAR 160 0.70 0.16 EEEFK1C220AR 160 0.70 0.16 EEEFKC470UAR 240 0.36 0.16 EEEFK1C470AP 240 0.36 0.16 EEEFK1C680AP 240 0.36 0.16 EEEFK1C101AP 280 0.34 0.16 EEEFKC151XAP 280 0.34 0.16 EEEFKC221XAP 300 0.26 0.16 EEEFK1C221AP 600 0.16 0.16 EEEFK1C331AP 600 0.16 0.16 EEEFK1C471AP 850 0.08 0.16 EEEFK1C681AP 90 1.35 0.14 EEEFK1E100AR 160 0.70 0.14 EEEFK1E220AR 160 0.70 0.14 EEEFKE330UAR 240 0.36 0.14 EEEFK1E330AP 240 0.36 0.14 EEEFK1E470AP 240 0.36 0.14 EEEFK1E680AP 280 0.34 0.14 EEEFKE101XAP 300 0.26 0.14 EEEFK1E101AP 600 0.16 0.14 EEEFK1E151AP 600 0.16 0.14 EEEFK1E221AP 600 0.16 0.14 EEEFK1E331AP 850 0.08 0.14 EEEFK1E471AP 90 1.35 0.12 EEEFK1V4R7AR 90 1.35 0.12 EEEFKV100UAR 160 0.70 0.12 EEEFK1V100AR 160 0.70 0.12 EEEFK1V220AR 240 0.36 0.12 EEEFK1V330AP 240 0.36 0.12 EEEFK1V470AP 280 0.34 0.12 EEEFKV680XAP 280 0.34 0.12 EEEFKV101XAP 600 0.16 0.12 EEEFK1V101AP 600 0.16 0.12 EEEFK1V151AP 600 0.16 0.12 EEEFK1V221AP 850 0.08 0.12 EEEFK1V331AP Min. Packaging Q'ty Reflow Taping (pcs) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (5) (5) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (5) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) 2000 2000 1000 1000 1000 1000 900 1000 500 500 500 2000 2000 1000 1000 900 1000 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 900 900 1000 500 500 500 2000 1000 1000 1000 1000 1000 900 1000 500 500 500 500 2000 2000 1000 1000 1000 1000 900 900 500 500 500 500 ✽ Size code( ) : Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : Medium-size FK Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 105 °C 5000 h ● Vibration-proof product is available ● RoHS compliant upon request. Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –55 °C to +105 °C 6.3 V.DC to 100 V.DC 47 µF to 6800 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV (µA) After 2 minutes Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 63 80 100 Z(–25 °C)/Z(+20 °C) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 3 3 3 3 3 3 3 3 3 Z(–55 °C)/Z(+20 °C) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.75 Marking 1k 0.90 10 k 0.95 100 k to 1.00 Dimensions Series identification Mark for Lead-Free products (Black dot) + L Pressure Relief K (P) B±0.2 Capacitance (µF) 3300 j FK H 0D±0.5 Negative polarity marking (–) A±0.2 – (I) 0.3 max. (I) Example : 6.3 V.DC 3300 µF Marking color : BLACK W ( ) Reference Rated voltage code Lot number R. Voltage 6.3 10 16 25 35 50 63 80 100 (V.DC) Code j A C E V H J K 2A (Unit : mm) Size code H13 J16 K16 0D L A, B H I W P K 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.30 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.30 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.30 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 5000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 10 16 25 35 50 63 80 100 3300 6800 2200 4700 6800 1500 3300 4700 1000 1500 2200 3300 470 680 1000 1500 330 390 470 560 680 1000 150 220 470 680 68 100 150 330 470 47 68 100 150 220 330 Min. Packaging Q'ty Specification 0D L Size code 12.5 16 12.5 16 18 12.5 16 18 12.5 16 16 18 12.5 12.5 16 16 12.5 12.5 16 16 16 16 12.5 12.5 16 18 12.5 12.5 12.5 16 18 12.5 12.5 16 16 18 18 13.5 16.5 13.5 16.5 16.5 13.5 16.5 16.5 13.5 16.5 16.5 16.5 13.5 13.5 16.5 16.5 13.5 13.5 16.5 16.5 16.5 16.5 13.5 13.5 16.5 16.5 13.5 13.5 13.5 16.5 16.5 13.5 13.5 16.5 16.5 16.5 16.5 H13 J16 H13 J16 K16 H13 J16 K16 H13 J16 J16 K16 H13 H13 J16 J16 H13 H13 J16 J16 J16 J16 H13 H13 J16 K16 H13 H13 H13 J16 K16 H13 H13 J16 J16 K16 K16 Ripple Impedance tan d current Part No. (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 1100 0.06 0.30 EEEFK0J332AQ 1800 0.035 0.36 EEEFK0J682AM 1100 0.06 0.21 EEEFK1A222AQ 1800 0.035 0.25 EEEFK1A472AM 2060 0.033 0.29 EEEFK1A682AM 1100 0.06 0.16 EEEFK1C152AQ 1800 0.035 0.20 EEEFK1C332AM 2060 0.033 0.22 EEEFK1C472AM 1100 0.06 0.14 EEEFK1E102AQ 1800 0.035 0.16 EEEFK1E152AM 1800 0.035 0.16 EEEFK1E222AM 2060 0.033 0.18 EEEFK1E332AM 1100 0.06 0.12 EEEFK1V471AQ 1100 0.06 0.12 EEEFK1V681AQ 1800 0.035 0.12 EEEFK1V102AM 1800 0.035 0.12 EEEFK1V152AM 900 0.12 0.12 EEEFK1H331AQ 900 0.12 0.12 EEEFK1H391AQ 1610 0.073 0.12 EEEFK1H471AM 1610 0.073 0.12 EEEFK1H561AM 1610 0.073 0.12 EEEFK1H681AM 1610 0.073 0.12 EEEFK1H102AM 800 0.16 0.10 EEEFK1J151AQ 800 0.16 0.10 EEEFK1J221AQ 1410 0.082 0.10 EEEFK1J471AM 1690 0.08 0.10 EEEFK1J681AM 500 0.32 0.08 EEEFK1K680AQ 500 0.32 0.08 EEEFK1K101AQ 500 0.32 0.08 EEEFK1K151AQ 793 0.17 0.08 EEEFK1K331AM 917 0.153 0.08 EEEFK1K471AM 500 0.32 0.07 EEEFK2A470AQ 500 0.32 0.07 EEEFK2A680AQ 793 0.17 0.07 EEEFK2A101AM 793 0.17 0.07 EEEFK2A151AM 917 0.153 0.07 EEEFK2A221AM 917 0.153 0.07 EEEFK2A331AM Reflow Taping (pcs) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (10) (10) (10) (10) (10) (10) (10) (10) (10) (10) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) 200 125 200 125 125 200 125 125 200 125 125 125 200 200 125 125 200 200 125 125 125 125 200 200 125 125 200 200 200 125 125 200 200 125 125 125 125 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “Q” or “M” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FK Type : V Features ● Endurance : 105 °C 2000 h to 5000 h ● Low impedance (40 % to 60 % less than FC series) Miniaturized (30 % to 50 % less than FC series) ● Vibration-proof product is available upon request. (08 mm and larger) ● RoHS compliant Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –55 °C to +105 °C 6.3 V.DC to 100 V.DC 3.3 µF to 6800 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 63 80 100 Z(–25 °C)/Z(+20 °C) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 3 3 3 3 3 3 3 3 3 Z(–55 °C)/Z(+20 °C) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. ( > 012.5 and suffix “G” in 08×10.2, 010×10.2 are 5000 hours) Capacitance change Within ±30 % of the initial value (Suffix “G” is 35 %) < 200 % of the initial limit (Suffix “G” is 300 %) tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 0.70 1k 0.90 K (I) (P) (I) + L Pressure Relief (010 and larger) Rated Voltage code A±0.2 – H 0D±0.5 Series identification Mark for Lead-Free products (Black dot) W ( ) Reference size (Unit : mm) > 012.5 Lot number 0.3 max. Capacitance (µF) 22 j FK Lot number Negative polarity marking (–) 100 k to 1.00 Dimensions Example : 6.3 V.DC 22 µF, 6.3 V.DC 3300 µF Marking color : BLACK < 010 Negative polarity marking (–) 10 k 0.95 B±0.2 Marking 120 0.75 Capacitance (µF) 3300 j FK Series identification Rated Voltage code R. Voltage 6.3 10 16 25 35 50 63 80 100 (V.DC) Code j A C E V H J K 2A Size code B C D D8 E F G H13 J16 K16 0D L A,B 4.0 5.0 6.3 6.3 8.0 8.0 10.0 12.5 16.0 18.0 5.8±0.3 5.8±0.3 5.8±0.3 7.7±0.3 6.2±0.3 10.2±0.3 10.2±0.3 13.5±0.5 16.5±0.5 16.5±0.5 4.3 5.3 6.6 6.6 8.3 8.3 10.3 13.5 17.0 19.0 H 5.5 6.5 7.8 7.8 9.5 10.0 12.0 15.0 19.0 21.0 max. max. max. max. max. max. max. max. max. max. I W P K 1.8 2.2 2.6 2.6 3.4 3.4 3.5 4.7 5.5 6.7 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 0.90±0.3 1.20±0.3 1.20±0.3 1.0 1.5 1.8 1.8 2.2 3.1 4.6 4.4 6.7 6.7 0.35 -+1.5 0.2 0.35 -+1.5 0.2 0.35 -+1.5 0.2 0.35 -+1.5 0.2 0.35 -+1.5 0.2 0.70±0.2 0.70±0.2 0.70±0.3 0.70±0.3 0.70±0.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 2000 h (> 012.5 : 5000 h) Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 22 47 100 220 6.3 330 470 1000 1500 3300 6800 22 33 150 220 10 330 470 680 1000 2200 4700 6800 10 22 47 16 68 100 150 220 330 470 680 1500 3300 4700 10 22 33 47 68 100 25 150 220 330 470 1000 1500 2200 3300 ✽ 0D L Size code 4 4 5 5 6.3 6.3 6.3 8 8 8 10 12.5 16 4 4 5 6.3 6.3 8 8 8 8 10 12.5 16 18 4 4 5 5 6.3 6.3 6.3 6.3 6.3 8 8 8 10 12.5 16 18 4 5 5 6.3 6.3 6.3 6.3 8 8 8 8 10 12.5 16 16 18 5.8 5.8 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 13.5 16.5 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 13.5 16.5 16.5 5.8 5.8 5.8 5.8 5.8 5.8 5.8 7.7 7.7 6.2 10.2 10.2 10.2 13.5 16.5 16.5 5.8 5.8 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 13.5 16.5 16.5 16.5 B (B) C (C) D D D8 E F F G H13 J16 B (B) C D D8 E F F F G H13 J16 K16 B (B) C (C) D D D D8 D8 E F F G H13 J16 K16 B C (C) D D D D8 E F F F G H13 J16 J16 K16 Ripple Impedance tan d current Part No. (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 90 1.35 0.26 EEEFK0J220R 90 1.35 0.26 EEEFK0J470UR 160 0.70 0.26 EEEFK0J470R 160 0.70 0.26 EEEFK0J101UR 240 0.36 0.26 EEEFK0J101P 240 0.36 0.26 EEEFK0J221P 280 0.34 0.26 EEEFK0J331XP 300 0.26 0.26 EEEFK0J331P 600 0.16 0.26 EEEFK0J471P 600 0.16 0.26 EEEFK0J102P 850 0.08 0.26 EEEFK0J152P 1100 0.06 0.30 EEVFK0J332Q 1800 0.035 0.36 EEVFK0J682M 90 1.35 0.19 EEEFK1A220R 90 1.35 0.19 EEEFK1A330UR 160 0.70 0.19 EEEFK1A330R 240 0.36 0.19 EEEFK1A151P 280 0.34 0.19 EEEFK1A221XP 300 0.26 0.19 EEEFK1A221P 600 0.16 0.19 EEEFK1A331P 600 0.16 0.19 EEEFK1A471P 600 0.16 0.19 EEEFK1A681P 850 0.08 0.19 EEEFK1A102P 1100 0.06 0.21 EEVFK1A222Q 1800 0.035 0.25 EEVFK1A472M 2060 0.033 0.29 EEVFK1A682M 90 1.35 0.16 EEEFK1C100R 90 1.35 0.16 EEEFK1C220UR 160 0.70 0.16 EEEFK1C220R 160 0.70 0.16 EEEFK1C470UR 240 0.36 0.16 EEEFK1C470P 240 0.36 0.16 EEEFK1C680P 240 0.36 0.16 EEEFK1C101P 280 0.34 0.16 EEEFK1C151XP 280 0.34 0.16 EEEFK1C221XP 300 0.26 0.16 EEEFK1C221P 600 0.16 0.16 EEEFK1C331P 600 0.16 0.16 EEEFK1C471P 850 0.08 0.16 EEEFK1C681P 1100 0.06 0.16 EEVFK1C152Q 1800 0.035 0.20 EEVFK1C332M 2060 0.033 0.22 EEVFK1C472M 90 1.35 0.14 EEEFK1E100R 160 0.70 0.14 EEEFK1E220R 160 0.70 0.14 EEEFK1E330UR 240 0.36 0.14 EEEFK1E330P 240 0.36 0.14 EEEFK1E470P 240 0.36 0.14 EEEFK1E680P 280 0.34 0.14 EEEFK1E101XP 300 0.26 0.14 EEEFK1E101P 600 0.16 0.14 EEEFK1E151P 600 0.16 0.14 EEEFK1E221P 600 0.16 0.14 EEEFK1E331P 850 0.08 0.14 EEEFK1E471P 1100 0.06 0.14 EEVFK1E102Q 1800 0.035 0.14 EEVFK1E152M 1800 0.035 0.16 EEVFK1E222M 2060 0.033 0.18 EEVFK1E332M Min. Packaging Q'ty Reflow Taping (pcs) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (3) (3) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (3) (3) (3) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (3) (3) (3) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (3) (3) (3) (3) 2000 2000 1000 1000 1000 1000 900 1000 500 500 500 200 125 2000 2000 1000 1000 900 1000 500 500 500 500 200 125 125 2000 2000 1000 1000 1000 1000 1000 900 900 1000 500 500 500 200 125 125 2000 1000 1000 1000 1000 1000 900 1000 500 500 500 500 200 125 125 125 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 2000 h (> 012.5 : 5000 h) Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 4.7 10 22 33 47 68 35 100 150 220 330 470 680 1000 1500 4.7 10 22 33 47 50 100 150 220 330 390 470 560 680 1000 4.7 10 22 63 33 47 68 100 150 220 470 680 3.3 4.7 10 80 22 33 47 68 100 150 330 470 ✽ 0D L Size code 4 4 5 5 6.3 6.3 6.3 6.3 8 8 8 10 12.5 12.5 16 16 4 5 6.3 6.3 6.3 8 6.3 8 8 10 10 12.5 12.5 16 16 16 16 5 6.3 6.3 8 8 8 8 10 12.5 12.5 16 18 5 6.3 6.3 8 8 8 10 12.5 12.5 12.5 16 18 5.8 5.8 5.8 5.8 5.8 5.8 7.7 7.7 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 5.8 5.8 5.8 5.8 7.7 6.2 7.7 6.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 16.5 16.5 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 5.8 5.8 7.7 6.2 10.2 10.2 10.2 13.5 13.5 13.5 16.5 16.5 B (B) C C D D D8 D8 F F F G H13 H13 J16 J16 B (C) D D D8 E D8 E F G G H13 H13 J16 J16 J16 J16 C D D8 E F F (F) G H13 H13 J16 K16 C D D8 E F F G H13 H13 H13 J16 K16 Ripple Impedance tan d current Part No. (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 90 1.35 0.12 EEEFK1V4R7R 90 1.35 0.12 EEEFK1V100UR 160 0.70 0.12 EEEFK1V100R 160 0.70 0.12 EEEFK1V220R 240 0.36 0.12 EEEFK1V330P 240 0.36 0.12 EEEFK1V470P 280 0.34 0.12 EEEFK1V680XP 280 0.34 0.12 EEEFK1V101XP 600 0.16 0.12 EEEFK1V101P 600 0.16 0.12 EEEFK1V151P 600 0.16 0.12 EEEFK1V221P 850 0.08 0.12 EEEFK1V331P 1100 0.06 0.12 EEVFK1V471Q 1100 0.06 0.12 EEVFK1V681Q 1800 0.035 0.12 EEVFK1V102M 1800 0.035 0.12 EEVFK1V152M 60 2.90 0.10 EEEFK1H4R7R 85 1.52 0.10 EEEFK1H100UR 165 0.88 0.10 EEEFK1H100P 165 0.88 0.10 EEEFK1H220P 195 0.68 0.10 EEEFK1H330XP 195 0.68 0.10 EEEFK1H330P 195 0.68 0.10 EEEFK1H470XP 195 0.68 0.10 EEEFK1H470P 350 0.34 0.10 EEEFK1H101P 670 0.18 0.10 EEEFK1H151P 670 0.18 0.10 EEEFK1H221P 900 0.12 0.10 EEVFK1H331Q 900 0.12 0.10 EEVFK1H391Q 1610 0.073 0.10 EEVFK1H471M 1610 0.073 0.10 EEVFK1H561M 1610 0.073 0.10 EEVFK1H681M 1610 0.073 0.10 EEVFK1H102M 50 3.00 0.08 EEEFK1J4R7R 80 1.50 0.08 EEEFK1J100P 120 1.20 0.08 EEEFK1J220XP 120 1.20 0.08 EEEFK1J220P 250 0.65 0.08 EEEFK1J330P 250 0.65 0.08 EEEFK1J470P 250 0.65 0.08 EEEFK1J680UP 400 0.35 0.08 EEEFK1J101P 800 0.16 0.08 EEVFK1J151Q 800 0.16 0.08 EEVFK1J221Q 1410 0.082 0.08 EEVFK1J471M 1690 0.08 0.08 EEVFK1J681M 25 5.00 0.08 EEEFK1K3R3R 40 3.00 0.08 EEEFK1K4R7P 60 2.40 0.08 EEEFK1K100XP 60 2.40 0.08 EEEFK1K100P 130 1.30 0.08 EEEFK1K220P 130 1.30 0.08 EEEFK1K330P 200 0.70 0.08 EEEFK1K470P 500 0.32 0.08 EEVFK1K680Q 500 0.32 0.08 EEVFK1K101Q 500 0.32 0.08 EEVFK1K151Q 793 0.17 0.08 EEVFK1K331M 917 0.153 0.08 EEVFK1K471M Min. Packaging Q'ty Reflow Taping (pcs) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (3) (3) (3) (3) (1) (1) (1) (1) (1) (2) (1) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) (1) (1) (1) (2) (2) (2) (2) (2) (3) (3) (3) (3) (1) (1) (1) (2) (2) (2) (2) (3) (3) (3) (3) (3) 2000 2000 1000 1000 1000 1000 900 900 500 500 500 500 200 200 125 125 2000 1000 1000 1000 900 1000 900 1000 500 500 500 200 200 125 125 125 125 1000 1000 900 1000 500 500 500 500 200 200 125 125 1000 1000 900 1000 500 500 500 200 200 200 125 125 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 2000 h (> 012.5 : 5000 h) Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 100 22 33 47 68 100 150 220 330 ✽ 0D L Size code 8 10 12.5 12.5 16 16 18 18 10.2 10.2 13.5 13.5 16.5 16.5 16.5 16.5 F G H13 H13 J16 J16 K16 K16 Min. Packaging Q'ty Ripple Impedance tan d current Part No. (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 130 1.30 0.07 EEEFK2A220P 200 0.70 0.07 EEEFK2A330P 500 0.32 0.07 EEVFK2A470Q 500 0.32 0.07 EEVFK2A680Q 793 0.17 0.07 EEVFK2A101M 793 0.17 0.07 EEVFK2A151M 917 0.153 0.07 EEVFK2A221M 917 0.153 0.07 EEVFK2A331M Reflow Taping (pcs) (2) (2) (3) (3) (3) (3) (3) (3) 500 500 200 200 125 125 125 125 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. Characteristics list Endurance : 105 °C 5000 h Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 10 16 25 35 50 470 1000 1500 330 470 680 1000 330 470 680 150 220 330 470 100 150 220 330 100 150 220 ✽ 0D 8 8 10 8 8 8 10 8 8 10 8 8 8 10 8 8 8 10 8 10 10 L Size code 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 F F G F F F G F F G F F F G F F F G F G G Ripple Impedance tan d current Part No. (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 600 0.16 0.26 EEEFK0J471GP 600 0.16 0.26 EEEFK0J102GP 850 0.08 0.26 EEEFK0J152GP 600 0.16 0.19 EEEFK1A331GP 600 0.16 0.19 EEEFK1A471GP 600 0.16 0.19 EEEFK1A681GP 850 0.08 0.19 EEEFK1A102GP 600 0.16 0.16 EEEFK1C331GP 600 0.16 0.16 EEEFK1C471GP 850 0.08 0.16 EEEFK1C681GP 600 0.16 0.14 EEEFK1E151GP 600 0.16 0.14 EEEFK1E221GP 600 0.16 0.14 EEEFK1E331GP 850 0.08 0.14 EEEFK1E471GP 600 0.16 0.12 EEEFK1V101GP 600 0.16 0.12 EEEFK1V151GP 600 0.16 0.12 EEEFK1V221GP 850 0.08 0.12 EEEFK1V331GP 350 0.34 0.10 EEEFK1H101GP 670 0.18 0.10 EEEFK1H151GP 670 0.18 0.10 EEEFK1H221GP Min. Packaging Q'ty Reflow Taping (pcs) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 NEW Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 6.3 10 16 25 35 50 270 470 1800 220 330 820 1200 150 270 560 1000 100 150 180 390 680 68 82 120 270 470 39 82 180 270 Min. Packaging Q'ty Specification 0D L Size Code 6.3 6.3 10 6.3 6.3 8 10 6.3 6.3 8 10 6.3 6.3 6.3 8 10 6.3 6.3 6.3 8 10 6.3 6.3 8 10 5.8 7.7 10.2 5.8 7.7 10.2 10.2 5.8 7.7 10.2 10.2 5.8 7.7 7.7 10.2 10.2 5.8 5.8 7.7 10.2 10.2 5.8 7.7 10.2 10.2 D D8 G D D8 F G D D8 F G D D8 D8 F G D D D8 F G D D8 F G Ripple ESR tan d current Part No. (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 240 0.36 0.26 EEEFK0J271SP 280 0.34 0.26 EEEFKJ471XSP 850 0.08 0.26 EEEFK0J182SP 240 0.36 0.19 EEEFK1A221SP 280 0.34 0.19 EEEFKA331XSP 600 0.16 0.19 EEEFK1A821SP 850 0.08 0.19 EEEFK1A122SP 240 0.36 0.16 EEEFK1C151SP 280 0.34 0.16 EEEFKC271XSP 600 0.16 0.16 EEEFK1C561SP 850 0.08 0.16 EEEFK1C102SP 240 0.36 0.14 EEEFK1E101SP 280 0.34 0.14 EEEFKE151XSP 280 0.34 0.14 EEEFKE181XSP 600 0.16 0.14 EEEFK1E391SP 850 0.08 0.14 EEEFK1E681SP 240 0.36 0.12 EEEFK1V680SP 240 0.36 0.12 EEEFK1V820SP 280 0.34 0.12 EEEFKV121XSP 600 0.16 0.12 EEEFK1V271SP 850 0.08 0.12 EEEFK1V471SP 165 0.88 0.10 EEEFK1H390SP 195 0.68 0.10 EEEFKH820XSP 350 0.34 0.10 EEEFK1H181SP 670 0.18 0.10 EEEFK1H271SP Reflow Taping (pcs) (5) (5) (6) (5) (5) (6) (6) (5) (5) (6) (6) (5) (5) (5) (6) (6) (5) (5) (5) (6) (6) (5) (5) (6) (6) 1000 900 500 1000 900 500 500 1000 900 500 500 1000 900 900 500 500 1000 1000 900 500 500 1000 900 500 500 If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V, 1H → H · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FT Type : V High temperature Lead-Free reflow Features ● Endurance : 105 °C 2000 h to 5000 h Low ESR (1 size smaller than series FK) ● Vibration-proof product is available upon request. (08 mm and larger) ● RoHS compliant ● Miniaturized, Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life Resistance to soldering heat AEC-Q200 –55 °C to +105 °C 6.3 V.DC to 50 V.DC 10 μF to 2200 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV After 2 minutes Please see the attached characteristics list After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. (Suffix “G” in 6.3 V.DC : 3000 hours, 10 V.DC to 50 V.DC : 5000 hours) Capacitance change Within ±30 % of the initial value (Suffix “G” is ±35 %) tan d < 200 % of the initial limit (Suffix “G” is < 300 %) DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Capacitance (μF) 10 to 560 to 470 2200 120 1k 10 k 100 k to 0.65 0.70 0.85 0.90 0.95 0.95 1.00 1.00 Capacitance (μF) 22 E FT L Series identification K A±0.2 (P) + W Pressure Relief (010 and larger) ( ) Reference size (Unit : mm) Rated voltage code Lot number R. Voltage 6.3 (V.DC) Code j H 0D±0.5 Negative polarity marking (–) – (I) 0.3 max. Example : 25 V.DC 22 μF Marking color : BLACK (I) Dimensions B±0.2 Marking 10 16 25 35 50 A C E V H Size H L A, B 0D code B 4.0 5.8±0.3 4.3 5.5 max. C 5.0 5.8±0.3 5.3 6.5 max. D 6.3 5.8±0.3 6.6 7.8 max. D8 6.3 7.7±0.3 6.6 7.8 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W P K 1.8 2.2 2.6 2.6 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 1.8 3.1 4.6 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.70±0.20 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Feb. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 2000 h Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (μF) 6.3 10 16 25 35 100 220 330 470 680 1500 2200 68 150 220 330 470 1000 1500 47 68 100 150 220 330 680 1000 22 33 47 68 100 150 220 470 820 22 33 47 68 100 150 330 560 10 50 22 47 100 220 330 ✽ 0D L Size code 4 5 6.3 6.3 6.3 8 10 4 5 6.3 6.3 6.3 8 10 4 5 5 6.3 6.3 6.3 8 10 4 4 5 5 6.3 6.3 6.3 8 10 4 5 5 6.3 6.3 6.3 8 10 4 5 5 6.3 6.3 8 10 5.8 5.8 5.8 7.7 7.7 10.2 10.2 5.8 5.8 5.8 7.7 7.7 10.2 10.2 5.8 5.8 5.8 5.8 5.8 7.7 10.2 10.2 5.8 5.8 5.8 5.8 5.8 7.7 7.7 10.2 10.2 5.8 5.8 5.8 5.8 5.8 7.7 10.2 10.2 5.8 5.8 5.8 5.8 7.7 10.2 10.2 B C D D8 D8 F G B C D D8 D8 F G B C C D D D8 F G B B C C D D8 D8 F G B C C D D D8 F G (B) C C D D8 F G Ripple ESR tan d current Part No. (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 160 0.85 0.26 EEEFT0J101AR 240 0.36 0.26 EEEFT0J221AR 300 0.26 0.26 EEEFT0J331AP 600 0.16 0.26 EEEFTJ471XAP 600 0.16 0.26 EEEFTJ681XAP 850 0.08 0.26 EEEFT0J152AP 1190 0.06 0.28 EEEFT0J222AP 160 0.85 0.19 EEEFT1A680AR 240 0.36 0.19 EEEFT1A151AR 300 0.26 0.19 EEEFT1A221AP 600 0.16 0.19 EEEFTA331XAP 600 0.16 0.19 EEEFTA471XAP 850 0.08 0.19 EEEFT1A102AP 1190 0.06 0.19 EEEFT1A152AP 160 0.85 0.16 EEEFT1C470AR 240 0.36 0.16 EEEFT1C680AR 240 0.36 0.16 EEEFT1C101AR 300 0.26 0.16 EEEFT1C151AP 300 0.26 0.16 EEEFT1C221AP 600 0.16 0.16 EEEFTC331XAP 850 0.08 0.16 EEEFT1C681AP 1190 0.06 0.16 EEEFT1C102AP 160 0.85 0.14 EEEFT1E220AR 160 0.85 0.14 EEEFT1E330AR 240 0.36 0.14 EEEFT1E470AR 240 0.36 0.14 EEEFT1E680AR 300 0.26 0.14 EEEFT1E101AP 600 0.16 0.14 EEEFTE151XAP 600 0.16 0.14 EEEFTE221XAP 850 0.08 0.14 EEEFT1E471AP 1190 0.06 0.14 EEEFT1E821AP 160 0.85 0.12 EEEFT1V220AR 240 0.36 0.12 EEEFT1V330AR 240 0.36 0.12 EEEFT1V470AR 300 0.26 0.12 EEEFT1V680AP 300 0.26 0.12 EEEFT1V101AP 600 0.16 0.12 EEEFTV151XAP 850 0.08 0.12 EEEFT1V331AP 1190 0.06 0.12 EEEFT1V561AP 85 2.30 0.10 EEEFTH100UAR 165 0.88 0.10 EEEFT1H100AR 165 0.88 0.10 EEEFT1H220AR 195 0.68 0.10 EEEFT1H470AP 350 0.34 0.10 EEEFTH101XAP 670 0.18 0.10 EEEFT1H221AP 900 0.12 0.10 EEEFT1H331AP Min. Packaging Q'ty Reflow (5) (5) (5) (5) (5) (6) (6) (5) (5) (5) (5) (5) (6) (6) (5) (5) (5) (5) (5) (5) (6) (6) (5) (5) (5) (5) (5) (5) (5) (6) (6) (5) (5) (5) (5) (5) (5) (6) (6) (5) (5) (5) (5) (5) (6) (6) Taping (pcs) 2000 1000 1000 900 900 500 500 2000 1000 1000 900 900 500 500 2000 1000 1000 1000 1000 900 500 500 2000 2000 1000 1000 1000 900 900 500 500 2000 1000 1000 1000 1000 900 500 500 2000 1000 1000 1000 900 500 500 ✽ Size code( ) : Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V, 1H → H · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Feb. 2016 NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FP Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Low ESR (30 % to 50 % less than FK series) ● Endurance : 105 °C 2000 h ● Vibration-proof product is available upon request. ● RoHS compliant (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –55 °C to +105 °C 6.3 V.DC to 50 V.DC 10 μF to 1800 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C)/Z(+20 °C) 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40°C)/Z(+20 °C) 3 3 3 3 3 3 Z(–55°C)/Z(+20 °C) 4 4 4 3 3 3 After applying rated working voltage at +105 °C ±2 °C for 2000 hours the capacitors shall meet the limits specified below. Post-test requirement at +20 °C Capacitance change Within ±30 % of the initial value < 200 % of the initial limit tan d DC leakege current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Capacitance (μF) 10 to 560 to 470 1800 120 1k 10 k 100 k to 0.65 0.75 0.85 0.90 0.95 0.95 1.00 1.00 Series identification (P) B±0.2 W Pressure Relief (010 and larger) Mark for Lead-Free products (Black dot) Rated voltage code Lot number R. Voltage 6.3 (V.DC) Code j + L Capacitance (μF) 22 j FP H 0D±0.5 Negative polarity marking (–) A±0.2 – K 0.3 max. Example : 6.3 V.DC 22 μF Marking color : BLACK 10 16 25 35 50 A C E V H Size L A, B 0D code B 4.0 5.8±0.30 4.3 C 5.0 5.8±0.30 5.3 D 6.3 5.8±0.30 6.6 D8 6.3 7.7±0.30 6.6 E 8.0 6.2±0.30 8.3 F 8.0 10.2±0.30 8.3 G 10.0 10.2±0.30 10.3 (I) Dimensions (I) Marking ( ) Reference size (Unit : mm) H I W 5.5 max. 6.5 max. 7.8 max. 7.8 max. 9.5 max. 10.0 max. 12.0 max. 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P K 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 2.2 0.35 +- 0.15 0.20 3.1 0.70±0.20 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (μF) 22 47 100 6.3 220 330 470 1000 1500 1800 22 33 150 10 220 330 470 680 1000 1200 10 22 47 68 16 100 150 220 330 470 680 820 10 22 33 47 68 25 100 150 220 330 470 560 Min. Packaging Q'ty Specification ✽ 0D L Size code 4 4 5 5 6.3 6.3 6.3 8 8 8 10 10 4 4 5 6.3 6.3 8 8 8 8 10 10 4 4 5 5 6.3 6.3 6.3 6.3 6.3 6.3 8 8 8 10 10 4 5 5 6.3 6.3 6.3 6.3 8 8 8 8 10 10 5.8 5.8 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 5.8 7.7 7.7 7.7 6.2 10.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 10.2 B (B) C (C) D D D8 E F F G (G) B (B) C D D8 E F F F G (G) B (B) C (C) D D D D8 D8 D8 E F F G (G) B C (C) D D D D8 E F F F G (G) Ripple ESR tan d current Part No. (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 160 0.85 0.26 EEEFP0J220AR 160 0.85 0.26 EEEFPJ470UAR 240 0.36 0.26 EEEFP0J470AR 240 0.36 0.26 EEEFPJ101UAR 300 0.26 0.26 EEEFP0J101AP 300 0.26 0.26 EEEFP0J221AP 600 0.16 0.26 EEEFPJ331XAP 500 0.18 0.26 EEEFP0J331AP 850 0.08 0.26 EEEFP0J471AP 850 0.08 0.26 EEEFP0J102AP 1190 0.06 0.26 EEEFP0J152AP 850 0.08 0.26 EEEFPJ182UAP 160 0.85 0.19 EEEFP1A220AR 160 0.85 0.19 EEEFPA330UAR 240 0.36 0.19 EEEFP1A330AR 300 0.26 0.19 EEEFP1A151AP 600 0.16 0.19 EEEFPA221XAP 500 0.18 0.19 EEEFP1A221AP 850 0.08 0.19 EEEFP1A331AP 850 0.08 0.19 EEEFP1A471AP 850 0.08 0.19 EEEFP1A681AP 1190 0.06 0.19 EEEFP1A102AP 850 0.08 0.19 EEEFPA122UAP 160 0.85 0.16 EEEFP1C100AR 160 0.85 0.16 EEEFPC220UAR 240 0.36 0.16 EEEFP1C220AR 240 0.36 0.16 EEEFPC470UAR 300 0.26 0.16 EEEFP1C470AP 300 0.26 0.16 EEEFP1C680AP 300 0.26 0.16 EEEFP1C101AP 600 0.16 0.16 EEEFPC101XAP 600 0.16 0.16 EEEFPC151XAP 600 0.16 0.16 EEEFPC221XAP 500 0.18 0.16 EEEFP1C221AP 850 0.08 0.16 EEEFP1C331AP 850 0.08 0.16 EEEFP1C471AP 1190 0.06 0.16 EEEFP1C681AP 850 0.08 0.16 EEEFPC821UAP 160 0.85 0.14 EEEFP1E100AR 240 0.36 0.14 EEEFP1E220AR 240 0.36 0.14 EEEFPE330UAR 300 0.26 0.14 EEEFP1E330AP 300 0.26 0.14 EEEFP1E470AP 300 0.26 0.14 EEEFP1E680AP 600 0.16 0.14 EEEFPE101XAP 500 0.18 0.14 EEEFP1E101AP 850 0.08 0.14 EEEFP1E151AP 850 0.08 0.14 EEEFP1E221AP 850 0.08 0.14 EEEFP1E331AP 1190 0.06 0.14 EEEFP1E471AP 850 0.08 0.14 EEEFPE561UAP Reflow Taping (pcs) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (6) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (6) 2000 2000 1000 1000 1000 1000 900 1000 500 500 500 500 2000 2000 1000 1000 900 1000 500 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 900 900 900 1000 500 500 500 500 2000 1000 1000 1000 1000 1000 900 1000 500 500 500 500 500 ✽ Size code( ) : Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 2000 h Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (μF) 10 22 33 47 68 35 50 100 150 220 330 390 100 220 ✽ 0D L Size code 4 5 6.3 6.3 6.3 6.3 8 8 8 10 10 8 10 5.8 5.8 5.8 5.8 7.7 7.7 10.2 10.2 10.2 10.2 10.2 10.2 10.2 (B) C D D D8 D8 F F F G (G) F G Ripple ESR tan d current Part No. (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 160 0.85 0.12 EEEFPV100UAR 240 0.36 0.12 EEEFP1V220AR 300 0.26 0.12 EEEFP1V330AP 300 0.26 0.12 EEEFP1V470AP 600 0.16 0.12 EEEFPV680XAP 600 0.16 0.12 EEEFPV101XAP 850 0.08 0.12 EEEFP1V101AP 850 0.08 0.12 EEEFP1V151AP 850 0.08 0.12 EEEFP1V221AP 1190 0.06 0.12 EEEFP1V331AP 850 0.08 0.12 EEEFPV391UAP 670 0.18 0.10 EEEFP1H101AP 900 0.12 0.10 EEEFP1H221AP Min. Packaging Q'ty Reflow Taping (pcs) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (6) (6) 2000 1000 1000 1000 900 900 500 500 500 500 500 500 500 ✽ Size code( ) : Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : TG Type : V Features ● Endurance : 125 °C 1000 h to 2000 h ● Miniaturization (40 % less than TA Series) ● Low ESR (Low temp) ● Vibration-proof product is available upon request. (08 mm and larger) ● RoHS compliant (Parts No 08 to 010 : EEE✽, 012.5 to 018 : EEV✽) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +125 °C 10 V.DC to 100 V.DC 10 µF to 4700 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV After 2 minutes Please see the attached characteristics list V.DC 10 16 25 35 50 63 80 100 Z(–25 °C)/Z(+20 °C) 3 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 6 4 4 3 3 3 3 3 After applying rated working voltage for 1000 hours (08×6.2), 2000 hours (08×10.2 <) at +125 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value (code U : ±35 %) < 300 % of the initial limit (code U : ±350 %) tan d DC leakage current Within the initial limit After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.65 Marking 1k 0.85 10 k 0.95 100 k to 1.00 Dimensions (P) + (I) L Pressure Relief (010 and larger) Rated Voltage code Lot number B±0.2 Series identification Mark for Lead-Free products (Black dot) H 100 A TG 0D±0.5 Negative polarity marking (–) A±0.2 – K 0.3 max. Capacitance (µF) (I) Example : 10 V.DC 100 µF, 10 V.DC 1000 µF Marking color : BLACK Lead-Free products (< 010) W ( ) Reference size Lead-Free products (> 012.5) Capacitance (µF) Negative polarity marking (–) 1000 A TG Rated Voltage code Lot number R. Voltage 10 (V.DC) Code A (Unit : mm) Series identification 16 25 35 50 63 C E V H J 80 100 K 2A Size code E F G H13 J16 K16 0D L A, B H I W P K 8.0 8.0 10.0 12.5 16.0 18.0 6.2±0.3 10.2±0.3 10.2±0.3 13.5±0.5 16.5±0.5 16.5±0.5 8.3 8.3 10.3 13.5 17.0 19.0 9.5 max. 10.0 max. 12.0 max. 15.0 max. 19.0 max. 21.0 max. 3.4 3.4 3.5 4.7 5.5 6.7 0.65±0.1 0.90±0.2 0.90±0.2 0.90±0.3 1.20±0.3 1.20±0.3 2.2 3.1 4.6 4.4 6.7 6.7 0.35 +- 0.15 0.20 0.70±0.20 0.70±0.20 0.70±0.30 0.70±0.30 0.70±0.30 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 125 °C 1000 h (08×10.2 < : 2000 h) Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 100 220 330 10 470 1000 1500 2200 3300 4700 100 220 330 16 470 680 1000 2200 3300 47 100 220 25 330 470 680 1000 2200 33 47 100 35 220 330 470 680 1000 ✽ 0D L Size code 8 8 8 8 10 10 12.5 12.5 16 16 18 18 8 8 10 10 12.5 12.5 12.5 12.5 16 16 18 18 8 8 8 8 10 10 12.5 12.5 12.5 16 16 18 18 8 8 8 8 10 10 12.5 12.5 16 16 18 18 6.2 6.2 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 16.5 16.5 10.2 10.2 10.2 10.2 13.5 13.5 13.5 13.5 16.5 16.5 16.5 16.5 6.2 6.2 10.2 10.2 10.2 10.2 13.5 13.5 13.5 16.5 16.5 16.5 16.5 6.2 6.2 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 16.5 16.5 E (E) F (F) G (G) H13 (H13) J16 (J16) K16 K16 F (F) G (G) H13 H13 H13 (H13) J16 (J16) K16 K16 E (E) F (F) G (G) H13 H13 (H13) J16 (J16) K16 K16 E (E) F (F) G (G) H13 (H13) J16 (J16) K16 K16 Ripple ESR tan d current Part No. (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+125 °C) (Ω) (mA r.m.s.) 100 1.00 0.30 EEETG1A101P 100 1.00 0.30 EEETG1A221UP 197 0.50 0.30 EEETG1A221P 197 0.50 0.30 EEETG1A331UP 270 0.30 0.30 EEETG1A331P 270 0.30 0.30 EEETG1A471UP 800 0.12 0.30 EEVTG1A102Q 800 0.12 0.30 EEVTG1A152UQ 1100 0.08 0.32 EEVTG1A222M 1100 0.08 0.34 EEVTG1A332UM 1300 0.075 0.34 EEVTG1A332M 1300 0.075 0.36 EEVTG1A472M 197 0.50 0.23 EEETG1C101P 197 0.50 0.23 EEETG1C221UP 270 0.30 0.23 EEETG1C221P 270 0.30 0.23 EEETG1C331UP 800 0.12 0.23 EEVTG1C331Q 800 0.12 0.23 EEVTG1C471Q 800 0.12 0.23 EEVTG1C681Q 800 0.12 0.23 EEVTG1C102UQ 1100 0.08 0.23 EEVTG1C102M 1100 0.08 0.25 EEVTG1C222UM 1300 0.075 0.25 EEVTG1C222M 1300 0.075 0.27 EEVTG1C332M 100 1.00 0.18 EEETG1E470P 100 1.00 0.18 EEETG1E101UP 197 0.50 0.18 EEETG1E101P 197 0.50 0.18 EEETG1E221UP 270 0.30 0.18 EEETG1E221P EEETG1E331UP 270 0.30 0.18 800 0.12 0.18 EEVTG1E331Q 800 0.12 0.18 EEVTG1E471Q 800 0.12 0.18 EEVTG1E681UQ 1100 0.08 0.18 EEVTG1E681M 1100 0.08 0.18 EEVTG1E102UM 1300 0.075 0.18 EEVTG1E102M 1300 0.075 0.20 EEVTG1E222M 100 1.00 0.16 EEETG1V330P 100 1.00 0.16 EEETG1V470UP 197 0.50 0.16 EEETG1V470P 197 0.50 0.16 EEETG1V101UP 270 0.30 0.16 EEETG1V101P 270 0.30 0.16 EEETG1V221UP 800 0.12 0.16 EEVTG1V331Q 800 0.12 0.16 EEVTG1V471UQ 1100 0.08 0.16 EEVTG1V471M 1100 0.08 0.16 EEVTG1V681UM 1300 0.075 0.16 EEVTG1V681M 0.075 0.16 EEVTG1V102M 1300 Min. Packaging Q'ty Reflow Taping (pcs) (2) (2) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) (3) (3) (2) (2) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) (3) (2) (2) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) 1000 1000 500 500 500 500 200 200 125 125 125 125 500 500 500 500 200 200 200 200 125 125 125 125 1000 1000 500 500 500 500 200 200 200 125 125 125 125 1000 1000 500 500 500 500 200 200 125 125 125 125 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P”, “Q”, or “M” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 125 °C 1000 h (08×10.2 < : 2000 h) Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 10 22 33 47 50 100 220 330 470 680 1000 10 22 33 63 47 100 220 330 470 10 22 33 47 80 100 220 330 470 10 22 100 33 47 100 220 330 Min. Packaging Q'ty Specification ✽ 0D L Size code 8 8 8 8 8 10 10 12.5 12.5 16 16 18 18 8 8 8 10 8 10 10 12.5 12.5 16 16 8 8 10 8 10 10 12.5 12.5 16 16 18 16 18 18 8 8 10 10 12.5 16 18 18 6.2 6.2 6.2 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 16.5 16.5 6.2 10.2 10.2 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 10.2 10.2 10.2 10.2 10.2 10.2 13.5 13.5 16.5 16.5 16.5 16.5 16.5 16.5 10.2 10.2 10.2 10.2 13.5 16.5 16.5 16.5 E E (E) F (F) G (G) H13 H13 J16 (J16) K16 K16 E F (F) G (F) G (G) H13 H13 J16 J16 F (F) G (F) G (G) H13 (H13) J16 (J16) K16 (J16) K16 K16 F (F) G G H13 J16 K16 K16 Ripple ESR tan d current Part No. (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+125 °C) (Ω) (mA r.m.s.) 80 1.60 0.14 EEETG1H100P 80 1.60 0.14 EEETG1H220P 80 1.60 0.14 EEETG1H330UP 133 0.75 0.14 EEETG1H330P 133 0.75 0.14 EEETG1H470UP 221 0.50 0.14 EEETG1H470P 221 0.50 0.14 EEETG1H101UP 600 0.23 0.14 EEVTG1H221Q 600 0.23 0.14 EEVTG1H331Q 900 0.15 0.14 EEVTG1H471M 900 0.15 0.14 EEVTG1H681UM 950 0.14 0.14 EEVTG1H681M 950 0.14 0.14 EEVTG1H102M 55 2.20 0.12 EEETG1J100P 100 1.00 0.12 EEETG1J220P 100 1.00 0.12 EEETG1J330UP 150 0.80 0.12 EEETG1J330P 100 1.00 0.12 EEETG1J470UP 150 0.80 0.12 EEETG1J470P 150 0.80 0.12 EEETG1J101UP 350 0.26 0.12 EEVTG1J101Q 350 0.26 0.12 EEVTG1J221Q 500 0.18 0.12 EEVTG1J331M 500 0.18 0.12 EEVTG1J471M 70 1.30 0.12 EEETG1K100P 70 1.30 0.12 EEETG1K220UP 90 1.00 0.12 EEETG1K220P 70 1.30 0.12 EEETG1K330UP 90 1.00 0.12 EEETG1K330P 90 1.00 0.12 EEETG1K470UP 250 0.42 0.12 EEVTG1K470Q 250 0.42 0.12 EEVTG1K101UQ 350 0.30 0.12 EEVTG1K101M 350 0.30 0.12 EEVTG1K221UM 400 0.28 0.12 EEVTG1K221M 350 0.30 0.12 EEVTG1K331UM 400 0.28 0.12 EEVTG1K331M 400 0.28 0.12 EEVTG1K471M 70 1.30 0.10 EEETG2A100P 70 1.30 0.10 EEETG2A220UP 90 1.00 0.10 EEETG2A220P 90 1.00 0.10 EEETG2A330P 250 0.42 0.10 EEVTG2A470Q 350 0.30 0.10 EEVTG2A101M 400 0.28 0.10 EEVTG2A221M 400 0.28 0.10 EEVTG2A331M Reflow Taping (pcs) (2) (2) (2) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) (2) (2) (2) (2) (2) (2) (2) (3) (3) (3) (3) (2) (2) (2) (2) (2) (2) (3) (3) (3) (3) (3) (3) (3) (3) (2) (2) (2) (2) (3) (3) (3) (3) 1000 1000 1000 500 500 500 500 200 200 125 125 125 125 1000 500 500 500 500 500 500 200 200 125 125 500 500 500 500 500 500 200 200 125 125 125 125 125 125 500 500 500 500 200 125 125 125 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P”, “Q”, or “M” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : Medium-size TK Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 125 °C 2000 h product is available upon request. ● RoHS compliant ● Vibration-proof Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +125 °C 10 V.DC to 100 V.DC 47 µF to 4700 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV After 2 minutes Please see the attached characteristics list V.DC 10 16 25 35 50 63 80 100 Z(–25 °C)/Z(+20 °C) 3 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 6 4 4 3 3 3 3 3 After applying rated working voltage for 2000 hours at +125 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value (Miniaturization product : Within ±35 %) < 300 % of the initial limit (Miniaturization product : Within 350 %) tan d DC leakage current Within the initial limit After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.75 Marking 1k 0.90 10 k 0.95 100 k to 1.00 Dimensions L Pressure Relief + (P) (I) Series identification Mark for Lead-Free products (Black dot) A±0.2 B±0.2 Capacitance (µF) 1000 A TK H 0D±0.5 Negative polarity marking (–) – K 0.3 max. (I) Example : 10 V.DC 1000 µF Marking color : BLACK W ( ) Reference size Rated voltage code (Unit : mm) Lot number R. Voltage 10 (V.DC) Code A 16 25 35 50 63 C E V H J 80 100 K 2A Size L A, B H I 0D code H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 W P K 0.90±0.3 1.20±0.3 1.20±0.3 4.4 6.7 6.7 0.70±0.3 0.70±0.3 0.70±0.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 125 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 10 1000 1500 2200 3300 4700 330 470 680 16 1000 2200 3300 330 470 25 680 1000 2200 330 470 35 680 50 1000 220 330 470 680 63 1000 100 220 330 470 47 100 80 220 330 100 470 47 100 220 330 0D L 12.5 12.5 16 16 18 18 12.5 12.5 12.5 12.5 16 16 18 18 12.5 12.5 12.5 16 16 18 18 12.5 12.5 16 16 18 18 12.5 12.5 16 16 18 18 12.5 12.5 16 16 12.5 12.5 16 16 18 16 18 18 12.5 16 18 18 13.5 13.5 16.5 16.5 16.5 16.5 13.5 13.5 13.5 13.5 16.5 16.5 16.5 16.5 13.5 13.5 13.5 16.5 16.5 16.5 16.5 13.5 13.5 16.5 16.5 16.5 16.5 13.5 13.5 16.5 16.5 16.5 16.5 13.5 13.5 16.5 16.5 13.5 13.5 16.5 16.5 16.5 16.5 16.5 16.5 13.5 16.5 16.5 16.5 Min. Packaging Q'ty Specification Ripple ✽ Size current code (100 kHz) (+125 °C) (mA r.m.s.) H13 800 (H13) 800 J16 1100 (J16) 1100 K16 1300 K16 1300 H13 800 H13 800 H13 800 (H13) 800 J16 1100 (J16) 1100 K16 1300 K16 1300 H13 800 H13 800 (H13) 800 J16 1100 (J16) 1100 K16 1300 K16 1300 H13 800 (H13) 800 J16 1100 (J16) 1100 K16 1300 K16 1300 H13 600 H13 600 J16 900 (J16) 900 K16 950 K16 950 H13 350 H13 350 J16 500 J16 500 H13 250 (H13) 250 J16 350 (J16) 350 K16 400 (J16) 350 K16 400 K16 400 H13 250 J16 350 K16 400 K16 400 ESR (100 kHz) (Ω) +20 °C 0.120 0.120 0.080 0.080 0.075 0.075 0.120 0.120 0.120 0.120 0.080 0.080 0.075 0.075 0.120 0.120 0.120 0.080 0.080 0.075 0.075 0.120 0.120 0.080 0.080 0.075 0.075 0.230 0.230 0.150 0.150 0.140 0.140 0.260 0.260 0.180 0.180 0.420 0.420 0.300 0.300 0.280 0.300 0.280 0.280 0.420 0.300 0.280 0.280 –40 °C 1.80 1.80 1.20 1.20 1.10 1.10 1.80 1.80 1.80 1.80 1.20 1.20 1.10 1.10 1.80 1.80 1.80 1.20 1.20 1.10 1.10 1.80 1.80 1.20 1.20 1.10 1.10 3.40 3.40 2.20 2.20 2.10 2.10 5.20 5.20 3.60 3.60 8.40 8.40 6.00 6.00 5.60 6.00 5.60 5.60 8.40 6.00 5.60 5.60 tan d (120 Hz) (+20 °C) 0.30 0.30 0.32 0.34 0.36 0.38 0.23 0.23 0.23 0.23 0.25 0.27 0.27 0.29 0.18 0.18 0.18 0.18 0.18 0.18 0.20 0.16 0.16 0.16 0.16 0.16 0.16 0.14 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 Part No. Reflow Taping (pcs) EEETK1A102AQ EEETKA152UAQ EEETK1A222AM EEETKA332UAM EEETK1A332AM EEETK1A472AM EEETK1C331AQ EEETK1C471AQ EEETK1C681AQ EEETKC102UAQ EEETK1C102AM EEETKC222UAM EEETK1C222AM EEETK1C332AM EEETK1E331AQ EEETK1E471AQ EEETKE681UAQ EEETK1E681AM EEETKE102UAM EEETK1E102AM EEETK1E222AM EEETK1V331AQ EEETKV471UAQ EEETK1V471AM EEETKV681UAM EEETK1V681AM EEETK1V102AM EEETK1H221AQ EEETK1H331AQ EEETK1H471AM EEETKH681UAM EEETK1H681AM EEETK1H102AM EEETK1J101AQ EEETK1J221AQ EEETK1J331AM EEETK1J471AM EEETK1K470AQ EEETKK101UAQ EEETK1K101AM EEETKK221UAM EEETK1K221AM EEETKK331UAM EEETK1K331AM EEETK1K471AM EEETK2A470AQ EEETK2A101AM EEETK2A221AM EEETK2A331AM (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (10) (10) (10) (10) (10) (10) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) 200 200 125 125 125 125 200 200 200 200 125 125 125 125 200 200 200 125 125 125 125 200 200 125 125 125 125 200 200 125 125 125 125 200 200 125 125 200 200 125 125 125 125 125 125 200 125 125 125 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “Q” or “M” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : TK Type : V Features ● Endurance : 125 °C 3000 h ● Low ESR at –40 °C (50 % lower than TG series) ● Added ESR specification after the endurance test ● Vibration-proof product is available upon request. ● RoHS compliant Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life ESR after the life test AEC-Q200 –40 °C to +125 °C 10 V.DC to 35 V.DC 47 µF to 470 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV After 2 minutes Please see the attached characteristics list V.DC 10 16 25 35 Z(–25 °C)/Z(+20 °C) 3 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 4 3 3 3 After the life test with DC rated woking voltage at +125 °C ±2 °C for 3000 hours, the capacitors shall meet the limits specified below. Capacitance change Within ±30 % of the initial value (code U : ±35 %) < 300 % of the initial limit (code U : ±350 %) tan d DC leakage current Within the initial limit After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours, ESR value shall meet the specified below. < 150 % of the initial limit 20 °C After 1000 hours < 200 % of the initial limit –40 °C 20 °C < 300 % of the initial limit After 2000 hours < 400 % of the initial limit –40 °C 20 °C < 1000 % of the initial limit After 3000 hours < 1500 % of the initial limit –40 °C AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.65 100 k to 1.00 Lot number Series identification L Pressure Relief (010 and larger) Mark for Lead-Free products (Black dot) A±0.2 + (P) (I) 220 A TK H 0D±0.5 Capacitance (µF) – K 0.3 max. Negative polarity marking (–) (I) Dimensions Example : 10 V.DC 220 µF Marking color : BLACK R. Voltage (V.DC) Code 10 k 0.95 B±0.2 Marking 1k 0.85 W ( ) Reference size Rated voltage code (Unit : mm) 10 16 25 35 A C E V Size L A, B H I 0D code F 8.0 10.2±0.3 8.3 10.0 max. 3.4 G 10.0 10.2±0.3 10.3 12.0 max. 3.5 W P K 0.90±0.2 0.90±0.2 3.1 4.6 0.70±0.2 0.70±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 125 °C 3000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 220 10 330 470 100 16 220 330 100 25 220 330 47 35 100 220 0D L 8 8 10 10 8 8 10 10 8 8 10 10 8 8 10 10 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 Min. Packaging Q'ty Specification Ripple ✽ ESR Size current tan d Part No. (100 kHz) code (100 kHz) (120 Hz) (Ω) (+125 °C) (+20 °C) (mA r.m.s.) +20 °C –40 °C F 197 0.3 5 0.30 EEETK1A221P (F) 197 0.3 5 0.30 EEETK1A331UP G 270 0.2 3 0.30 EEETK1A331P (G) 270 0.2 3 0.30 EEETK1A471UP F 197 0.3 5 0.23 EEETK1C101P (F) 197 0.3 5 0.23 EEETK1C221UP G 270 0.2 3 0.23 EEETK1C221P (G) 270 0.2 3 0.23 EEETK1C331UP F 197 0.3 5 0.18 EEETK1E101P (F) 197 0.3 5 0.18 EEETK1E221UP G 270 0.2 3 0.18 EEETK1E221P (G) 270 0.2 3 0.18 EEETK1E331UP F 197 0.3 5 0.16 EEETK1V470P (F) 197 0.3 5 0.16 EEETK1V101UP G 270 0.2 3 0.16 EEETK1V101P (G) 270 0.2 3 0.16 EEETK1V221UP Reflow Taping (pcs) (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) (8) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : TP Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Lower ESR at Low temperature after endurance ● Endurance : 125 °C 3000 h (D8 size : 2000 h) ● Automotive ● Vibration-proof product is available upon request. ● RoHS compliant (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +125 °C 10 V.DC to 35 V.DC 47 µF to 470 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV (µA) After 2 minutes Please see the attached characteristics list After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours (D8 size : 2000 h). the capacitors shall meet the limits specified below. Capacitance change Within ±30 % of the initial value < 300 % of the initial limit tan d DC leakage current Within the initial limit Size Code ESR after D8 F G endurance Initial (+20 °C) 0.45 0.2 0.15 (Ω/100kHz) After 2000 h (-40 °C) 40 4.5 3.5 After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.65 100 k to 1.00 0.3 max. + L (I) Series identification Mark for Lead-Free products (Black dot) (P) B±0.2 Capacitance (µF) 220 A TP H 0D±0.5 Negative polarity marking (–) A±0.2 – (I) Dimensions Example : 10 V.DC 220 µF Marking color : BLACK W Pressure Relief (010 and larger) ( ) Reference size (Unit : mm) Rated voltage code Lot number R. Voltage (V.DC) Code 10 k 0.95 K Marking 1k 0.85 10 16 25 35 A C E V Size code D8 F G 0D L A, B H I 6.3 7.7±0.3 6.6 7.8 max. 2.6 8.0 10.2±0.3 8.3 10.0max. 3.4 10.0 10.2±0.3 10.3 12.0max. 3.5 W 0.65±0.1 0.90±0.2 0.90±0.2 P K 1.8 0.35 +- 0.15 0.20 3.1 0.70±0.20 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 125 °C 3000 h (06.3×7.7 : 2000 h) Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 220 10 330 470 100 16 25 L 8 10.2 Ripple ✽ ESR Size current tan d Part No. (100 kHz) code (100 kHz) (120 Hz) (Ω) (+125 °C) (+20 °C) (mA r.m.s.) +20 °C –40 °C F 270 0.20 3 0.30 EEETP1A221AP Reflow Taping (pcs) (8) 500 8 10.2 (F) 270 0.20 3 0.30 EEETPA331UAP (8) 500 10 10.2 G 500 0.15 2 0.30 EEETP1A331AP (8) 500 10 10.2 G 500 0.15 2 0.30 EEETP1A471AP (8) 500 7.7 D8 197 0.45 5 0.23 EEETPC101XAP (8) 900 F 270 0.20 3 0.23 EEETP1C101AP (8) 500 6.3 8 10.2 220 8 10.2 F 270 0.20 3 0.23 EEETP1C221AP (8) 500 330 10 10.2 G 500 0.15 2 0.23 EEETP1C331AP (8) 500 470 10 10.2 G 500 0.15 2 0.23 EEETP1C471AP (8) 500 500 100 8 10.2 F 270 0.20 3 0.18 EEETP1E101AP (8) 220 10 10.2 G 500 0.15 2 0.18 EEETP1E221AP (8) 500 330 10 10.2 G 500 0.15 2 0.18 EEETP1E331AP (8) 500 7.7 D8 197 0.45 5 0.16 EEETPV470XAP (8) 900 F 270 0.20 3 0.16 EEETP1V470AP (8) 500 47 35 0D Min. Packaging Q'ty 6.3 8 10.2 100 8 10.2 F 270 0.20 3 0.16 EEETP1V101AP (8) 500 220 10 10.2 G 500 0.15 2 0.16 EEETP1V221AP (8) 500 ✽ Size code( ) : Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 NEW Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 125 °C 3000 h (D8 size : 2000 h) Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 10 L 220 8 10.2 330 10 10.2 470 10 10.2 G 750 0.15 7.7 D8 300 0.45 100 16 25 G 750 0.15 Reflow Taping (pcs) (8) 500 0.30 EEETC1A331P (8) 500 2 0.30 EEETC1A471P (8) 500 5 0.23 EEETC1C101XP (8) 900 2 8 10.2 F 410 0.20 3 0.23 EEETC1C101P (8) 500 220 8 10.2 F 410 0.20 3 0.23 EEETC1C221P (8) 500 330 10 10.2 G 750 0.15 2 0.23 EEETC1C331P (8) 500 470 10 10.2 G 750 0.15 2 0.23 EEETC1C471P (8) 500 100 8 10.2 F 410 0.20 3 0.18 EEETC1E101P (8) 500 220 10 10.2 G 750 0.15 2 0.18 EEETC1E221P (8) 500 330 10 10.2 G 750 0.15 2 0.18 EEETC1E331P (8) 500 7.7 D8 300 0.45 5 0.16 EEETC1V470XP (8) 900 47 35 Ripple ESR Size Current tan d (100 kHz) Part No. code (100 kHz) (120 Hz) (Ω) (+20 °C) (+125 °C) (mA r.m.s.) +20 °C –40 °C F 410 0.20 3 0.30 EEETC1A221P 0D 6.3 Min. Packaging Q'ty Specification 6.3 8 10.2 F 410 0.20 3 0.16 EEETC1V470P (8) 500 100 8 10.2 F 410 0.20 3 0.16 EEETC1V101P (8) 500 220 10 10.2 G 750 0.15 2 0.16 EEETC1V221P (8) 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 NEW Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 125 °C 3000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 10 16 25 35 0D L Specification Min. Packaging Q'ty Ripple ESR Size tan d current (100 kHz) code (100 kHz) (120 Hz) (Ω) (+20 °C) (+125 °C) (mA r.m.s.) +20 °C –40 °C Part No. Reflow Taping (pcs) 330 8 10.2 F 410 0.20 3 0.30 EEETC1A331UP (8) 500 470 8 10.2 F 410 0.20 3 0.30 EEETC1A471UP (8) 500 560 8 10.2 F 410 0.20 3 0.30 EEETC1A561UP (8) 500 680 10 10.2 G 750 0.15 2 0.30 EEETC1A681UP (8) 500 330 8 10.2 F 410 0.20 3 0.23 EEETC1C331UP (8) 500 390 8 10.2 F 410 0.20 3 0.23 EEETC1C391UP (8) 500 680 10 10.2 G 750 0.15 2 0.23 EEETC1C681UP (8) 500 220 8 10.2 F 410 0.20 3 0.18 EEETC1E221UP (8) 500 330 8 10.2 F 410 0.20 3 0.18 EEETC1E331UP (8) 500 470 10 10.2 G 750 0.15 2 0.18 EEETC1E471UP (8) 500 220 8 10.2 F 410 0.20 3 0.16 EEETC1V221UP (8) 500 330 10 10.2 G 750 0.15 2 0.16 EEETC1V331UP (8) 500 390 10 10.2 G 750 0.15 2 0.16 EEETC1V391UP (8) 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : TQ Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● 1 size smaller and same performance compare with V-TK series ● Low ESR (85 % low ESR in low temperature after endurance compare ● Endurance : 125 °C 2000 h ● RoHS compliant with V-TP series) Recommended applications ● Automotive Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +125 °C 35 V.DC 47 µF to 100 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV (µA) After 2 minutes Please see the attached characteristics list After the life test with DC rated working voltage at +125 °C±2 °C for 2000 hours, the capacitors shall meet the limits specified below. Capacitance change Within ±30 % of the initial value < 300 % of the initial limit tan d DC leakage current Within the initial limit Size Code ESR after D8 endurance Initial (+20 °C) 0.30 (Ω/100kHz) After 2000 h (-40 °C) 6 After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.65 10 k 0.95 100 k to 1.00 0.3 max. – (P) + L Lot number A±0.2 B±0.2 Series identification H Capacitance (µF) 47 V TQ 0D±0.5 Negative polarity marking (–) (I) Example : 35 V.DC 47 µF Marking color : BLACK (I) Dimensions K Marking 1k 0.85 W Rated Voltage code ( ) Reference size (Unit : mm) R. Voltage (V.DC) Code 35 V Size 0D code D8 6.3 L A, B 7.7±0.3 6.6 H I 7.8 max. 2.6 W P K 0.65±0.1 1.8 0.35 +- 0.15 0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 125 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 35 47 100 Specification 0D L Size code 6.3 6.3 7.7 7.7 D8 D8 Ripple current (100 kHz) (+125 °C) (mA r.m.s.) 197 197 Min. Packaging Q'ty ESR (100 kHz) (+20 °C) (Ω) tan d (120 Hz) (+20 °C) 0.30 0.30 0.16 0.16 Part No. Reflow Taping (pcs) EEETQV470XAP EEETQV101XAP (5) (5) 900 900 If Part number exceeds 12 digits, voltage code is abbreviated as follows; 1V → V · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : EB (Large Can Size) Type : V Features ● Endurance ● RoHS : 105 °C 3000 h to 5000 h compliant Specifications Category temperature range –25 °C to +105 °C Rated voltage range 160 V.DC to 450 V.DC Capacitance range 2.2 µF to 100 µF Capacitance tolerance ±20 % (120 Hz/+20 °C) Leakage current I < 0.06 CV +10 (µA) After 2 minutes Dissipation factor (tan d) Please see the attached characteristics list V.DC 160 200 250 350 400 450 Characteristics (Impedance ratio at 120 Hz) at low temperature Z(–25 °C) / Z(+20 °C) 2 2 3 5 6 6 After the life test with DC rated working voltage at +105 °C±2 °C for 5000 hours, the capacitors shall meet the limits specified below. (Size code G13 : 3000 hours, G17 : 4000 hours) Capacitance change Within ±20 % of the initial value Endurance tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized Shelf life at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Resistance to soldering heat tan d Within the initial limit DC leakage current Within the initial limit Frequency correction factor for ripple current Frequency (Hz) Rated Voltage (V.DC) 160 to 250 350 to 450 120 1k 10 k < f < 30 k 30 k < f < 100 k 0.55 0.50 0.85 0.80 0.90 0.90 1.00 1.00 Capacitance (µF) 10 2C EB K W ( ) Reference size (Unit : mm) Rated voltage code Lot number R. Voltage 160 (V.DC) Code 2C + L Pressure Relief Series identification A±0.2 B±0.2 Negative polarity marking (–) – H 0D±0.5 0.3 max. (P) Example : 160 V.DC 10 µF Marking color : BLACK (I) Dimensions (I) Marking 200 250 350 400 450 2D 2E 2V 2G 2W Size code G13 G17 H16 J16 J21 K16 K21 0D L 10.0 10.0 12.5 16.0 16.0 18.0 18.0 13.5±0.5 16.5±0.5 16.5±0.5 16.5±0.5 21.5±0.5 16.5±0.5 21.5±0.5 A,B H 10.3 12.0 10.3 12.0 13.5 15.0 17.0 19.0 17.0 19.0 19.0 21.0 19.0 21.0 max. max. max. max. max. max. max. I W P K 3.5 3.5 4.7 5.5 5.5 6.7 6.7 0.9±0.2 0.9±0.2 0.9±0.2 1.2±0.3 1.2±0.3 1.2±0.3 1.2±0.3 4.6 4.6 4.4 6.7 6.7 6.7 6.7 0.70±0.20 0.70±0.20 0.70±0.30 0.70±0.30 0.70±0.30 0.70±0.30 0.70±0.30 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 5000 h (G13 : 3000 h, G17 : 4000 h) Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 10 160 250 400 13.5 G13 Reflow Taping (4) 250 12.5 16.5 H16 470 0.15 5000 EEVEB2C330SQ (4) 150 16 16.5 J16 600 0.15 5000 EEVEB2C470SM (4) 125 16 21.5 J21 750 0.15 5000 EEVEB2C680M (4) 75 18 16.5 K16 750 0.15 5000 EEVEB2C680SM (4) 125 100 18 21.5 K21 1060 0.15 5000 EEVEB2C101M (4) 75 10 10 16.5 G17 80 0.15 4000 EEVEB2D100Q (4) 200 22 12.5 16.5 H16 470 0.15 5000 EEVEB2D220SQ (4) 150 33 16 16.5 J16 600 0.15 5000 EEVEB2D330SM (4) 125 47 18 16.5 K16 600 0.15 5000 EEVEB2D470SM (4) 125 68 16 21.5 J21 750 0.15 5000 EEVEB2D680M (4) 75 100 18 21.5 K21 1060 0.15 5000 EEVEB2D101M (4) 75 10 10 16.5 G17 88 0.15 4000 EEVEB2E100Q (4) 200 22 16 16.5 J16 560 0.15 5000 EEVEB2E220SM (4) 125 33 18 16.5 K16 560 0.15 5000 EEVEB2E330SM (4) 125 47 16 21.5 J21 710 0.15 5000 EEVEB2E470M (4) 75 18 21.5 K21 990 0.15 5000 EEVEB2E680M (4) 75 3.3 10 13.5 G13 38 0.20 3000 EEVEB2V3R3Q (4) 250 4.7 10 16.5 G17 50 0.20 4000 EEVEB2V4R7Q (4) 200 10 16 16.5 J16 270 0.20 5000 EEVEB2V100SM (4) 125 22 18 16.5 K16 350 0.20 5000 EEVEB2V220SM (4) 125 33 16 21.5 J21 480 0.20 5000 EEVEB2V330M (4) 75 47 18 21.5 K21 670 0.20 5000 EEVEB2V470M (4) 75 3.3 10 13.5 G13 40 0.24 3000 EEVEB2G3R3Q (4) 250 4.7 10 16.5 G17 50 0.24 4000 EEVEB2G4R7Q (4) 200 10 16 16.5 J16 250 0.24 5000 EEVEB2G100SM (4) 125 22 16 21.5 J21 410 0.24 5000 EEVEB2G220M (4) 75 33 450 Size code 47 68 350 10 L Min. Packaging Q'ty 33 68 200 0D Specification Ripple tan d current Part No. Endurance (100 kHz) (120 Hz) (hours) (+105 °C) (+20 °C) (mA r.m.s.) 70 0.15 3000 EEVEB2C100Q 18 21.5 K21 600 0.24 5000 EEVEB2G330M (4) 75 2.2 10 13.5 G13 29 0.24 3000 EEVEB2W2R2Q (4) 250 3.3 10 16.5 G17 41 0.24 4000 EEVEB2W3R3Q (4) 200 12.5 16.5 H16 49 0.24 5000 EEVEB2W4R7SQ (4) 150 10 18 16.5 K16 310 0.24 5000 EEVEB2W100SM (4) 125 22 18 21.5 K21 560 0.24 5000 EEVEB2W220M (4) 75 4.7 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “Q or M” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 CAUTION AND WARNING 1. The electronic components contained in this catalog are designed and produced for use in home electric appliances, office eq uipment, information equipment, communications equipment, and other general purpose electronic devices. Before use of any of these components for equipment that requires a high degree of safety, such as medical instruments, aeros pace equipment, disaster-prevention equipment, security equipment, vehicles (automobile, train, vessel), please be sure to contact our sales representative. 2. When applying one of these components for equipment requiring a high degree of safety, no matter what sort of application it might be, be sure to install a protective circuit or redundancy arrangement to enhance the safety of your equipment. In addition, please carry out the safety test on your own responsibility. 3. When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on thespecifications with us in advance. 4. Technical information contained in this catalog is intended to convey examples of typical performances and/or applications a nd is not intended to make any warranty with respect to the intellectual property rights or any other related rights of our company or any third parties nor grant any license under such rights. 5. In order to export products in this catalog, the exporter may be subject to the export license requirement under the Foreign Exchange and Foreign Trade Law of Japan. 6. No ozone-depleting substances (ODSs) under the Montreal Protocol are used in the manufacturing processes of Automotive & Ind ustrial Systems Company, Panasonic Corporation. Please contact Factory The information in this catalog is valid as of December 2015.