Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : TQ Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● 1 size smaller and same performance compare with V-TK series ● Low ESR (85 % low ESR in low temperature after endurance compare ● Endurance : 125 °C 2000 h ● RoHS compliant with V-TP series) Recommended applications ● Automotive Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +125 °C 35 V.DC 47 µF to 100 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV (µA) After 2 minutes Please see the attached characteristics list After the life test with DC rated working voltage at +125 °C±2 °C for 2000 hours, the capacitors shall meet the limits specified below. Capacitance change Within ±30 % of the initial value < 300 % of the initial limit tan d DC leakage current Within the initial limit Size Code ESR after D8 endurance Initial (+20 °C) 0.30 (Ω/100kHz) After 2000 h (-40 °C) 6 After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.65 10 k 0.95 100 k to 1.00 0.3 max. – + L Lot number (P) Series identification A±0.2 B±0.2 Capacitance (µF) H 47 V TQ 0D±0.5 Negative polarity marking (–) (I) Example : 35 V.DC 47 µF Marking color : BLACK (I) Dimensions K Marking 1k 0.85 W Rated Voltage code ( ) Reference size (Unit : mm) R. Voltage (V.DC) Code 35 V Size 0D code D8 6.3 L A, B 7.7±0.3 6.6 H I 7.8 max. 2.6 W P K 0.65±0.1 1.8 0.35 +- 0.15 0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 125 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 35 47 100 Specification 0D L Size code 6.3 6.3 7.7 7.7 D8 D8 Ripple current (100 kHz) (+125 °C) (mA r.m.s.) 197 197 Min. Packaging Q'ty ESR (100 kHz) (+20 °C) (Ω) tan d (120 Hz) (+20 °C) Part No. Reflow Taping (pcs) 0.30 0.30 0.16 0.16 EEETQV470XAP EEETQV101XAP (5) (5) 900 900 If Part number exceeds 12 digits, voltage code is abbreviated as follows; 1V → V · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016