SURFACE MOUNT BRIDGE DB101S THRU DB107S DF005S THRU DB10S VOLTAGE RANGE CURRENT DFS FEATURES • • • • • 1.0 Ampere 0.205 (5.2) 0.195 (5.0) Glass passivated chip junction Ideal for surface mounted applications Low leakage High forward surge current capability High temperature soldering guaranteed: 260℃/10 seconds at terminals 0.404 (10.3) 0.386 (9.80) 0.255 (6.5) 0.245 (6.2) - + - - 0.060 (1.524) 0.040 (1.016) 0.013 (0.330) 0.003 (0.076) 0.047 (1.20) 0.040 (1.02) MECHANICAL DATA • • • • • 50 to 1000 Volts 0.335 (8.51) 0.320 (8.13) Case: Molded plastic body Epoxy: UL94V-0 rate flame retardant Polarity: Molded on body LeadP: Plated terminals solderable per MIL-STD-202E method 208C Weight: 0.04 ounce, 1.0 gram 45 0.013 (0.330) 0.009 (0.241) O .135 (3.4) .115 (2.9) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% DB102S SYMBOLS DB101S DF005S DF01S Maximum Reverse Peak Repetitive Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Output Current, 0.06”(1.5mm) lead length at T A=40℃ (Note 2) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 1.0A TA=25℃ Maximum Reverse Current at rated DC blocking voltage per element TA=125℃ Typical Junction Capacitance (NOTE 1) Typical Thermal Resistance (NOTE 2) Operating and Storage Temperature Range VRRM VRMS VDC 50 35 50 100 70 100 DB103S DF02S DB104S DF04S DB105S DF06S DB106S DF08S DB107S DF10S UNIT 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts I(AV) 1.0 Amps IFSM 50 Amps I2 t 10 A2s VF 1.1 Volts IR CJ RΘJA TJ ,TSTG Notes: 1.Measured at 1.0MHz and applied reverse voltage of 4.0 Volts. 2.Unit mounted on P.C.B. with 0.51”×0.51” ( 13×13mm) copper pads. Web Site: www.hkmic.com 5 0.5 25 40 (-55 to +150) µAmps mAmps ℃/W VAC ℃ SURFACE MOUNT BRIDGE DB101S THRU DB107S DF005S THRU DB10S VOLTAGE RANGE CURRENT FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER ELEMENT 1.2 70 1.0 60 PEAK FORWARD SURGE, CURRENT,(A) AVERAGE FORWARD OUTPUT, CURRENT,( A) FIG. 1- DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 0.8 0.6 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.2 0 0 25 75 40 50 100 150 125 Tj =T j max Single Half Sine-Wave (JEDEC Method) 50 40 30 20 10 175 0 1 CYCLE 1 2 AMBIENT TEMPERATURE, ℃ 6 8 10 40 20 60 80 100 FIG. 4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 20 100 10 INSTANTANEOUS REVERSE CURRENT, (μ A) INSTANTANEOUS FORWARD CURRENT, ( A) 4 NUMBER OF CYCLES AT 60 Hz FIG. 3- TYPICAL FORWORD CHARACTERISTICS PER BRIDGE ELEMENT 1.0 0.1 0.01 Tj =25℃ PULSE WIDTH=300μs 1% DUTY CYCLE 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE,(V) 100 JUNCTION CAPACITANCE, (pF) 1.0 Ampere DF10S DF005S THRU DB101S DB107S RATINGS AND CHARACTERISTIC CURVES 0.4 50 to 1000 Volts 10 Tj =125℃ 1.0 0.1 Tj =25℃ FIG. 5- TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 10 T j =25℃ f=1MHz Vsig=50mVp-p 1 0.1 1.0 10 100 REVRESE VOLTAGE, (V) Web Site: www.hkmic.com 120 140