Conductive Polymer Aluminum Electrolytic Capacitors Surface Mount Type Series : LX (Low ESR / Low ESL Products) Features ● Large capacitance (560 μF max.) ESR (4.5 mΩ, 6 mΩ) ● Low ESL (3-terminals : 50 % less than 2-terminals) ● High ripple current (8500 mAr.m.s. max.) ● RoHS compliance, Halogen free ● Low Specifications Series Category temp. range Rated voltage range Nominal cap.range Capacitance tolerance DC leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady state) LX –55 °C to +105 °C 2 V.DC to 2.5 V.DC 330 μF to 560 μF ±20 % (120 Hz/+20 °C) I < 0.1 CV (μA) 2 minutes < 0.06 (120 Hz/+20 °C) Rated voltage × 1.25 (15 °C to 35 °C) +105 °C, 2000 h, rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 2 times of the initial limit DC leakage current < 3 times of the initial limit +60 °C, 90 %, 500 h, No-applied voltage Capacitance change of 2 V.DC to 2.5 V.DC initial measurd value +70 %, –20 % tan d < 2 times of the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) – H + Cap. Polarity bar (Positive) L W1 P4 Lot No. W2 + W2 – P1 R.V. code P3 P2 P1 Unit : mm Rated voltage mark d e 2 V.DC 2.5 V.DC Series L±0.2 W1±0.2 W2±0.1 H±0.1 P1±0.3 P2±0.1 P3±0.2 P4±0.2 LX 7.3 4.3 2.4 1.9 1.3 1.1 0.7 1.4 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Nov. 2015 Conductive Polymer Aluminum Electrolytic Capacitors Characteristics list Reflow ✽3 Case size (mm) Series Rated Capacitance voltage (±20 %) (V.DC) (μF) 330 2 LX 470 560 330 2.5 470 <Standard> Specification ✽1 L W H 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 Part number Min.✽4 Packaging Q’ty (pcs) EEFLX0D331R EEFLX0D331R4 EEFLX0D471R EEFLX0D471R4 EEFLX0D561R EEFLX0D561R4 EEFLX0E331R EEFLX0E331R4 EEFLX0E471R EEFLX0E471R4 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500 ✽2 Ripple ESR current (mAr.m.s.) (mΩ max.) 7500 6 8500 4.5 7500 6 8500 4.5 7500 6 8500 4.5 7500 6 8500 4.5 7500 6 8500 4.5 ✽1: Ripple current (100 kHz/ +45°C ), ✽2: ESR (100 kHz/+20 °C) ✽3: Please refer to the page of “Mounting Specifications”. ✽4: Please contact us when 500 pcs packing is necessary. Temperature compensation multipliers for ripple current Temp. T < 45 °C 45 °C < T < 85 °C 85 °C < T < 105 °C Coefficient 1.0 0.7 0.25 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Nov. 2015