JUMBO SOZA CELL JSOZA801 THRU JSOZA806 VOLTAGE RANGE 100 to 600 Volts CURRENT 80.0 Amperes TECHNICAL SPECIFICATION： FEATURES • • • • .327(8.30) .320(8.15) Low Leakage Low forward voltage drop High current capability High forward surge current capacity DIA MECHANICAL DATA • • • • • 0.086(2.20) 0.078(2.0) Copper slug Technology: cell with vacuum soldered Polarity: red dots denotes cathode end Mounting Position: Any Weight: 0.0275 ounces, 0.78 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS JSOZA801 Maximum Repetitive Peak Reverse Voltage VRRM 100 200 300 400 600 Volts Maximum RMS Voltage VRMS 70 140 210 280 420 Volts Maximum DC Blocking Voltage VDC 100 200 300 400 600 Volts Maximum Average Forward Rectified Current, At Tc=110℃ JSOZA802 JSOZA803 JSOZA804 JSOZA806 UNIT IO 80.0 Amps IFSM 700 Amps VF 1.02 Volts Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Maximum instantaneous Forward Voltage at 100A Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage per element TA=100℃ Typical Thermal Resistance Operating and Storage Temperature Range IR UA 400 RθJC 0.8 ℃/W TJ,TSTG (-65 to +175) ℃ Notes: 1. 5.0 Enough heatsink must be considered in application. Web Site: www.hkmic.com JUMBO SOZA CELL JSOZA801 THRU JSOZA806 VOLTAGE RANGE 100 to 600 Volts CURRENT 80.0 Amperes RATINGS AND CHARACTERISTIC CURVES JSOZA801 THRU JSOZA806 F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 80 700 70 600 PEAK FORWARD SURGE CURRENT,(A) AVERAGE FORWARD CURRENT, (A) F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE 60 50 40 30 Single Phase 20 8.3ms Single Half Sine-Wave 500 (JEDEC Method) Tj=Tj max 400 300 200 100 1 Cycle Half Wave 60Hz Resistive or Inductive Load 10 1 2 4 6 8 10 20 40 60 80 100 0.375″(9.5mm) Lead Length NUMBER OF CYCLES AT 60 Hz 0 0 25 50 75 110 100 125 150 175 CASE TEMPERATURE, (℃) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS F1G.4 FORWARD ROWER DISSIPATION AVERAGE POWER DISSIPATION (W) INSTANTANEOUS FORWARD CURRENT, (A) 1000 100 10 100 70 SQUARE WAVE DC 40 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 0 0 1.0 0.1 0.6 20 40 60 80 AVERAGE FORWARD CURRENT, (A) 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) Web Site: www.hkmic.com 100