KSM50N06 KERSMI ELECTRONIC CO.,LTD. 60V N-channel MOSFET Description This N-channel MOSFETS use advanced trench technology and design to provide excellent RDS(on) with low gate charge. It can be used in a wide variety of applications. Features 1) 2) 3) 4) BVDSS RDSON ID 60V 0.018Ω 50A Low gate charge. Green device available. Advanced high cell denity trench technology for ultra RDS(ON) Excellent package for good heat dissipation. TO-220 Absolute Maximum Ratings TC=25℃,unless otherwise noted Symbol Parameter Ratings Units VDS Drain-Source Voltage 60 VGS Gate-Source Voltage ±20 V V Continuous Drain Current-1 50 Continuous Drain Current-T=100℃ 35.4 Pulsed Drain Current2 200 EAS Single Pulse Avalanche Energy3 490 PD Power Dissipation4 120 TJ, TSTG Operating and Storage Junction Temperature Range -55 to +175 ID A mJ W ℃ Thermal Characteristics www.kersemi.com 1 KSM50N06 KERSMI ELECTRONIC CO.,LTD. 60V N-channel MOSFET Symbol Parameter Ratings RƟJC Thermal Resistance, Junction to Case1 1.24 RƟJA Thermal Resistance ,Junction to Ambient1 62.5 Units ℃/W Package Marking and Ordering Information Part NO. Marking Package KSM50N06 KSM50N06 TO-220 Electrical Characteristics TC=25℃ Symbol Parameter unless otherwise noted Conditions Min Typ Max Units Off Characteristics BVDSS Drain-Sourtce Breakdown Voltage VDS=0V,ID=250μA 60 — — IDSS Zero Gate Voltage Drain Current VDS=0V, VDS=32V — — 1 IGSS Gate-Source Leakage Current VDS=±20V, VDS=0A — — ±100 v μA nA VDS=VDS, ID=250μA 2.0 — 4.0 V VDS=10V,ID=6A — 0.016 0.018 VDS=2.5V,ID=5A — — — VDS=5V,ID=12A — 22 — — 1180 1540 — 440 580 — 65 90 — 15 40 — 105 220 — 60 130 On Characteristics VGS(th) GATE-Source Threshold Voltage RDS(ON) Drain-Source On Resistance² GFS Forward Transconductance Ω --S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS=15V,VGS=0V, f=1MHz pF Switching Characteristics td(off) Turn-Off Delay Time tf Fall Time — 65 140 Qg Total Gate Charge — 31 41 Qgs Gate-Source Charge VGS=4.5V, VDS=20V, — 8 — Qgd Gate-Drain “Miller” Charge ID=6A — 13 — ns ns ns ns nC nC nC — — 1.5 V — 52 — ns — 75 — nC td(on) Turn-On Delay Time tr Rise Time VDS=20V, VGS=10V,RGEN=3.3Ω Drain-Source Diode Characteristics VSD Source-Drain Diode ForwardVoltage² trr Reverse Recovery Time Qrr Reverse Recovery Charge VGS=0V,IS =1A IF=7A,di/dt=100A/ www.kersemi.com 2 KSM50N06 KERSMI ELECTRONIC CO.,LTD. 60V N-channel MOSFET Notes: 1. The data tested by surface mounted on a 1 inch²FR-4 board 2OZ copper. 2. The data tested by pulse width≤300us,duty cycle≤2% 3. The EAS data shows Max. rating. The test condition is VDD=25v,VGS=10V,L=0.1mH,iAS=17.8A 4. The power dissipation is limited by 150℃ junction temperature. Typical Characteristics TJ=25℃ Figure 1. On-Region Characteristics Figure 3. Capacitance Characteristics unless otherwise noted Figure 2. Transfer Characteristics Figure 4. On-Resistance Variation vs. Drain Current and Gate Voltage www.kersemi.com 3 KSM50N06 KERSMI ELECTRONIC CO.,LTD. 60V Figure 5. Gate Charge Characteristics Figure 7.Breakdown Voltage Variation vs. Temperature N-channel MOSFET Figure 6. Body Diode Forward Voltage Variation vs. Source Current and Temperature Figure 8.Maximum Safe Operating Area Figure 9. Transient Thermal Response Curve www.kersemi.com 4