参数PDF下载

KSM27P06
KERSMI ELECTRONIC CO.,LTD.
-60V P-channel MOSFET
Description
This P-channel MOSFETS use advanced trench technology and design to provide
excellent RDS(on) with low gate charge. It can be used in a wide variety of applications.
Features
BVDSS
-60V
1)
2)
3)
4)
RDSON
ID
0.07Ω
-27A
Low gate charge.
Green device available.
Advanced high cell denity trench technology for ultra RDS(ON)
Excellent package for good heat dissipation.
TO-220
Absolute Maximum Ratings TC=25℃,unless otherwise noted
Symbol
Parameter
Ratings
Units
VDS
Drain-Source Voltage
-60
VGS
Gate-Source Voltage
±20
V
V
Continuous Drain Current-1
-27
Continuous Drain Current-T=100℃
-19.1
Pulsed Drain Current2
-108
EAS
Single Pulse Avalanche Energy3
560
PD
Power Dissipation4
120
TJ, TSTG
Operating and Storage Junction Temperature
Range
-55 to
+175
ID
A
mJ
W
℃
Thermal Characteristics
www.kersemi.com
1
KSM27P06
KERSMI ELECTRONIC CO.,LTD.
-60V P-channel MOSFET
Symbol
Parameter
Ratings
RƟJC
Thermal Resistance, Junction to Case1
1.25
RƟJA
Thermal Resistance ,Junction to Ambient1
62.5
Units
℃/W
Package Marking and Ordering Information
Part NO.
Marking
Package
KSM27P06
KSM27P06
TO-220
Electrical Characteristics TC=25℃
Symbol
Parameter
unless otherwise noted
Conditions
Min
Typ
Max
Units
Off Characteristics
BVDSS
Drain-Sourtce Breakdown Voltage
VDS=0V,ID=250μA
-60
—
—
IDSS
Zero Gate Voltage Drain Current
VDS=0V, VDS=32V
—
—
-1
IGSS
Gate-Source Leakage Current
VDS=±20V, VDS=0A
—
—
±100
v
μA
nA
VDS=VDS, ID=250μA
-2.0
—
-4.0
V
VDS=10V,ID=6A
—
0.055
0.07
VDS=2.5V,ID=5A
—
—
—
VDS=5V,ID=12A
—
12.4
—
—
1100
1400
—
510
660
—
120
155
—
18
45
—
185
380
—
30
70
On Characteristics
VGS(th)
GATE-Source Threshold Voltage
RDS(ON)
Drain-Source On Resistance²
GFS
Forward Transconductance
Ω
--S
Dynamic Characteristics
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
VDS=15V,VGS=0V,
f=1MHz
pF
Switching Characteristics
td(off)
Turn-Off Delay Time
tf
Fall Time
—
90
175
Qg
Total Gate Charge
—
33
43
Qgs
Gate-Source Charge
VGS=4.5V, VDS=20V,
—
6.8
—
Qgd
Gate-Drain “Miller” Charge
ID=6A
—
18
—
ns
ns
ns
ns
nC
nC
nC
—
—
-4.0
V
—
105
—
ns
—
0.41
—
nC
td(on)
Turn-On Delay Time
tr
Rise Time
VDS=20V,
VGS=10V,RGEN=3.3Ω
Drain-Source Diode Characteristics
VSD
Source-Drain Diode ForwardVoltage²
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
VGS=0V,IS =1A
IF=7A,di/dt=100A/μS
www.kersemi.com
2
KSM27P06
KERSMI ELECTRONIC CO.,LTD.
-60V P-channel MOSFET
Notes:
1. The data tested by surface mounted on a 1 inch²FR-4 board 2OZ copper.
2. The data tested by pulse width≤300us,duty cycle≤2%
3. The EAS data shows Max. rating. The test condition is VDD=25v,VGS=10V,L=0.1mH,iAS=17.8A
4. The power dissipation is limited by 150℃ junction temperature.
Typical Characteristics TJ=25℃
Figure 1. On-Region Characteristics
Figure 3. Capacitance Characteristics
unless otherwise noted
Figure 2. Transfer Characteristics
Figure 4. On-Resistance Variation vs.
Drain Current and Gate Voltage
www.kersemi.com
3
KSM27P06
KERSMI ELECTRONIC CO.,LTD.
-60V P-channel MOSFET
Figure 5. Gate Charge Characteristics
Figure 7.Breakdown Voltage Variation
vs. Temperature
Figure 6. Body Diode Forward Voltage
Variation vs. Source Current
and Temperature
Figure 8.Maximum Safe Operating Area
Figure 9. Transient Thermal Response Curve
www.kersemi.com
4