SURFACE MOUNT BRIDGE VOLTAGE RANGE MDF005 THRU MDF10 CURRENT FEATURES 1.10±0.02 6.65±0.15 MAX 2.9 0.5 2.4±0.2 o 5 5o 3.9±0.1 4.7±0.2 5o 0.2-0.3 • • • 1.0 Amperes MINI DFS Glass passivated chip junction Ideal for surface mounted applications Low leakage High forward surge current capability High temperature soldering guaranteed: 260℃/10 seconds at terminals 0.5 • 50 to 1000 Volts MECHANICAL DATA • • • • • Case: Epoxy, Molded plastic body Epoxy: UL94V-0 rate fkame retardant Polarity: Molded on body Lead: Plated terminals solderable per MIL-STD-202E method 208C Weight: 0.4 ounce, 0.1 gram 0.65±0.15 2.54±0.02 Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS MDF005 MDF01 Maximum Reverse Peak Repetitive Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Output Current, 0.06”(1.5mm) lead length at TC=40℃ (Note 2) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 0.8A Maximum DC Reverse Current at rated DC blocking voltage per element Typical Junction Capacitance (NOTE 1) Typical Thermal Resistance (NOTE 2) Operating and Storage Temperature Range TA=25℃ TA=125℃ MDF02 MDF04 MDF06 MDF02 MDF10 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 UNIT Volts Volts Volts I(AV) 0.8 Amps IFSM 40 Amps I2 t 8 A2s VF 1.2 Volts 10 0.5 25 50 (-55 to +150) µAmps IR CJ RΘJC TJ ,TSTG Notes: 1.Measured at 1.0MHz and applied reverse voltage of 4.0 Volts. 2.Unit mounted on P.C.B. with 0.51”×0.51” ( 13×13mm) Copper plate. Web Site: www.hkmic.com µAmps ℃/W VAC ℃ SURFACE MOUNT BRIDGE VOLTAGE RANGE MDF005 THRU MDF10 50 to 1000 Volts CURRENT 1.0 Ampere RATINGS AND CHARACTERISTIC CURVES MDF005 THRU MDF10 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER ELEMENT FIG. 1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 70 PEAK FORWARD SURGE, CURRENT,(A) AVERAGE FORWARD OUTPUT, CURRENT,(A) 1.2 1.0 0.8 0.6 Single Phase Half wave 60Hz Resistive or Inductive Load 0.4 0.2 0 60 40 30 20 10 0 0 40 50 25 75 100 125 Tj =T j max Single Half Sine-Wave (JEDEC Method ) 50 1 CYCLE 1 2 175 150 4 6 8 10 20 60 80 100 40 NUMBER OF CYCLES AT 60 Hz AMBIENT TEMPERATURE, ℃ FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT FIG. 3- TYPICAL FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 100 INSTANTANEOUS REVERSE CURRENT, (μ A) INSTANTANEOUS FORWARD CURRENT, (A) 20 10 1.0 0.1 TJ=25℃ PULSE WIDTH=300μs 1% DUTY CYCLE 0.01 0.4 10 TJ=125℃ 1.0 0.1 TJ=25℃ 0.01 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 5- TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT JUNCTION CAPACITANCE,( pF) 100 10 TJ =25℃ f=1MHz Vsig=50mVp-p 1 0.1 1.0 10 100 REVRESE VOLTAGE, (V) Web Site: www.hkmic.com 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 120 140