Products Catalog (Fixed Resistors)(1212KB)

2016
CATALOG
Fixed Resistors
2016.4
industrial.panasonic.com/
Fixed Resistors CONTENTS
Classification
Product Item
Part No.
Page
Safety Precautions (Common precautions for Fixed Resistors)
Chip
Resistors
High
Precision
Current
Sensing
2
Thick Film Chip Resistors
ERJ XG, 1G, 2G, 3G, 6G, 8G, 14, 12, 12Z, 1T
3
Precision Thick Film Chip Resistors
ERJ XG, 1G, 1R, 2R, 3R, 6R, 3E, 6E, 8E, 14, 12, 1T
5
Metal Film (Thin Film) Chip Resistors,
High Reliability Type
ERA 1A, 2A, 3A, 6A, 8A
8
Metal Film (Thin Film) Chip Resistors,
High Sound Quality Type
ERA 2H
11
Thick Film Chip Resistors
/ Low Resistance Type
ERJ 2LW, 3LW, 6LW, 2BW,3BW,6BW,8BW,6CW,8CW
ERJ 2B, 3B, 6D, 6B, 8B, 14B, 3R, 6R, 8R, 14R, 12R,12Z,
ERJ 1TR, L03, L06, L08, L14, L12, L1D, L1W
13
Current Sensing Resistors, Metal Plate Type ERJ MP2G, MP2K, MP3K, MP3M, MP4M, MP4P
17
Current Sensing Resistors, Metal Plate Type ERJ MS4S, MS4H, MS6S, MB1S
21
Current Sensing Resistors, Metal Plate Type ERJ M1WS, M1WT
25
High Power Chip Resistors / Wide Terminal Type ERJ A1, B1, B2, B3
27
High Precision
Small&High Thick Film Chip Resistors
Power
Surface Mount
Anti-Surge Thick Film Chip Resistors
Resistors
Anti-Pulse Thick Film Chip Resistors
Anti-Sulfurated
ERJ PB3, PB6
30
ERJ PA2, P03, PA3, P06, P08, P14
32
ERJ T06, T08, T14
35
Anti-Sulfurated Thick Film
Chip Resistors
ERJ S02, S03, S06, S08, S14, S12, S1D, S1T
ERJ U01, U02, U03, U06, U08, U14, U12, U1D, U1T
ERJ U6S, U6Q
38
Anti-Sulfurated High Power Chip Resistors /
Wide Terminal Type
ERJ C1
41
Chip Resistor Array
EXB 14V, 18V, 24V, 28V, N8V, 2HV, 34V,
V4V, 38V, V8V, S8V
43
EXB U24, U28, U2H, U34, U38
46
EXB D, E, A, Q
48
EXB 14AT, 24AT
50
Resistor
Anti-Sulfurated Chip Resistor Array
Network/Array
Chip Resistor Networks
Chip Attenuator
Packaging Methods (Taping)
52
Recommended Land Pattern
Common
specifications Recommended Soldering Conditions
Power
Type Resistors
(Leaded)
Fusing Resistors
57
59
Safety Precautions (Common precautions for Surface Mount Resistors)
60
Metal (Oxide) Film Resistors,
Flame-Retardant
ERG 12S, 1S, 1F, 2S, 2F, 3S, 3F, 5S, 5F
ERX 12S, 1S, 1F, 2S, 2F, 3S, 3F, 5S, 5F
61
Anti-Pulse Power Resistors
ERG 12D, 1D, 2D, 3D
68
Metal Film Resistors / Low Resistance Value
ERX 12L, 1L, 2L
70
Metal Film Fusing Resistors
ERQ 1Z, 2Z, 12Z, 14Z
ERQ 1AB, 2AB, 12A, 14A
72
Fixed Resistors Appendix
78
All products in this catalog comply with the RoHS Directive.
The RoHS Directive is “the Directive (2011/65/EU) on the Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment “ and its revisions.
02
–1–
Apr. 2016
Safety Precautions (Common precautions for Fixed Resistors)
• When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifications with us in advance. The design and specifications in this catalog are subject
to change without prior notice.
• Do not use the products beyond the specifications described in this catalog.
• This catalog explains the quality and performance of the products as individual components. Before use, check
and evaluate their operations when installed in your products.
• Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment
where a defect in these products may cause the loss of human life or other significant damage, such as damage to
vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating
appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment.
✽ Systems equipped with a protection circuit and a protection device
✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault
(1) Precautions for use
• These products are designed and manufactured for general and standard use in general electronic equipment
(e.g. AV equipment, home electric appliances, office equipment, information and communication equipment)
• These products are not intended for use in the following special conditions. Before using the products,
carefully check the effects on their quality and performance, and determine whether or not they can be used.
1. In liquid, such as water, oil, chemicals, or organic solvent
2. In direct sunlight, outdoors, or in dust
3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
4. Electric Static Discharge (ESD) Environment
These components are sensitive to static electricity and can be damaged under static shock (ESD).
Please take measures to avoid any of these environments.
Smaller components are more sensitive to ESD environment.
5. Electromagnetic Environment
Avoid any environment where strong electromagnetic waves exist.
6. In an environment where these products cause dew condensation
7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with
resin or other materials
• These products generate Joule heat when energized. Carefully position these products so that their heat will
not affect the other components.
• Carefully position these products so that their temperatures will not exceed the category temperature range due
to the effects of neighboring heat-generating components. Do not mount or place heat-generating components
or inflammables, such as vinyl-coated wires, near these products.
• Note that non-cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the
performance or reliability of the products.
• Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance
or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water
residues. Otherwise, the insulation performance may be deteriorated.
(2) Precautions for storage
The performance of these products, including the solderability, is guaranteed for a year from the date of arrival
at your company, provided that they remain packed as they were when delivered and stored at a temperature
of 5 °C to 35 °C and a relative humidity of 45 % to 85 %.
Even within the above guarantee periods, do not store these products in the following conditions. Otherwise,
their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping
materials) may be deformed or deteriorated, resulting in mounting failures.
1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
2. In direct sunlight
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
01 Sep. 2014
–2–
Thick Film Chip Resistors
Thick Film Chip Resistors
Type: ERJ XG, 1G, 2G, 3G, 6G,
8G, 14, 12, 12Z, 1T
Features
● Small
size and lightweight
reliability
Metal glaze thick film resistive element and three layers of electrodes
● Compatible with placement machines
Taping packaging available
● Suitable for both reflow and flow soldering
● Reference Standards
IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B
● AEC-Q200 qualified (Exemption ERJXG)
● RoHS compliant
● High
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
● ERJXGN,
1GN, 2GE, 3GE, 6GE, 8GE, 14, 12, 12Z, 1T Type, ±5 %
1
2
3
4
5
6
7
8
9
10
11
12
E
R
J
3
G
E
Y
J
1
0
2
V
Product Code
Thick Film
Chip Resistors
Size, Power Rating
Code Inch Power R.
XGN 01005 0.031 W
0.05 W
1GN 0201
0.1 W
2GE 0402
0.1 W
3GE 0603
6GE 0805 0.125 W
0.25 W
8GE 1206
0.5 W
14 1210
0.75 W
12 1812
0.75 W
12Z 2010
1W
1T 2512
Code
Resistance Tolerance
Marking
Marking
Code
J
0
Tolerance
±5 %
Jumper
Code
Packaging Methods
Packaging
Part No.
Y
Pressed Carrier Taping
W8P2, 20,000 pcs.
U
Embossed Carrier Taping
W4P1, 40,000 pcs.
Resistance Value
C
Pressed Carrier Taping
2 mm pitch, 15,000 pcs. ERJ1GN
The first two digits are significant figures of resistance and
the third one denotes number of zeros following.
Decimal Point is expressed by R as 4.7 = 4R7.
Jumper is expressed by R00.
X
Punched Carrier Taping
2 mm pitch, 10,000 pcs.
Y
Punched Carrier Taping
2 mm pitch, 20,000 pcs.
V
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
Y
✽Nil
Value Marking on
black side
No marking
✽ When omitted, the rest of the P/N factors shall be moved up respectively.
(Only XGN, 1GN, 2GE type)
U
ERJXGN
ERJ2GE
ERJ3GE
ERJ6GE
ERJ8GE
ERJ14
Embossed Carrier Taping
ERJ12
4 mm pitch, 5,000 pcs.
ERJ12Z
Embossed Carrier Taping
ERJ1T
4 mm pitch, 4,000 pcs.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05
–3–
Mar. 2015
Thick Film Chip Resistors
Construction
Dimensions in mm (not to scale)
L
a
W
Protective coating
Electrode (Inner)
Alumina substrate
t
b
Dimensions (mm)
Part No.
(inch size)
ERJXG
(01005)
ERJ1G
(0201)
ERJ2G
(0402)
ERJ3G
(0603)
ERJ6G
(0805)
ERJ8G
(1206)
ERJ14
(1210)
ERJ12
(1812)
ERJ12Z
(2010)
ERJ1T
(2512)
Electrode
(Between)
Thick film
resistive element
Electrode (Outer)
Mass (Weight)
(g/1000 pcs.)
L
W
a
b
t
0.40±0.02
0.20±0.02
0.10±0.03
0.10±0.03
0.13±0.02
0.04
±0.03
±0.03
±0.05
±0.05
±0.03
0.15
±0.05
0.8
±0.10
2
±0.10
4
±0.10
10
±0.10
0.60
±0.05
1.00
±0.15
1.60
±0.20
2.00
+0.05
–0.20
3.20
±0.20
0.30
±0.05
0.50
+0.15
–0.05
0.80
±0.10
1.25
+0.05
–0.15
1.60
±0.20
0.10
±0.10
0.20
±0.20
0.30
±0.20
0.40
±0.20
0.50
±0.20
0.15
±0.05
0.25
±0.15
0.30
±0.20
0.40
±0.20
0.50
±0.20
0.23
0.35
0.45
0.60
0.60
3.20
2.50
0.50
0.50
0.60
16
4.50±0.20
3.20±0.20
0.50±0.20
0.50±0.20
0.60±0.10
27
5.00±0.20
2.50±0.20
0.60±0.20
0.60±0.20
0.60±0.10
27
±0.20
±0.20
±0.20
±0.20
±0.10
45
6.40
3.20
0.65
0.60
0.60
Ratings
[For Resistor]
Part No.
(inch size)
Power Rating Limiting Element Maximum Overload Resistance
Voltage(1)
Voltage(2)
Tolerance
at 70 °C
(%)
(W)
(V)
(V)
Resistance
Range
(Ω)
T.C.R.
(×10–6/°C)
Category
Temperature Range
(°C)
ERJXG
(01005)
0.031
15
30
±5
<10 Ω : –100 to +600
4.7 to 1 M (E24) 10 Ω to 100 Ω : ±300
100 Ω< : ±200
–55 to +125
ERJ1G
(0201)
0.05
25
50
±5
1 to 10 M (E24)
–55 to +125
ERJ2G
(0402)
0.1
50
100
±5
<10 Ω:
1 to 10 M (E24) –100 to +600
–55 to +155
ERJ3G
(0603)
0.1
75
150
±5
1 to 10 M (E24)
–55 to +155
ERJ6G
150
200
±5
1 to 10 M (E24)
–55 to +155
(0805)
0.125
ERJ8G
(1206)
0.25
200
400
±5
ERJ14
(1210)
0.5
200
400
ERJ12
0.75
200
500
(1812)
±5
10 Ω to 1 MΩ:
1 to 10 M (E24) ±200
1 to 10 M (E24)
–55 to +155
±5
1 to 10 M (E24)
–55 to +155
1 to 10 M (E24) 1 MΩ<:
–400 to +150
1 to 1 M (E24)
–55 to +155
ERJ12Z
(2010)
0.75
200
500
±5
ERJ1T
1
200
500
±5
(2512)
–55 to +155
–55 to +155
(1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Values, or Limiting Element Voltage
listed above, whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 (Only ERJ2G=2.0) × RCWV or max. Overload Voltage
listed above whichever less.
[For Jumper]
Part No.
Rated Current Maximum Overload Current
(inch size)
(A)
(A)
ERJXG (01005)
0.5
1
ERJ1G (0201)
ERJ2G (0402)
1
2
ERJ3G (0603)
ERJ6G (0805)
ERJ8G (1206)
ERJ14 (1210)
2
4
ERJ12 (1812)
ERJ12Z (2010)
ERJ1T (2512)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure below.
Rated Load (%)
–55 °C
100
80
70 °C
2G, 3G, 6G, 8G,
14, 12, 12Z, 1T
60
40
XG, 1G
155 °C
20
125 °C
0
–60 –40 –20 0 20 40 60 80 100 120 140 160 180
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
05
–4–
Mar. 2015
Precision Thick Film Chip Resistors
Precision Thick Film Chip Resistors
Type: ERJ XG, 1G
ERJ 1R, 2R, 3R, 6R
ERJ 3E, 6E, 8E, 14, 12, 1T
Features
● Small size and
● High reliability
lightweight
Metal glaze thick film resistive element and three layers of electrodes
with placement machines
Taping packaging available
● Suitable for both reflow and flow soldering
● Low Resistance Tolerance
ERJXG, 1G, 2R, 3E, 6E, 8E, 14, 12, 1T Type : ±1 %
ERJ1R, 2R, 3R, 6R Type : ±0.5 %
● Reference Standards
IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B
● AEC-Q200 qualified (Exemption ERJXG, ERJ1R)
● RoHS compliant
● Compatible
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
● ERJ1R,
2R, 3R, 6R Type, ±0.5 %
Product Code
Thick Film
Chip Resistors
1
2
3
4
5
6
7
8
9
10
11
12
E
R
J
3
R
B
D
1
0
0
2
V
Size, Power Rating
Code Inch Power R.
1R 0201 0.05 W
2R 0402 0.063 W
3R 0603 0.1 W
6R 0805 0.1 W
T.C.R. Marking
Code
T.C.R.
±50×10–6/˚C (1R, 2R)
H
±50×10–6/˚C (3R, 6R)
B
±100×10–6/˚C (2R)
K
±100×10–6/˚C (3R, 6R)
E
Resistance Tolerance
Code
Tolerance
D
±0.5 %
Code
Packaging Methods
Packaging
Part No.
C
Pressed Carrier Taping
ERJ1R
2 mm pitch, 15,000 pcs.
X
Punched Carrier Taping
ERJ2R
2 mm pitch, 10,000 pcs.
V
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
ERJ3R
ERJ6R
Resistance Value
The first three digits are significant figures of resistance
and the last one denotes number of zeros following.
Example: 1002 →10 kΩ
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06
–5–
Apr. 2015
Precision Thick Film Chip Resistors
● ERJXG,
1G, 2R, 3E, 6E, 8E, 14, 12, 1T Type, ±1 %
1
2
3
4
5
6
7
8
9
10
11
12
E
R
J
8
E
N
F
1
0
0
2
V
Product Code
Thick Film
Chip Resistors
Size, Power Rating
Code
Inch Power R.
XGN 01005 0.031 W
1GN
0201
0.05 W
2RK
0402
0.1 W
3EK
0603
0.1 W
6EN
0805 0.125 W
8EN
1206
0.25 W
14N
1210
0.5 W
12N
1812
0.75 W
12S
2010
0.75 W
1TN
2512
1W
Resistance Tolerance
Code Tolerance
±1 %
F
Y
Packaging Methods
Packaging
Part No.
Pressed Carrier Taping
ERJXGN
2 mm pitch, 20,000 pcs.
C
Pressed Carrier Taping
2 mm pitch, 15,000 pcs. ERJ1GN
X
Punched Carrier Taping
2 mm pitch, 10,000 pcs. ERJ2RK
V
ERJ3EK
Punched Carrier Taping
ERJ6EN
4 mm pitch, 5,000 pcs.
ERJ8EN
Code
Resistance Value
The first three digits are significant figures
of resistance and the last one denotes
number of zeros following.
Decimal point is expressed by "R".
Example : 1002 → 10 kΩ
U
ERJ14N
Embossed Carrier Taping
ERJ12N
4 mm pitch, 5,000 pcs.
ERJ12S
Embossed Carrier Taping
4 mm pitch, 4,000 pcs. ERJ1TN
Construction
Dimensions in mm (not to scale)
L
a
W
Protective coating
t
Alumina substrate
b
Electrode (Inner)
Part No.
(inch size)
ERJXG
(01005)
ERJ1G, 1R
(0201)
ERJ2R□
(0402)
ERJ3R□
ERJ3EK
(0603)
ERJ6R□
ERJ6EN
(0805)
ERJ8EN
(1206)
ERJ14N
(1210)
ERJ12N
(1812)
ERJ12S
(2010)
ERJ1TN
(2512)
Electrode
(Between)
Thick film
resistive element
Electrode (Outer)
Dimensions (mm)
L
±0.02
0.40
±0.03
0.60
W
±0.02
0.20
±0.03
0.30
±0.03
0.10
±0.05
0.10
±0.05
0.50
±0.15
0.80 –0.05 0.30
±0.20
1.25
±0.10
1.60
+0.05
–0.15
1.00
1.60
2.00
+0.05
–0.20
3.20
±0.20
3.20
±0.05
a
2.50
±0.20
3.20
±0.20
2.50
±0.20
3.20
4.50
5.00
6.40
±0.03
0.10
±0.05
0.8
±0.15
0.45
±0.10
2
±0.20
0.60
±0.10
4
0.60
±0.10
10
16
0.40
±0.20
0.50
±0.20
0.50
±0.20
0.60
±0.20
0.65
0.15
0.35
±0.20
0.50
0.04
±0.05
0.30
±0.20
±0.02
0.23
±0.20
0.40
0.13
±0.05
0.15
0.25
0.20
Mass (Weight)
[g/1000 pcs.]
t
±0.03
±0.10
+0.15
±0.20
b
±0.20
0.50
±0.20
0.60
±0.10
±0.20
0.60
±0.10
27
±0.20
0.60
±0.10
27
±0.20
0.60
±0.10
45
0.50
±0.20
0.50
±0.20
0.60
±0.20
0.60
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06
–6–
Apr. 2015
Precision Thick Film Chip Resistors
Ratings
<±0.5 %>
Part No.
(inch size)
Power Rating Limiting Element Maximum Overload Resistance
(1)
(2)
at 70 °C
Voltage
Voltage
Tolerance
(%)
(W)
(V)
(V)
Resistance
Range
(Ω)
T.C.R.
–6
(×10 /°C)
Category
Temperature Range
(°C)
ERJ1RH
(0201)
0.05
15
30
±0.5
1 k to 1 M
(E24, E96)
±50
–55 to +125
ERJ2RH
(0402)
0.063
50
100
±0.5
100 to 100 k
(E24, E96)
±50
–55 to +125
ERJ2RK
(0402)
0.063
50
100
±0.5
10 to 97.6
102 k to 1 M
(E24, E96)
±100
–55 to +125
ERJ3RB
(0603)
0.1
50
100
±0.5
ERJ3RE
(0603)
0.1
50
100
±0.5
ERJ6RB
(0805)
0.1
150
200
±0.5
ERJ6RE
(0805)
0.1
150
200
±0.5
100 to 100 k
(E24, E96)
10 to 97.6
102 k to 1 M
(E24, E96)
100 to 100 k
(E24, E96)
±50
–55 to +125
±100
–55 to +125
±50
–55 to +125
10 to 97.6
102 k to 1 M
(E24, E96)
±100
–55 to +125
Resistance
Range
(Ω)
T.C.R.
–6
(×10 /°C)
Category
Temperature Range
(°C)
<100 Ω : ±300
100 Ω < : ±200
–55 to +125
±200
–55 to +125
±100
–55 to +155
±100
–55 to +155
±100
–55 to +155
±100
–55 to +155
±100
–55 to +155
±100
–55 to +155
±100
–55 to +155
±100
–55 to +155
<±1 %>
Part No.
(inch size)
ERJXGN
(01005)
ERJ1GN
(0201)
ERJ2RK
(0402)
ERJ3EK
(0603)
ERJ6EN
(0805)
ERJ8EN
(1206)
ERJ14N
(1210)
ERJ12N
(1812)
ERJ12S
(2010)
ERJ1TN
(2512)
Power Rating Limiting Element Maximum Overload Resistance
(1)
(2)
at 70 °C
Voltage
Voltage
Tolerance
(%)
(W)
(V)
(V)
0.031
15
30
±1
0.05
25
50
±1
0.1
50
100
±1
0.1
75
150
±1
0.125
150
200
±1
0.25
200
400
±1
0.5
200
400
±1
0.75
200
500
±1
0.75
200
500
±1
1
200
500
±1
10 to 1 M
(E24, E96)
10 to 1 M(3)
(E24, E96)
10 to 1 M(3)
(E24, E96)
10 to 1 M
(E24, E96)
10 to 2.2 M
(E24, E96)
10 to 2.2 M
(E24, E96)
10 to 1 M
(E24, E96)
10 to 1 M
(E24, E96)
10 to 1 M
(E24, E96)
10 to 1 M
(E24, E96)
(1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Values, or Limiting Element Voltage
listed above, whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 (Only ERJ2RK ±1% =2.0) × RCWV or max.
Overload Voltage listed above whichever less.
(3) Please contact us when you need a type with a resistance of less than 10 Ω.
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
Rated Load (%)
–55 °C
100
70 °C
80
60
40
20
0
–60 –40 –20
2RK, 3E, 6E, 8E,
14, 12, 1T
XG, 1G, 1R, 2RH,
2RK, 3R, 6R
155 °C
125 °C
0 20 40 60 80 100 120 140 160 180
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06
–7–
Apr. 2015
Metal Film (Thin Film) Chip Resistors, High Reliability Type
Metal Film (Thin Film) Chip Resistors,
High Reliability Type
Type: ERA 1A, 2A, 3A, 6A, 8A
Features
reliability ................ Stable at high temperature and humidity
(85 °C 85 %RH rated load, Category temperature range : –55 °C to +155 °C)
● High accuracy ............... Small resistance tolerance and Temperature Coefficient of Resistance
● High performance ......... Low current noise, excellent linearity
● Reference Standard ...... IEC 60115-8, JIS C 5201-8, EIAJ RC-2133B
● AEC-Q200 qualified
● RoHS compliant
● High
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
● E24
Series
Product Code
Metal Film
Chip Resistors
1
2
3
4
5
6
7
8
9
10
11
E
R
A
3
A
E
B
1
0
2
V
Size, Power Rating
Code Inch Power Rating
0.05 W
1A
0201
0.063 W
2A
0402
0.1 W
3A
0603
0.125 W
6A
0805
0.25 W
8A
1206
Resistance Tolerance
Code
Tolerance
W
±0.05 %
B
±0.1 %
C
±0.25 %
D
±0.5 %
Temperature Coefficient
T.C.R.
Code
±10×10–6/°C
R
±15×10–6/°C
P
±25×10–6/°C
E
±50×10–6/°C
H
±100×10–6/°C
K
Packaging Methods
Code
C
X
V
Packaging
Pressed Carrier Taping
2 mm pitch, 15000 pcs.
Punched Carrier Taping
2 mm pitch, 10000 pcs.
Part No.
Punched CarrierTaping
4 mm pitch, 5000 pcs.
ERA3A
ERA6A
ERA8A
ERA1A
ERA2A
Resistance Value
Consist of three figures for E24 series resistance value.
The first two digits are significant figures of resistance
and the third one denotes number of zeros following.
(example) 102 : 1k Ω
● E96
Series and other Resistance values
Product Code
Metal Film
Chip Resistors
1
2
3
4
5
6
7
8
9
10
11
12
E
R
A
3
A
E
B
1
0
5
1
V
Size, Power Rating
Code Inch Power Rating
0.05 W
1A
0201
0.063 W
2A
0402
0.1 W
3A
0603
0.125 W
6A
0805
0.25 W
8A
1206
Temperature Coefficient
T.C.R.
Code
±10×10–6/°C
R
±15×10–6/°C
P
±25×10–6/°C
E
±50×10–6/°C
H
±100×10–6/°C
K
Resistance Tolerance
Code
Tolerance
W
±0.05 %
B
±0.1 %
C
±0.25 %
D
±0.5 %
Packaging Methods
Code
C
X
V
Packaging
Pressed Carrier Taping
2 mm pitch, 15000 pcs.
Punched Carrier Taping
2 mm pitch, 10000 pcs.
Part No.
Punched CarrierTaping
4 mm pitch, 5000 pcs.
ERA3A
ERA6A
ERA8A
ERA1A
ERA2A
Resistance Value
Consist of four figures for E96 series resistance value.
The first three digits are significant figures of resistance
and the fourth one denotes number of zeros following.
(example) 1051 : 1.05k Ω
note : Duplicated resistance values as E24 series part
numbers shall follow E24 part numbers.
(apply three digit resistance value)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
10 Feb. 2016
–8–
Metal Film (Thin Film) Chip Resistors, High Reliability Type
Construction
Protective coating
Dimensions in mm (not to scale)
L
a
Electrode (Inner)
W
Alumina substrate
t
b
Electrode
(Between)
High reliability
metal film
Part No.
(inch size)
ERA1A (0201)
ERA2A (0402)
ERA3A (0603)
ERA6A (0805)
ERA8A (1206)
Electrode (Outer)
L
0.60±0.03
1.00±0.10
1.60±0.20
2.00±0.20
3.20±0.20
Dimensions (mm)
W
a
b
0.30±0.03 0.15±0.05 0.15±0.05
+0.10
±0.10
0.50 –0.05 0.15
0.25±0.10
0.80±0.20 0.30±0.20 0.30±0.20
1.25±0.10 0.40±0.25 0.40±0.25
±0.25
1.60+0.05
0.50±0.25
–0.15 0.50
Mass (Weight)
[g/1000 pcs.]
t
±0.03
0.23
0.14
±0.05
0.35
0.6
±0.10
0.45
2
±0.10
0.50
4
±0.10
0.60
8
Ratings
Power Rating Limiting Element
Maximum
Resistance
T.C.R.
Part No.
(1)
(2) Part No.
Tolerance
at 85 °C
Voltage
Overload Voltage
(detail)
(×10 –6/°C)
(inch size)
(V)
(V)
(%)
(W)
ERA1AEB
±0.1
±25
ERA1AEC
±0.25
ERA1A
0.05
25
50
ERA1ARC
±0.25
(0201)
ERA1ARB
±0.1
±10
ERA1ARW ±0.05
ERA2AKD
±0.5
±100
ERA2AED
±0.5
ERA2AEC
±0.25
±25
ERA2AEB
±0.1
ERA2A
0.063
50
100
(0402)
ERA2APC
±0.25
±15
ERA2APB
±0.1
ERA2ARC
±0.25
±10
ERA2ARB
±0.1
ERA3AHD
±0.5
±50
ERA3AED
±0.5
ERA3AEC
±0.25
±25
ERA3AEB
±0.1
ERA3A
0.1
75
150
ERA3APC
±0.25
(0603)
±15
ERA3APB
±0.1
ERA3ARC ±0.25
ERA3ARB
±0.1
±10
ERA3ARW ±0.05
ERA6AHD
±0.5
±50
ERA6AED
±0.5
ERA6AEC
±0.25
±25
ERA6AEB
±0.1
ERA6A
ERA6APC
±0.25
0.125
100
200
(0805)
±15
ERA6APB
±0.1
ERA6ARC
±0.25
ERA6ARB
±0.1
±10
ERA6ARW ±0.05
ERA8AHD
±0.5
±50
ERA8AED
±0.5
ERA8AEC
±0.25
±25
ERA8AEB
±0.1
ERA8A
ERA8APC
±0.25
0.25
150
300
(1206)
±15
ERA8APB
±0.1
ERA8ARC
±0.25
ERA8ARB
±0.1
±10
ERA8ARW ±0.05
(1)
(2)
(3)
(4)
Resistance
(3)(4)
Range
(Ω)
100 to
10k (E24, E96)
100 to
10k (E24, E96)
Category
Temperature Range
(°C)
1k to 10k (E24, E96)
10 to 46.4 (E24, E96)
47 to 100k (E24, E96)
200 to
47k (E24, E96)
200 to
47k (E24, E96)
10 to 46.4 (E24, E96)
47 to 330k (E24, E96)
470 to 100k (E24, E96)
1k to 100k (E24, E96)
–55 to +155
10 to 46.4 (E24, E96)
47 to
1M (E24, E96)
470 to 100k (E24, E96)
1k to 100k (E24, E96)
10 to 46.4 (E24, E96)
47 to
1M (E24, E96)
470 to 100k (E24, E96)
1k to 100k (E24, E96)
Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Rated Power × Resistance Values, or Limiting Element Voltage listed above, whichever less.
Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 × RCWV or max. Overload Voltage listed above whichever less.
E192 series resistance values are also available. Please contact us for details.
Duplicated resistance values between E96, E192 and E24 series shall follow E24 Part Numbers. (apply three digit resistance value)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
10 Feb. 2016
–9–
Metal Film (Thin Film) Chip Resistors, High Reliability Type
Power Derating Curve
For resistors operated in ambient temperatures above
85 °C, power rating shall be derated in accordance
with the figure on the right.
Rated Load (%)
–55 °C
100
85 °C
80
60
40
20
0
–60 –40 –20
155 °C
0
20
40
60
80 100 120 140 160 180
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
10 Feb. 2016
– 10 –
Metal Film (Thin Film) Chip Resistors, High Sound Quality Type
Metal Film (Thin Film) Chip Resistors,
High Sound Quality Type
Type: ERA 2H
Features
sound quality resistor ......
Low distortion and high-quality sound by selected material and optimized structure
● High accuracy ............... Small resistance tolerance and Temperature Coefficient of Resistance
● High performance ......... Low current noise, excellent linearity
● Reference Standard ...... IEC 60115-8, JIS C 5201-8, EIAJ RC-2133B
● RoHS compliant, Pb free, Halogen free
● High
Recommended Applications
● Audio
amplifier circuit, Smartphone (Hi-fi audio), portable audio player, portable DAC amplifier
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
Product Code
Metal Film
Chip Resistors
1
2
3
4
5
6
7
8
9
10
11
12
E
R
A
2
H
E
B
1
0
0
1
X
Size, Power Rating
Code Inch Power Rating
0.063 W
2H
0402
Temperature Coefficient
T.C.R.
Code
±10×10–6/°C
R
±25×10–6/°C
E
±50×10–6/°C
H
±100×10–6/°C
K
Resistance Tolerance
Code
Tolerance
B
±0.1 %
C
±0.25 %
D
±0.5 %
Packaging Methods
Packaging
Punched Carrier Taping
2 mm pitch, 10000 pcs.
Code
X
Part No.
ERA2H
Resistance Value
Consist of four figures.
The first three digits are significant figures of resistance
and the fourth one denotes number of zeros following.
(example) 1001 : 1k Ω
Construction
Dimensions in mm (not to scale)
L
a
Protective coating
Electrode (Inner)
W
Alumina substrate
t
Electrode
(Between)
High sound quality
metal film
b
Part No.
(inch size)
Electrode (Outer)
ERA2H
(0402)
Dimensions (mm)
L
W
a
b
t
±0.10
1.00±0.10 0.50+0.10
0.25±0.10 0.35±0.05
–0.05 0.20
Mass (Weight)
[g/1000 pcs.]
0.6
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Feb. 2016
– 11 –
Metal Film (Thin Film) Chip Resistors, High Sound Quality Type
Ratings
Resistance
Range (3)
(Ω)
Power Rating Limiting Element
Maximum
Resistance
Part No.
T.C.R.
Part No.
Tolerance
at 70 °C
Voltage(1) Overload Voltage(2)
(detail)
(×10 –6/°C)
(inch size)
(W)
(V)
(V)
(%)
ERA2HKD
ERA2H
(0402)
0.063
25
50
Category
Temperature Range
(°C)
±0.5
±100
10 to 46.4 (E24, E96)
ERA2HHD
±0.5
±50
22 to 46.4 (E24, E96)
ERA2HEC
±0.25
ERA2HEB
±0.1
ERA2HRC
±0.25
ERA2HRB
±0.1
±25
–55 to +125
47 to 20k (E24, E96)
±10
(1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Rated Power × Resistance Values, or Limiting Element Voltage listed above, whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 × RCWV or max. Overload Voltage listed above whichever less.
(3) Other resistance except for E24 & E96 series values are also available. Please contact us for details.
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
–55 °C
70 °C
Rated Load (%)
100
80
60
40
20
125 °C
0
–60 –40 –20 0
20 40 60 80 100 120 140 160 180
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Feb. 2016
– 12 –
Thick Film Chip Resistors / Low Resistance Type
Thick Film Chip Resistors / Low Resistance Type
Type: ERJ 2LW, 3LW, 6LW
2BW, 3BW, 6BW,
8BW, 6CW, 8CW
ERJ 2B, 3B, 6D, 6B, 8B,
14B, 3R, 6R, 8R, 14R,
12R, 12Z, 1TR
ERJ L03, L06, L08, L14,
L12, L1D, L1W
Features
● Current
Sensing resistor
size and lightweight
● Realize both low-resistance & High-precision by original thick film resistive element & special electrode structure
● Suitable for both reflow and flow soldering
● Realize High-power by double-sided resistive elements structure that aimed
to suppress temperature rising : ERJ2LW, 3LW, 6LW, 2BW, 3BW, 6BW, 8BW, 6CW, 8CW
● Low TCR : ±75×10–6/°C (ERJ6CW, 8CW)
● Low Resistance Value
5, 6, 7, 8, 9mΩ
: ERJ6LW
5m Ω, 10m Ω
: ERJ3LW
10m Ω
: ERJ2LW
10m Ω to 50m Ω : ERJ8CW
10m Ω to 30m Ω : ERJ6CW
10m Ω to 100m Ω : ERJ6BW, 8BW
20m Ω to 100m Ω : ERJ3BW, ERJL14, L12
40m Ω to 100m Ω : ERJL1D, L1W
47m Ω to 100m Ω : ERJ2BW, ERJL03, L06, L08
● Reference Standards : IEC 60115-8, JIS C 5201-8, JEITA RC-2144
● AEC-Q200 qualified
● RoHS compliant
● Small
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
● ERJ2LW,
3LW, 6LW, 2BW, 3BW, 6BW, 8BW, 6CW, 8CW
<High power (double-sided resistive elements structure) type>
1
2
3
4
5
6
7
8
9
10
11
12
E
R
J
2
B
W
G
R
0
4
7
X
Product Code
Thick Film
Chip Resistors
Code
2LW
3LW
6LW
2BW
3BW
6BW
8BW
6CW
8CW
Inch
0402
0603
0805
0402
0603
0805
1206
0805
1206
Power Rating
0.2 W
0.25 W
0.5 W
0.25 W
0.33 W
0.5 W
1W
0.5 W
1W
Resistance Value
10m Ω
5m Ω,10m Ω
5, 6, 7, 8, 9m Ω
47m Ω to 100m Ω
20m Ω to 100m Ω
10m Ω to 100m Ω
10m Ω to 100m Ω
10m Ω to 30m Ω
10m Ω to 50m Ω
Resistance Tolerance
Code
D
F
G
J
Tolerance
± 0.5 %✽
±1%
±2%
±5%
Resistance Value
Shown by 4 digits or letters.
(Ex.) R047 : 0.047 Ω=47m Ω
✽ Please refer to the rating table
for the resistance tolerance
Code
X
V
Packaging Methods
Packaging
Part No.
Pressed Carrier Taping ERJ2LW
2 mm pitch, 10,000 pcs. ERJ2BW
ERJ3LW
ERJ6LW
Punched Carrier Taping ERJ3BW
4 mm pitch, 5,000 pcs. ERJ6BW
ERJ8BW
ERJ6CW
ERJ8CW
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
11 Feb. 2016
– 13 –
Thick Film Chip Resistors / Low Resistance Type
● ERJ2BS/2BQ,
3BS/3BQ, 6BS/6BQ, 8BS/8BQ, 14BS/14BQ, 6D, 3R, 6R, 8R, 14R, 12R, 12Z, 1TR
<High power type/Standard type>
1
2
3
4
5
6
7
8
9
10
11
E
R
J
8
R
Q
F
R
2
2
V
Product Code
Thick Film
Chip Resistors
● ERJL03,
Type
2B
3B
3R
6D
6B
6R
8B
8R
14B
14R
12R
12Z
1TR
Size, Power Rating
Inch
Power R.
0402
0.166 W
0603
0.25 W
0603
0.1 W
0805
0.5 W
0805
0.33 W
0805
0.125 W
1206
0.5 W
1206
0.25 W
1210
0.5 W
1210
0.25 W
1812
0.5 W
2010
0.5 W
2512
1W
Resistance Tolerance
Code Tolerance
D
± 0.5 %✽
±1%
F
±2%
G
±5%
J
Resistance Value
Res. Value
Code
S 0.1 Ω to 0.2 Ω
Q 0.22 Ω to 9.1 Ω✽
✽ 2B : 0.22 Ω to 1.0 Ω
Packaging Methods
Packaging
Code
X
Punched Carrier Taping
2 mm pitch, 10,000 pcs.
V
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
Part No.
ERJ2B
ERJ3B/3R
ERJ6D/6B/6R
ERJ8B/8R
ERJ14B/14R
Embossed Carrier Taping
ERJ12R
4 mm pitch, 5,000 pcs.
ERJ12Z
✽ Please refer to the
rating table for the
resistance tolerance
U
Embossed Carrier Taping
ERJ1TR
4 mm pitch, 4,000 pcs.
Resistance Value
Shown by 3 digits or letters.
(Ex.) R22 : 0.22 Ω
L06, L08, L14, L12, L1D, L1W <Low TCR type>
1
2
3
4
5
6
7
8
9
10
11
12
E
R
J
L
1
4
K
J
5
0
M
U
Product Code
Thick Film
Chip Resistors
Size, Power Rating
Type Inch Power R.
L03 0603
0.2 W
L06 0805 0.25 W
L08 1206 0.33 W
L14 1210 0.33 W
L12 1812
0.5 W
L1D 2010
0.5 W
L1W 2512
1W
Code
Packaging Methods
Packaging
Resistance Tolerance
Res. Value
Std.
✽
20m Ω, 22m Ω, 33m Ω,
K
39m Ω, 47m Ω, 50m Ω,
100m Ω
U
20m Ω to 100m Ω✽
✽ L03, L06, L08 : 47m Ω to 100m Ω
L1D, L1W : 40m Ω to 100m Ω
Code
F
J
Tolerance
±1%
±5%
Resistance Value
Shown by 3 digits or letters.
(Ex.) 50M:50m Ω, 10 C:100m Ω
Code
V
U
Part No.
ERJL03
Punched Carrier Taping
ERJL06
4 mm pitch, 5,000 pcs.
ERJL08
ERJL14
Embossed Carrier Taping
ERJL12
4 mm pitch, 5,000 pcs.
ERJL1D
Embossed Carrier Taping
ERJL1W
4 mm pitch, 3,000 pcs.
Ratings
<High power (double-sided resistive elements structure) type>
Power Rating
at 70 °C
(W)
ERJ2LW (0402)
0.2
Resistance
Tolerance
(%)
±1, ±2, ±5
ERJ3LW (0603)
0.25
±1, ±2, ±5
ERJ6LW (0805)
ERJ2BW (0402)
0.5
0.25
±1, ±2, ±5
±1, ±2, ±5
Resistance (1)
Range
(Ω)
10m
5m
10m
5, 6, 7, 8, 9m
47m to 100m (E24)
ERJ3BW (0603)
0.33
±1, ±2, ±5
20m to 100m (E24)
ERJ6BW (0805)
0.5
±1, ±2, ±5
10m to 100m (E24)
R < 15m Ω : ±300
R > 15m Ω : ±200
–55 to +155
ERJ8BW (1206)
1
±1, ±2, ±5
10m to 100m (E24)
10m Ω < R < 20m Ω : ±200
20m Ω < R < 47m Ω : ±150
47m Ω < R < 100m Ω : ±100
–55 to +155
ERJ6CW (0805)
0.5
±0.5, ±1, ±2, ±5
10m to
30m (E24)
±75
ERJ8CW (1206)
1
±1, ±2, ±5
10m to
50m (E24)
±75
Part No.
(inch size)
T.C.R.
(×10–6/°C)
0 to 500
0 to 700
0 to 300
0 to 300
±300
R < 39m Ω : ±250
R > 39m Ω : ±150
Category
Temperature Range
(°C)
–55 to +125
–55 to +125
–55 to +125
–55 to +155
–55 to +155
–55 to +155
–55 to +125
–55 to +155 (10m to 33m Ω)
–55 to +125 (36m to 50m Ω)
(1) Please contact us when resistors of irregular series are needed.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
11 Feb. 2016
– 14 –
Thick Film Chip Resistors / Low Resistance Type
Ratings
<High power type>
Part No.
(inch size)
ERJ2BS (0402)
ERJ2BQ (0402)
ERJ3BS (0603)
ERJ3BQ (0603)
ERJ6DS (0805)
ERJ6DQ (0805)
ERJ6BS (0805)
ERJ6BQ (0805)
Power Rating
at 70 °C
(W)
Resistance
Tolerance
(%)
0.166
±1, ±2, ±5
0.25
±1, ±2, ±5
0.5
±0.5, ±1,
±2, ±5
0.33
±1, ±2, ±5
ERJ8BS (1206)
ERJ8BQ (1206)
0.5
±1, ±2, ±5
ERJ14BS (1210)
ERJ14BQ (1210)
0.5
±1, ±2, ±5
Resistance (1)
Range
(Ω)
0.10 to 0.20 (E24)
0.22 to 1.0 (E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1 (E24)
0.10 to 0.20 (E24, E96)
0.22 to 9.1 (E24, E96)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1 (E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1 (E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1 (E24)
T.C.R.
(×10–6/°C)
±300
±250
±300
±200
±150
±100
±250
Category
Temperature Range
(°C)
–55 to +125
–55 to +125
–55 to +155
–55 to +125
±200
±250
–55 to +125
±200
±200
–55 to +125
±100
(1) Please contact us when resistors of irregular series are needed.
<Standard type>
Part No.
(inch size)
Power Rating
at 70 °C
(W)
Resistance
Tolerance
(%)
0.1
±1, ±2, ±5
ERJ3RS (0603)
ERJ3RQ (0603)
ERJ6RS (0805)
ERJ6RQ (0805)
0.125
±1, ±2, ±5
ERJ8RS (1206)
ERJ8RQ (1206)
0.25
±1, ±2, ±5
ERJ14RS (1210)
ERJ14RQ (1210)
0.25
±1, ±2, ±5
ERJ12RS (1812)
ERJ12RQ (1812)
0.5
±1, ±2, ±5
ERJ12ZS (2010)
ERJ12ZQ (2010)
0.5
±1, ±2, ±5
ERJ1TRS (2512)
ERJ1TRQ (2512)
1
±1, ±2, ±5
Resistance
Range
(Ω)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1
(E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1
(E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1
(E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1
(E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1
(E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1
(E24)
0.10 to 0.20 (E24)
0.22 to 0.91 (E24)
1.0 to 9.1
(E24)
T.C.R.
(×10–6/°C)
±300
Category
Temperature Range
(°C)
–55 to +125
±200
±250
–55 to +125
±200
±250
–55 to +125
±200
±200
–55 to +125
±100
±200
–55 to +125
±100
±200
–55 to +125
±100
±200
–55 to +125
±100
<Low TCR type>
Part No.
(inch size)
ERJL03
ERJL06
ERJL08
ERJL14
ERJL12
ERJL1D
ERJL1W
(0603)
(0805)
(1206)
(1210)
(1812)
(2010)
(2512)
Power Rating
at 70 °C
(W)
0.2
0.25
0.33
0.33
0.5
0.5
1
Resistance
Tolerance
(%)
±1, ±5
±1, ±5
±1, ±5
±1, ±5
±1, ±5
±1, ±5
±1, ±5
Resistance (1)
Range
(Ω)
47m to 100m
47m to 100m
47m to 100m
20m to 100m
20m to 100m
40m to 100m
40m to 100m
T.C.R.
(×10–6/°C)
±200
±100
±100
R < 47m Ω : ±300
R > 47m Ω : ±100
Category
Temperature Range
(°C)
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
–55 to +125
(1) Standard R.V. : 20m Ω, 22m Ω, 33m Ω, 39m Ω, 47m Ω, 50m Ω, 100m Ω, Custom R.V. : Each 1m Ω within upper range.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
11 Feb. 2016
– 15 –
Thick Film Chip Resistors / Low Resistance Type
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure below.
Construction
Protective coating
–55 °C
100
Electrode (Inner)
Alumina
substrate
Thick film
resistive element
Rated Load (%)
Electrode
(Between)
Electrode (Outer)
70 °C
80
60
40
155 °C
20
125 °C
0
–60 –40 –20
0
20
40
60
80 100 120 140 160 180
Ambient Temperature (°C)
Dimensions in mm (not to scale)
Part No.
(inch size)
a
W
t
Mass(Weight)
[g/1000 pcs.]
t
0.8
±0.10
ERJ2BW (0402) 1.00±0.10 0.50+0.10
0.24±0.10 0.35±0.05
–0.05 0.24
0.8
ERJ2BS
±0.10
(0402) 1.00±0.10 0.50+0.10
0.27±0.10 0.35±0.05
–0.05 0.20
ERJ2BQ
0.8
ERJ6BW (0805)
ERJ6CW
(10 to 13m Ω)
ERJ6CW
(15 to 30m Ω)
ERJ6D (0805)
ERJ6R
ERJ6B (0805)
ERJL06
ERJ8BW (1206)
ERJ8CW
(10 to 16m Ω)
ERJ8CW
(18 to 50m Ω)
ERJ8R
ERJ8B (1206)
ERJL08
ERJ14R
ERJ14B (1210)
ERJL14
ERJ12R
(1812)
ERJL12
ERJ12Z
(2010)
ERJL1D
b
Dimensions (mm)
W
a
b
±0.10
ERJ2LW (0402) 1.00±0.10 0.50+0.10
0.25±0.10 0.40±0.05
–0.05 0.25
ERJ3LW
(0603)
(5m Ω)
ERJ3LW
(10m Ω) (0603)
ERJ3BW
ERJ3R
ERJ3B (0603)
ERJL03
ERJ6LW (0805)
L
L
1.60±0.15 0.80±0.15 0.50±0.20 0.50±0.20 0.55±010
3
1.60±0.15 0.80±0.15 0.40±0.20 0.40±0.20 0.55±010
3
±0.20
1.60±0.15 0.80+0.15
0.30±0.15 0.45±0.10
–0.05 0.30
2
2.00±0.20 1.25±0.20 0.63±0.20 0.63±0.20 0.70±0.10
2.00±0.20 1.25±0.20 0.55±0.20 0.55±0.20 0.65±0.10
6
6
0.60±0.20 0.60±0.20
2.05±0.20 1.30±0.20
0.65±0.10
6
2.00±0.20 1.25±0.10 0.40±0.20 0.55±0.25 0.60±0.10
5
2.00±0.20 1.25±0.10 0.40±0.20 0.40±0.20 0.60±0.10
5
0.45±0.20 0.45±0.20
±0.20
±0.10
13
±0.10
13
±0.10
13
+0.05
±0.20
3.20+0.05
0.50±0.20 0.60±0.10
–0.20 1.60 –0.15 0.50
10
3.20±0.20 2.50±0.20 0.50±0.20 0.50±0.20 0.60±0.10
16
4.50±0.20 3.20±0.20 0.50±0.20 0.50±0.20 0.60±0.10
27
3.20
±0.20
3.20
±0.20
3.20
±0.20
5.00
±0.20
±0.20
1.60
±0.20
1.60
±0.20
1.60
±0.20
2.50
±0.20
1.00
±0.20
1.10
±0.20
0.60
±0.20
0.60
±0.20
±0.20
±0.20
1.00
±0.20
1.10
±0.20
0.60
±0.20
0.60
±0.20
0.65
0.65
0.65
±0.10
27
±0.10
45
0.60
6.40
3.20
0.65
0.60
0.60
ERJ1TR
(2512)
ERJL1W
±0.20
±0.20
±0.20
±0.20
6.40
3.20
0.65
1.30
1.10±0.10
79
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
11 Feb. 2016
– 16 –
Current Sensing Resistors, Metal Plate Type
Current Sensing Resistors,
Metal Plate Type
Type: ERJ MP2, MP3, MP4
Features
● Ideal for current sensing solution
● Small case size with high power
● Metal plate bonding technology. Excellent long term stability
● Outer Resin with high heat dissipation. Wide temperature range
● AEC-Q200 qualified
● RoHS compliant
● ISO9001, ISO/TS16949 certified
(−65 °C to +170 °C)
■ As for Packaging Methods, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
12
E
R
J
M
P
4
P
F
1
0
M
U
Product Code
Metal Plate
Chip Resistors
Type Code
Code Inch size
1206
P2
2010
P3
2512
P4
Power Rating
Code Rating
K
0.5 W
M
1W
P
2W
Q
3W
Resistance Tolerance
Code Tolerance
±1 %
F
Resistance Value
Shown by 3 digits or
letters.Decimal point
is expressed by M as
2M0=2m Ω
10M=10m Ω
Code
U
Packaging Methods
Packaging
Embossed Carrier Taping
4 mm pitch, 3,000 pcs.
Embossed Carrier Taping
4 mm pitch, 2,000 pcs.
Part No.
ERJMP2
ERJMP3
ERJMP4
Ratings
Part No.
(inch size)
ERJMP2K (1206)
ERJMP2M (1206)
ERJMP3K (2010)
ERJMP3M (2010)
ERJMP3P (2010)
ERJMP4M (2512)
ERJMP4P (2512)
ERJMP4Q (2512)
Power Rating
at 70 °C
(W)
0.5
1
0.5
1
2
1
2
3
Resistance
Range✽1
(mΩ)
1 to 50
1 to 33
1 to 50
1 to 33
1 to 10
1 to 50
1 to 33
1 to 5
Resistance
Tolerance
(%)
T.C.R.✽2
(×10–6/°C)
Category
Temperature Range
(°C)
F : ±1
±75
–65 to +170
F : ±1
±75
–65 to +170
F : ±1
±75
–65 to +170
✽1 Regular resistance : 1m Ω, 2m Ω, 3m Ω, 5m Ω, 10m Ω, 15m Ω, 20m Ω, 22m Ω, 25m Ω, 30m Ω, 33m Ω, 50m Ω
Please contact us when resistors of irregular series are needed.
✽2 Please contact us when T.C.R. assurance within ±50×10-6/°C is needed.
120
Rated Power (%)
Power Derating Curve
If the ambient temperature of the resistor is more than
ambient temperature upper limit value of the rated
table, please reduce the rated power according to the
Power Derating Curve shown in the figure on the right.
100
−65 °C
70 °C
80
60
40
20
0
–80
170 °C
–40
0
40
80
120
160
200
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2016
– 17 –
Current Sensing Resistors, Metal Plate Type
Construction
Insulator
Resistive Element (Metal Plate)
Surfase Treatment (Ni/Sn)
Protective Resin
Electrode (Metal)
Dimensions in mm (not to scale), Recommended Land Pattern
t
W
b
A
c
L
a
Land Pattern
Part No.
(inch size)
ERJMP2
(1206)
ERJMP3
(2010)
ERJMP4
(2512)
Dimension (mm)
Resistance
Value (Ω)
1m
2m
3m to 5m
6m to 50m
1m
2m to 6m
7m to 50m
1m
2m to 4m
5m, 6m
7m to 50m
L
W
Recommended Land Pattern (mm)
A
t
1.04±0.25
0.90±0.25
3.20±0.25 1.60±0.25 0.64±0.25
0.50±0.25
5.00±0.25 2.50±0.25
1.47±0.25
0.50±0.25
2.20±0.25
6.40±0.25 3.20±0.25
0.64±0.25
0.90±0.25
0.64±0.25
a
b
c
1.5
1.8
1.0
1.1
1.8
1.8
2.1
3.1
1.9
1.3
3.1
3.5
3.0
3.4
2.0
2.0
3.4
4.0
Mass (Weight)
(g/1000 pcs.)
30
70
0.90±0.25
1.20±0.25 0.64±0.25
0.76±0.25
100
Change of Resistance (%)
Typical Temperature dependence of electrical resistance
1
0.5
0
–0.5
–1
–80 –60 –40 –20 0
20 40 60 80 100 120 140 160 180
Temperature (°C)
Long-term stability
● Load
● Thermal
Life 70 °C, Rated power
ERJMP2KF5M0U
Shock −55 °C/155 °C
ERJMP4PF5M0U
ERJMP2KF5M0U
1
0.5
0
–0.5
–1
0
1000
2000
3000
Test Time (hrs)
ERJMP4PF5M0U
ERJMP3MF5M0U
Change of Resistance (%)
Change of Resistance (%)
ERJMP3MF5M0U
4000
1
0.5
0
–0.5
–1
0
1000
2000
3000
Test Time (hrs)
4000
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2016
– 18 –
Current Sensing Resistors, Metal Plate Type
Maximum pulse energy respectively pulse power for continuous operation
Referance Data
Condition : Room Temperature, OFF : 10 s, 1000 cycle, Wave form : Square
Change of Resistance=±1 %
type
1000
100
100
10
10
1
ERJMP2 1m Ω
ERJMP2 5m Ω
ERJMP2 10m Ω
0.1
1
0.01
0.1
ERJMP2 33m Ω
ERJMP2 50m Ω
0.01
0.001
0.001
0.0001
● ERJMP3
Power (W)
Pulse Energy (J)
● ERJMP2
0.001
0.01
Pulse width (s)
0.1
1
0.0001
10
type
1000
100
100
10
1
ERJMP3 5m Ω
ERJMP3 10m Ω
0.1
1
ERJMP3 50m Ω
0.1
0.01
ERJMP3 33m Ω
0.01
0.001
0.001
0.0001
● ERJMP4
Power (W)
Pulse Energy (J)
ERJMP3 1m Ω
10
0.001
0.01
Pulse width (s)
0.1
1
0.0001
10
type
1000
100
100
10
ERJMP4 5m Ω
1
ERJMP4 10m Ω
0.1
1
0.1
ERJMP4 33m Ω
ERJMP4 50m Ω
0.01
0.01
0.001
0.0001
Power (W)
Pulse Energy (J)
ERJMP4 1m Ω
10
0.001
0.001
0.01
Pulse width (s)
0.1
1
0.0001
10
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2016
– 19 –
Current Sensing Resistors, Metal Plate Type
Performance (AEC-Q200)
Test Item
Test Condition
Thermal Shock
−55 °C/155 °C, 1000cycles
Overload
3 × Rated Power, 5 sec
Solderability
245 °C, 3 sec
Specification
Typical value
±1 %
0.20 %
±0.5 %
0.10 %
> 95% coverage > 95% coverage
Resistance to Solvents
MIL-STD-202 method 215, 2.1a, 2.1d
Low Temperature Storage and Operation
−65 °C, 24 h
No damage
No damage
±0.5 %
0.03 %
Resistance to Soldering Heat
MIL-STD-202 method 210 (260 °C, 10s)
±0.5 %
0.10 %
Moisture Resistance
MIL-STD-202 method 106
±0.5 %
0.10 %
Shock
MIL-STD-202 method 213-A
±0.5 %
0.10 %
Vibration, High Frequency
10 to 2000 (Hz)
±0.5 %
0.05 %
Life
70 °C, Rated Power, 2000 h
±1 %
0.30 %
Storage Life at Elevated Temperature
170 °C, 2000 h
±1 %
0.30 %
High Temperature Characteristics
140 °C, 2000 h
±0.5 %
0.05 %
Frequency Characteristics
Inductance
< 5 nH
< 2 nH
Sense terminal-Layout
Land
Sense terminal
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2016
– 20 –
Current Sensing Resistors, Metal Plate Type
Current Sensing Resistors,
Metal Plate Type
Type: ERJ MS4, MS6, MB1
Features
● Ideal
for current sensing solution
case size with high power
● Metal plate bonding technology. Excellent long term stability
● Outer Resin with high heat dissipation. Wide temperature range (-65 °C to +170 °C)
● AEC-Q200 qualified
● RoHS compliant
● ISO9001, ISO/TS16949 certified
● Small
■ As for Packaging Methods, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
12
E
R
J
M
S
4
S
F
2
M
0
U
Product Code
Metal Plate
Chip Resistors
Type Code
Code Inch size Electrode type
Standard
S4S
2512
Narrow
S4H
2512
Standard
S6S
2526
Standard
B1S
1020
Resistance Tolerance
Code Tolerance
±1 %
F
Resistance Value
Shown by 3 digits or
letters.Decimal point
is expressed by M as
2.0m Ω=2M0,
0.5m Ω=M50,
10.0m Ω=10M
Code
U
Packaging Methods
Packaging
Embossed Carrier Taping
4 mm pitch, 2,000 pcs.
Embossed Carrier Taping
8 mm pitch, 1,000 pcs.
Embossed Carrier Taping
4 mm pitch, 2,000 pcs.
Part No.
ERJMS4
ERJMS6
ERJMB1
Ratings
Part No.
(inch size)
Power Rating
at 70 °C
(W)
Resistance
Range
(mΩ)
Resistance
Tolerance
(%)
T.C.R.
(×10–6/°C)
ERJMS4S
(2512)
3
1, 2, 3, 4
F : ±1
±75
–65 to +170
130
ERJMS4H
(2512)
3
2
5, 6
7, 8, 9, 10
F : ±1
F : ±1
±75
±75
–65 to +170
–65 to +170
130
100
ERJMS6S
(2526)
ERJMB1S
(1020)
5
0.5, 1, 2
F : ±1
±75
–65 to +170
130
2
1, 2, 3, 4, 5
F : ±1
±75
–65 to +170
130
Category
Terminal temp.
Temperature Range
upper limit
(°C)
(°C)
✽ Please contact us when resistors of irregular series are needed.
<Supplemented>
In the case of the temperature measurement of the terminal portion of
the resistor, Please perform under the following conditions.
1) Tarminal temperature measurement, please apply the temperature of
the higher of either the left or right electrode upper surface of the
resistor.
2) Please measure the temperature of the resistor in the land pattern
printed of circuit board and plan to use by real conditions.
120
100
Rated Load (%)
Power Derating Curve
If the terminal temperature of the resistor is more than
terminal temperature upper limit value of the rated
table, please reduce the rated power according to the
Power Derating Curve shown in the figure on the right.
−65 °C
100 °C
130 °C
80
60
ERJMS4H
(7 to 10m Ω)
40
20
0
–80
170 °C
–40
0
40
80
120
160
200
Terminal Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
– 21 –
Jun. 2016
Current Sensing Resistors, Metal Plate Type
Construction
Protective Film
Surface Treatment (Ni/Sn)
Electrode (Metal)
Resistive Element (Metal Plate)
Dimensions in mm (not to scale), Recommended Land Pattern
● ERJMS4S/ERJMS4H
● ERJMS6S
● ERJMB1S
t
t
t
W
W
W
A
A
L
L
L
b
b
c
A
a
c
b
a
c
a
Land Pattern
Part No.
(inch size)
ERJMS4S
(2512)
ERJMS4H
(2512)
ERJMS6S
(2526)
ERJMB1S
(1020)
Dimension (mm)
Recommended Land Pattern (mm)
L
W
A
t
a
b
c
Mass (Weight)
(g/1000 pcs.)
6.40±0.25
3.20±0.25
2.20±0.25
1.20±0.15
2.7
3.4
2.0
120
6.40±0.25
3.20±0.25
1.25±0.25
1.20±0.15
1.7
3.4
4.0
115
6.40±0.25
6.80±0.25
2.20±0.25
1.20±0.15
2.7
7.0
2.0
260
2.55±0.25
5.00±0.25
0.68+0.15
−0.20
0.90±0.15
1.15
5.5
1.1
40
Long-term stability
1
Change of Resistance (%)
Change of Resistance (%)
Typical Temperature dependence of electrical resistance
0.5
0
–0.5
–1
–80 –60 –40 –20 0
1
ERJMS4SF2M0U 140 °C Storage
0.5
0
–0.5
–1
0
20 40 60 80 100 120 140 160 180
Temperature (°C)
2000
4000
6000
Test Time (hrs)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
– 22 –
8000
Jun. 2016
Current Sensing Resistors, Metal Plate Type
Maximum pulse energy respectively pulse power for continuous operation
Referance Data
Condition : Room Temperature, OFF : 10 s, 1000 cycle, Wave form : Square
Change of Resistance=±1 %
● ERJMS4
type
1000
100
100
10
1
ERJMS4H 5m Ω
0.1
1
0.1
0.01
ERJMS4H 10m Ω
0.01
0.001
0.001
0.0001
● ERJMS6
Power (W)
Pulse Energy (J)
ERJMS4S 1m Ω
10
0.001
0.01
Pulse width (s)
0.1
1
0.0001
10
type
100
10000
ERJMS6S 0.5m Ω
ERJMS6S 1m Ω
10
ERJMS6S 3m Ω
10
0.1
1
0.01
0.1
0.001
0.0001
0.01
0.0001
● ERJMB1
Pulse Energy (J)
Power (W)
1
100
0.001
0.01
Pulse width (s)
0.1
1
type
1000
100
100
10
10
1
1
0.1
ERJMB1S 1m Ω
0.1
ERJMB1S 3m Ω
0.01
ERJMB1S 5m Ω
0.01
0.001
0.0001
Power (W)
Pulse Energy (J)
1000
0.001
0.001
0.01
Pulse width (s)
0.1
1
0.0001
10
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
– 23 –
Jun. 2016
Current Sensing Resistors, Metal Plate Type
Performance (AEC-Q200)
● ERJMS4,
ERJMS6 type
Test Item
Thermal Shock
Overload
Solderability
Resistance to Solvents
Low Temperature Storage and Operation
Resistance to Soldering Heat
Moisture Resistance
Shock
Vibration, High Frequency
Life
Storage Life at Elevated Temperature
High Temperature Characteristics
Frequency Characteristics
● ERJMB1
Test Condition
Specification
Typical value
±1 %
0.20 %
±0.5 %
0.10 %
> 95% coverage > 95% coverage
No damage
No damage
±0.5 %
0.03 %
±0.5 %
0.10 %
±0.5 %
0.10 %
±0.5 %
0.10 %
±0.5 %
0.05 %
±1 %
0.30 %
±1 %
0.30 %
±0.5 %
0.05 %
< 5 nH
< 2 nH
−55 °C/155 °C, 1000cycles
3 × Rated Power, 5 sec
245 °C, 3 sec
MIL-STD-202 method 215, 2.1a, 2.1d
−65 °C, 24 h
MIL-STD-202 method 210 (260 °C, 10s)
MIL-STD-202 method 106
MIL-STD-202 method 213-A
10 to 2000 (Hz)
70 °C, Rated Power, 2000 h
170 °C, 2000 h
140 °C, 2000 h
Inductance
type
Test Item
Thermal Shock
Overload
Solderability
Resistance to Solvents
Low Temperature Storage and Operation
Resistance to Soldering Heat
Moisture Resistance
Shock
Vibration, High Frequency
Life
Storage Life at Elevated Temperature
High Temperature Characteristics
Frequency Characteristics
Test Condition
−55 °C/155 °C, 1000cycles
2.5 × Rated Power, 5 sec
245 °C, 3 sec
MIL-STD-202 method 215, 2.1a, 2.1d
−65 °C, 24 h
MIL-STD-202 method 210 (260 °C, 10s)
MIL-STD-202 method 106
MIL-STD-202 method 213-A
10 to 2000 (Hz)
70 °C, Rated Power, 2000 h
170 °C, 2000 h
140 °C, 2000 h
Inductance
Specification
Typical value
±1 %
±1 %
0.30 %
0.30 %
> 95% coverage > 95% coverage
No damage
No damage
±0.5 %
±0.5 %
±0.5 %
±0.5 %
±0.5 %
±1 %
±1 %
±0.5 %
< 5 nH
0.03 %
0.10 %
0.10 %
0.10 %
0.05 %
0.30 %
0.30 %
0.05 %
< 2 nH
Temperature Rise
● ERJMS4HF5M0U
● ERJMS6SF2M0U
● ERJMB1SF3M0U
90
70
80
80
70
60
50
40
30
20
10
Temperature Rise (°C)
80
90
Temperature Rise (°C)
100
温度上昇 (°C)
100
70
60
50
40
30
20
0
1
2
40
30
20
0
3
0
1
2
<Condition>
Base material : FR-4 (t1.6mm)
Copper Thickness : 70 µm, Two layer
電力 (W)
50
10
10
0
0
60
1
2
3
Power (W)
4
0
5
Resistor
1
Power (W)
1
2
2
Soldering
PWB
Sense terminal-Layout
Land
Sense terminal
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
03
– 24 –
Jun. 2016
Current Sensing Resistors, Metal Plate Type
Current Sensing Resistors,
Metal Plate Type
Type: ERJM1W
Features
● Low
resistance values and high precision (1 mΩ to 20 mΩ)
resistance not influenced by measurement position
● High heat emission
● Low profile, strong body
● Inductance less than 1.0 nH for the metal plate structure
● RoHS compliant
● Stable
■ As for Packaging Methods, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
12
E
R
J
M
1
W
S
F
3
M
0
U
Product Code
Thick Film
Chip Resistors
Size, Power Rating
Code Inch Power R.
M1W 2512
1W
Type
Code
S General type
T Wide terminal type
Packaging Methods
Packaging
Embossed Carrier Taping
U
4 mm pitch, 3,000 pcs.
Resistance Tolerance
Code
F
J
Tolerance
±1%
±5%
Code
Resistance Value
Shown by 3 digits or letters.
Decimal point is expressed by M as 3 mΩ=3M0, 10 mΩ=10M
Ratings
Part No. Power Rating
Standard
(inch size) at 70 °C (W) Resistance (mΩ)
ERJM1WS
(2512)
1
ERJM1WT
(2512)
Resistance
Tolerance (%)
3, 4
±350
5, 6, 10, 15, 20
±100
1, 1.5
Category
Temperature
Range (°C)
T.C.R.
-6
(×10 /°C)
F: ±1, J: ±5
You should use the
–55 to +170
350±100
2, 3, 4
Circuit board of use
aluminum substrate
when the added
wattage exceeds 0.5 W.
100±50
✽ Please contact the factory for other values and the range
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
120
Rated Load (%)
100
70 °C
80
60
40
20
0
–55 –40
170 °C
155 °C
0
40
80
120
160
200
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
08
– 25 –
Oct. 2014
Current Sensing Resistors, Metal Plate Type
Construction
Dimensions in mm (not to scale)
T
a
W
L
Terminal; Plated Metal
Resistive Body; Alloy Plate
Protective coating; Resin
Type
Part No.
(inch size)
Dimensions (mm)
L
W
T
a
ERJM1WS
6.40±0.25
1.00±0.25
(2512)
3.20±0.25 0.80±0.30
ERJM1WT
T Type
6.40±0.40
2.10±0.30
(2512)
S Type
Mass (Weight)
[g/1000 pcs.]
70
90
Recommended Land Pattern
● An
example of a land pattern
a
b
Wiring pattern
(copper trace)
Land pattern
Part No.
Solder resist
ERJM1WS
ERJM1WT
c
a
2.1
3.1
Dimensions (mm)
b
3.4
3.4
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
08
– 26 –
c
4.2
2.2
Oct. 2014
High Power Chip Resistors / Wide Terminal Type
High Power Chip Resistors /
Wide Terminal Type
Type: ERJ A1, B1, B2, B3
Features
● High solder-joint reliability by wide terminal construction
● Excellent heat dissipation characteristics by wide terminal
● AEC-Q200 qualified
● RoHS compliant
construction
Recommended Applications
● Automotive electronic circuits including ECUs (Electrical control unit), anti-lock breaking systems and air-bag systems
● Current sensing for power supply circuits in a variety of equipment
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
Product Code
Thick Film
Chip Resistors
1
2
3
4
5
6
7
8
9
10
11
E
R
J
A
1
A
J
1
0
2
U
Size, Power Rating
Code Inch Power R.
1.33 W
A1 1225
1 W,
B1 1020
2W
R < 10 Ω
0.75 W,
1W
B2 0612
R < 10 Ω
0.33 W,
0.5 W
B3 0508
R<1Ω
(
)
(
)
(
)
Resistance Value Region
A 10 Ω < R
B 0.22 Ω < R <10 Ω
C 0.01 Ω < R < 0.22 Ω
D 0.005 Ω < R < 0.01 Ω
Resistance Tolerance
F
±1%
G
±2%
J
±5%
Code
V
U
Resistance Value
Shown by 3 digits or letters. Only when it is impossible,
shown by 4 digits or letters.
(Ex.) 102 : 1.0 kΩ
R01 : 0.01 Ω = 10 mΩ
4R7 : 4.7 Ω
R015 : 0.015 Ω = 15 mΩ
Packaging Methods
Packaging
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
Part No.
ERJB2
ERJB3
Embossed Carrier Taping
ERJB1
4 mm pitch, 5,000 pcs.
Embossed Carrier Taping
ERJA1
4 mm pitch, 4,000 pcs.
Ratings
Part No.
(inch size)
ERJA1
(1225)
ERJB1
(1020)
ERJB2
(0612)
ERJB3
(0508)
Limiting
Power
Element
(1)
Rating
Voltage
at 70 °C (W)
(V)
1.33
200
Maximum
Resistance
Resistance
Category
T.C.R.
Overload
(2)
–6
Tolerance
Range
Temperature Range
(×10 /°C)
Voltage
(Ω)
(°C)
(%)
(V)
±1
100 m to 10 k (E24) R < 100 mΩ : ±350
100 mΩ < R : ±100 (±1%)
400
–55 to +155
±2, ±5
10 m to 10 k (E24)
±200 (±2%, ±5%)
1
2(R < 10 Ω)
200
400
0.75
1(R < 10 Ω)
200
400
0.33
0.5(R < 1 Ω)
150
200
R < 22 mΩ : ±350
22 mΩ < R < 47 mΩ : ±200
47 mΩ < R < 100 mΩ : ±150 (±1%)
±1, ±2, ±5 10 m to 10 k (E24)
–55 to +155
±200 (±2%, ±5%)
100 mΩ < R : ±100 (±1%)
±200 (±2%, ±5%)
±1, ±2
10 m to 1 M (E24) R < 22 mΩ : 0 to +300
22 mΩ < R < 47 mΩ : 0 to +200
47 mΩ < R < 100 mΩ : 0 to +150
5 m to 1 M
–55 to +155
100 mΩ < R < 220 mΩ : 0 to +150 (±1%)
5 m to 9 m : 1mΩ step
±5
0 to +200 (±2%, ±5%)
10 m to 1 M : E24
220 mΩ < R :
±100 (±1%)
±200 (±2%, ±5%)
R < 47 mΩ : 0 to +300
47 mΩ < R < 1 Ω : 0 to +200
±1, ±2, ±5 20 m to 10 (E24)
–55 to +155
1 Ω < R : ±100 (±1%)
±200 (±2%, ±5%)
(
)
(1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Values, or Limiting Element Voltage listed above, whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 × RCWV or max. Overload Voltage listed above whichever less.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06
– 27 –
Apr. 2015
High Power Chip Resistors / Wide Terminal Type
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure below.
Rated Load (%)
Construction (Example : ERJA1 type)
Protective coating
Electrode (Outer)
Thick film
Alumina substrate
resistive element
Electrode (Inner) Electrode (Between)
100
70 °C
–55 °C
80
60
40
20
155 °C
0
–60 –40 –20 0
20 40 60 80 100 120 140 160 180
Ambient Temperature (°C)
Dimensions in mm (not to scale)
ERJB2 type
W
T
L
a a
Rl0
T
W
T
b
P
W
B1 B1
102
( 10 mΩ < R < 1 MΩ )
( R< 10 mΩ )
L
A1
L
10–fD
aa
ERJA1 type
b
B2 C B2
b b
A2
Mass (Weight) [1000 pcs.] : 40 g
Mass (Weight) [1000 pcs.] : 11 g
L
W
T
A1
B1
Dimensions
(mm) 3.20±0.20 6.40±0.20 0.55±0.10 0.70±0.20 0.45±0.20
A2
B2
P
C
0D
Dimensions
(mm) 0.70±0.20 1.25±0.15 1.27±0.10 0.30+0.10
–0.20 0.4 min.
Dimensions (mm)
L
W
T
a
b
0.65±0.15
0.30±0.20
5 mΩ<R<10 mΩ
0.30±0.20
10 mΩ<R<220 mΩ 1.60±0.15 3.20±0.20
0.55±0.15
0.50±0.20
220 mΩ<R<1 MΩ
0.25±0.20
ERJB1 type
ERJB3 type
W
W
L
L
aa
a
T
b
b
b
b
a
l03
T
Mass (Weight) [1000 pcs.] : 27 g
Mass (Weight) [1000 pcs.] : 4.8 g
L
W
T
a
b
Dimensions
(mm) 2.50±0.20 5.00±0.20 0.55±0.20 0.25±0.20 0.90±0.20
L
W
T
a
b
Dimensions
(mm) 1.25±0.10 2.00±0.15 0.50±0.10 0.25±0.20 0.40±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06
– 28 –
Apr. 2015
High Power Chip Resistors / Wide Terminal Type
Circuit Configuration
ERJA1 type
R
R
R
ERJB1 type
R
R
R
R
R
ERJB3 type
R
R
ERJB2 type
< Less than 10 mΩ >
R
R
R
R
< Low resistance zone >
R
R
< High resistance zone >
R
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06
– 29 –
Apr. 2015
High Precision Thick Film Chip Resistors
High Precision
Thick Film Chip Resistors
Type: ERJ PB3, PB6
Features
● Achieve
the resistance tolerance ±0.1 % with high reliability metal glaze thick film resistor
the temperature coefficient of Resistance ±50×10−6/°C in high resistance range up to 1M Ω
● Suitable for both reflow and flow soldering
● High power … 0.20 W : 0603 inch / 1608 mm size (ERJPB3)
0.25 W : 0805 inch / 2012 mm size (ERJPB6)
● Reference Standards… IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B
● AEC-Q200 qualified
● RoHS compliant
● Guarantee
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
12
E
R
J
P
B
6
B
1
0
0
2
V
Size, Power Rating
Product Code
Thick Film
Code Inch Power R.
Chip Resistors PB3 0603 0.20 W
PB6 0805 0.25 W
Resistance Tolerance
Code Tolerance
B
± 0.1 %
D
± 0.5 %
Construction
Protective coating
Packaging Methods
Resistance Value
Packaging
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
Code
The first three digits are significant figures of
resistance and the last one denotes number of
zeros following.
Example : 5110 → 511 Ω
: 1003 → 100k Ω
V
Part No.
ERJPB3
ERJPB6
Dimensions in mm (not to scale)
Electrode (Inner)
L
a
Alumina substrate
W
t
Electrode
(Between)
b
Part No.
(inch size)
Thick film
resistive element
ERJPB3
(0603)
ERJPB6
(0805)
Electrode (Outer)
Dimensions (mm)
L
W
a
b
Mass (Weight)
[g/1000 pcs.]
t
1.60±0.15 0.80+0.15
0.15+0.15
0.25±0.10 0.45±0.10
–0.10
–0.05
2.00
±0.20
±0.10
1.25
±0.20
0.25
0.40
±0.20
±0.10
0.60
2
4
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Feb. 2016
– 30 –
High Precision Thick Film Chip Resistors
Ratings
(3)
Part No.
(inch size)
Power Rating
at 70 °C
(W)
Limiting
Element
(1)
Voltage
(V)
Maximum
Overload
(2)
Voltage
(V)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
–6
(×10 /°C)
Category
Temperature
Range (°C)
ERJPB3
(0603)
0.20
150
200
±0.1
±0.5
200 to 100k
(E24, E96)
±50
–55 to +155
ERJPB6
(0805)
0.25
150
200
±0.1
±0.5
200 to 1M
(E24, E96)
±50
–55 to +155
(1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Values, or Limiting Element Voltage listed above, whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 × RCWV or max. Overload Voltage listed above whichever less.
(3) Use it on the condition that the case temperature is below 155 °C.
Rated Load (%)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance with
the figure on the right.
100
70 °C
–55 °C
80
60
40
20
155 °C
0
–60 –40 –20 0
20 40 60 80 100 120 140 160 180
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Feb. 2016
– 31 –
Anti-Surge Thick Film Chip Resistors
Anti-Surge Thick Film Chip Resistors
Type: ERJ PA2, P03, PA3, P06, P08, P14
Features
● ESD
surge characteristics superior to standard metal film resistors
reliability
Metal glaze thick film resistive element and three layers of electrodes
● Suitable for both reflow and flow soldering
● High power … 0.20 W : 0402 inch / 1005 mm size (ERJPA2), 0603 inch / 1608 mm size (ERJP03)
0.25 W : 0603 inch / 1608 mm size (ERJPA3)
0.50 W : 0805 inch / 2012 mm size (ERJP06), 1210 inch / 3225 mm size (ERJP14)
0.66 W : 1206 inch / 3216 mm size (ERJP08)
● Reference Standards… IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B
● AEC-Q200 qualified
● RoHS compliant
● High
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
12
E
R
J
P
0
6
D
1
0
0
2
V
Size, Power Rating
Product Code
Thick Film
Code Inch Power R.
Chip Resistors PA2 0402 0.20 W
P03 0603 0.20 W
PA3 0603 0.25 W
P06 0805 0.50 W
P08 1206 0.66 W
P14 1210 0.50 W
Resistance Tolerance
Resistance Value
Code Tolerance
D
± 0.5 %
F
±1%
J
±5%
The first two or three digits are significant figures
of resistance and the third or 4th one denotes
number of zeros following.
Three digit type (±5 %),
four digit type (±1 %, ±0.5 %)
Example: 222→2.2k Ω, 1002→10k Ω
Construction
Packaging Methods
Packaging
Punched Carrier Taping
2 mm pitch, 10,000 pcs.
Code
X
Part No.
ERJPA2
ERJP03
ERJPA3
ERJP06
ERJP08
V
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
U
Embossed Carrier Taping
ERJP14
4 mm pitch, 5,000 pcs.
Dimensions in mm (not to scale)
L
a
Protective coating
Electrode (Inner)
W
Alumina substrate
t
b
Electrode
(Between)
Thick film
resistive element
Part No.
(inch size)
ERJPA2
(0402)
ERJP03
(0603)
ERJPA3
(0603)
ERJP06
(0805)
ERJP08
(1206)
ERJP14
(1210)
Electrode (Outer)
Dimensions (mm)
L
W
a
b
Mass (Weight)
[g/1000 pcs.]
t
1.00±0.05 0.50±0.05 0.20±0.15 0.25±0.05 0.35±0.05
1.60
±0.15
1.60
±0.15
2.00
±0.20
+0.05
+0.15
–0.05
0.80
+0.15
–0.05
0.80
±0.10
1.25
+0.15
–0.10
0.15
+0.15
–0.10
0.15
±0.20
0.25
±0.15
0.30
±0.10
0.25
0.40
±0.20
0.8
±0.10
2
±0.10
2
0.45
0.45
±0.10
0.60
+0.05
4
3.20 –0.20 1.60 –0.15 0.40±0.20 0.50±0.20 0.60±0.10
10
3.20±0.20 2.50±0.20 0.35±0.20 0.50±0.20 0.60±0.10
16
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
10 Feb. 2016
– 32 –
Anti-Surge Thick Film Chip Resistors
Ratings
(3)
Part No.
(inch size)
ERJPA2
(0402)
ERJP03
(0603)
Power Rating
at 70 °C
(W)
0.20
0.20
Limiting
Element
(1)
Voltage
(V)
Maximum
Overload
(2)
Voltage
(V)
50
100
150
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
–6
(×10 /°C)
±0.5, ±1
10 to 1M (E24, E96)
±100
±5
10 to 1M (E24)
±200
±0.5
10 to 1M (E24, E96)
±150
±1
10 to 1M (E24, E96)
200
±5
ERJPA3
(0603)
0.25
150
200
ERJP06
(0805)
0.50
400
600
ERJP08
(1206)
0.66
500
1000
ERJP14
(1210)
0.50
200
400
±0.5, ±1
±200
R < 10 Ω : –150 to +400
1 to 1M (E24)
10 Ω < R : ±200
10 to 1M (E24, E96)
±100
±5
1 to 1.5M (E24)
±0.5, ±1
10 to 1M (E24, E96)
±5
1 to 3.3M (E24)
±0.5, ±1
10 to 1M (E24, E96)
±5
1 to 10M (E24)
±0.5, ±1
10 to 1M (E24, E96)
±5
1 to 1M (E24)
±200
R < 33 Ω : ±300
33 Ω < R : ±100
R < 10 Ω : –100 to +600
10 Ω < R < 33 Ω : ±300
33 Ω < R : ±200
±100
R < 10 Ω : –100 to +600
10 Ω < R : ±200
±100
R < 10 Ω : –100 to +600
10 Ω < R : ±200
Category
Temperature
Range (°C)
–55 to +155
–55 to +155
–55 to +155
–55 to +155
–55 to +155
–55 to +155
(1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Values, or Limiting Element Voltage listed above, whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 × RCWV or max. Overload Voltage listed above whichever less.
(3) Use it on the condition that the case temperature is below 155 °C.
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance with
the figure on the right.
✽ When the temperature of ERJP14 is 155 °C or less, the
derating start temperature can be changed to 125 °C. (See
the dotted line)
Rated Load (%)
–55 °C
100
70 °C
125 °C
80
ERJ P06,
P08
60
40
20
0
–60 –40 –20
ERJ PA2, P03,
PA3, P14
155 °C
0 20 40 60 80 100 120 140 160 180
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
10 Feb. 2016
– 33 –
Anti-Surge Thick Film Chip Resistors
ESD Characteristic
R=0 Ω(< 1.5k Ω)/150 Ω(> 1.5k Ω)
E
C=150p F
Sample
0402 inch size
: E=±1k V
0603, 0805, 1206, 1210 inch size : E=±3k V
ERJPA2 (0402 inch /1005 mm size)
-5%
ERJ2G
-10%
-15%
-20%
10 Ω
100 Ω
1k Ω
10k Ω 100k Ω
1M Ω
ERJP06
-5%
-10%
ERJ6G
-15%
-20%
-25%
-30%
10 Ω
100 Ω
1k Ω
10k Ω 100k Ω
1M Ω
ERJPA3
ERJP03
-5%
-10%
-15%
-20%
5%
0%
ERJP03, PA3 (0603 inch /1608 mm size)
0%
-25%
-30%
ERJP06 (0805 inch / 2012 mm size)
5%
Change Ratio of
Resistance Value
Change Ratio of
Resistance Value
0%
-25%
-30%
ERJ3G
10 Ω
100 Ω
1k Ω
10k Ω 100k Ω 1M Ω
ERJP08 (1206 inch / 3216 mm size)
ERJP08
0%
-5%
ERJ8G
-10%
-15%
-20%
-25%
-30%
10 Ω
100 Ω
1k Ω
10k Ω
100k Ω 1M Ω
ERJP14 (1210 inch / 3225 mm size)
5%
Change Ratio of
Resistance Value
5%
ERJPA2
Change Ratio of
Resistance Value
Change Ratio of
Resistance Value
5%
Anti-Surge Thick Film Chip Resistors(ERJP Type)
Thick Film Chip Resistors(ERJ Type)
ERJP14
0%
-5%
ERJ14
-10%
-15%
-20%
-25%
-30%
10 Ω
100 Ω
1k Ω
10k Ω 100k Ω
1M Ω
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
10 Feb. 2016
– 34 –
Anti-Pulse Thick Film Chip Resistors
Anti-Pulse
Thick Film Chip Resistors
Type: ERJ T06, T08, T14
ERJ T14L
Features
● Anti-Pulse
characteristics
High pulse characteristics achieved by the optimized trimming specifications (ERJT06, T08, T14)
● Further high pulse characteristics achieved by trimming-less specifications (ERJT14L)
● High reliability
Metal glaze thick film resistive element and three layers of electrodes
● Suitable for both reflow and flow soldering
● High power … 0.25W : 0805 inch / 2012 mm size (ERJT06)
0.33W : 1206 inch / 3216 mm size (ERJT08)
0.50W : 1210 inch / 3225 mm size (ERJT14, ERJT14L)
● Reference Standards…IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B
● AEC-Q200 qualified
● RoHS compliant
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
● ERJT06,
T08, T14 Type
1
2
3
4
5
6
7
8
9
10
11
E
R
J
T
0
6
J
1
0
0
V
Size, Power Rating
Code
Inch
Power R.
T06
0805
0.25 W
T08
1206
0.33 W
T14
1210
0.5 W
Product Code
Thick Film
Chip Resistors
Resistance Tolerance
Code
J
Packaging Methods
Code
Tolerance
±5%
Packaging
Part No.
V
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
U
Embossed Carrier Taping
ERJT14
4 mm pitch, 5,000 pcs.
ERJT06
ERJT08
Resistance Value
The first two digits are significant figures of resistance
and the third one denotes number of zeros following.
Example: 222→2.2 kΩ
● ERJT14L
Type
1
2
3
4
5
6
7
7
8
9
10
11
E
R
J
T
1
4
L
M
1
0
0
U
Product Code
Thick Film
Chip Resistors
Size, Power Rating
Code Inch Power R.
T14 1210
0.5 W
Product specifications
Resistance Tolerance
Code Specifications
L
Trimming-less
Code
K
M
Tolerance
±10 %
±20 %
Packaging Methods
Code
U
Packaging
Part No.
Embossed Carrier Taping
ERJT14L
4 mm pitch, 5,000 pcs.
Resistance Value
The first two digits are significant figures of resistance
and the third one denotes number of zeros following.
Example: 222→2.2 kΩ
✽ Please contact us for 2012 (mm) and 3216 (mm) size trimming-less types.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06 Nov. 2015
– 35 –
Anti-Pulse Thick Film Chip Resistors
Construction
Dimensions in mm (not to scale)
Protective coating
L
a
Electrode (Inner)
Alumina substrate
W
t
b
Electrode
(Between)
Dimensions (mm)
Part No.
(inch size)
ERJT06
(0805)
2.00
±0.20
W
a
±0.10
1.25
0.25
b
±0.20
±0.20
0.40
Mass (Weight)
[g/1000 pcs.]
t
0.60
±0.10
ERJT08
+0.05
+0.05
±0.20
±0.20
±0.10
0.50
0.60
3.20 –0.20 1.60 –0.15 0.40
(1206)
ERJT14
±0.20
±0.20
±0.20
±0.20
±0.10
ERJT14L 3.20
2.50
0.35
0.50
0.60
(1210)
Electrode (Outer)
Thick film
resistive element
L
4
10
16
Ratings
Part No.
(inch size)
Power Rating
at 70 °C
(W)
Limiting
Element
(1)
Voltage
(V)
Maximum
Overload
(2)
Voltage
(V)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
T.C.R.
–6
(×10 /°C)
Category
Temperature
Range
(°C)
ERJT06
(0805)
0.25
150
200
±5
1 to 1 M
(E24)
Less than 10 Ω : –100 to +600
Less than 33 Ω : ±300
More than 33 Ω : ±200
–55 to +155
ERJT08
(1206)
0.33
200
400
±5
1 to 1 M
(E24)
Less than 10 Ω : –100 to +600
More than 10 Ω : ±200
–55 to +155
ERJT14
(1210)
0.50
200
400
±5
1 to 1 M
(E24)
Less than 10 Ω : –100 to +600
More than 10 Ω : ±200
–55 to +155
ERJT14L
(1210)
0.50
200
400
±10
±20
1 to 1 M
(E12)
Less than 10 Ω : –100 to +600
More than 10 Ω : ±200
–55 to +155
(1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Values, or Limiting Element Voltage
listed above, whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 × RCWV or max. Overload Voltage listed above whichever less.
–55 °C
100
Rated Load (%)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
70 °C
80
60
40
20
0
–60 –40 –20
155 °C
0
20
40
60
80 100 120 140 160 180
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06 Nov. 2015
– 36 –
Anti-Pulse Thick Film Chip Resistors
Limiting Power Curve
●
In rush pulse Characteristic
Pulse duration : t
Pp
Limiting
Power
Test cycle : 1000 cycles
Spec
: Resistance value = within ±5%
0
Period time : 10 s
: Anti-Pulse Thick Film Chip Resistors (ERJT14L Type)
: Anti-Pulse Thick Film Chip Resistors (ERJT Type)
: Thick Film Chip Resistors (ERJ Type)
Limiting Power : Pp (W)
ERJT08 (1206 inch/3216 mm size)
100
100
10
1
1
●
10
100
Pulse duration t (msec)
1000
●
ERJT14,ERJT14L (1210 inch/3225 mm size)
1000
Limiting Power : Pp (W)
ERJT06 (0805 inch/2012 mm size)
Limiting Power : Pp (W)
●
100
10
1
1
10
100
Pulse duration t (msec)
1000
10
1
1
10
100
Pulse duration t (msec)
1000
✽ Please contact us for 2012 (mm) and 3216 (mm) size trimming-less types.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
06 Nov. 2015
– 37 –
Anti-Sulfurated Thick Film Chip Resistors
Anti-Sulfurated
Thick Film Chip Resistors
Type: ERJ S02, S03, S06, S08, S14, S12, S1D, S1T
(Au-based inner electrode type)
Type: ERJ U01, U02, U03, U06, U08, U14, U12,
U1D, U1T, U6S, U6Q
(Ag-Pd-based inner electrode type)
Features
● High
resistance to sulfurization achieved by adopting an Au-based inner electrode (ERJS type)
and Ag-Pd-based inner electrode (ERJU type)
● High reliability
Metal glaze thick film resistive element and three layers of electrodes
● Suitable for both reflow and flow soldering
● Low Resistance type…ERJU6S, U6Q : 0.1 Ω to 1.0 Ω
● Reference Standard…IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B
● AEC-Q200 qualified (Exemption ERJU01)
● RoHS compliant
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
● ERJS0,
S1, U0, U1 Type
1
2
3
4
5
6
7
8
9
10
11
12
E
R
J
S
0
6
F
1
0
0
2
V
Resistance Tolerance
Product Code
Thick Film Chip Resistors
Code Inch
Size, Power Rating
Power R. Code Inch
U01 0201
S02
U02
S03
U03
S06
U06
S08
U08
0402
0.05 W
0.1 W
0603
0.1 W
0805
0.125 W
1206
0.25 W
● ERJU6S,
S14
U14
S12
U12
S1D
U1D
S1T
U1T
Code
F
J
0
Power R.
Code
Tolerance
±1%
±5%
Jumper
C
X
1210
0.5 W
1812
0.75 W
Resistance Value
V
2010
0.75 W
2512
1W
The first two or three digits are significant figures of
resistance and the third or 4th one denotes number
of zeros following. Jumper is expressed by R00.
Three digit type (±5%), four digit type (±1%)
Example: 222→2.2 kΩ, 1002→10 kΩ
U
Packaging Methods
Packaging
Part No.
Pressed Carrier Taping
ERJU01
2 mm pitch, 15,000 pcs.
Punched Carrier Taping
2 mm pitch, 10,000 pcs. ERJS02, ERJU02
Punched Carrier Taping ERJS03, ERJU03
4 mm pitch, 5,000 pcs. ERJS06, ERJU06
ERJS08, ERJU08
Embossed Carrier Taping ERJS14, ERJU14
4 mm pitch, 5,000 pcs. ERJS12, ERJU12
ERJS1D, ERJU1D
Embossed Carrier Taping
4 mm pitch, 4,000 pcs. ERJS1T, ERJU1T
U6Q Type
1
2
3
4
5
6
7
8
9
10
11
E
R
J
U
6
S
J
R
2
0
V
Size, Power Rating
Code Inch Power R.
0.25 W
0805
U6
Product Code
Thick Film Chip Resistors
Resistance Value
Code
Res. Value
S
0.1 Ω to 0.2 Ω
Q
0.22 Ω to 1 Ω
Resistance Tolerance
Code Tolerance
±1 %
F
±2 %
G
±5 %
J
Resistance Value
Shown by 3 digits or
letters.
(Example)
R20 : 0.20 Ω=200 mΩ
1R0 : 1.00 Ω=1000 mΩ
Code
V
Packaging Methods
Part No.
Packaging
Punched Carrier Taping ERJU6S
4 mm pitch, 5,000 pcs. ERJU6Q
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
08
– 38 –
Apr. 2015
Anti-Sulfurated Thick Film Chip Resistors
Construction
Dimensions in mm (not to scale)
L
a
W
Protective coating
t
b
Electrode (Inner)
Au-based :
ERJS type
Alumina substrate
Dimensions (mm)
Part No.
(inch size)
Ag-Pd-based:
ERJU type
ERJU01 (0201)
ERJS02 (0402)
ERJU02
ERJS03 (0603)
ERJU03
ERJS06 (0805)
ERJU06
Electrode
(Between)
L
±0.03
0.60
Thick film
resistive element
Electrode (Outer)
a
±0.03
0.30
±0.05
0.50
±0.15
0.80 –0.05 0.30
1.00
1.60
±0.05
3.20
±0.20
4.50
±0.10
±0.20
0.40
0.40
±0.10
0.45
±0.20
0.45
+0.05
–0.15
1.60
±0.20
2.50
±0.20
3.20
±0.20
2.50
±0.20
3.20
5.00
6.40
0.45
0.30
1.25
±0.20
±0.15
±0.20
1.25
3.20
0.35
+0.15
±0.20
+0.05
–0.20
0.23
±0.10
0.25
0.20
±0.20
0.50
±0.20
0.50
±0.20
0.50
±0.20
0.60
±0.20
0.65
Mass (Weight)
[g/1000 pcs.]
t
±0.05
0.15
±0.10
±0.20
2.00
b
0.10
±0.05
ERJU6□ (0805) 2.00
ERJS08 (1206)
ERJU08
ERJS14 (1210)
ERJU14
ERJS12 (1812)
ERJU12
ERJS1D (2010)
ERJU1D
ERJS1T (2512)
ERJU1T
W
±0.03
0.15
±0.05
0.8
±0.10
2
±0.10
4
±0.10
6
±0.10
10
±0.10
16
±0.10
27
±0.10
27
±0.10
45
±0.20
0.60
±0.20
0.55
±0.20
0.50
±0.20
0.50
±0.20
0.50
±0.20
0.60
±0.20
0.60
0.60
0.60
0.60
±0.20
0.60
±0.20
0.60
Ratings
PowerRating
at 70 °C
(W)
Limiting
Element
Voltage(1)
(V)
Maximum
Overload
Voltage(2)
(V)
ERJU01
(0201)
0.05
25
50
ERJS02
ERJU02
(0402)
0.1
50
100
ERJS03
ERJU03
(0603)
0.1
75
150
ERJS06
ERJU06
(0805)
0.125
150
200
ERJS08
ERJU08
(1206)
0.25
200
400
0.5
200
400
0.75
200
500
0.75
200
500
1.0
200
500
Part No.
(inch size)
ERJS14
ERJU14
(1210)
ERJS12
ERJU12
(1812)
ERJS1D
ERJU1D
(2010)
ERJS1T
ERJU1T
(2512)
Resistance
Tolerance
(%)
Resistance
Range
(Ω)
±1
±5
±1
10 to 1 M (E24, E96)
1 to 1 M
(E24)
10 to 1 M (E24, E96)
±5
1 to 3.3 M (E24)
±1
10 to 1 M (E24, E96)
±5
1 to 10 M (E24)
±1
10 to 1 M (E24, E96)
±5
1 to 10 M (E24)
±1
10 to 1 M (E24, E96)
±5
1 to 10 M (E24)
±1
10 to 1 M (E24, E96)
±5
1 to 10 M (E24)
±1
10 to 1 M (E24, E96)
±5
1 to 10 M (E24)
±1
10 to 1 M (E24, E96)
±5
1 to 10 M (E24)
±1
10 to 1 M (E24, E96)
±5
1 to 10 M (E24)
T.C.R.
-6
(×10 /°C )
Category
Temperature
Range
(°C)
-55 to +125
-55 to +155
<10 Ω:
–100 to +600
-55 to +155
10 Ω to 1 MΩ:
±200(±5%)
±100(±1%)✽
✽ERJU01,
ERJS02,
ERJU02 :
±200
-55 to +155
-55 to +155
-55 to +155
-55 to +155
1 MΩ<:
–400 to +150
-55 to +155
-55 to +155
(1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Values, or Limiting Element Voltage
listed above, whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 × RCWV or max. Overload Voltage listed above whichever less.
[Low Resistance type]
Part No.
(inch size)
ERJU6S (0805)
ERJU6Q (0805)
PowerRating Resistance
at 70 °C
Tolerance
(W)
(%)
0.25
Resistance
Range
(Ω)
0.1 to 0.2 (E24)
0.22 to 1 (E24)
±1, ±2, ±5
-6
Category
Temperature
Range
(°C)
±150
-55 to +155
T.C.R.
(×10 /°C )
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
08
– 39 –
Apr. 2015
Anti-Sulfurated Thick Film Chip Resistors
[For Jumper]
Part No.
(inch size)
ERJU01
(0201)
Rated Current
(A)
Maximum Overload Current
(A)
0.5
1
1
2
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure below.
ERJS02
ERJU02
(0402)
ERJS03
ERJU03
(0603)
Rated Load (%)
(0805)
ERJS08
ERJU08
(1206)
ERJS14
ERJU14
(1210)
ERJS12
ERJU12
70 °C
–55 °C
100
ERJS06
ERJU06
2
4
80
60
40
ERJU01
20
0
–60 –40 –20
(1812)
125 °C
0
20
40
60
155 °C
80 100 120 140 160 180
Ambient Temperature (°C)
ERJS1D
ERJU1D
(2012)
ERJS1T
ERJU1T
(2512)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
08
– 40 –
Apr. 2015
Anti-Sulfurated High Power Chip Resistors / Wide Terminal Type
Anti-Sulfurated High Power Chip Resistors /
Wide Terminal Type
Type: ERJ C1
Features
● High
resistance to sulfurization achieved by adopting Anti-Sulfurated electrode structure and material
solder-joint reliability by wide terminal construction
● Excellent heat dissipation characteristics by wide terminal construction
● AEC-Q200 qualified
● RoHS compliant
● High
Recommended Applications
● Motor
control circuit of the industrial equipment
● Automotive electronic circuits including ECUs (Electrical control unit), anti-lock breaking systems and air-bag systems
● Current
sensing for power supply circuits in a variety of equipment
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
E
R
J
C
1
C
F
R
1
0
U
Product Code
Thick Film
Chip Resistors
Size, Power Rating
Code Inch Power R.
2W
C1 1020
Resistance Value Region
B 220 mΩ < R < 1 Ω
C 10 mΩ < R < 220 mΩ
Resistance Tolerance
F
±1%
J
±5%
Code
U
Packaging Methods
Packaging
Part No.
Embossed Carrier Taping
ERJC1
4 mm pitch, 5,000 pcs.
Resistance Value
Shown by 3 digits or letters. Only when it is impossible,
shown by 4 digits or letters.
(ex.) R01 : 0.01 Ω = 10 mΩ R015 : 0.015 Ω = 15 mΩ
Construction
W
a
T
L
l03
Covered Electrode :
ERJC1C type
b
Alumina substrate
Electrode (Inner)
Ag-Pd-based :
ERJC1B type
a
Protective coating
Dimensions in mm (not to scale)
b
Electrode
(Between)
Part No.
(inch size)
ERJC1B
(1020)
Thick film
resistive element
Electrode (Outer)
ERJC1C
(1020)
b
Mass
(Weight)
[g/1000 pcs.]
0.90±0.20
27
Dimensions (mm)
L
W
T
a
0.35±0.20
2.50±0.20 5.00±0.20 0.55±0.20
0.60±0.20
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Sep. 2014
– 41 –
Anti-Sulfurated High Power Chip Resistors / Wide Terminal Type
Circuit Configuration
Type ERJC1
R
R
R
Ratings
Part No.
(inch size)
Power Rating
(1)
at 70 °C
(W)
Resistance
Tolerance (%)
Resistance
Range
(Ω)
±1
ERJC1
(1020)
2
Category
Temperature
Range
(°C)
T.C.R.
-6
(×10 /°C )
10 m to 1 (E24)
±5
10 mΩ
22 mΩ
47 mΩ
100 mΩ
< R < 22 mΩ :
< R < 47 mΩ :
< R < 100 mΩ :
:
<R< 1Ω
10 mΩ
22 mΩ
< R < 22 mΩ : ±350
: ±200
< R <1 Ω
±350
±200
±150
±100
–55 to +155
(1) Use it on the condition that the case temperature is below 155 °C.
Rated Load (%)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
100
70 °C
–55 °C
80
60
40
20
155 °C
0
–60 –40 –20 0
20 40 60 80 100 120 140 160 180
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Sep. 2014
– 42 –
Chip Resistor Array
Chip Resistor Array
Type: EXB 14V, 18V, 24V, 28V,
N8V, 2HV, 34V, V4V,
38V, V8V, S8V
Features
● High
density
2 resistors in 0.8 mm × 0.6 mm size / 0302 inch size : EXB14V
4 resistors in 1.4 mm × 0.6 mm size / 0502 inch size : EXB18V
2 resistors in 1.0 mm × 1.0 mm size / 0404 inch size : EXB24V
4 resistors in 2.0 mm × 1.0 mm size / 0804 inch size : EXB28V, EXBN8V
8 resistors in 3.8 mm × 1.6 mm size / 1506 inch size : EXB2HV
2 resistors in 1.6 mm × 1.6 mm size / 0606 inch size : EXB34V, EXBV4V
4 resistors in 3.2 mm × 1.6 mm size / 1206 inch size : EXB38V, EXBV8V
4 resistors in 5.1 mm × 2.2 mm size / 2009 inch size : EXBS8V
● Improvement of placement efficiency
Placement efficiency of Chip Resistor Array is two, four or eight times of the flat type chip resistor
● Reference Standard…IEC 60115-9, JIS C 5201-9, EIAJ RC-2129
● AEC-Q200 qualified (EXB2, EXB3)
● RoHS compliant
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
Product Code
Thick Film
Chip Resistor
Networks
1
2
3
4
5
6
7
8
9
10
11
E
X
B
V
8
V
4
7
2
J
V
Size and construction
No. of Terminal
Inch
Terminal type 4 4 Terminal
Convex/
1 0201 Array Flat Terminal 8 8 Terminal
H 16 Terminal
2 0402 Array Convex
3 0603 Array Terminal
Code
N
V
S
0402 Array
Concave
0603 Array Terminal
0805 Array
Schematics
Packaging Methods
Resistance Value
Resistance
Packaging
Part No.
Isolated The first two digits are Tolerance Code
V
type
significant figures of
J ±5 %
Embossed Carrier Taping
Nil 4 mm pitch, 2,500 pcs. EXBS8V
resistance value and
0 Jumper
the third one denotes
Punched Carrier Taping EXB14V, 18V,
the number of zeros
X 2 mm pitch, 10,000 pcs.
24V, 28V, N8V
following. Jumper is
expressed by R00
Punched Carrier Taping EXB2HV, 34V,
V 4 mm pitch, 5,000 pcs.
38V, V4V, V8V
Example : 222 → 2.2 kΩ
Construction (Example : Concave Terminal)
Schematics
● Isolated
type
14V, 24V, 34V, V4V
2 resistors
18V, 28V, N8V, 38V, V8V, S8V
4 resistors
4
3
8
7
6
5
1
2
1
2
3
4
Protective coating
Alumina substrate
Thick film
resistive element
2HV
8 resistors
Electrode (Outer)
Electrode (Between)
16 15 14 13 12 11 10
9
1
8
Electrode (Inner)
2
3
4
5
6
7
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
– 43 –
Apr. 2015
Chip Resistor Array
Ratings
Item
Specifications
Resistance Range
10 Ω to 1 MΩ : E24 series
Resistance Tolerance
J : ±5 %
14V,24V,V4V,34V
Item
14V,18V
14V,24V,V4V,34V
16 terminal
25 V
S8V
100 V
14V,18V
25 V
100 V
S8V
200 V
T.C.R.
±200×10-6/°C
Category Temperature Range
–55 °C to 125 °C
Number of Resistors 18V,28V,N8V,38V,V8V,S8V 4 element
14V,N8V
0.031 W/element
18V
0.031 W/element
(0.1 W/package)
14V,18V
Jumper Array
8 element
Power Rating at 70 °C 24V,28V,V4V,34V,V8V,38V 0.063 W/element
S8V
0.1 W/element
2HV
0.063 W/element
(0.25 W/package)
50 V
Maximum Overload 2HV
(2)
Voltage
24V,28V,N8V,38V,34V,V4V,V8V
2 element
2HV
12.5 V
Limiting Element 2HV
(1)
Voltage
24V,28V,N8V,38V,34V,V4V,V8V
4 terminal
Number of Terminals 18V,28V,N8V,38V,V8V,S8V 8 terminal
2HV
Specifications
50 V
0.5 A
Rated Current 2HV,24V,28V,N8V,38V,34V,V4V,V8V
Maximum
Overload
Current
1A
S8V
2A
14V,18V
1A
2HV,24V,28V,N8V,38V,34V,V4V,V8V
2A
S8V
4A
(1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Value, or Limiting Element Voltage listed
above, whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 × RCWV or max. Overload Voltage listed above whichever less.
–55 °C
70 °C
100
Rated Load (%)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
80
60
40
20
125 °C
0
–60 –40 –20 0
20 40 60 80 100 120 140 160 180
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
– 44 –
Apr. 2015
Chip Resistor Array
Dimensions in mm (not to scale)
(1) Convex Terminal type
EXB14V, 24V, 34V
EXB28V, 38V
A2
G
P
T
P
L
G
B
B
G
W
W
G
B
A1
B
A1
T
L
EXB2HV
G
B
W
G
B
A1 A2
P
T
L
Dimensions (mm)
Part No.
(inch size)
L
EXB14V (0201×2)
EXB24V (0402×2)
0.80
W
±0.10
±0.10
1.00
±0.10
1.00
1.60
3.80
0.45
±0.10
0.35
±0.10
0.35
±0.10
0.35
±0.10
0.65
±0.15
±0.10
0.65
±0.15
0.45
1.60
3.20
0.15
±0.10
0.35
1.60
1.60
EXB38V (0603×4)
—
0.40
0.35
±0.10
±0.20
EXB34V (0603×2)
B
±0.10
±0.10
±0.20
A2
±0.10
±0.10
1.00
A1
0.35
0.35
±0.10
±0.10
2.00
EXB2HV (0402×8)
±0.10
0.60
±0.10
EXB28V (0402×4)
T
±0.15
0.50
±0.15
0.50
—
P
±0.10
(0.50)
0.15
±0.10
(0.65)
0.25
0.18
±0.10
±0.10
—
±0.10
0.5
±0.10
1.2
±0.10
2.0
±0.10
9.0
±0.20
3.5
±0.20
7.0
0.20
±0.10
(0.50)
0.25
0.30
±0.10
(0.50)
0.30
±0.20
(0.80)
0.30
±0.20
(0.80)
0.35
0.30
±0.15
0.45
0.30
Mass (Weight)
[g/1000 pcs.]
G
( ) Reference
(2) Concave Terminal type
EXBV4V
EXBN8V, V8V, S8V
A2
P
L
G
G
B
B
G
W
W
G
B
A1
B
A1
P
T
T
L
Dimensions (mm)
Part No.
(inch size)
L
EXBN8V (0402×4)
2.00
W
±0.10
±0.10
±0.10
1.00
+0.20
–0.10
1.60
±0.10
±0.10
0.60
±0.10
±0.10
0.60
±0.10
0.80
±0.15
0.60
+0.20
0.60
1.60
EXBV8V (0603×4)
3.20 –0.10
+0.20
1.60 –0.10
EXBS8V (0805×4)
+0.20
–0.10
+0.20
–0.10
±0.20
2.20
A1
0.30
0.45
+0.20
–0.10
EXBV4V (0603×2)
5.08
T
0.70
A2
±0.10
0.30
—
±0.10
0.60
±0.15
0.80
B
0.20
±0.15
P
(0.50)
±0.15
3.0
±0.15
5.0
±0.15
10
±0.15
30
0.30
±0.15
(0.80)
0.45
0.30
±0.15
(0.80)
0.45
0.50
±0.15
0.30
(1.27)
0.55
( ) Reference
(3) Flat Terminal type
G
EXB18V
A2
B
G
W
B
A1
Mass (Weight)
[g/1000 pcs.]
G
P
T
L
Dimensions (mm)
Part No.
(inch size)
L
W
T
A1
A2
B
P
G
Mass (Weight)
[g/1000 pcs.]
EXB18V (0201×4)
1.40±0.10
0.60±0.10
0.35±0.10
0.20±0.10
0.20±0.10
0.10±0.10
(0.40)
0.20±0.10
1.0
( ) Reference
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
– 45 –
Apr. 2015
Anti-Sulfurated Chip Resistor Array
Anti-Sulfurated
Chip Resistor Array
Type: EXB U24, U28, U2H,
U34, U38
Features
● High
resistance to sulfurization achieved by adopting an Ag-Pd-based inner electrode
density
2 resistors in 1.0 mm × 1.0 mm size / 0404 inch size : EXBU24
4 resistors in 2.0 mm × 1.0 mm size / 0804 inch size : EXBU28
8 resistors in 3.8 mm × 1.6 mm size / 1506 inch size : EXBU2H
2 resistors in 1.6 mm × 1.6 mm size / 0606 inch size : EXBU34
4 resistors in 3.2 mm × 1.6 mm size / 1206 inch size : EXBU38
● Improvement of placement efficiency
Placement efficiency of Chip Resistor Array is two, four or eight times of the flat type chip resistor
● Reference Standard…IEC 60115-9, JIS C 5201-9, EIAJ RC-2129
● AEC-Q200 qualified
● RoHS compliant
● High
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
Product Code
Thick Film
Chip Resistor
Networks
1
2
3
4
5
6
7
8
9
10
11
E
X
B
U
2
8
4
7
2
J
X
Size, Construction No. of Terminal
Code
Inch
4 4 Terminal
U2 0402 Array 8 8 Terminal
U3 0603 Array H 16 Terminal
Anti-Sulfuarted
Convex Terminal
Packaging Methods
Resistance
Tolerance Code
Packaging
Part No.
J ±5 %
Punched Carrier Taping EXBU24,
X 2 mm pitch, 10,000 pcs. U28
0 Jumper
Resistance Value
The first two digits are significant figures
of resistance value and the third one
denotes the number of zeros following.
Jumper is expressed by R00
Example : 222 → 2.2 kΩ
Construction
V
Punched Carrier Taping EXBU2H,
4 mm pitch, 5,000 pcs. U34, U38
Schematics
● Isolated
type
EXBU24, U34
EXBU28, U38
2 resistors
4 resistors
4
3
8
7
6
5
1
2
1
2
3
4
Protective coating
Alumina substrate
EXBU2H
8 resistors
Thick film
Electrode
resistive element (Inner)
Electrode
(Between)
Electrode
(Outer)
16 15 14 13 12 11 10
9
1
8
2
3
4
5
6
7
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
– 46 –
Apr. 2015
Anti-Sulfurated Chip Resistor Array
Dimensions in mm (not to scale)
EXBU24, U34
EXBU28, U38
A2
P
T
P
L
G
G
B
B
G
W
W
G
B
A1
B
A1
T
L
EXBU2H
G
B
W
G
B
A1 A2
P
T
L
Dimensions (mm)
Part No.
(inch size)
L
EXBU24 (0402×2)
EXBU28 (0402×4)
1.00
±0.10
±0.10
2.00
±0.10
±0.10
1.00
1.60
±0.20
1.60
3.80
EXBU34 (0603×2)
1.60
±0.20
3.20
T
1.00
±0.10
EXBU2H (0402×8)
EXBU38 (0603×4)
W
±0.10
0.40
±0.10
0.45
±0.10
±0.10
0.35
±0.10
±0.10
0.65
±0.15
0.65
±0.15
0.35
±0.10
0.35
±0.10
0.45
±0.15
0.50
±0.15
1.60
A1
±0.10
0.50
A2
B
—
0.18
±0.10
0.35
±0.10
0.35
—
P
±0.10
(0.65)
0.25
0.20
±0.10
(0.50)
0.25
0.30
±0.10
(0.50)
0.30
±0.20
(0.80)
0.30
0.30
±0.15
0.45
0.30
±0.20
Mass (Weight)
[g/1000 pcs.]
G
(0.80)
±0.10
1.2
±0.10
2.0
±0.10
9.0
±0.20
3.5
±0.20
0.35
(
7.0
) Reference
Ratings
Specifications
Resistance Range
10 Ω to 1 MΩ
E24 series
Resistance Tolerance
J: ±5 %
Number of
Terminals
Number of
Resistors
U24, U34
4 terminal
U28, U38
8 terminal
U2H
16 element
U24, U34
2 element
U28, U38
4 element
U2H
8 element
Item
Specifications
Limiting Element U2H
(1)
Voltage
U24, U28, U34, U38
Max. Overload
(2)
Voltage
Power Rating U24, U28, U34, U38 0.063 W/element
0.063 W/element
at 70 °C
U2H
(0.25 W/package)
25 V
50 V
U2H
50 V
U24, U28, U34, U38
100 V
-6
T.C.R.
±200×10 /°C
Category Temperature Range
–55 °C to 125 °C
Jumper
Array
Item
Rated
U24, U28, U2H, U34, U38 1 A
Current
Max. Overload
U24, U28, U2H, U34, U38 2 A
Current
(1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Value, or Limiting Element Voltage listed
above, whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5 × RCWV or max. Overload Voltage listed above whichever less.
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
–55 °C
70 °C
Rated Load (%)
100
80
60
40
20
125 °C
0
–60 –40 –20 0
20 40 60 80 100 120 140 160 180
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04
– 47 –
Apr. 2015
Chip Resistor Networks
Chip Resistor Networks
Type: EXBD
EXBE
EXBA
EXBQ
Features
●
●
●
●
High density placing for digital signal circuits
· Bussed 8 or 15 resistors for pull up/down circuits
EXBD: 3.2 mm × 1.6 mm × 0.55 mm, 0.635 mm pitch
EXBE: 4.0 mm × 2.1 mm × 0.55 mm, 0.8 mm pitch
EXBA: 6.4 mm × 3.1 mm × 0.55 mm, 1.27 mm pitch
EXBQ: 3.8 mm × 1.6 mm × 0.45 mm, 0.5 mm pitch
· Available direct placing on the bus line by means of half pitch spacing without through-holes on PWB
(“High density placing” is shown below)
High speed mounting using conventional placing machine
Reference Standard…IEC 60115-9, JIS C 5201-9, EIAJ RC-2130
RoHS compliant
[High density placing]
Pull up resistors
Direct placement on the bus line
VCC
EXBE10C
EXBA10P
VCC
VCC
IC
IC
IC
IC
IC
IC
No through hole
Through holes
0.4 mm pitch
0.635 mm pitch
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
Product Code
Thick Film
Resistor
Network
1
2
3
4
5
6
7
8
9
10
11
E
X
B
E
1
0
C
1
0
3
J
Dimension Code of
Chip Resistor Network
Code
D
E
A
Q
Inch
1206
1608
2512
1506
Dimensions
3.2 mm×1.6 mm
4.0 mm×2.1 mm
6.4 mm×3.1 mm
3.8 mm×1.6 mm
Number of
Terminals
10(EXBD,E,A)
16(EXBQ)
Circuit Configuration
Code
C
P
P
E
Common Terminal Position
Center common circuit
(EXBD, EXBE)
Diagonal common circuit
(Terminal 5 and Terminal 10)
(EXBA)
One side common circuit
(Terminal 16)
(EXBQ)
Diagonal common circuit
(Terminal 1 and Terminal 6)
(EXBA)
Resistance Value
The first two digits are
significant figures of
resistance value and
the third one denotes
the number of zeros
following.
Resistance
Tolerance
±5 %
J
12
Suffix for Special
Requirements
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 48 –
Chip Resistor Networks
Construction (Example : EXBD)
Protective coating
Protective coating
Electrode
(Inner)
Alumina substrate
Electrode (Outer)
Thick film
resistive element
Electrode (Between)
Electrode (Inner)
Alumina substrate
Thick film
resistive element
Dimensions in mm (not to scale)
0.35±0.15
0.35±0.15
0.55±0.10
1.27±0.10
6.4±0.2
472
1.6±0.2
3.1±0.2
I03
0.5±0.1
0.55±0.10
0.5±0.2
0.35±0.20
EXBA10P
0.45±0.10
3.8±0.2
EXBA10E
0.30±0.15
0.4±0.2
I03
0.15 +0.15
–0.05
0.3±0.1
0.15 +0.15
–0.05
0.8±0.1
4.0±0.2
0.3±0.2 0.3±0.2
0.25±0.20
0.25±0.20
0.5±0.2
0.35±0.20
I03
f0.3 +0.1
–0.2
0.5±0.2 0.5±0.2
0.25±0.10
0.40±0.15
0.3±0.1
0.25±0.10
0.55±0.10
0.3±0.2
0.5±0.2
0.635±0.10
3.20±0.15
0.2±0.1
0.40±0.15
0.2±0.1
1.60±0.15
0.3±0.2
EXBQ
0.2±0.1
0.4±0.2
0.4±0.2
0.2±0.1
EXBA
0.7±0.2
0.25±0.15
EXBE
0.5±0.2
f0.3 +0.1
–0.2
2.1±0.2
EXBD
0.33±0.15
f0.2±0.1
0.2±0.1
0.15 +0.20
–0.05
I03
Mass (Weight)[1000 pcs.] : 10 g Mass (Weight)[1000 pcs.] : 16 g Mass (Weight)[1000 pcs.] : 40 g Mass (Weight)[1000 pcs.] : 9 g
Circuit Configuration
EXBD, EXBE
EXBA
10
9
8
7
1
EXBQ
EXBA10E
EXBA10P
10
9
8
7
6
10
9
8
7
6
16 15 14 13 12 11 10 9
1
2
3
4
5
1
2
3
4
5
1
6
2
3
4
5
2
3 4
5
6
7
8
Ratings
Item
Series
Resistance Range
Resistance Tolerance
Number of Terminals
Number of Resistors
Power Rating at 70 °C
(1)
Limiting Element Voltage
(2)
Maximum Overload Voltage
T. C. R.
Category Temperature Range
Specifications
EXBE
EXBA
47 Ω to 1 MΩ (E12)
±5%
10 terminals
8 element
0.05 W/element
0.063 W/element
25V
50 V
50 V
100 V
–6
±200 × 10 / °C
–55 °C to +125 °C
EXBD
EXBQ
100 Ω to 470 kΩ (E6 series)
16 terminals
15 element
0.025 W/element
25V
50 V
(1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Value, or Limiting Element Voltage
listed above, whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determinedfrom SOTV=2.5 × RCWV✽ or Maximum Overload Voltage listed above
whichever less.
Rated Load (%)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
100
–55 °C
70 °C
80
60
40
20
125 °C
0
–60 –40 –20 0 20 40 60 80 100120140160180
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 49 –
Chip Attenuator
Chip Attenuator
Type: EXB 14AT
EXB 24AT
Features
● Unbalanced
π type attenuator circuit in one chip
EXB14AT (0.8 mm × 0.6 mm), EXB24AT (1.0 mm × 1.0 mm)
● Reduced mounting area :
EXB14AT : About 60 % smaller than the area of an attenuator circuit consisting of three 0603 chip resistors,
almost equal to the area of three 0402 chip resistors
EXB24AT : About 50 % smaller than the area of an attenuator circuit consisting of
three 1005 chip resistors, almost equal to the area of three 0603 chip resistors
● Mounting cost reduction : (Only 1 chip placed as compared to 3)
● Attenuation : 1 dB to 10 dB
● RoHS compliant
Recommended Applications
● Attenuation
/ level control / impedance matching of high frequency
(communication signalling equipment cellular phones(GSM, CDMA, PDC, etc.), PHS, PDAs)
■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions,
Please see Data Files
Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
12
E
X
B
1
4
A
T
3
A
R
3
X
Product Code
Code
Thick Film Resistor
Network
Attenuation Value
Dimensions and
Circuit Configuration
14AT
0.8 mm × 0.6 mm
(inch size : 0302)
π type attenuator
24AT
1.0 mm × 1.0 mm
(inch size : 0404)
π type attenuator
Tolerance
One-digit number /one letter
shows attenuation value
(ex.) 1→1 dB, A→10 dB
R3
±0.3 dB
R5
±0.5 dB
Packaging
X
Punched Carrier Taping
2 mm pitch, 10,000 pcs.
Characteristics
Impedance
A
Attenuation-Frequency Characteristics
50 Ω
Circuit Configuration
(EXB14AT, EXB24AT)
0
2dB
2
4
3
R1
3dB
3
Attenuation (dB)
Unbalanced π type
1dB
1
4dB
4
5dB
5
6dB
6
7
R2
R2
8
9
10dB
10
11
30 k 100 k
1
1M
10 M
Frequency (Hz)
100 M
1G
2
3G
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 50 –
Chip Attenuator
Construction
EXB14AT
EXB24AT
Protective coating
Protective
coating
Alumina substrate
Alumina
substrate
Thick film
resistive element
Electrode (Outer)
Electrode (Inner)
Thick film
resistive element
Electrode (Between)
Electrode (Outer)
Electrode (Inner)
Electrode (Between)
Dimensions in mm (not to scale)
EXB14AT
EXB24AT
A
A
4
3
W
W
B
B
3
4
P
L
1
T
P
L
2
Dimensions
(mm)
L
±0.10
0.80
W
±0.10
0.60
T
±0.10
0.35
T
C
2
C
1
A
±0.10
0.35
B
±0.10
0.15
C
±0.10
0.15
P
(typical value)
0.50
P
L
W
T
A
B
C
Dimensions
(typical value)
(mm) 1.00±0.10 1.00±0.10 0.35±0.10 0.40±0.10 0.15±0.10 0.25±0.10 0.65
<Marking Configuration>
The bar marking for recognizing terminal direction
is located on the side of terminal 4.
Mass (Weight) [1000 pcs.] : 1.1 g
<Marking Configuration>
The bar marking for recognizing terminal direction
is located on the side of terminal 3, 4.
Mass (Weight) [1000 pcs.] : 0.7 g
Ratings
Part No.
Attenuation Value
Attenuation Value Tolerance
Characteristic Impedance
Power Rating
Frequency Range at 70 °C
VSWR (Voltage Standing Wave Ratio)
Number of Resistors
Number of Terminals
Category Temperature Range
EXB14AT, EXB24AT
✽
1 dB, 2 dB, 3 dB, 4 dB, 5 dB, 6 dB, 10 dB
1 dB, 2 dB, 3 dB, 4 dB, 5 dB : ±0.3 dB
6 dB, 10 dB
: ±0.5 dB
50 Ω
0.04 W /package
DC to 3.0 GHz
1.3 max.
3 resistors
4 terminals
–55 °C to +125 °C
✽ Please inquire about the other Attenuator value
120
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
Rated Power (%)
100
–55 °C
70 °C
80
60
40
20
0
–60 –40 –20
125 °C
0
20
40
60
80 100 120 140 160
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 51 –
Surface Mount Resistors Packaging Method (Taping)
Surface Mount Resistors Series
Products
Thick Film
Chip Resistors
Precision
Thick Film
Chip Resistors
Part No.
Current Sensing
Resistors,
Metal Plate Type
Size mm
(inch)
20,000
✽
Punched
Carrier Taping
(2 mm pitch)
Punched
Carrier Taping
(4 mm pitch)
—
—
Embossed
Carrier Taping
(4 mm pitch)
ERJXGN
0402(01005)
ERJ1GN
0603(0201)
15,000
—
—
—
ERJ2GE
1005(0402)
—
10,000, 20,000
—
—
ERJ3GE
1608(0603)
—
—
5,000
—
ERJ6GE
2012(0805)
—
—
5,000
—
ERJ8GE
3216(1206)
—
—
5,000
—
ERJ14
3225(1210)
—
—
—
5,000
ERJ12
4532(1812)
—
—
—
5,000
ERJ12Z
5025(2010)
—
—
—
5,000
ERJ1T
6432(2512)
—
—
—
4,000
ERJXGN
0402(01005)
20,000
—
—
—
ERJ1GN/1RH
0603(0201)
15,000
—
—
—
ERJ2RH/2RK
1005(0402)
—
10,000
—
—
ERJ3RB/3RE/3EK 1608(0603)
—
—
5,000
—
ERJ6RB/6RE/6EN 2012(0805)
—
—
5,000
—
ERJ8EN
3216(1206)
—
—
5,000
—
ERJ14N
3225(1210)
—
—
—
5,000
ERJ12N
4532(1812)
—
—
—
5,000
ERJ12S
5025(2010)
—
—
—
5,000
4,0000
ERJ1TN
6432(2512)
—
—
—
4,000
ERA1A
0603(0201)
15,000
—
—
—
1005(0402)
—
10,000
—
—
1608(0603)
—
—
5,000
—
2012(0805)
—
—
5,000
—
Metal Film (Thin Film)
ERA2A/2H
Chip Resistors,
High Reliability Type ERA3A
/High Sound
ERA6A
Quality Type
ERA8A
Thick Film
Chip Resistors/
Low Resistance
Type
Packaging (Standard Quantity : pcs./reel)
Pressed
Carrier Taping
(2 mm pitch)
3216(1206)
—
—
5,000
—
ERJ2LW/2BW
1005(0402)
10,000
—
—
—
ERJ2BS/2BQ
1005(0402)
—
10,000
—
—
ERJ3L/3B/3R/L03 1608(0603)
ERJ6L/6B/6C
2012(0805)
ERJ6D/6R/L06
—
—
5,000
—
—
—
5,000
—
ERJ8B/8C/8R/L08 3216(1206)
—
—
5,000
—
ERJ14B/14R/L14
3225(1210)
—
—
—
5,000
ERJ12R/L12
4532(1812)
—
—
—
5,000
ERJ12Z/L1D
5025(2010)
—
—
—
5,000
ERJ1TR
6432(2512)
—
—
—
4,000
ERJL1W
6432(2512)
—
—
—
3,000
ERJMP2
3216(1206)
—
—
—
3,000
ERJMP3
5025(2010)
—
—
—
3,000
✽✽
ERJMP4
6432(2512)
—
—
—
2,000
ERJMS4
6432(2512)
—
—
—
2,000
ERJMS6
6468(2526)
—
—
—
1,000 (8 mm Pitch)
ERJMB1
2550(1020)
—
—
—
2,000
ERJM1W
6432(2512)
—
—
—
3,000
✽ W8P2 : Width 8 mm, Pitch 2 mm, ✽✽ W4P1 : Width 4 mm, Pitch 1 mm
(1) Anti-Sulfurated High Power Chip Resistors / Wide Terminal Type
10
– 52 –
Mar. 2016
Surface Mount Resistors Packaging Method (Taping)
Surface Mount Resistors Series
Products
Part No.
ERJA1
(1)
High Power
ERJB1/ERJC1
Chip Resistors/
Wide Terminal Type ERJB2
ERJB3
High Precision/
Anti-Surge
Thick Film
Chip Resistors
Anti-Pulse
Thick Film
Chip Resistors
Anti-Sulfurated
Thick Film
Chip Resistors
Chip Resistor
Array
Anti-Sulfurated
Chip Resistor
Array
Chip Resistor
Networks
Chip Attenuator
Packaging (Standard Quantity : pcs./reel)
Pressed
Size mm
Carrier Taping
(inch)
(2 mm pitch)
3264(1225)
—
Punched
Carrier Taping
(2 mm pitch)
—
Punched
Carrier Taping
(4 mm pitch)
—
Embossed
Carrier Taping
(4 mm pitch)
4,000
2550(1020)
—
—
—
5,000
1632(0612)
—
—
5,000
—
1220(0508)
—
—
5,000
—
ERJPA2
1005(0402)
—
10,000
—
—
ERJPB3/P03/PA3
1608(0603)
—
—
5,000
—
ERJPB6/P06
2012(0805)
—
—
5,000
—
ERJP08
3216(1206)
—
—
5,000
—
ERJP14
3225(1210)
—
—
—
5,000
ERJT06
2012(0805)
—
—
5,000
—
ERJT08
3216(1206)
—
—
5,000
—
ERJT14
3225(1210)
—
—
—
5,000
ERJU01
0603(0201)
15,000
—
—
—
ERJS02/U02
1005(0402)
—
10,000
—
—
ERJS03/U03
ERJS06/U06
ERJU6S/U6Q
ERJS08/U08
1608(0603)
—
—
5,000
—
2012(0805)
—
—
5,000
—
3216(1206)
—
—
5,000
—
ERJS14/U14
3225(1210)
—
—
—
5,000
ERJS12/U12
4532(1812)
—
—
—
5,000
ERJS1D/U1D
5025(2010)
—
—
—
5,000
ERJS1T/U1T
6432(2512)
—
—
—
4,000
EXB14V
0806(0302)
—
10,000
—
—
EXB24V
1010(0404)
—
10,000
—
—
EXB34V
1616(0606)
—
—
5,000
—
EXBV4V
1616(0606)
—
—
5,000
—
EXB18V
1406(0502)
—
10,000
—
—
EXB28V
2010(0804)
—
10,000
—
—
EXBN8V
2010(0804)
—
10,000
—
—
EXB38V
3216(1206)
—
—
5,000
—
EXBV8V
3216(1206)
—
—
5,000
—
EXBS8V
5022(2009)
—
—
—
2,500
EXB2HV
3816(1506)
—
—
5,000
—
EXBU24
1010(0404)
—
10,000
—
—
EXBU34
1616(0606)
—
—
5,000
—
EXBU28
2010(0804)
—
10,000
—
—
EXBU38
3216(1206)
—
—
5,000
—
EXBU2H
3816(1506)
—
—
5,000
—
EXBD
3216(1206)
—
—
5,000
—
EXBE
4021(1608)
—
—
—
4,000
EXBA
6431(2512)
—
—
—
4,000
EXBQ
3816(1506)
—
—
5,000
—
EXB14AT
0806(0302)
—
10,000
—
—
EXB24AT
1010(0404)
—
10,000
—
—
(1) Anti-Sulfurated High Power Chip Resistors / Wide Terminal Type
10
– 53 –
Mar. 2016
Surface Mount Resistors Packaging Method (Taping)
Carrier Tape
Punched Carrier
P1
fD0
Embossed Carrier
P2
P0
B
W
F
E
Pressed Carrier
T
P1 (2 mm Pitch)
A
T
T
fD1 (Only Emboss)
Pressed Carrier Taping (2 mm Pitch)
● Chip Resistors / Precision Chip / Metal Film(Thin Film)Chip
Part No.
ERJXGN
ERJ1GN
ERJ1R□
ERJU01
ERA1A
ERJ2LW
ERJ2BW
Size mm
A
B
(inch)
±0.03
0402(01005) 0.24
0.45±0.03
0603
(0201)
0.38±0.05 0.68±0.05
W
/ Low Resistance / Anti-Surge / Anti-Sulfur
F
E
P1
P2
(Unit : mm)
0D0
P0
T
0.31±0.05
8.00±0.20 3.50±0.05 1.75±0.10 2.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10
0
1005(0402) 0.68±0.10 1.20±0.10
1005(0402) 0.67±0.10 1.17±0.10
0.42±0.05
0.60±0.05
0.61±0.05
Punched Carrier Taping (2 mm Pitch)
● Chip
Resistors / Precision Chip / Metal Film(Thin Film)Chip / Low Resistance / Anti-Surge / Anti-Sulfur
Part No.
Size mm
(inch)
ERJ2□
ERJPA2
ERJ□□2
ERA2□
1005
(0402)
● Chip
A
B
W
F
E
P1
P2
(Unit : mm)
0D0
P0
T
0.52±0.05
0.67±0.05 1.17±0.05 8.00±0.20 3.50±0.05 1.75±0.10 2.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10
0
Resistor Array / Anti-Sulfurated Chip Resistor Array / Chip Attenuator
mm
Part No. Size
A
(inch)
EXB14V
0806
+0.10
EXB14AT
(0302)
0.70−0.05
EXB18V 1406(0502)
EXB24V
1010
EXBU24
(0404)
EXB24AT
1.20±0.10
EXB28V
2010
EXBU28
(0804)
EXBN8V
B
W
F
E
P1
(Unit : mm)
P2
0D0
P0
T
0.95+0.05
−0.10
1.60±0.10
±0.20
3.50±0.05 1.75±0.10 2.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10
0.52±0.05
0
1.20±0.10 8.00
2.20±0.10
Punched Carrier Taping (4 mm Pitch)
● Chip Resistors / Precision Chip / Metal Film(Thin Film)Chip
Part No.
Size mm
(inch)
A
ERJ3□
ERJ3LW(10 mΩ)
ERJ3BW
1608
1.10±0.10
ERJ□□3
(0603)
ERA3A
ERJ3LW(5 mΩ)
ERJ6□
ERJ□□6
2012
ERJU6S, U6Q
(0805)
1.65±0.15
ERA6A
ERJB3
1220(0508)
ERJ6BW
2012
1.55±0.15
ERJ6LW
(0805)
ERJ6CW
ERJ8□
ERJ8□W
3216
ERJ□□8
(1206)
2.00±0.15
ERA8A
ERJB2
1632(0612)
/ Low Resistance / High Power / High Precision / Anti-Surge / Anti-Pulse / Anti-Sulfur
B
W
F
E
P1
P2
P0
(Unit : mm)
0D0
T
0.70±0.05
1.90±0.10
2.50±0.20
0.84±0.05
±0.20
8.00
±0.05
3.50
2.30±0.20
1.75
±0.10
4.00
±0.10
2.00
±0.05
±0.10
4.00
+0.10
0
1.50
0.94±0.05
3.60±0.20
0.84±0.05
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
11 May. 2016
– 54 –
Surface Mount Resistors Packaging Method (Taping)
● Chip Resistor Array / Anti-Sulfurated Chip Resistor Array / Chip Resistor
Part No.
EXB34V
EXBU34
EXB38V
EXBU38
EXB2HV
EXBU2H
EXBV4V
Size mm (inch)
A
B
W
1616(0606)
1.95±0.20
EXBV8V
3216(1206)
3.60±0.20
EXBD
3216(1206) 2.00±0.20 3.60±0.20
F
E
Networks
P1
(Unit : mm)
P2
P0
0D0
T
±0.20
1616(0606)
1.95
3.60±0.20
3216(1206)
0.70±0.05
±0.15
3816(1506)
1.95
4.10±0.15
±0.20
EXBQ
3816(1506) 1.90
8.00±0.20 3.50±0.05 1.75±0.10 4.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10
0
0.84±0.05
0.84±0.10
±0.20
0.64±0.05
4.10
Embossed Carrier Taping (1 mm Pitch)
● Chip
Resistors
Part No.
(Unit : mm)
Size mm (inch)
A
B
±0.05
ERJXGN 0402(01005) 0.25
W
±0.05
0.45
F
±0.20
E
±0.05
4.00
1.80
P1
±0.10
0.90
P2
±0.10
1.00
P0
±0.10
1.00
±0.10
2.00
0D0
±0.10
0.80
Embossed Carrier Taping (4 mm Pitch)
● Chip Resistors / Precision Chip /
Part No. Size mm (inch)
3225
ERJ14□
ERJ□14
(1210)
4532
ERJ12□
ERJ□12
(1812)
ERJ12Z
5025
ERJ12S
ERJ□1D (2010)
2550
ERJB1
ERJC1
(1020)
ERJ1T□
6432
ERJ□1T
(2512)
ERJL1W
● Current
● Chip
Low Resistance / High Power / Anti-Surge / Anti-Pulse / Anti-Sulfur Pulse / Anti-Sulfur
A
±0.20
2.80
B
±0.20
3.50
EXBA
8.00
±0.30
F
E
P1
P2
P0
0D0
T
Size mm (inch)
0D1
1.00+0.10
0
±0.05
3.50
3.50±0.20 4.80±0.20
1.00±0.10
±0.20
2.80
±0.20
5.30
1.75±0.10 4.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10
0
12.00±0.30 5.50±0.20
1.5 min.
3.60±0.20 6.90±0.20
1.60±0.10
A
B
1.10±0.20
W
(Unit : mm)
F
E
P1
P2
P0
0D0
T
0D1
3216(1206)
1.55
±0.20
−
3216(1206) 1.90±0.20 3.50±0.20 8.00±0.30 3.50±0.10
1.40±0.20
−
3216(1206)
1.10±0.20
−
5025(2010)
1.55±0.20
−
±0.20
5.40±0.20 12.00±0.30 5.50±0.10 1.75±0.10 4.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10
0
5025(2010) 2.90
1.15±0.20
−
2550(1020)
±0.20
−
±0.20
1.5 min.
1.55
6432(2512)
1.60
6432(2512) 3.50±0.20 6.90±0.20 12.00±0.30 5.50±0.10
1.20±0.20
6432(2512)
6432(2512)
1.60
1.5 min.
1.80±0.20 1.5 min.
Resistor Array / Chip Resistor Networks
W
(Unit : mm)
F
E
P1
P2
P0
0D0
4021(1608) 2.50±0.20 4.40±0.20 12.00±0.30 5.50±0.20 1.75±0.10 4.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10
0
6431(2512) 3.50
−
±0.20
Part No. Size mm (inch)
A
B
EXBS8V 5022(2029) 2.80±0.20 5.70±0.20
EXBE
W
Sensing Resistors, Metal Plate Type
Part No.
ERJMP2
(1m Ω)
ERJMP2
(2m Ω)
ERJMP2
(3 to 50m Ω)
ERJMP3
(1 to 2m Ω)
ERJMP3
(3 to 50m Ω)
ERJMB1
ERJMP4
(1 to 2m Ω)
ERJMP4
(3 to 50m Ω)
ERJMS4
ERJM1W
0.5 max.
(Unit : mm)
3264(1225) 3.50±0.20 6.80±0.20
ERJA1
T
±0.20
±0.20
6.80
T
1.6 max.
1.10±0.20
0D1
1.5 min.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
11 May. 2016
– 55 –
Surface Mount Resistors Packaging Method (Taping)
Embossed Carrier Taping (8 mm Pitch)
● Current
Sensing Resistors, Metal Plate Type
Part No. Size mm (inch)
A
B
W
(Unit : mm)
F
E
P1
P2
P0
0D0
0D1
T
ERJMS6 6468(2526) 6.90±0.20 7.50±0.20 12.00±0.30 5.50±0.05 1.75±0.10 8.00±0.10 2.00±0.05 4.00±0.10 1.50+0.10
2.45±0.20 1.5 min.
0
Taping Reel
(Unit : mm)
fC
fN
Tape Width
0A
(W)
4mm Width 180.0±3.0
8mm Width
W1
fA
12mm Width
W2
0
180.0 –1.5
0N
60.0+1.0
0
24mm Width 380.0±2.0 80.0±1.0
0C
13.0±0.2
W1
W2
4.5±0.5
7.0±0.5
9.0+1.0
0
11.4±1.0
+1.0
0
15.4±1.0
25.4±1.0
29.4±1.0
13.0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
11 May. 2016
– 56 –
Surface Mount Resistors Land Pattern
Recommended Land Pattern
● An
example of a land pattern for the Rectangular Type is shown below.
Chip Resistor
Dimensions (mm)
a
b
c
0402/01005
0.15 to 0.20
0.5 to 0.7
0.20 to 0.25
0603/0201
0.3 to 0.4
0.8 to 0.9
0.25 to 0.35
1005/0402
0.5 to 0.6
1.4 to 1.6
0.4 to 0.6
1608/0603
0.7 to 0.9
2.0 to 2.2
0.8 to 1.0
2012/0805
1.0 to 1.4
3.2 to 3.8
0.9 to 1.4
3216/1206
2.0 to 2.4
4.4 to 5.0
1.2 to 1.8
3225/1210
2.0 to 2.4
4.4 to 5.0
1.8 to 2.8
High power (double-sided resistive elements structure) type
4532/1812
3.3 to 3.7
5.7 to 6.5
2.3 to 3.5
Dimensions (mm)
a
b
c
0.52
1.4 to 1.6 0.4 to 0.6
5025/2010
3.6 to 4.0
6.2 to 7.0
1.8 to 2.8
5.0 to 5.4
7.6 to 8.6
2.3 to 3.5
3.6 to 4.0
7.6 to 8.6
2.3 to 3.5
c
Size
mm/inch
a
b
Part No.
Size
mm/inch
ERJ2LW/2BW 1005/0402
6432/2512
✽
6432/2512
ERJ3LW/3BW 1608/0603 0.5 to 0.8 2.5 to 2.7 0.9 to 1.1
ERJ6LW
ERJ6BW
ERJ6CW
(10 to 13 mΩ)
ERJ6CW
(15 to 30 mΩ)
ERJ8BW
ERJ8CW
(10 to 16 mΩ)
ERJ8CW
(18 to 50 mΩ)
● An
✽ ERJL1W
2012/0805 0.6 to 0.8 3.2 to 3.8 1.1 to 1.4
2012/0805
0.9
3.2 to 3.8 1.1 to 1.4
2012/0805 0.7 to 0.9 3.2 to 3.8 1.1 to 1.4
2012/0805 0.9 to 1.1 3.2 to 3.8 1.1 to 1.4
3216/1206
1.2
4.4 to 5.0 1.3 to 1.8
3216/1206 2.0 to 2.6 4.4 to 5.0 1.2 to 1.8
example of a land pattern for High Power Chip Resistors / Wide Terminal Type is shown below.
a
b
c
b
Part No.
Dimensions (mm)
a
b
c
ERJA1
ERJB1
(1)
ERJC1
ERJB2
6.4
1.70
0.60
5.0
1.30
0.75
3.2
0.95
0.70
ERJB3
2.0
0.80
0.60
(1) Anti-Sulfurated High Power Chip Resistors /
Wide Terminal Type
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
08
– 57 –
Mar. 2016
Surface Mount Resistors Land Pattern
● An example of a land pattern for Chip Resistor Array,
Anti-Sulfurated Chip Resistor Array and Chip Attenuator is shown below.
Conductor
a
d
f
a
Solder resist
b
b
P
Dimensions (mm)
Part No.
EXB14V
EXB14A
EXB24V
EXBU24
EXB24A
f
Dimensions (mm)
Part No.
a
b
c
d
0.30
0.30
0.30
0.80 to 0.90
EXB18V
0.20 to 0.30 0.15 to 0.20 0.15 to 0.20 0.80 to 0.90
0.40
0.80
1.4 to 1.5
EXBV4V,V8V 0.7 to 0.9 0.4 to 0.45 0.4 to 0.45 2 to 2.4
EXB34V,38V
0.7 to 0.9 0.4 to 0.5 0.4 to 0.5 2.2 to 2.6
EXBU34,U38
EXBS8V
1 to 1.2 0.5 to 0.75 0.5 to 0.75 3.2 to 3.8
0.5
0.35 to 0.40
0.30
f
a
b
d c d c d
a
b
EXB28V
0.40
0.525
EXBU28
EXBN8V 0.45 to 0.50 0.35 to 0.38
a
b
c
d
Part No.
f
0.25
0.25
1.40
0.25
0.25
1.40 to 2.00
b
c
f
P
0.80
1.27
a
b
Dimensions (mm)
Part No.
EXB2HV
EXBU2H
d c d c d c d c d c d c d
b
Dimensions (mm)
a
b
c
d
f
1.00
0.425
0.25
0.25
2.00
example of a land pattern for Chip Resistor Networks is shown below.
EXBE
Pitch 0.635 mm
Through-hole less 0.2
EXBA10P
1.27
0.635
EXBA10E
0.2 1.27
0.635
1.27
0.1 to 0.15
EXBD
0.2 to 0.3
Pitch 0.5 mm
2.0 to 2.6
0.9 to 1.1
0.9 to 1.1
0.3 to 0.4
For
popular
pattern
EXBQ
2.0 to 2.6
0.635
Pitch 0.635 mm
0.8 0.4 0.35 to 0.4
3.3
5.2
0.4 to 0.5
1.27
0.4 to 0.5
Pitch 0.4 mm
Through-hole less
2.2
4.4
2.2
4.4
For high
density
✽
pattern
3.3 to 3.4
5.0 to 5.4
0.4 to 0.6
0.5
1.27
1.4 to 1.5
For
popular
pattern
0.35 to 0.4
0.8
0.4 to 0.5
2.1 to 2.5
Pitch 0.8 mm
4.3 to 4.7
Pitch 1.27 mm
3.1 to 3.5
EXBA
1.4
3.4
● An
c
c
2.6 to 2.8
3.6 to 4.2
0.20 to 0.25
0.50
✽ When designing high density land patterns, examine the reliability of isolation among the lines and adopt the chip resistor networks.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
08
– 58 –
Mar. 2016
Surface Mount Resistors Recommended Soldering Conditions
Recommended Soldering Conditions
Recommendations and precautions are described below.
● Rectagular
●
Type
Recommended soldering conditions for reflow
For soldering (Example : Sn/Pb)
· Reflow soldering shall be performed a maximum of
two times.
· Please contact us for additional information when
used in conditions other than those specified.
· Please measure the temperature of the terminals
and study every kind of solder and printed circuit
board for solderability before actual use.
Preheating
Main heating
Peak
Temperature
140 °C to 160 °C
Above 200 °C
235 ± 5 °C
Time
60 s to 120 s
30 s to 40 s
max. 10 s
For lead-free soldering (Example : Sn/Ag/Cu)
Temperature
Peak
Preheating
Preheating
Main heating
Peak
Heating
Temperature
150 °C to 180 °C
Above 230 °C
max. 260 °C
Time
60 s to 120 s
30 s to 40 s
max. 10 s
Time
● Recommended
soldering conditions for flow
For soldering
Temperature
Time
140 °C to 180 °C
60 s to 120 s
245 ± 5 °C
20 s to 30 s
Preheating
Soldering
● Chip
●
For lead-free soldering
Temperature
Time
150 °C to 180 °C
60 s to 120 s
max. 260 °C
max. 10 s
Resistor Array, Chip Resistor Networks and Chip Attenuator
Recommended soldering conditions for reflow
· Reflow soldering shall be performed a maximum of
two times.
· Please contact us for additional information when
used in conditions other than those specified.
· Please measure the temperature of the terminals
and study every kind of solder and printed circuit
board for solderability before actual use.
For soldering (Example : Sn/Pb)
Preheating
Main heating
Peak
Temperature
140 °C to 160 °C
Above 200 °C
235 ± 5 °C
Time
60 s to 120 s
30 s to 40 s
max. 10 s
For lead-free soldering (Example : Sn/Ag/Cu)
Temperature
Peak
Preheating
Main heating
Peak
Preheating
Heating
Temperature
150 °C to 180 °C
Above 230 °C
max. 260 °C
Time
60 s to 120 s
30 s to 40 s
max. 10 s
Time
●
Flow soldering
We do not recommend flow soldering, because a solder bridge may form.
Please contact us regarding flow soldering of EXBA series.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 59 –
Surface Mount Resistors Safety precautions
Safety Precautions (Common precautions for Surface Mount Resistors)
The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors
in this catalog.
1. Take measures against mechanical stress during and after mounting of Surface Mount Resistors (hereafter called the
resistors) so as not to damage their electrodes and protective coatings.
Be careful not to misplace the resistors on the land patterns. Otherwise, solder bridging may occur.
2. Keep the rated power and ambient temperature within the specified derating curve.
Some circuit boards, wiring patterns, temperatures of heat generated by adjacent components, or ambient
temperatures can become factors in the rise of the temperature of the resistors, regardless of the level of power
applied. Therefore, check the conditions before use and optimize them so as not to damage the boards and peripheral
components.
Make sure to contact us before using the resistors under special conditions.
3. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the
operations of the resistors when installed in your products before use.
Never exceed the rated power. Otherwise, the performance and/or reliability of the resistors may be impaired.
4. Before using halogen-based or other high-activity flux, check the possible effects of the flux residues on the
performance and reliability of the resistors.
5. When soldering with a soldering iron, never touch the resistors'bodies with the tip of the soldering iron. When using a
soldering iron with a high temperature tip, finish soldering as quickly as possible (within three seconds at 350 °C max.).
6. As the amount of applied solder becomes larger, the mechanical stress applied to the resistors increases, causing
problems such as cracks and faulty characteristics. Avoid applying an excessive amounts of solder.
7. When the resistors' protective coatings are chipped, flawed, or removed, the characteristics of the resistors may be
impaired. Take special care not to apply mechanical shock during automatic mounting or cause damage during
handling of the boards with the resistors mounted.
8. Do not apply shock to the resistors or pinch them with a hard tool (e.g. pliers and tweezers). Otherwise, the resistors'
protective coatings and bodies may be chipped, affecting their performance.
9. Avoid excessive bending of printed circuit boards in order to protect the resistors from abnormal stress.
10. Do not immerse the resistors in solvent for a long time. Before using solvent, carefully check the effects of immersion.
11. Transient voltage
If there is a possibility that the transient phenomenon (significantly high voltage applied in a short time) may
occur or that a high voltage pulse may be applied, make sure to evaluate and check the characteristics of
Fixed Metal (Oxide) Film Resistors mounted on your product rather than only depending on the calculated
power limit or steady-state conditions to complete the design or decide to use the resistors.
12. Do not apply excessive tension to the terminals.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 60 –
Metal (Oxide) Film Resistors
Metal (Oxide) Film Resistors
Type: ERG(X)S (Small size)
(0.5 W, 1 W, 2 W, 3 W, 5 W)
ERG(X)F (Anti-heat conducting for PCB)
(1 W, 2 W, 3 W, 5 W)
Features
● Miniaturized
50 % smaller compared to existing models
● Non-flammable
● High Reliability
● Automatic Insertion
● Reference Standards
IEC 60115-2, IEC 60115-4, JIS C 5201-4, EIAJ RC-2138
compliant
● RoHS
Explanation of Part Numbers
Ex.1 : ERX type
1
2
3
E
R
X
Product Code
Metal Film
Resistors
ERX
4
5
6
2
S
Z
7
8
9
10
11
12
J
W
1
R
0
E
Resistance
Resistance Value
Style · Specification
Tolerance
Small size
The
first
two
digits are significant figures
S
J
±5 %
0.5 W to 5 W
of resistance and the third one denotes
G
±2
%
Small size Anti-heat
number of zeros following.
conducting type
Decimal point is expressed by
F (Fe lead wire)
(Ex.) 1R0 : 1.0 Ω
1 W to 5 W
“Z” is added according to resistance.
The matrix of forming and packaging is as shown in the table below.
Forming & Taping matrix
Resistance
Resistance Value Range (Ω)
Part No. Tolerance
Code
Forming / Packaging
12S 1S 2S 3S 5S 1F 2F 3F 5F
ERX□□SZ
ERX□□S
□···□ Straight lead wire type
±5 %
0.10 to 0.18
0.20 to 9.1
○ ○ ○ ○ ○ ○ ○ ○ ○
ERX12S
□···P Cut & Forming type
±2 %
0.10 to 0.91
1.0 to 9.1
○ ○ ○ ○ ○
□···V Axial taping type (Straight lead) ○ ○ ○ ○
ERX1S
±5 %
0.10 to 0.18
0.20 to 9.1
○ ○ ○
U···V Axial taping type (Stand off)
ERX1F
±2 %
0.10 to 0.91
1.0 to 9.1
○ ○ ○
□···E Radial taping type (E type)
ERX2S
±5 %
0.10 to 0.20
0.22 to 9.1
○ ○ ○
W···E Radial taping type (WE type)
ERX2F
±2 %
0.10 to 0.91
1.0 to 9.1
○ ○ ○ ○
□··H Cut & Forming type
ERX3S
±5 %
0.10 to 0.20
0.22 to 9.1
○ ○ ○ ○
S···E Radial taping type (SE type)
ERX3F
±2 %
0.10 to 0.91
1.0 to 9.1
○ ○ ○
ERX5S
±5 %
0.33 to 9.1
—
ERX5F
±2 %
1.0 to 9.1
Power Rating at 70 °C
12
0.5 W
1
1W
2
2W
3
3W
5
5W
The above example 1 shows a small metal film resistor, 2 W power rating, resistance value of 1.0 Ω, tolerance ±5 %, and package of radial taping.
Ex.2 : ERG type
1
2
3
E
R
G
Product Code
Metal Oxide
Film Resistors
ERG
Power Rating at 70 °C
12
0.5 W
1
1W
2
2W
3
3W
5
5W
4
5
6
7
8
9
10
11
12
2
S
J
W
1
0
3
E
Style · Specification
S Small size
0.5 W to 5 W
Small size Anti-heat
conducting type
F
(Fe lead wire)
1 W to 5 W
Resistance Value
The first two digits are significant figures
of resistance and the third one denotes
number of zeros following.
Decimal point is expressed by
(Ex.) 103 : 10 kΩ
The matrix of forming and packaging is as shown in the table below.
Forming & Taping matrix
Forming / Packaging
Code
12S 1S 2S 3S 5S 1F 2F 3F 5F
□···□ Straight lead wire type
○ ○ ○ ○ ○ ○ ○ ○ ○
□···P Cut & Forming type
○ ○ ○ ○ ○
□···V Axial taping type(Straight lead) ○ ○ ○ ○
○ ○ ○
U···V Axial taping type(Stand off)
○ ○ ○
□···E Radial taping type(E type)
○ ○ ○
W···E Radial taping type(WE type)
○ ○ ○ ○
□···H Cut & Forming type
○ ○ ○ ○ ○
S···E Radial taping type(SE type)
○ ○ ○
Resistance
Tolerance
J
±5 %
G
±2 %
The above example 2 shows a small metal oxide film resistor, 2 W power rating, resistance value of 10 kΩ, tolerance ±5 %, and package of radial taping.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 61 –
Metal (Oxide) Film Resistors
Construction
Dimensions in mm (not to scale)
k
Lead wire
type : Cu wire
( SF type
: Fe wire )
High reliable metal oxide film (ERG)
High reliable metal plating film
(ERX)
k
L
fD
fd
Dimensions (mm)
Part No.
Ceramic core
(High thermal conductivity)
0D
L
+0.65
2.3 –0.3
+0.5
30.0
±3.0
+1.50
2.8
±0.5
30.0
±3.0
±1.0
30.0
±1.0
±1.0
ERG(X)12S 6.35 –0.35
Spiralling
turns
ERG(X)1S
Marking
ERG(X)1F
Flame and solvent retardant
End cap
0d
k
9.00 –1.00
ERG(X)2S
ERG(X)2F
12.00 –1.00
+1.50
4.0
ERG(X)3S
ERG(X)3F
15.00
±1.50
5.5
ERG(X)5S
ERG(X)5F
24.00
±1.50
8.0
Mass
(Weight)
[g/pc.]
0.65
±0.05
0.65
±0.05
0.80
±0.05
±3.0
0.80
±0.05
0.66
38.0
±3.0
0.80
±0.05
1.47
38.0
±3.0
0.80
±0.05
3.54
0.26
0.33
Ratings
Part No.
ERG(X)12S
ERG(X)1S
ERG(X)1F
ERG(X)2S
ERG(X)2F
ERG(X)3S
ERG(X)3F
ERG(X)5S
ERG(X)5F
Maximum Dielectric
Maximum
Intermittent Withstanding
Overload
Overload
Voltage
(2)
Voltage
(3)
Voltage
(V)
(V)
(VAC)
Power
Rating
at 70 °C
(W)
Limiting
Element
(1)
Voltage
(V)
0.5
300
600
600
350
1
350
600
600
350
2
350
700
1000
600
3
350
700
1000
1000
5
500
1000
1500
1000
(1) Rated Continuous Working Voltage (RCWV) shall be determined
from RCWV=√Power Rating×Resistance Value or Limiting Element
Voltage listed above whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be
determined from SOTV=2.5×Power Rating or max. Overload
Voltage listed above whichever less.
(3) Intermittent Overload Test Voltage (IOTV) shall be determined from
IOTV=4.0×Power Rating or max. Intermittent Overload Voltage
listed above whichever less.
Res.
Tol.
(4)
(%)
G
J
G
J
G
J
G
J
G
J
(±2)
(±5)
(±2)
(±5)
(±2)
(±5)
(±2)
(±5)
(±2)
(±5)
Resistance
(5)
Range (Ω)
(6)
min.
1
0.2
1
0.2
1
0.22
1
0.22
1
0.33
Standard
T.C.R.
Resistance
–6
(×10 /°C)
Value
max.
22 k
47 k
68 k
100 k
100 k
100 k
100 k
100 k
100 k
100 k
±350
E24
±350
E24
±350
E24
±300
E24
±200
E24
(4) Resistance tolerance is of use besides range listed, please inquire.
(5) Resistance Range Type ERG : >10 Ω
Type ERX : <9.1 Ω
(6) As for the low resistance value range, "Z" is given to the part
number. (Refer to the explanation of part numbers.)
✽ Z type is non standard resistance values.
Code Part No. Res.Tol. Res. Value Range Code Part No. Res.Tol. Res. Value Range
12S
Z
1S
1F
±5 % 0.1 to 0.18 Ω
±2 % 0.1 to 0.91 Ω
±5 % 0.1 to 0.18 Ω
2S
2F
±2 % 0.1 to 0.91 Ω
3S
3F
±2 % 0.1 to 0.91 Ω
Z
±5 % 0.1 to 0.2 Ω
±5 % 0.1 to 0.2 Ω
120
–55 °C
Rated Load (%)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
±2 % 0.1 to 0.91 Ω
70 °C
100
80
60
ERG(X)12S
40
ERG(X)1S, 1F
ERG(X)2S, 2F
ERG(X)3S, 3F
ERG(X)5S, 5F
20
130 °C
0
–60 –40 –20 0
235 °C
20 40 60 80 100 120 140 160 180 200 220 240
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 62 –
Metal (Oxide) Film Resistors Packaging Methods
Taped & Box
Stand-off Taped & Box
ERG(X)□□S□□□□V
ERG(X)□□S□U□□□V
W1
P
P
fd
fd
6.0±0.5
H
H
crush width 0.8 mm (1 W)
1.1 mm (2 W, 3 W)
W
W
Standard
Quantity
(pcs./box)
Part Number
ERG(X) 12S□□□□□V
Taping (mm)
P
50×P
W
±2
52.0
±1.5
±2
52.0
±1.5
250
5.0
±0.3
2,000
250
5.0
±0.3
2,000
Box (mm)
H
W1
—
—
—
—
0d
a
b
c
±0.05
85
80
255
±0.05
85
80
255
0.65
b
ERG(X) 1S□□□□□V
ERG(X) 1S□U□□□V
ERG(X) 2S□□□□□V
ERG(X) 2S□U□□□V
ERG(X) 3S□□□□□V
ERG(X) 3S□U□□□V
±0.3
1,000
5.0
1,000
10.0
±0.5
±2
250
±2
500
0
+0.15
0
12.0–2.0 1.20
52.0
±1.5
74.0
±2.0
—
—
0
+0.15
0
15.5–2.0 1.40
—
23.0
—
0
–2.0
1.4
+0.15
0
0.65
Ma
rkin
g
±0.05
0.80
±0.05
0.80
85
80
255
105
100
325
c
a
Cut & Formed Type
ERG(X)□□S□□□□P
Part Number
fD
f 0.65±0.05 (0.5 W, 1 W)
f 0.80±0.05 (2 W, 3 W, 5 W)
S
L
Upper surface
h of PW board
h2
0.8 (0.5 W, 1 W)
1.0 (2 W, 3 W, 5 W)
1.2±0.2 (0.5 W, 1 W)
1.4±0.2 (2 W, 3 W, 5 W)
Standard
Quantity
(pcs./box)
Dimensions (mm)
0D
L
+0.65
–0.35
2.3
+1.50
2.8
S
12.00 –1.00
+1.50
4.0
ERG(X) 3S□□□□P
1,000
15.00
±1.50
5.5
ERG(X) 5S□□□□P
500
24.00
±1.50
8.0
30.0
1,000
±1.0
ERG(X) 2S□□□□P
20.0
9.00 –1.00
±1.0
1,000
15.0
ERG(X) 1S□□□□P
±1.0
6.35
12.5
1,000
±0.5
ERG(X) 12S□□□□P
10.0
h
+0.5
–0.3
±1.5
4.0
±1.5
4.0
±1.5
6.0
±2.0
6.5
±2.0
7.5
h2
±1.5
4.0
±1.5
±1.5
4.0
±1.5
4.0
±1.5
4.0
±1.5
4.0
±1.5
±1.5
±1.5
±1.5
ERG(X)□F□□□□H
Standard
Quantity
(pcs./box)
L
ERG(X)1F□□□□H
1,000
9.0 –1.0
ERG(X)2F□□□□H
1,000
12.0 –1.0
+1.5
4.0
ERG(X)3F□□□□H
1,000
15.0
±1.5
5.5
ERG(X)5F□□□□H
500
24.0
±1.5
8.0
Part Number
S
L
fD
f 0.80±0.05
Dimensions (mm)
+1.5
h Upper surface
of PW board
h2
0D
S
±0.5
12.5
±1.0
15.0
±1.0
20.0
±1.0
30.0
h
2.8
h2
±1.5
8
±2
4.0
±1.5
±1.5
6
±2
5.0
±2.0
10
±2
5.0
±2.0
10
±2
5.0
±1.5
±1.5
1.0
1.4±0.2
±1.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 63 –
Metal (Oxide) Film Resistors Packaging Methods
For Panasert Automatic Insertion Machine Radial Taped & Box
ERG(X)□□S□□□□E (12S, 1S, 2S)
P
Insulated
Lead
P2
A
fD
F
W1
H0
H1
P1
fD0
P0
Dimensions (mm)
Dimensions (mm)
Dimensions (mm)
32 max.
1S
32 max.
2S
38 max.
12.7±1.0
W
18.0±0.5
P0
12.7±0.3
W1
9.0±0.5
P1
3.85±0.70
P2
6.35±1.00
H0
16.0±0.5
F
5.0±0.8
0D0
4.0±0.2
H1
Dimensions (mm)
12S
P
● Radial
W
fd
A
Dimensions (mm)
+0.65
12S
6.35 –0.35
1S
9.0 –1.0
2S
12.0 –1.0
0d
+1.5
0D
+1.5
+0.5
12S
2.3 –0.3
1S
2.8±0.5
2S
4.0±1.0
0.65±0.05
Tape Package Specifications
Dimensions (mm)
b
Part Number
Marking
Standard Quantity
(pcs./box)
a
b
c
ERG(X) 12S□□□□E
46
130
335
2,000
ERG(X) 1S□□□□E
46
130
335
2,000
ERG(X) 2S□□□□E
49
100
335
1,000
c
a
For Panasert Automatic Insertion Machine Radial Taped & Box
ERG(X)□□S□W□□□E (12S, 1S, 2S, 3S)
Dimensions (mm)
P
P1
P
P0
B
P1
H1
fD
A
F
F
fd
P0
fD0
12.7±1.0
1S, 2S, 3S
30.0±1.0
12S
12.7±0.3
1S, 2S, 3S
15.0±0.3
0D0 12S, 1S, 2S, 3S
12S
A
4.0±0.2
+0.65
6.35 –0.35
+1.5
–1.0
1S
9.0
2S
12.0 –1.0
+1.5
12S
6.35±1.00
3S
15.0±1.5
1S, 2S, 3S
7.5±1.0
12S
11.2 max.
1S
14.0 max.
2S
17.0 max.
12S
3.85±0.70
1S, 2S, 3S
3.75±0.50
12S
5.0±0.5
3S
21.0 max.
1S, 2S, 3S
7.5±0.8
12S
2.3 –0.3
B
+0.5
W
12S, 1S, 2S, 3S
18.0±0.5
W1
12S, 1S, 2S, 3S
9.0±0.5
12S
16.0±0.5
3S
5.5±1.0
H0
1S, 2S
18.0±1.0
12S
00.65±0.05
3S
19.0±1.0
1S, 2S, 3S
00.80±0.05
W
W1
H0
P2
P2
Dimensions (mm)
12S
H1
0D
0d
1S
2.8±0.5
2S
4.0±1.0
+0.6
0
12S
6.5
1S, 2S
6.5
3S
8.0
+1.0
0
+1.0
0
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 64 –
Metal (Oxide) Film Resistors Packaging Methods
For Panasert Automatic Insertion Machine Radial Taped & Box
ERG(X)□F□S□□□E (1F, 2F, 3F)
Dimensions (mm)
P1
B
fD
A
F
fd
fD0
W
W1
H0
P2
P
30.0±1.0
H2
P0
15.0±0.3
0D0
P1
7.5±1.0
P
3.75±0.50
2
H1
H2
Dimensions (mm)
P
4.0±0.2
A
9.0 –1.0
2F
12.0 –1.0
+1.5
F
7.5±0.8
3F
15.0±1.5
18.0±0.5
1F
14 max.
W1
9.0±0.5
2F
17 max.
H0
16.0
3F
21 max.
1F
2.8±0.5
2F
4.0±1.0
B
+1.0
0
1F
7.0
+1.0
0
2F
8.0
+1.0
0
3F
9.0
0D
+1.0
0
3F
0d
● Radial
+1.5
1F
W
H1
P0
1.0±0.3
5.5±1.0
0.80±0.05
Tape Package Specifications
Part No.
ERG(X)12S□W□□□E
ERG(X) 1S□W□□□E
ERG(X) 1F□ S□□□E
ERG(X) 2S□W□□□E
b
ERG(X) 2F□ S□□□E
Marking
a
ERG(X) 3F□ S□□□E
c
Dimensions (mm)
Standard Quantity
(pcs./box)
a
b
c
46
145
325
2,000
49
150
317
1,000
49
150
317
500
49
190
315
500
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 65 –
Metal (Oxide) Film Resistors
Hot-spot Temperature (for Reference)
The temperature of the resistor body increases with the curve below. A touching vinyl wire may cause damages
to resistor element. Do not place vinyl wires around resistors and be sure to consider where the resistors will be
placed.
Measuring position
A
+250
+250
+200
+200
Temperature△T (°C)
Temperature△T (°C)
B
+150
1S-A
+100
1S-B
12S-A
12S-B
+50
0
25
50
Rated Load (%)
75
2F-A
2S-A
+150
2S-B
+100
2F-B
+50
0
100
+250
25
50
Rated Load (%)
75
+250
3F-A
5F-A
5S-A
+200
3S-A
Temperature△T (°C)
Temperature△T (°C)
+200
+150
3S-B
+100
3F-B
+50
0
100
+150
5S-B
+100
5F-B
+50
25
50
Rated Load (%)
75
100
0
25
50
Rated Load (%)
75
100
Safety Precautions
The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors in
this catalog.
1. Transient voltage
If there is a possibility that the transient phenomenon (significantly high voltage applied in a short time) may
occur or that a high voltage pulse may be applied, make sure to evaluate and check the characteristics of
Metal(Oxide) Film Resistors (hereafter called the resistors) mounted on your product rather than only depending
on the calculated power limit or steady-state conditions to complete the design or decide to use the resistors.
2. The resistors are covered with a special coating. Do not apply shock or vibration to them, or pinch them with
long-nose pliers. Otherwise, the resistors may be damaged.
3. Do not apply excessive tension to the lead-connected sections. When bending the lead wire, do not apply
excessive stress to the resistors and provide the wire with a natural curvature.
4. Do not brush the resistors during or after the cleaning process, which may be conducted after soldering.
Otherwise, the coating film may be damaged.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 66 –
Metal (Oxide) Film Resistors
(Data for Reference)
Pulse Characteristics (Usual)
PP
:
VP
:
t
:
T
:
VR
:
P
:
R
:
Vp max. :
PP (VP)
t
Pulse limit power (W)
Pulse limit voltage (V)
Pulse continuous time (s)
Period (s)
Rated voltage (V)
Rated power (W)
Resistance value (Ω)
Max. pulse limit voltage (V)
T
Withstand pulse limit power is calculated by the next
method.
PP = K·P·T/t
VP =√K·P·R·T/t
Reference to the right about a fixed number of VP max.
● T>1(s) → T=1(s)
● T/t>100 → T/t=100
● PP<P → P stands for PP
Part No.
K
Vp max. (V)
ERG(X) 12S
0.5
600
ERG(X) 1S
0.5
600
ERG(X) 2S
0.5
700
ERG(X) 3S
0.5
700
ERG(X) 5S
0.5
1000
(VP<VR → VR stands for VP)
● Added voltage<Vp max.
● PP or VP is referent value
Conditions:
Pulse added time=1000 h
Resistance change=±5 %
Room temperature
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 67 –
Anti-Pulse Power Resistors
Anti-Pulse Power Resistors
Type: ERGD
(0.5 W, 1 W, 2 W, 3 W)
Features
● Miniaturized
● Non-flammable
● Anti-Pulse
Characteristic
Insertion
● RoHS compliant
● Automatic
Explanation of Part Numbers
1
2
3
E
R
G
Product Code
Anti-Pulse
Power Resistors
4
Power Rating
12
0.5 W
1
1W
2
2W
3
3W
5
6
7
2
D
J
Resistance
Tolerance
G
±2 %
J
±5 %
8
Resistance Value
The first two digits are
significant figures of
resistance and the third
one denotes number of
zeros following.
(Ex.) 224 : 220 kΩ
Code
□···□
□···V
□···P
U···V
□···E
W···E
9
10
11
2
2
4
12
Forming &
Taping matrix
12D 1D 2D 3D
Straight lead wire type
○ ○ ○ ○
Axial paping type (Straight lead) ○ ○ ○ ○
Cut & Forming type
○ ○ ○ ○
Axial paping type (Stand off)
○ ○
Radial Taping type (E type)
○ ○ ○
Radial Taping type (WE type)
○ ○ ○ ○
Forming / Packaging
The above example shows an anti-pulse resistor, 2 W power rating, resistance value of 220 k ohms, tolerance ±5 %, and package of standard bulk
packing.
Construction
High reliable special film
Dimensions in mm (not to scale)
Lead wire
k
k
L
fD
fd
Ceramic core
(High thermal conductivity)
Dimensions (mm)
Part No.
Spiralling
turns
0D
L
Marking
0d
k
+0.65
2.3 –0.3
+0.5
30.0
+1.50
2.8
±0.5
30.0
12.00 –1.00
+1.50
4.0
±1.0
30.0
±1.50
5.5
±1.0
38.0
ERG12D
6.35 –0.35
ERG1D
9.00 –1.00
ERG2D
ERG3D
15.00
±3.0
0.65
±3.0
0.65
±3.0
0.80
±3.0
0.80
Mass
(Weight)
[g/pc.]
±0.05
0.26
±0.05
0.33
±0.05
0.66
±0.05
1.47
Flame and solvent retardant
End cap
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 68 –
Anti-Pulse Power Resistors
Ratings
Maximum
Dielectric
Maximum
Intermittent Withstanding
Overload
Overload
Voltage
(2)
Voltage
(3)
Voltage
(V)
(VAC)
(V)
Power
Rating
at 70 °C
(W)
Limiting
Element
(1)
Voltage
(V)
ERG12D
0.5
400
800
800
500
ERG1D
1
500
1000
1000
500
ERG2D
2
500
1000
1000
700
ERG3D
3
500
1000
1000
700
Part No.
Resistance
(4)
Range (Ω)
Res.
Tol.
(%)
J
G
J
G
J
G
J
G
(±5)
(±2)
(±5)
(±2)
(±5)
(±2)
(±5)
(±2)
Standard
Resistance
Value
min.
max.
51 k
240 k
E24
110 k
330 k
E24
110 k
510 k
E24
110 k
750 k
E24
(1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating×Resistance Value or Limiting Element Voltage listed
above whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5×Power Rating or max. Overload Voltage listed above
whichever less.
(3) Intermittent Overload Test Voltage (IOTV) shall be determined from IOTV=4.0×Power Rating or max. Intermittent Overload Voltage listed above
whichever less.
(4) Resistance tolerance and resistance range is of use besides range listed, please inquire.
120
–55 °C
Rated Load (%)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
70 °C
100
80
ERG1D ~ 3D
60
ERG12D
40
20
130 °C
0
–60 –40 –20 0
235 °C
20 40 60 80 100 120 140 160 180 200 220 240
Ambient Temperature (°C)
■ As for Packaging Methods and / or cut formed leads,
Please see Metal (Oxide) Film Resistors Packaging Methods
Safety Precautions
The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors
in this catalog.
1. Transient voltage
If there is a possibility that the transient phenomenon (significantly high voltage applied in a short time) may
occur or that a high voltage pulse may be applied, make sure to evaluate and check the characteristics of
Anti-Pulse Power Resistors (hereafter called the resistors) mounted on your product rather than only depending on
the calculated power limit or steady-state conditions to complete the design or decide to use the resistors.
2. The resistors are covered with a special coating. Do not apply shock or vibration to them, or pinch them with
long-nose pliers. Otherwise, the resistors may be damaged.
3. Do not apply excessive tension to the lead-connected sections. When bending the lead wire, do not apply
excessive stress to the resistors and provide the wire with a natural curvature.
4. Do not brush the resistors during or after the cleaning process, which may be conducted after soldering.
Otherwise, the coating film may be damaged.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 69 –
Metal Film Resistors, Low Resistance Value
Metal Film Resistors
Type: ERXL (Low Resistance Value)
(0.5 W, 1 W, 2 W)
Features
● Miniaturized
● Non-flammable
● Automatic
● RoHS
Insertion
compliant
Explanation of Part Numbers
1
2
3
E
R
X
Product Code
ERX
Metal Film
Resistors
4
5
6
7
2
L
J
Special Feature
Power Rating
12 0.5 W
1
1W
2
2W
L
Small size
Low
resistance
value
Resistance
Tolerance
J
±5 %
8
9
10
11
4
7
M
Resistance Value
The first two digits are
significant figures of
resistance and it shows
by the unit of the "mΩ".
Decimal point is
expressed by
M as 47 mΩ = 47M.
Code
□···□
□···V
□···P
□···E
W···E
12
Forming &
Taping matrix
12L 1L 2L
Straight lead wire type
○ ○ ○
Axial paping type (Straight lead) ○ ○ ○
Cut & Forming type
○ ○ ○
Radial Taping type (E type)
○ ○ ○
Radial Taping type (WE type)
○ ○ ○
Forming / Packaging
The above example shows a small size and low resistance value metal film resistor, 2 W power rating, resistance value of 47 m ohms, tolerance ±5 %,
and package of standard bulk packing.
Construction
Dimensions in mm (not to scale)
High reliable metal plating film
Lead wire
k
k
L
fD
fd
Ceramic core
(High thermal conductivity)
Spiralling
turns
Marking
Dimensions (mm)
Part No.
0D
L
0d
k
+0.65
2.3 –0.3
+0.5
30.0
+1.50
2.8
±0.5
30.0
4.0
±1.0
30.0
ERX12L
6.35 –0.35
ERX1L
9.00 –1.00
ERX2L
12.00 –1.00
Mass
(Weight)
[g/pc.]
±3.0
0.65
±0.05
0.26
±3.0
0.65
±0.05
0.33
±3.0
0.80
±0.05
0.66
Flame and solvent retardant
End cap
+1.50
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 70 –
Metal Film Resistors, Low Resistance Value
Ratings
Part No.
Power
Rating
at 70 °C
(W)
(1)
Dielectric
Withstanding
Voltage
(VAC)
Res. Tol.
(2)
(%)
Resistance
(2)
Range (Ω)
min.
max.
ERX12L
0.5
350
J (±5)
22 m
82 m
ERX1L
1
350
J (±5)
22 m
82 m
ERX2L
2
600
J (±5)
22 m
82 m
Standard
Resistance
Value
T.C.R.
–6
(×10 /°C)
E12
22 to 39 mΩ=±1000
47 to 82 mΩ=± 500
E12
E12
(1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating×Resistance Value.
(2) Resistance tolerance and resistance range is of use besides range listed, please inquire.
120
–55 °C
Rated Load (%)
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
70 °C
100
80
ERX1L, 2L
60
ERX12L
40
20
130 °C
0
–60 –40 –20 0
235 °C
20 40 60 80 100 120 140 160 180 200 220 240
Ambient Temperature (°C)
■ As for Packaging Methods and / or cut formed leads,
Please see Metal (Oxide) Film Resistors Packaging Methods
Safety Precautions
The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors
in this catalog.
1. Transient voltage
If there is a possibility that the transient phenomenon (significantly high voltage applied in a short time) may
occur or that a high voltage pulse may be applied, make sure to evaluate and check the characteristics of
Metal Film Resistors (hereafter called the resistors) mounted on your product rather than only depending on
the calculated power limit or steady-state conditions to complete the design or decide to use the resistors.
2. The resistors are covered with a special coating. Do not apply shock or vibration to them, or pinch them with
long-nose pliers. Otherwise, the resistors may be damaged.
3. Do not apply excessive tension to the lead-connected sections. When bending the lead wire, do not apply
excessive stress to the resistors and provide the wire with a natural curvature.
4. Do not brush the resistors during or after the cleaning process, which may be conducted after soldering.
Otherwise, the coating film may be damaged.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 71 –
Metal Film Fusing Resistors
Metal Film Fusing Resistors
Type: ERQA
ERQZ
(0.25 W, 0.5 W, 1 W, 2 W coating type )
Features
● Accurate
fusing
size and lightweight
● Uniform quality, consistent performance and reliability
● Flame retardant, utilizing exclusive silicon insulation material
● Reference Standard
EIAJ RC-2125
● RoHS compliant
● Small
Explanation of Part Numbers
1
2
3
E
R
Q
Product Code
Metal Film
Fusing Resistors
Power Rating at
70 °C amb.
0.25 W
14
0.5 W
12
1
2
1W
2W
4
5
6
7
8
9
10
11
2
A
B
J
1
0
1
Special Feature
A
Standard
Z Less than 2 Ω
AB
Z
Resistance
Tolerance
J
±5 %
Standard
Less than 2 Ω
Resistance Value
The first two digits are
significant figures of
resistance and the third
one denotes number of
zeros following.Decimal
point is expressed by R as
2.2=2R2.
12
Suffix for Packaging and/or
Cut & Formed Leads
Nil
P
P···S
E
W···E
Std.bulk packing
P type cut & formed
P···S type cut & formed
Radial Taped & Box
Radial Taped & Box
The above example shows a standard Metal Film Fusing Resistors, 2 W power rating, resistance value of 100 Ω, tolerance of ±5 %, and package of
standard bulk packing.
Construction
Lead wire
Metal alloy film
Spiraling turns
Insulative lacquer
Ceramic core
Marking
End cap
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 72 –
Metal Film Fusing Resistors
Ratings
Part No.
ERQ14Z
ERQ14A
ERQ12Z
ERQ12A
ERQ1Z
ERQ1AB
ERQ2Z
ERQ2AB
Power
Rating
at 70°C
(W)
Maximum
Dielectric
Open Maximum With- Resistance
Circuit Overload standing Tolerance
(1)
Voltage
(%)
Voltage Voltage
(V)
(V)
0.25
200
0.5
250
1
250
2
250
3 times of
rated
(2)
voltage
AC 350
J (± 5)
AC 350
J (± 5)
AC 600
J (± 5)
AC 1000
J (± 5)
Resistance
Range (Ω)
min.
max.
1.0
2.0
1.0
2.0
1.0
2.0
1.0
2.0
1.8
470
1.8
560
1.8
560
1.8
560
Standard Marking
Mass
T.C.R.
Resistance Method (Weight)
-6
(×10 /°C)
Values
on Body [g/pc.]
Color
code
Stamp
Color code
0.24
±350
E24
±350
E24
±350
E24
Stamp
0.64
±350
E24
Stamp
1.54
0.32
(1) Maximum Open Circuit Voltage: Referring to the maximum value of the voltage applied between terminals of the resistor when the resistor is
opened in an electric circuit 1000 times power rating or voltage specified above whichever less is regarded as the maximum open circuit voltage.
(2) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Value
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the figure on the right.
120
Rated load (%)
100
–30 °C
70 °C
ERQ1
ERQ2
80
60
40
ERQ14
ERQ12
150 °C
20
0
–60 –40 –20 0
130 °C
20 40 60 80 100 120 140 160 180 200 220
Ambient temperature (°C)
Performance Specifications
Characteristics
Specifications
Rated
Power
Res. Value
(Ω)
Test Methods
Limit
Open within
30 seconds at
30 times the
rated power
0.25 W
0.5 W
1 to 1.8
Fusing
Characteristics
1W
2W
Open within
30 seconds at
25 times the
rated power
0.25 W
0.5 W
1W
2W
2 to 9.1
Open within
30 seconds at
16 times the
rated power
0.25 W
10 to 470
0.5 W
1W
2W
The test potential shall be preadjusted using a dummy
re sis tor and then be subjected to the test specimens.
The potential shall be readjusted within two seconds
to reach the exact value of specified current. This test
shall be made under the conditions at 20 °C and 65
% RH (or at a temperature of 5 °C to 35 °C and 45 to
85 % RH, only when any doubt may not be caused),
and the use of sta bi lized pow er source is sug gest ed.
Fus ing time shall be mea sured as the duration un til
the circuit current is decreased to a 1/50 the initial test
current or less.
Open within
30 seconds at
10 to 560 12 times the
rated power
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 73 –
Metal Film Fusing Resistors
Dimensions in mm (not to scale)
Dimensions (mm)
Part No.
l
fD
l
fd
L
0D
L
+1.5
–1.0
2.3
0d
k
±0.5
30.0
±0.5
30.0
±1.0
30.0
±1.0
38.0
ERQ14
6.3
ERQ12
9.0 –1.0
+1.5
2.8
ERQ1
12.0 –1.0
+1.5
4.0
ERQ2
15.0
±1.5
5.5
±3.0
0.65
±0.05
±3.0
0.65
±3.0
0.80
±3.0
0.80
±0.05
±0.05
±0.05
Explanation of Marking
Type ERQ14, ERQ12 (0.25 W, 0.5 W)
1st significant
figure
Q Shows Fuse Resistor
2nd significant figure
White color
shows Fuse Resistor
1W
100ΩJ
711
Q
Resistance tolerance
Symbol
Power rating
Manufacturing
Series No.
105
Multipier
Type ERQ1, ERQ2 (1W, 2W)
Date code
(Year, Month, Week)
Resistance value and tolerance
Cut & Formed Type
ERQ□□AJ□□□P
ERQ□□ZJ□□□P
S
fD
4.0±1.0
h
f0.65±0.05
L
0.8
1.2±0.2
3 max.
Part No.
Power Rating
at 70 °C
(W)
Standard
Q’ty/Packing
(pcs.)
Dimensions (mm)
0D
L
+1.5
–1.0
2.3
+1.5
2.8
ERQ14□J□□□P
0.25
2,000
6.3
ERQ12□J□□□P
0.5
2,000
9.0 –1.0
ERQ□ABJP□□□S
ERQ□ZJP□□□S
S
10.0
±0.5
12.5
h
±0.5
S
±1.5
4.0
±1.5
±1.5
4.0
±1.5
fD
1.0
1.4±0.2
4.0±1.5
h
f0.80±0.05
L
3.5 max.
Part No.
Power Rating
at 70 °C
(W)
Standard
Q’ty/Packing
(pcs.)
Dimensions (mm)
0D
L
+1.5
–1.0
4.0
±1.5
5.5
ERQ1□□JP□□□S
1
1,000
12.0
ERQ2□□JP□□□S
2
1,000
15.0
S
15.0
±1.0
20.0
h
±1.0
±1.5
6.0
±1.5
±2.0
6.5
±1.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 74 –
Metal Film Fusing Resistors
For Panasert Automatic Insertion Machine Radial Taped & Box
ERQ□□AJ□□□E
ERQ□□ZJ□□□E
(14A/14Z, 12A/12Z, 1AB/1Z)
Insulated
Lead
P
P2
H1
A
D
P1
W1
H0
F
W
fd
fD0
P0
Dimensions (mm)
Dimensions (mm)
Dimensions (mm)
P
12.7±1.0
W
18.0±0.5
P0
12.7±0.3
W1
9.0±0.5
P1
3.85±0.70
P2
6.35±1.00
H0
16.0±0.5
F
5.0±0.8
0D0
4.0±0.2
● Radial
14A/14Z
H1
Dimensions (mm)
12 max.
12A/12Z 15.5 max.
1AB/1Z
Dimensions (mm)
+0.65
–0.35
14A/14Z 6.35
A
19 max.
12A/12Z
9.0+1.5
–1.0
1AB/1Z
12.0+1.5
–1.0
0d
14A/14Z 2.3±0.5
D
12A/12Z 2.8±0.5
1AB/1Z 4.0±1.0
0.65±0.05
Tape Packaging Methods
Dimensions (mm)
a
b
c
Standard Quantity
(pcs./box)
46
130
335
2,000 pcs./box
46
130
335
2,000 pcs./box
49
100
335
1,000 pcs./box
Part Number
b
ERQ14AJ□□□E
ERQ14ZJ□□□E
ERQ12AJ□□□E
ERQ12ZJ□□□E
ERQ1ABJ□□□E
ERQ1ZJ□□□E
Marking
c
a
For Panasert Automatic Insertion Machine Radial Taped & Box
ERQ□□A/ZJW□□□E (14A/14Z, 12A/12Z, 1AB/1Z)
P1
Dimensions (mm)
P
P
B
fD
A
H1
P0
P1
F
H0
P2
W1
P2
W
F
fd
P0
12.7±1.0
12A/12Z, 1AB/1Z 30.0±1.0
14A/14Z
H1
12.7±0.3
12A/12Z, 1AB/1Z 15.0±0.3 0D0
14A/14Z
6.35±1.00
12A/12Z, 1AB/1Z
7.5±1.0
14A/14Z
3.85±0.70
A
12A/12Z, 1AB/1Z 3.75±0.50
14A/14Z
5.0+0.6
–0.2
12A/12Z, 1AB/1Z
7.5+0.6
–0.2
W
18.0±0.5
W1
9.0±0.5
H0
fD0
14A/14Z
Dimensions (mm)
B
0D
14A/14Z
6.5+0.6
0
12A/12Z
6.5+1.0
0
1AB/1Z
6.5+1.0
0
4.0±0.2
14A/14Z
6.35+0.65
–0.35
12A/12Z
9.0+1.5
–1.0
1AB/1Z
12.0+1.5
–1.0
14A/14Z
11.2 max.
12A/12Z
14 max.
1AB/1Z
17 max.
14A/14Z
2.3+0.5
–0.3
12A/12Z
2.8±0.5
14A/14Z
16.0±0.5
1AB/1Z
4.0±1.0
12A/12Z
18.0±1.0
14A/14Z
0.65±0.05
1AB/1Z
18.0±1.0
0d
12A/12Z, 1AB/1Z 0.80±0.05
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 75 –
Metal Film Fusing Resistors
Fusing Characteristics (Constant Voltage Circuit)
This data is for reference only, specifications should be verified in written form with the engineering division.
ERQ14A
200
ERQ12A
200
2.0 to 9.1 (Ω)
2.0 to 9.1 (Ω)
10 to 560 (Ω)
100
100
50
50
Fusing time (s)
Fusing time (s)
10 to 470 (Ω)
30
10
5
1
30
10
5
0
7
9
12
16
20
25
Multiple of the power rating
ERQ1AB
200
1
30
0
9
ERQ2AB
200
2.0 to 9.1 (Ω)
7
10 to 560 (Ω)
100
50
50
Fusing time (s)
Fusing time (s)
30
2.0 to 9.1 (Ω)
10 to 560 (Ω)
100
30
10
5
1
12
16
20
25
Multiple of the power rating
30
10
5
0
7
9
12
16
20
25
Multiple of the power rating
1
30
0
7
9
12
16
20
25
Multiple of the power rating
30
Hot Spot Temperature (for reference)
Temperature rise △T (K)
600
500
2AB
400
Measuring point
1AB
300
12A
200
100
14A
0
0
1
2
3
4
5
6
7
8
Multiple of the power rating
9
10
11
12
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 76 –
Metal Film Fusing Resistors
Safety Precautions
The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors
in this catalog.
1. Checking the fusing conditions
1) Fusing characteristics differ depending on the type, shape, and resistance. Check the fusing conditions before
selecting the type of Metal Film Fusing Resistors (hereafter called the fusing resistor) to be used.
2) Use the fusing resistors under the maximum open circuit voltage. Otherwise, arcing may occur when a voltage
much higher than the rated one is applied in the event of an abnormality in the circuit, or when a high voltage
is applied after fusing.
3) Under abnormal conditions of a constant voltage circuit, a current of about 2 or 3 times the initial abnormal
current passes through, accelerating the speed at which the fusing resistors blows. When using a constant
current circuit, carefully check the conditions because the fusing resistors may not blow in a constant current
circuit.
2. Checking for pulse voltage, impact voltage, and transient voltage
Make sure to evaluate and check the fusing resistors mounted on your product if they are to be mounted on a
circuit that generates an impact voltage, or if there is a possibility that the transient phenomenon (significantly
high voltage applied in a short time) may occur or that a pulse voltage with a high peak voltage may be applied.
Make sure to consult our sales staff before using the fusing resistors under special conditions.
3. Conditions of use in a steady state
Make sure that the load conditions have a sufficient allowance for the power derating curve. The characteristics of
the fusing resistors are set by using a constant voltage circuit.
4. The solvent resistance of the fusing resistors is not assured. If you use a solvent for cleaning after soldering or
other processes, make sure to consult our sales staff before use and per form a prior test and evaluation to
ensure that the solvent will not affect the reliability of the fusing resistors.
(Data for Reference)
Pp (Vp)
Pulse Characteristics (Usual)
t
T
PP
VP
t
T
VR
P
R
Vp max.
:
:
:
:
:
:
:
:
Withstand pulse limit power is calculated by the next
method.
PP = K · P · T/t
VP = √ K · P · R · T/t
Reference to the right about a fixed number of VP max.
Pulse limit power (W)
Pulse limit voltage (V)
Pulse continuous time (s)
Period (s)
Rated voltage (V)
Rated power (W)
Resistance value (Ω)
Max. pulse limit voltage (V)
Part No.
K
Vp max. (V)
ERQ14A
0.6
200
ERQ12A
0.6
250
ERQ1AB
0.6
250
ERQ2AB
0.4
250
● T>1(s) → T=1(s)
● T/t>100 → T/t=100
● PP<P → P stands for PP
(VP<VR → VR stands for VP)
● Added voltage<Vp max.
● PP or VP is reference value
Conditions : Pulse added time=1000 h, Resistance change=±5 %
Room temperature
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 77 –
Fixed Resistors Appendix
Standard for Resistance Value, Resistance Tolerance and Color Code
Basis Standard
IEC Publication 60062 : Marking codes for resistors and capacitors.
IEC Publication 60063 : Preferred number series for resistors and capacitors.
JIS C 5062 : Marking codes for resistors and capacitors.
JIS C 5063 : Preferred number series for resistors and capacitors.
Resistance Values
The resistance values are notched by “Ratio” below in each series.
Resistance Tolerance
(Standard)
Series
Ratio
±20 %
6
±10 %
12
± 5%
24
E48
± 2%
48
E96
± 1%
96
E6
E12
E24
Remarks
√10=1.46
√10=1.21
√10=1.10
√10=1.05
Please refer to standard resistance values
shown on this catalog.
√10=1.02
How to express the resistance value with a Panasonic part number
The resistance value expressed in ohms is identified by a three digit number or a four digit number.
The last digit specifies the number of zeroes to follow.
The letter “R” shall be used as the decimal point for less than 10 Ω.
The examples of a three digit number
The examples of a four digit number
Resistance Code
Value in ohms
Resistance Code
Value in ohms
R56
5R6
100
271
102
273
104
275
106
107
0.56
5.6
10
270
1k
27 k
100 k
2.7 M
10 M
100 M
R562
5R62
56R2
1000
2711
1002
2713
1004
2715
1006
0.562
5.62
56.2
100
2.71 k
10 k
271 k
1M
27.1 M
100 M
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 78 –
Fixed Resistors Appendix
How to express the resistance tolerance with a Panasonic part number
The resistance tolerance is identified by a single letter in accordance with the following table and the code is
placed just before the resistance code in the following examples.
Tolerance Code
Tolerance
(%)
W
B
C
D
F
G
J
K
M
±0.05
±0.1
±0.25
±0.5
±1
±2
±5
±10
±20
Examples
W1001
B1001
C1001
D1001
F1001
G1001
J101
K101
M101
: 1000 Ω±0.05 %
: 1000 Ω±0.1 %
: 1000 Ω±0.25 %
: 1000 Ω±0.5 %
: 1000 Ω±1 %
: 1000 Ω±2 %
: 100 Ω±5 %
: 100 Ω±10 %
: 100 Ω±20 %
Color code indication for the resistance value and the tolerance
Fixed resistors whose resistance value and tolerance are indicated by color code follow the standard below.
Color code
Color
First digit
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Gray
White
Gold
Silver
None
Second digit
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
Third digit
0
1
2
3
4
5
6
7
8
9
1
10
2
10
3
10
4
10
5
10
6
10
7
10
–1
10
–2
10
Indication example
Color code of 5 color bands
When the standard resistance value follows E48 series or 96
series, color code of the resistors are indicated by five color
bands. Example below is 154 kΩ.
Resistance tolerance
%
Code
±1
±2
±0.05
F
G
W
±0.5
±0.25
±0.1
D
C
B
±5
±10
±20
J
K
M
Color code of 4 color bands
When the standard resistance value follows E6 series, 12
series or 24 series, color code of the resistors are indicated
by four color bands. Example below is 15 kΩ.
Example 1
Example 2
1st Color 2nd Color 3rd Color 4th Color 5th Color
Brown
(1)
Multiplier
Green
(5)
Yellow
(4)
Orange
(1000)
Brown
(±1 %)
1st Color
2nd Color
3rd Color
4th Color
Brown
(1)
Green
(5)
Orange
(1000)
Gold
(±5 %)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 79 –
Fixed Resistors Appendix
Standard Resistance Values
E6
10
E12
10
E24
10
E48
100
E96
100
E6
E12
E24
22
22
22
E48
215
102
105
110
E6
E12
E24
47
47
47
E48
464
221
105
226
107
11
E96
215
475
226
487
232
110
237
E96
464
487
499
237
51
511
511
24
243
113
115
115
249
118
12
536
255
121
261
124
536
549
127
13
127
274
287
133
15
30
140
301
316
147
274
590
287
62
619
33
619
634
301
316
590
604
649
649
665
68
68
68
681
324
33
562
576
309
150
154
562
294
143
147
56
280
137
140
56
27
130
133
261
267
27
15
249
12
121
15
523
681
698
33
332
154
332
715
340
158
715
732
16
162
348
162
348
75
750
357
165
750
768
36
169
365
169
365
787
374
174
806
82
178
18
383
178
39
18
383
825
392
402
187
825
845
402
866
412
191
196
82
39
182
187
787
422
196
422
866
887
91
909
909
43
20
432
200
205
442
205
442
453
210
931
953
953
976
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
– 80 –
CAUTION AND WARNING
1. The electronic components contained in this catalog are designed and produced for use in home electric appliances, office equipment, information equipment,
communications equipment, and other general purpose electronic devices.
Before use of any of these components for equipment that requires a high degree of safety, such as medical instruments, aerospace equipment, disaster-prevention
equipment, security equipment, vehicles (automobile, train, vessel),
please be sure to contact our sales representative.
2. When applying one of these components for equipment requiring a high degree of safety, no matter what sort of application it might be, be sure to install a protective
circuit or redundancy arrangement to enhance the safety of your equipment. In addition, please carry out the safety test on your own responsibility.
3. When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance.
4. Technical information contained in this catalog is intended to convey examples of typical performances and/or applications and is not intended to make any
warranty with respect to the intellectual property rights or any other related rights of our company or any third parties nor grant any license under such rights.
5. In order to export products in this catalog, the exporter may be subject to the export license requirement under the Foreign Exchange and Foreign Trade Law of
Japan.
6. No ozone-depleting substances (ODSs) under the Montreal Protocol are used in the manufacturing processes of Automotive & Industrial Systems Company, Panasonic
Corporation.
● Please contact
● Factory
Device Solutions Business Division
Automotive & Industrial Systems Company
Panasonic Corporation
1006 Kadoma, Kadoma City, Osaka 571-8506,
JAPAN
The information in this catalog is valid as of April 2016.