Chip Resistor Networks Chip Resistor Networks Type: EXBD EXBE EXBA EXBQ Features ● ● ● ● High density placing for digital signal circuits · Bussed 8 or 15 resistors for pull up/down circuits EXBD: 3.2 mm × 1.6 mm × 0.55 mm, 0.635 mm pitch EXBE: 4.0 mm × 2.1 mm × 0.55 mm, 0.8 mm pitch EXBA: 6.4 mm × 3.1 mm × 0.55 mm, 1.27 mm pitch EXBQ: 3.8 mm × 1.6 mm × 0.45 mm, 0.5 mm pitch · Available direct placing on the bus line by means of half pitch spacing without through-holes on PWB (“High density placing” is shown below) High speed mounting using conventional placing machine Reference Standard…IEC 60115-9, JIS C 5201-9, EIAJ RC-2130 RoHS compliant [High density placing] Pull up resistors Direct placement on the bus line VCC EXBE10C EXBA10P VCC VCC IC IC IC IC IC IC No through hole Through holes 0.4 mm pitch 0.635 mm pitch ■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers Product Code Thick Film Resistor Network 1 2 3 4 5 6 7 8 9 10 11 E X B E 1 0 C 1 0 3 J Dimension Code of Chip Resistor Network Code D E A Q Inch 1206 1608 2512 1506 Dimensions 3.2 mm×1.6 mm 4.0 mm×2.1 mm 6.4 mm×3.1 mm 3.8 mm×1.6 mm Number of Terminals 10(EXBD,E,A) 16(EXBQ) Circuit Configuration Code C P P E Common Terminal Position Center common circuit (EXBD, EXBE) Diagonal common circuit (Terminal 5 and Terminal 10) (EXBA) One side common circuit (Terminal 16) (EXBQ) Diagonal common circuit (Terminal 1 and Terminal 6) (EXBA) Resistance Value The first two digits are significant figures of resistance value and the third one denotes the number of zeros following. Resistance Tolerance ±5 % J 12 Suffix for Special Requirements Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2014 Chip Resistor Networks Construction (Example : EXBD) Protective coating Protective coating Electrode (Inner) Alumina substrate Electrode (Outer) Thick film resistive element Electrode (Between) Electrode (Inner) Alumina substrate Thick film resistive element Dimensions in mm (not to scale) 0.35±0.15 0.35±0.15 0.55±0.10 1.27±0.10 6.4±0.2 472 1.6±0.2 3.1±0.2 I03 0.5±0.1 0.55±0.10 0.5±0.2 0.35±0.20 EXBA10P 0.45±0.10 3.8±0.2 EXBA10E 0.30±0.15 0.4±0.2 I03 0.15 +0.15 –0.05 0.3±0.1 0.15 +0.15 –0.05 0.8±0.1 4.0±0.2 0.3±0.2 0.3±0.2 0.25±0.20 0.25±0.20 0.5±0.2 0.35±0.20 I03 f0.3 +0.1 –0.2 0.5±0.2 0.5±0.2 0.25±0.10 0.40±0.15 0.3±0.1 0.25±0.10 0.55±0.10 0.3±0.2 0.5±0.2 0.635±0.10 3.20±0.15 0.2±0.1 0.40±0.15 0.2±0.1 1.60±0.15 0.3±0.2 EXBQ 0.2±0.1 0.4±0.2 0.4±0.2 0.2±0.1 EXBA 0.7±0.2 0.25±0.15 EXBE 0.5±0.2 f0.3 +0.1 –0.2 2.1±0.2 EXBD 0.33±0.15 f0.2±0.1 0.2±0.1 0.15 +0.20 –0.05 I03 Mass (Weight)[1000 pcs.] : 10 g Mass (Weight)[1000 pcs.] : 16 g Mass (Weight)[1000 pcs.] : 40 g Mass (Weight)[1000 pcs.] : 9 g Circuit Configuration EXBD, EXBE EXBA 10 9 8 7 1 EXBQ EXBA10E EXBA10P 10 9 8 7 6 10 9 8 7 6 16 15 14 13 12 11 10 9 1 2 3 4 5 1 2 3 4 5 1 6 2 3 4 5 2 3 4 5 6 7 8 Ratings Item Series Resistance Range Resistance Tolerance Number of Terminals Number of Resistors Power Rating at 70 °C (1) Limiting Element Voltage (2) Maximum Overload Voltage T. C. R. Category Temperature Range Specifications EXBE EXBA 47 Ω to 1 MΩ (E12) ±5% 10 terminals 8 element 0.05 W/element 0.063 W/element 25V 50 V 50 V 100 V –6 ±200 × 10 / °C –55 °C to +125 °C EXBD EXBQ 100 Ω to 470 kΩ (E6 series) 16 terminals 15 element 0.025 W/element 25V 50 V Power Derating Curve For resistors operated in ambient temperatures above 70 °C, power rating shall be derated in accordance with the figure on the right. Rated Load (%) (1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Value, or Limiting Element Voltage listed above, whichever less. (2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determinedfrom SOTV=2.5 × RCWV✽ or Maximum Overload Voltage listed above whichever less. 100 –55 °C 70 °C 80 60 40 20 125 °C 0 –60 –40 –20 0 20 40 60 80 100120140160180 Ambient Temperature (°C) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2014