KSM5305 KERSMI ELECTRONIC CO.,LTD. -55V P-channel MOSEETS Description This P-channel MOSFETS use advanced trench technology and design to provide excellent RDS(on) with low gate charge. It can be used in a wide variety of applications. Features BVDSS -55V 1) 2) 3) 4) RDSON ID 0.06Ω -31A Low gate charge. Green device available. Advanced high cell denity trench technology for ultra RDS(ON) Excellent package for good heat dissipation. TO-220 Absolute Maximum Ratings TC=25℃,unless otherwise noted Symbol Parameter Ratings Units VDS Drain-Source Voltage -55 VGS Gate-Source Voltage ±20 V V Continuous Drain Current-1 -31 Continuous Drain Current-T=100℃ -22 Pulsed Drain Current2 -110 EAS Single Pulse Avalanche Energy3 280 PD Power Dissipation4 110 TJ, TSTG Operating and Storage Junction Temperature Range -55 to +175 ID A mJ W ℃ Thermal Characteristics www.kersemi.com 1 KSM5305 KERSMI ELECTRONIC CO.,LTD. -55V P-channel MOSEETS Symbol Parameter Ratings RƟJC Thermal Resistance ,Junction to Case1 1.4 RƟJA Thermal Resistance, Junction to Ambient1 62 Units ℃/W Package Marking and Ordering Information Part NO. Marking Package KSM5305 KSM5305 TO-20 Electrical Characteristics TC=25℃ Symbol Parameter unless otherwise noted Conditions Min Typ Max Units Off Characteristics BVDSS Drain-Sourtce Breakdown Voltage VDS=0V,ID=250μA -55 — — IDSS Zero Gate Voltage Drain Current VDS=0V, VDS=32V — — -25 IGSS Gate-Source Leakage Current VDS=±20V, VDS=0A — — ±100 v μA nA VDS=VDS, ID=250μA -2.0 — -4.0 V VDS=10V,ID=6A — — 0.06 VDS=2.5V,ID=5A — — — VDS=5V,ID=12A 8.0 — — — 1200 — — 520 — — 250 — — 14 — — 66 — — 39 — On Characteristics VGS(th) GATE-Source Threshold Voltage RDS(ON) Drain-Source On Resistance² GFS Forward Transconductance Ω --S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS=15V,VGS=0V, f=1MHz pF Switching Characteristics td(off) Turn-Off Delay Time tf Fall Time — 63 — Qg Total Gate Charge — — 63 Qgs Gate-SourceCharge VGS=4.5V, VDS=20V, — — 13 Qgd Gate-Drain “Miller” Charge ID=6A — — 29 ns ns ns ns nC nC nC — — -1.3 V — 71 110 ns — 170 250 nC td(on) Turn-On Delay Time tr Rise Time VDS=20V, VGS=10V,RGEN=3.3Ω Drain-Source Diode Characteristics VSD Source-Drain Diode ForwardVoltage² trr Reverse Recovery Time Qrr Reverse Recovery Charge VGS=0V,IS =1A IF=7A,di/dt=100A/μ S www.kersemi.com 2 KSM5305 KERSMI ELECTRONIC CO.,LTD. -55V P-channel MOSEETS Notes: 1. The data tested by surface mounted on a 1 inch²FR-4 board 2OZ copper. 2. The data tested by pulse width≤300us,duty cycle≤2% 3. The EAS data shows Max.rating.The test condition is VDD=25v,VGS=10V,L=0.1mH,iAS=17.8A 4. The power dissipation is limited by 150℃ junction temperature. Typical Characteristics TJ=25℃ Fig 1. Typical Output Characteristics Fig 3. Typical Transfer Characteristics unless otherwise noted Fig 2. Typical Output Characteristics Fig 4. Typical Forward Transconductance vs. Drain Current www.kersemi.com 3 KSM5305 KERSMI ELECTRONIC CO.,LTD. -55V P-channel MOSEETS Fig 5. Typical Capacitance vs. Drain-to-Source Voltage Fig 7. Typical Source-Drain Diode Forward Voltage Fig 6. Typical Gate Charge vs. Drain-to-Source Voltage Fig 8. Maximum Safe Operating Area Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.kersemi.com 4