DBZ 012058 www.vishay.com Vishay Draloric RF Power Feed-Through Capacitors with Screw Terminals, Class 1 Ceramic FEATURES • Small size • Geometry minimizes inductance APPLICATIONS Filtering purposes in industrial and medical RF power equipment. CAPACITANCE RANGE 200 pF CAPACITANCE TOLERANCE - 10 % + 20 % QUICK REFERENCE DATA CERAMIC DIELECTRICS DESCRIPTION VALUE Ceramic Class 1 Ceramic Dielectric Type R85 DBZ 012058 R85 (TCC - 750 ppm/K) RATED VOLTAGE 7.5 kVp Voltage (Vp) 7500 Min. Capacitance (pF) 200 DIELECTRIC STRENGTH TEST Max. Capacitance (pF) 200 12.5 kVDC, 1 minute Mounting Screw terminal MATERIAL Capacitor elements made from class 1 ceramic dielectric with noble metal electrodes. DISSIPATION FACTOR Max. 0.05 % (1 MHz) INSULATION RESISTANCE Connection terminals: thread terminal, copper / brass, silver plated Min. 100 000 M (at 25 °C) Allowable torque: 3.5 Nm (13 lbf in) OPERATING TEMPERATURE RANGE FINISH -55 °C to +100 °C Capacitor body completely protective lacquered. MARKING Type designator, capacitance value and tolerance, rated peak voltage, ceramic material code, production date code, manufacturer logo Revision: 02-Sep-15 Document Number: 22101 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DBZ 012058 www.vishay.com Vishay Draloric SAP PART NUMBER AND ELECTRICAL DATA PART NUMBER CERAMIC CAP. VALUES (pF) RATED VOLTAGE (kVP) RATED POWER (1) (kvar) RATED CURRENT (ARMS) FEED-THROUGH CURRENT (2) (A) R85 200 7.5 5.0 4.0 7.0 DBZ12058VZ20172BJ1 Notes (1) The surface temperature during operation must not exceed +100 °C (2) DC or low frequency RMS current (< 20 kHz) 20 ± 1 (0.79 ± 0.04) 28.0 + 0.5 (1.102 + 0.020) Ø 3.3 + 0.2 (0.130 + 0.008 Dia.) Ø 14 (0.55 Dia.) Ø 12 (0.47 Dia.) 0.5 (0.020) 22.0 ± 0.2 (0.866 ± 0.008) DIMENSIONS in millimeters (inches) = = 58 + 2 (2.28 + 0.08) M4 threads both ends 62 max. (2.44 max.) DERATING DIAGRAM 0.14 MHz Ug (kVp) 10 Ig (ARMS) Qg (kvar) 10 2.54 MHz Ug Qg 1 1 Ig 0.1 0.01 0.1 0.1 1 10 100 Frequency (MHz) RELATED DOCUMENTS General Information Revision: 02-Sep-15 www.vishay.com/doc?22071 Document Number: 22101 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000