DBF 050166 HQ www.vishay.com Vishay Draloric RF Power Feed-Through Capacitors with Conductor Rod, Class 1, R16 HQ Ceramic Dielectric FEATURES • High voltage ratings • High feed-through currents • The insulation rim made of silicone rubber minimize the adverse effects of moisture, dust and other impurity in the working environment. APPLICATIONS These capacitors feature a Q-factor greater than 10 000 which makes it well suited in operating frequency range from 0.1 MHz up to 30 MHz where high voltages and currents are present. CAPACITANCE RANGE 125 pF QUICK REFERENCE DATA CAPACITANCE TOLERANCE DESCRIPTION VALUE Ceramic Class 1 Ceramic Dielectric Type Voltage (Vp) ± 10 % R16 HQ CERAMIC DIELECTRICS DB 050166 R16 High Q (TCC + 100 ppm/K) 25 000 Min. Capacitance (pF) 125 RATED VOLTAGE Max. Capacitance (pF) 125 25 kVp Mounting Screw terminal DIELECTRIC STRENGTH TEST MATERIAL 200 % of rated AC voltage (50 Hz, 5 minutes) Capacitor elements made from class 1 ceramic dielectric with noble metal electrodes. RF POWER TEST Connection terminals: made from copper / brass, silver plated 100 % of rated power, for 5 minutes in a test generator circuit FINISH DISSIPATION FACTOR Capacitor body completely protective lacquered. Max. 0.025 % (1 MHz) These capacitors features umbrella-shaped insulation rims made from silicone elastomer to minimize the adverse effects of moisture, dust and other impurities in the working environment and to improve the characteristics of the electrical field. MARKING INSULATION RESISTANCE Min. 100 000 M (at 25 °C) OPERATING TEMPERATURE RANGE -55 °C to +100 °C Type designator, capacitance value and tolerance, rated peak voltage, ceramic material code, production date code, manufacturer logo. Revision: 02-Sep-15 Document Number: 22107 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DBF 050166 HQ www.vishay.com Vishay Draloric SAP PART NUMBER AND ELECTRICAL DATA PART NUMBER DBF50166BQ125P36CB CERAMIC CAP. VALUES (pF) RATED VOLTAGE (kVP) RATED POWER (1) (kvar) RATED CURRENT (ARMS) FEED-THROUGH CURRENT (2) (A) R16 HQ 125 25.0 Max. 550.0 120.0 80.0 Notes (1) The surface temperature during operation must not exceed +100 °C (2) DC or low frequency RMS current (< 20 kHz) DIMENSIONS in millimeters (inches) Ø 50 (1.97 Dia.) 210 ± 5 (8.27 ± 0.20) 84 ± 2 (3.31 ± 0.08) 2 (0.08) 22 ± 2 (0.87 ± 0.08) 166 ± 3 (6.54 ± 0.12) 5/16-18 UNC Thread (Both ends) 22 ± 2 (0.87 ± 0.08) DBF50166BQ125P36CB Ø 110.0 ± 0.5 (4.331 ± 0.020 Dia.) Ø 130.0 ± 1.5 (5.118 ± 0.059 Dia.) Ø 96 (3.78 Dia.) 45° 45° Ø 6.3 + 0.3 (0.248 + 0.012 Dia.) Revision: 02-Sep-15 Document Number: 22107 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DBF 050166 HQ www.vishay.com Vishay Draloric MOUNTING GUIDELINES • The connection to one electrode must be flexible in order to prevent the generation of physical force which could damage the capacitor elements. Such forces are often generated by the dimensional differences resulting from the normal physical tolerances of these components. • The capacitor elements must not be used as a mechanical support for other devices or components. • Use two wrenches when tightening the nuts on both sides of the conductor rod. The outer electrode terminal flange of these feed-through capacitors components should be fixed after tightening the inner electrode’s connection. • Make sure that not too much force applied to the solder connections between hardware and noble metal electrode. A torque less than 5 Nm is recommended. DERATING DIAGRAM DBF50166BQ125P36CB 2.24 MHz Ug (kVp) 1000 Ig (ARMS) Qg (kvar) 1000 33.3 MHz 100 Qg 100 10 Ug 10 1 Ig 1 0.1 0.1 1 10 100 0.1 1000 Frequency (MHz) RELATED DOCUMENTS General Information Revision: 02-Sep-15 www.vishay.com/doc?22071 Document Number: 22107 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000