HSE, HSZ Series www.vishay.com Vishay Draloric Ceramic Singlelayer DC Disc Capacitors, 500 VDC General Purpose FEATURES • High capacitance in small sizes • Low losses • Wide range of different lead styles • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Bypassing • Resonant circuits • Coupling DESIGN QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 2 Ceramic Dielectric Voltage (VDC) Y5T, Y5U 500 The capacitors consist of a ceramic disc which is silver plated on both sides. Connection leads are made of tinned copper having diameters of 0.6 mm. The capacitors may be supplied with straight or kinked leads having a lead spacing of 5.0 mm or 7.5 mm. Coating is made of blue colored flame retardant epoxy resin in accordance with UL 94 V-0. Min. Capacitance (pF) 10 Max. Capacitance (pF) 10 000 CAPACITANCE RANGE Mounting Radial 10 pF to 10 nF MARKING RATED VOLTAGE Marking indicates, capacitance, tolerance code, and rated voltage. 500 VDC DIELECTRIC STRENGTH OPERATING TEMPERATURE RANGE 1250 VDC, 2 s Component test -40 °C to +85 °C INSULATION RESISTANCE AT 500 VDC TEMPERATURE CHARACTERISTICS 5000 M (60 s) Y5T, Y5U TOLERANCE ON CAPACITANCE SECTIONAL SPECIFICATIONS ± 10 %, ± 20 %, - 20 % / + 50 % Climatic category (according to EN 60068-1): 40/085/21 DISSIPATION FACTOR C < 100 pF: max. 3.0 % (1 MHz) C 100 pF: max. 3.0 % (1 kHz) Revision: 19-Sep-14 Document Number: 22112 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HSE, HSZ Series www.vishay.com Vishay Draloric DIMENSIONS in millimeters Smax. 3.0 max. Dmax. V F 30 - 3 or 10 ± 1 Ø d ± 0.05 ORDERING INFORMATION CAPACITANCE (pF) TOLERANCE (%) BODY DIAMETER Dmax. (mm) BODY THICKNESS Smax. (mm) LEAD SPACING (1) F (mm) ± 1 mm LEAD DIAMETER (1) d (mm) ± 0.05 mm WIDTH (1) V (mm) ± 0.5 mm ORDERING CODE MISSING DIGITS SEE ORDERING CODE BELOW Y5T (2D3) 10 1.6 12 HSZ100#AQ###KR HSZ120#AQ###KR 15 1.5 HSZ150#AQ###KR 18 1.3 HSZ180#AQ###KR 22 1.1 HSZ220#AQ###KR 27 1.3 HSZ270#AQ###KR 33 1.4 39 47 1.2 56 68 1.4 100 1.1 5.0 150 180 ± 10, ± 20 3.0 0.6 270 1.6 1.3 330 390 1.2 560 1.1 1200 2700 3300 3900 4700 Revision: 19-Sep-14 HSZ121#AQ###KR HSZ151#AQ###KR HSZ181#AQ###KR HSZ221#AQ###KR HSZ271#AQ###KR HSZ331#AQ###KR HSZ471#AQ###KR HSZ561#AQ###KR 8.0 HSZ821#AQ###KR HSZ102#AQ###KR 1.2 HSZ122#AQ###KR 1.1 HSZ152#AQ###KR 1800 2200 HSZ820#AQ###KR HSZ681#AQ###KR 7.0 1000 1500 HSZ560#AQ###KR HSZ391#AQ###KR 470 820 HSZ470#AQ###KR HSZ101#AQ###KR 120 680 HSZ390#AQ###KR HSZ680#AQ###KR 6.0 82 220 HSZ330#AQ###KR HSZ182#AQ###KR 9.0 11.0 15.0 HSZ222#AQ###KR 1.2 HSZ272#AQ###KR HSZ332#AQ###KR 7.5 HSZ392#AQ###KR 1.1 HSZ472#AQ###KR Document Number: 22112 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HSE, HSZ Series www.vishay.com Vishay Draloric ORDERING INFORMATION CAPACITANCE (pF) TOLERANCE (%) BODY DIAMETER Dmax. (mm) BODY THICKNESS Smax. (mm) LEAD DIAMETER (1) d (mm) ± 0.05 mm LEAD SPACING (1) F (mm) ± 1 mm WIDTH (1) V (mm) ± 0.5 mm ORDERING CODE MISSING DIGITS SEE ORDERING CODE BELOW Y5U (2E3) 470 680 6.0 1000 5.0 1500 7.0 2200 4.0 6800 13.0 8200 HSE102#AQ###KR HSE152#AQ###KR HSE222#AQ###KR HSE332#AQ###KR 1.1 HSE472#AQ###KR 1.4 HSE822#AQ###KR 1.2 HSE103#AQ###KR 7.5 HSE682#AQ###KR 15.0 10 000 HSE681#AQ###KR 1.4 0.6 11.0 4700 HSE471#AQ###KR 1.2 1.2 - 20 / + 50 (2) 3300 1.1 Notes (1) Standard lead configuration, other lead spacing and diameter available on request (2) ± 20 % available on request ORDERING CODE # 7th digit ### 10th Example to 12th digit Capacitance tolerance ± 10 % = K, ± 20 % = M, - 20 % / + 50 % = S Lead configuration see “General Information” HSE 103 S AQ CRY K R Series Capacitance value Tolerance code Voltage code Lead configuration Internal code RoHS compliant MARKING 2n2 M E HSE 470 pF to 4.7 nF 6n8 M n22 K D HSE 6.8 nF to 10 nF HSZ 10 pF to 3.9 nF 4n7 K HSZ 4.7 nF RELATED DOCUMENTS General Information Revision: 19-Sep-14 www.vishay.com/doc?22001 Document Number: 22112 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000