DB 055135 HQ, DBZ 055135 HQ Datasheet

DB 055135 HQ, DBZ 055135 HQ
www.vishay.com
Vishay Draloric
RF Power Feed-Through Capacitors
with Conductor Rod, Class 1, R16 HQ Ceramic Dielectric
FEATURES
• High voltage ratings
• High feed-through currents
• Two different versions of the outer electrode terminal
APPLICATIONS
These capacitors feature a Q-factor greater than 10 000
which makes it well suited in operating frequency range
from 0.1 MHz up to 30 MHz where high voltages and
currents are present.
CAPACITANCE RANGE
100 pF
CAPACITANCE TOLERANCE
QUICK REFERENCE DATA
± 10 %
DESCRIPTION
VALUE
Ceramic Class
1
Ceramic Dielectric
Type
DB 055135
Voltage (Vp)
R16 High Q (TCC + 100 ppm/K)
DBZ 055135
20 000
Min. Capacitance (pF)
100
Max. Capacitance (pF)
100
Mounting
CERAMIC DIELECTRICS
R16 HQ
Screw terminal
MATERIAL
Capacitor elements made from class 1 ceramic dielectric
with noble metal electrodes.
Connection terminals:
made from copper / brass, silver plated
RATED VOLTAGE
20 kVp
DIELECTRIC STRENGTH TEST
200 % of rated AC voltage (50 Hz, 5 minutes)
RF POWER TEST
114 % of rated power, for 5 minutes in a test generator
circuit
DISSIPATION FACTOR
FINISH
Max. 0.025 % (1 MHz)
Capacitor body completely protective lacquered.
The contoured insulating rims are additionally glazed.
INSULATION RESISTANCE
MARKING
Type designator, capacitance value and tolerance, rated
peak voltage, ceramic material code, production date code,
manufacturer logo
Min. 100 000 M (at 25 °C)
OPERATING TEMPERATURE RANGE
-55 °C to +100 °C
ACCESSORIES ADDED
All feed-through capacitors are supplied with the necessary
nuts and washers to make the connection to the conductor
rod.
Revision: 02-Sep-15
Document Number: 22148
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DB 055135 HQ, DBZ 055135 HQ
www.vishay.com
Vishay Draloric
SAP PART NUMBER AND ELECTRICAL DATA
PART NUMBER
CERAMIC
CAP.
VALUES
(pF)
RATED
VOLTAGE
(kVP)
RATED
POWER (1)
(kvar)
RATED
CURRENT
(ARMS)
FEED-THROUGH
CURRENT (2)
(A)
R16 HQ
100
20.0
Max. 900.0
150.0
80.0
R16 HQ
100
20.0
Max. 900.0
150.0
80.0
TYPE DB 055135
DB055135WP10136CB1
TYPE DBZ 055135
DBZ55135WP10136CB1
Notes
(1) The surface temperature during operation must not exceed +100 °C
(2) DC or low frequency RMS current (< 20 kHz)
DIMENSIONS in millimeters (inches)
DB 055135
Ø 82
(3.23 Dia.)
Ø 75
(2.95 Dia.)
4±1
(0.16 ± 0.04)
25 ± 1
(0.98 ± 0.04)
+ 0.08
- 0.04)
+2
-1
150
65 ± 2
(2.56 ± 0.08)
2 (0.08)
(5.91
Ø 55
(2.17 Dia.)
173 ± 2
(6.88 ± 0.08)
1
(0.04)
135 ± 2
(5.31 ± 0.08)
M10 Thread (both ends)
62 ± 2
(2.44 ± 0.08)
135 ± 2
(5.31 ± 0.08)
DBZ 055135
SW 17 (0.67 HEX)
SW 17
(0.67 HEX)
M10 Thread
(both ends)
25 ± 1
(0.98 ± 0.04)
60°
Revision: 02-Sep-15
165.0 ± 1.5
(6.496 ± 0.059)
135.0 ± 1.5
(5.315 ± 0.059)
60°
Ø 100.0 ± 0.5
(3.937 ± 0.020 Dia.)
Ø 86.0 ± 0.5
(3.386 ± 0.020 Dia.)
Ø 9.5 + 0.3
(0.374 + 0.012 Dia.)
Ø 5.5 + 0.2
(0.217 + 0.008 Dia.)
Document Number: 22148
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DB 055135 HQ, DBZ 055135 HQ
www.vishay.com
Vishay Draloric
MOUNTING GUIDELINES
• The connection to one electrode must be flexible in order to prevent the generation of physical force which could damage the
capacitor elements. Such forces are often generated by the dimensional differences resulting from the normal physical
tolerances of these components.
• The capacitor elements must not be used as a mechanical support for other devices or components.
• Use two wrenches when tightening the nuts on both sides of the conductor rod.
The outer electrode terminal flange of these feed-through capacitors components should be fixed after tightening the inner
electrode’s connection.
• Make sure that not too much force applied to the solder connections between hardware and noble metal electrode. A torque
less than 5 Nm is recommended.
DERATING DIAGRAM
DB055135WP10136CB1, DBZ55135WP10136CB1
7.16 MHz
Ug (kVp)
100
Ig (ARMS)
Qg (kvar)
1000
39.8 MHz
Ug
10
100
Qg
1
10
Ig
0.1
1
10
100
1
1000
Frequency (MHz)
RELATED DOCUMENTS
General Information
Revision: 02-Sep-15
www.vishay.com/doc?22071
Document Number: 22148
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000