FPE 200, FPE 210 www.vishay.com Vishay Draloric RF Power Plate Capacitors for Higher Voltages Class 1 Ceramic FEATURES • Low losses • High reliability • High voltage ratings APPLICATIONS These high technology are designed for usage in high frequency heating and welding equipment where high voltage ratings are required. CAPACITANCE RANGE 1000 pF to 1500 pF CAPACITANCE TOLERANCE QUICK REFERENCE DATA DESCRIPTION VALUE Ceramic Class 1 Ceramic Dielectric Type ± 20 %, ± 10 % CERAMIC DIELECTRIC R85 FPE 200 Voltage (Vp) FPE 210 30 000 Min. Capacitance (pF) 1000 1500 Max. Capacitance (pF) 1000 1500 Mounting Screw terminal MATERIAL Capacitor elements made from class 1 ceramic dielectric with noble metal electrodes. Flexible connection terminals copper / brass, silver plated, to allow for series and parallel interconnection. MARKING Type designator, capacitance value and tolerance, rated RF voltage (peak value), ceramic material code, production date code, manufacturer logo. R85 (TCC - 750 ppm/K) RATED VOLTAGE 30 kVp (= RF peak voltage + DC voltage) DIELECTRIC STRENGTH TEST 50 000 VDC, 5 minutes 30 000 VAC, 50 Hz, 5 minutes DISSIPATION FACTOR Max. 0.05 % Measuring frequencies: 300 kHz or 100 kHz INSULATION RESISTANCE Min. 10 000 M (at 25 °C) FINISH OPERATING TEMPERATURE RANGE Noble metal electrodes and terminals protective lacquered. The contoured insulating rim is additionally glazed. -55 °C to +100 °C Revision: 11-Sep-15 Document Number: 22128 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FPE 200, FPE 210 www.vishay.com Vishay Draloric SAP PART NUMBER AND ELECTRICAL DATA PART NUMBER CAP. VALUE (pF) CERAMIC FPE200WV102##BJ1 1000 R85 FPE210WV152##BJ1 RATED VOLTAGE (1) (kVp) RATED POWER (2) (kvar) 30 1500 RATED CURRENT (ARMS) 160 60 90 90 Notes • ## 14th to 15th digit: capacitance tolerance code ± 20 % = 38, ± 10 % = 36 (1) Rated voltage = RF peak value + DC voltage when min. 80 % U DC (2) The surface temperature during operation must not exceed +100 °C DIMENSIONS in millimeters (inches) FPE 200: 73 ± 2 (2.87 ± 0.08) FPE 210: 56 ± 1 (2.21 ± 0.04) Ø 28 (1.10 Dia.) Ø 210 max. 8.27 Dia. max. 32.5 (1.28) M10 thread DERATING DIAGRAMS FPE200WV102##BJ1 Ug (kVp) 100 0.06 MHz FPE210WV152##BJ1 Ig (ARMS) Qg (kvar) 1000 3.58 MHz Ug (kVp) 100 0.02 MHz 9.54 MHz Ig (ARMS) Qg (kvar) 1000 Ug Ug 10 100 10 100 Qg 1 Qg Ig 0.1 0.001 10 1 10 Ig 0.01 0.1 1 10 Frequency (MHz) 100 1 1000 0.1 0.001 0.01 0.1 1 Frequency (MHz) 10 1 100 RELATED DOCUMENTS General Information Revision: 11-Sep-15 www.vishay.com/doc?22071 Document Number: 22128 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000