QUAD FLAT PACKAGE FUJITSU SEMICONDUCTOR DATA SHEET 100 PIN PLASTIC FPT-100P-M22 100-pin plastic QFP Lead pitch 0.65 mm Package width × package length 14.00 mm × 20.00 mm Lead shape Gullwing Sealing method Plastic mold Mounting height 3.35 mm MAX Code (Reference) P-QFP100-14×20-0.65 (FPT-100P-M22) 100-pin plastic QFP (FPT-100P-M22) Note 1) * : These dimensions do not include resin protrusion. Note 2) Pins width and pins thickness include plating thickness. Note 3) Pins width do not include tie bar cutting remainder. 23.90±0.40(.941±.016) * 20.00±0.20(.787±.008) 80 51 50 81 0.10(.004) 17.90±0.40 (.705±.016) *14.00±0.20 (.551±.008) INDEX Details of "A" part 1 30 0.65(.026) "A" C 0.25(.010) +0.35 3.00 –0.20 +.014 .118 –.008 (Mounting height) 0~8˚ 31 100 2006 FUJITSU LIMITED F100033S-c-1-1 0.32±0.05 (.013±.002) 0.13(.005) M 0.17±0.06 (.007±.002) 0.80±0.20 (.031±.008) 0.88±0.15 (.035±.006) 0.25±0.20 (.010±.008) (Stand off) Dimensions in mm (inches). Note: The values in parentheses are reference values. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of the information or package dimensions in this document. 0607