P/N XX-666000-00 SOIC-to-SOWIC Adapter FEATURES • Allows the use of a narrow package IC in place of a wide one. GENERAL SPECIFICATIONS • LEADS: mechanically fastened and soldered to adapter’s PCB subtrate • PCB: FR-4, 0.062 [1.56] or 0.094 [2.39] thick manufactured to IPC 600E Class 2 standards • MALE PIN: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M • MALE PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 per ASTM B579-73 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290 • OPERATING TEMPERATURE: 221°F [105°C] MOUNTING CONSIDERATIONS • Standard SMT mounting to PCB • SMT Package can be IR reflowed, vapor phased, or simply hand soldered ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED PADS ARE 0.076 [1.93] x 0.024 [0.61] “A” DIMENSION = 1/2 x TOTAL PIN COUNT x 0.050 [1.27] + 0.030 [0.76] CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ORDERING INFORMATION XX-666000-00 No. of Conductors 8-24 Series Surface Mount ALL CAC’s ARE MANUFACTURED AND INSPECTED TO IPC- 610B CLASS 2 GUIDELINES CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18044 Rev. AA