P/N 1111903 24-Pin SOWIC-to-22-Pin 0.400" CRT DIP Adapter for 75ALS162 and Others FEATURES •A cost-effective means of upgrading to SOIC without changing your PCB layout. GENERAL SPECIFICATIONS •BOARD MATERIAL: 0.062 thick FR-4 with 1-oz. Cu traces, both sides. RoHS Compliant Board FR406 or IS410 per IPC 4101A/46 •PINS: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M •PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 per ASTM B579-73 over 100µ [2.54µ] Ni per SAE-AMS-QQ-N-290. The RoHS version pin is 10µ [0.25] min. Au per MIL-G-45204 over over 100µ [2.54µ] Ni per SAE-AMS-QQ-N-290 •OPERATING TEMPERATURE: 221ºF [105ºC] MOUNTING CONSIDERATIONS •SUGGESTED PCB HOLE SIZE: 0.028 ±0.003 [0.71 ±0.08] dia. Pin Nos. CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. SOIC DIP 1 1 2 2 3 3 4 4 5 5 6 6 7 7 ALL DIMENSIONS: INCHES [MILLIMETERS] 8 8 ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED 9 9 10 10 11 NC 12 11 13 12 14 NC 15 13 16 14 17 15 18 16 19 17 20 18 21 19 22 20 23 21 24 22 ORDERING INFORMATION 1111903 1111903-RC = RoHS Complaint Version Pinout List SOIC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 DIP 1 2 3 4 5 6 7 8 9 10 NC 12 13 NC 15 16 17 18 19 20 21 22 23 24 Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18071 Rev. AA