Replaces MAX691 with MAX807 FEATURES • Correct-A-Chip™ technology solves problems associated with the use of alternate ICs (due to availability, obsolescence, need for better performance, etc.) by eliminating the need for new PCB’s. GENERAL SPECIFICATIONS • FEMALE SOCKET MATERIAL: black UL 94V-0 glass-filled 4/6 Nylon 170°C continuous use temp. • PCB: FR-4, 0.062 [1.56] or 0.094 [2.39] thick • MALE PIN: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M • MALE PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 per ASTM B579-73 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290 CUSTOMIZATION: In addition to the standard products shown • FEMALE PIN BODY: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M on this page, Aries specializes in custom design and production. • FEMALE PIN BODY PLATING: 10µ [0.254µ] Au per MIL-G-45204 over 100µ Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the [2.54µ] Ni per SAE AMS-QQN- 290 right to change product general specifications without notice. • 4-FINGER COLLET CONTACT: BeCu per UNS C17200, ASTM B194-08 • CONTACT PLATING: 10µ [0.254µ] Au per MIL-G-45204 over 50µ [1.27µ] Ni per SAE AMS-QQ-N-290 • MINIMUM CONTACT CURRENT RATING: 1 amp @ 5VDC ORDERING INFORMATION • OPERATING TEMPERATURE: 221°F [105°C] 16-304235-10 • INSERTION FORCE: 180g/pin, based on a 0.018 [0.46] dia. test lead 16-304235-10-P for Panelized Version • WITHDRAWAL FORCE: 90g/pin, based on a 0.018 [0.46] dia. test lead • NORMAL FORCE: 140g/pin, based on a 0.018 [0.46] dia. test lead • SOCKET ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] in dia., 0.100- 0.125 2.54-3.18] long MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.028 ±0.002 [0.71 ±0.05] dia. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS MAX807 (socket) MAX691 (male contacts) 1 9 3 3 4 11 5 4 6 14 9 15 10 14 11 12 12 13 14 1 16 2 All Others N/C Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18075 Rev. AA