Replaces MAX691 with MAX807 FEATURES •Correct-A-Chip™ technology solves problems associated with the use of alternate ICs (due to availability, obsolescence, need for better performance, etc.) by eliminating the need for new PCB’s. GENERAL SPECIFICATIONS •FEMALE SOCKET MATERIAL: black UL 94V-0 glass-filled 4/6 Nylon 170°C continuous use temp. •PCB: FR-4, 0.062 [1.56] or 0.094 [2.39] thick •MALE PIN: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M •MALE PIN PLATING: 200µ [5.08µ] Sn/Pb 93/7 per ASTM B579-73 over 100µ [2.54µ] Ni per SAE AMS-QQ-N-290 CUSTOMIZATION: In addition to the standard products shown •FEMALE PIN BODY: Brass 360 1/2-hard per UNS C36000, ASTM B16/B16M on this page, Aries specializes in custom design and production. •FEMALE PIN BODY PLATING: 10µ [0.254µ] Au per MIL-G-45204 over 100µ Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the [2.54µ] Ni per SAE AMS-QQN- 290 right to change product general specifications without notice. •4-FINGER COLLET CONTACT: BeCu per UNS C17200, ASTM B194-08 •CONTACT PLATING: 10µ [0.254µ] Au per MIL-G-45204 over 50µ [1.27µ] Ni per SAE AMS-QQ-N-290 •MINIMUM CONTACT CURRENT RATING: 1 amp @ 5VDC ORDERING INFORMATION •OPERATING TEMPERATURE: 221°F [105°C] 16-304235-10 •INSERTION FORCE: 180g/pin, based on a 0.018 [0.46] dia. test lead 16-304235-10-P for Panelized Version •WITHDRAWAL FORCE: 90g/pin, based on a 0.018 [0.46] dia. test lead •NORMAL FORCE: 140g/pin, based on a 0.018 [0.46] dia. test lead •SOCKET ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] in dia., 0.100- 0.125 2.54-3.18] long MOUNTING CONSIDERATIONS •SUGGESTED PCB HOLE SIZE: 0.028 ±0.002 [0.71 ±0.05] dia. ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS MAX807 (socket) MAX691 (male contacts) 1 9 3 3 4 11 5 4 6 14 9 15 10 14 11 12 12 13 14 1 16 2 All Others N/C Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 18075 Rev. AA