Series 513 Lo-PRO file Socket w/Collet Contacts & Solder Pin Tails ® FEATURES • Available with Solder Pin Tails • Choose from Several Sizes and Plating Options • For Wire Wrap Pins, see Data Sheet 12012 GENERAL SPECIFICATIONS • BODY MATERIAL: Black UL 94V-0 glass-filled 4/6 Nylon • SHELL MATERIAL: Brass 360 1/2-hard per UNS C36000 ASTM B16/B16M-05 • SHELL PLATING: 10µ [0.25µ] min. Au per MIL-G-45204 or 200µ [5.08µ] min. 93/7 Sn/Pb per ASTM B545 –OR– 200µ [5.08µ] min. Sn per ASTM B545 Type 1 over 100µ [2.54µ] min. Ni per SAE AMS-QQN-290B ORDERING INFORMATION • 4-FINGER COLLET MATERIAL: BeCu per UNS C17200 ASTM B194-08 XX-X 513-XXXX • COLLET CONTACT PLATING: 200µ [5.08µ] min. 93/7 Sn/Pb per ASTM B545 –OR– 200µ [5.08µ] min. Sn per ASTM B545 Type 1 –OR– 10µ [0.25µ] Au per MIL-G-45204 Collet/Shell Plating Options over 50µ [1.27µ] min. [1.27µ] Ni per SAE AMS-QQ-N-290 heavy 30µ [0.76µ] 10=Au Collet/Sn Shell • CONTACT CURRENT RATING: 3 amps 10H=30µ" Au Collet/Sn Shell 10T=Sn Collet/Sn Shell • INSERTION FORCE: 180g/pin, based on 0.018 [0.46] dia. test lead 10TL=Sn/Pb Collet and Shell • WITHDRAWAL FORCE: 90g/pin, based on 0.018 [0.46] dia. test lead 11=Au Collet/Au Shell • NORMAL FORCE: 140g/pin, based on 0.018 [0.46] dia. test lead 11H=30µ" Au Collet/AuShell • OPERATING TEMPERATURE: 221°F [105°C] Sn & Sn/Pb plating; 257°F [125°C] Au Series plating Row-to-Row Spacing (Dim. “Y”) • ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] dia., 0.100-0.146 [2.54-3.71] long MOUNTING CONSIDERATIONS • SUGGESTED PCB HOLE SIZE: 0.030 ±0.002 [0.76 ±0.05] dia. 2 =0.200 [5.08] 3 =0.300 [7.62] 4 =0.400 [10.16] 6 =0.600 [15.24] 9 =0.900 [22.86] No. of Pins (See Table) Centers “Y” ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED FOR COLLET SOCKETS WITH WIRE WRAP PINS, SEE DATA SHEETS 12012 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Dim. “Z” Body Style Available Sizes 0.200 [5.08] 0.300 [7.62] A 2 thru 10 0.300 [7.62] 0.400 [10.16] C, B 2 thru 20, 22 thru 40 0.400 [10.16] 0.500 [12.70] C 2 thru 22 0.600 [15.24] 0.700 [17.78] C, B 2 thru 40, 42 thru 48 0.900 [22.86] 1.000 [25.40] B 2 thru 64 CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 12011 Rev. 8.3 1 of 1