Series 518 Open Frame Socket w/Collet Contacts & Surface Mount Pins FEATURES • Open Frame allows for more efficient utilization of Board Space and Better Cooling • Compatible with Automatic Insertion Equipment • Side-to-side and End-to-end Stackable GENERAL SPECIFICATIONS • BODY MATERIAL: Black UL 94V-0 Glass-filled 4/6 Nylon • PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM B16/B16M-05 • PIN BODY PLATING: 200µ [5.08µ] min. 93/7 Sn/Pb per ASTM B545 –OR– 200µ [5.08µ] min. Sn per ASTM B545 Type 1 over 100µ [2.54µ] min. Ni per SAE AMS-QQN-290B • 4-FINGER COLLET CONTACT: BeCu per UNS C17200 ASTM B194-08 • CONTACT PLATING: 10µ [0.25µ] Au per MIL-G-45204 over 50µ min. [1.27µ] Ni per SAE AMS-QQ-N-290B • CONTACT CURRENT RATING: 3 amps • OPERATING TEMPERATURE: -67°F to 221°F [-55°C to 105°C] • INSERTION FORCE: 180g/pin, based on 0.018 [0.46] dia. test lead • WITHDRAWAL FORCE: 90g/pin, based on 0.018 [0.46] dia. test lead • NORMAL FORCE: 140g/pin, based on 0.018 [0.46] dia. test lead • ACCEPTS LEADS: 0.015-0.025 [0.38-0.64] dia., 0.100-0.125 [2.54-3.18] long ORDERING INFORMATION XX-X 518 X XXX MOUNTING CONSIDERATIONS Termination 0 = Surface Mount Series Row-to-Row Spacing, “Y” Dim. 3= 0.300 [7.62] 4= 0.400 [10.16] 6= 0.600 [15.24] No. of Pins (See Table) • SUGGESTED PCB HOLE SIZE: 0.045 ±0.002 [1.14 ±0.05] dia. Frame Style No. of Ribs Centers “Y” A 1 0.300 [7.62] 0.300 [7.62] B 2 0.400 [10.16] 0.300 [7.62] C 3 0.400 [10.16] 0.600 [15.24] ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED OPEN FRAME COLLET SOCKET w/WIRE WRAP, SEE DATA SHEET 12016 OPEN FRAME COLLET SOCKET w/SOLDER PIN TAILS, SEE DATA SHEET 12017 OPEN FRAME COLLET CAPACITOR SOCKET w/SOLDER PIN, SEE DATA SHEET 12026 OPEN FRAME COLLET CAPACITOR SOCKET w/WIRE WRAP, SEE DATA SHEET 12027 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Plating 0= Au Collet, Sn Shell 0TL= Au Collet, Sn/Pb Shell 1= Au Collet & Shell Dim. “Z” No. of Pins 0.400 [10.16] 6 0.400 [10.16] 8, 14, 16, 18, 20 0.500 [12.70] 20, 22 0.400 [10.16] 24, 28 0.500 [12.70] 24 0.700 [17.78] 24, 28, 32 CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION. SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE FURNISHED, DEPENDING ON QUANTITY. ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS WITHOUT NOTICE PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE CONSIDERED UNCONTROLLED 2609 Bartram Road • Bristol, PA 19007-6810 USA TEL 215-781-9956 • FAX 215-781-9845 WWW.ARIESELEC.COM • [email protected] 12018 Rev. 6.1 1 of 1