HEU, HEE Series Datasheet

HEU, HEE Series
www.vishay.com
Vishay Draloric
Ceramic Singlelayer DC Disc Capacitors,
5 kVDC General Purpose
FEATURES
• High capacitance in small sizes
• Low losses
• Wide range of different lead styles
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• Lighting ballasts
• SMPS
DESIGN
The capacitors consist of a ceramic disc which is silver
plated on both sides. Connection leads are made of tinned
copper having diameters of 0.6 mm or 0.8 mm.
QUICK REFERENCE DATA
DESCRIPTION
Ceramic Class
VALUE
1
Ceramic Dielectric
2
Coating is made of blue colored flame retardant epoxy resin
in accordance with UL 94 V-0.
N750, Y5U
Voltage (VDC)
The capacitors may be supplied with straight or kinked
leads having a lead spacing of 12.5 mm.
5000
Min. Capacitance (pF)
22
220
CAPACITANCE RANGE
Max. Capacitance (pF)
330
2200
22 pF to 2.2 nF
Mounting
Radial
RATED VOLTAGE
MARKING
5 kVDC
Marking indicates, capacitance, tolerance code, and rated
voltage.
DIELECTRIC STRENGTH
7500 VDC, 2 s
Component test
OPERATING TEMPERATURE RANGE
-40 °C to +85 °C
INSULATION RESISTANCE AT 500 VDC
10 000 M (60 s)
TEMPERATURE CHARACTERISTICS
Class 1
N750 (U2J)
Class 2
Y5U
SECTIONAL SPECIFICATIONS
Climatic category (according to EN 60068-1):
40/085/21
TOLERANCE ON CAPACITANCE
± 10 %, ± 20 %
DISSIPATION FACTOR
Class 1:
100 pF
-4
C < 30 pF:  ------------------- + 0.7 x 10 max.  1 MHz 
 C

C  30 pF: max. 0.1 % (1 MHz)
Class 2:
Revision: 18-Sep-14
max. 2.5 % (1 kHz)
Document Number: 22155
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
HEU, HEE Series
www.vishay.com
Vishay Draloric
DIMENSIONS in millimeters
Smax.
3.0 max.
Dmax.
V
F
30 - 3
or 10 ± 1
Ø d ± 0.05
ORDERING INFORMATION
CAPACITANCE
(pF)
TOLERANCE
(%)
N750 (U2J)
22
33
47
68
82
100
150
220
330
Y5U (2E3)
220
330
680
1000
1500
2200
BODY
DIAMETER
Dmax. (mm)
BODY
THICKNESS
Smax. (mm)
LEAD
SPACING (1)
F (mm)
± 1 mm
LEAD
DIAMETER (1)
d (mm)
± 0.05 mm
WIDTH (1)
V (mm)
± 0.5 mm
0.6
2.2
0.8
1.9
HEU220KBE###KR
HEU330KBE###KR
HEU470KBE###KR
HEU680KBE###KR
HEU820KBE###KR
HEU101KBE###KR
HEU151KBE###KR
HEU221KBE###KR
HEU331KBE###KR
7.0
4.8
9.3
± 10
11.8
12.5
5.2
14.4
16.3
19.5
7.0
0.6
HEE221#BE###KR
HEE331#BE###KR
HEE681#BE###KR
HEE102#BE###KR
HEE152#BE###KR
HEE222#BE###KR
9.0
± 20 (2)
5.0
11.0
13.0
15.0
12.5
0.8
ORDERING CODE
MISSING DIGITS
SEE ORDERING
CODE BELOW
3.8
Notes
(1) Standard lead configuration, other lead spacing and diameter available on request
(2) ± 10 % available on request
ORDERING CODE
#
7th digit
Capacitance tolerance
± 10 % = K, ± 20 % = M
###
10th to 12th digit
Lead configuration
see “General Information”
Example
HEE
222
M
BE
EJ0
K
R
Series
Capacitance
value
Tolerance code
Voltage code
Lead
configuration
Internal code
RoHS
compliant
MARKING
n33 K
5 kV U
HEU 22 pF to 100 pF
HEE 220 pF to 1.0 nF
1n5 M
HEU 150 pF to 330 pF
HEE 1.5 nF to 2.2 nF
RELATED DOCUMENTS
General Information
Revision: 18-Sep-14
www.vishay.com/doc?22001
Document Number: 22155
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000