MKP 1846 Not for new designs Vishay Roederstein Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Dimensions in millimeters W Max. L Max. Marking Product is completely lead (Pb)-free Product is RoHS-compliant OPERATING TEMPERATURE RANGE H Max. - 55°C to + 100°C CAPACITANCE RANGE 6 1000pF to 0.68µF ± 0.4 6.0 - 1 CAPACITANCE TOLERANCES ± 20% (M), ± 10% (K), ± 5% (J) RATED VOLTAGES (UR): pcm ± 0.4 630 VDC, 1000 VDC, 1600 VDC, 2000 VDC Ød PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz W Ød < 16.0 0.8 16.0 1.0 400 VAC, 600 VAC, 650 VAC, 700 VAC TEST VOLTAGE (ELECTRODE/ELECTRODE) 1.6 x UR for 2 s MAIN APPLICATIONS INSULATION RESISTANCE High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction and fly-back tuning). Protection circuits in SMPS’s. Snubber and electronic ballast circuits. Input and output filtering in SPS designs, storage, timing and integrating circuits. Measured at 100 VDC after one minute For C 0.33µF: 100,000 M minimum value TIME CONSTANT MARKING Measured at 100 VDC after one minute For C > 0.33µF: 30,000 s minimum value Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture TEMPERATURE COEFFICIENT DIELECTRIC - 250 x 10-6/°C (typical value) CAPACITANCE DRIFT Polypropylene film Up to + 40°C, ± 0.5% for a period of two years ELECTRODES DERATING FOR DC AND AC.CATEGORY VOLTAGE UC Vacuum deposited aluminum At + 85°C: UC = 1.0 UR At + 100°C: UC = 0.7 UR COATING Flame retardant plastic case (UL-class 94 V-0), blue, epoxy resin sealed SELF INDUCTANCE ~ 6 nH measured with 2mm long leads CONSTRUCTION Extended double-sided metallized polyester film, internal series connection, single-sided metallized polypropylene film (refer to general information) PULL TEST ON LEADS 30 N in direction of leads according to IEC 60068-2-21 RELIABILITY LEADS Tinned wire IEC TEST CLASSIFICATION 55/100/56, according to IEC 60068 Operational life > 300,000 h Failure rate < 5 FIT (40°C and 0.5 x UR) For further details, please refer to the general information available at www.vishay.com/doc?26033. MAXIMUM PULSE RISE TIME PCM (mm) Maximum Pulse Rise Time dv/dt [V/µs] 630 VDC 1000 VDC 1600 VDC 15 3430 6600 11100 22.5 2120 2800 3800 27.5 1524 2000 2680 37.5 980 1280 1690 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. Document Number: 26020 Revision: 23-Jun-05 For technical questions contact; [email protected] 2000 VDC — 6200 4200 2600 www.vishay.com 1 MKP 1846 Vishay Roederstein Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor DISSIPATION FACTOR TAN MEASURED AT 1kHz C 0.1µF 0.3 x 10-3 0.1µF < C 1.0µF 0.3 x 10-3 10kHz 0.4 x 10-3 0.4 x 10-3 100kHz 1.5 x 10-3 — Maximum values CAPACITANCE VOLTAGE CODE 20 2000 VDC/700 VAC VOLTAGE CODE 13 1600 VDC/650 VAC VOLTAGE CODE 10 1000 VDC/600 VAC VOLTAGE CODE 63 630 VDC/400 VAC CAPACITANCE CODE W H L PCM W H L PCM W H L PCM W H L PCM 1000pF - 210 — — — — — — — — 5.5 10.5 18.0 15 6.5 14.5 26.5 22.5 1500pF - 215 — — — — — — — — 5.5 10.5 18.0 15 6.5 14.5 26.5 22.5 2200pF - 222 — — — — — — — — 5.5 10.5 18.0 15 6.5 14.5 26.5 22.5 3300pF - 233 — — — — 5.5 10.5 18.0 15 6.5 12.5 18.0 15 6.5 14.5 26.5 22.5 4700pF - 247 — — — — 5.5 10.5 18.0 15 7.5 13.5 18.0 15 6.5 14.5 26.5 22.5 6800pF - 268 5.5 10.5 18.0 15 6.5 12.5 18.0 15 8.5 14.5 18.0 15 7.5 15.5 26.5 22.5 0.01µF - 310 5.5 10.5 18.0 15 6.5 14.5 26.5 22.5 6.5 14.5 26.5 22.5 8.5 16.5 26.5 22.5 0.015µF - 315 6.5 12.5 18.0 15 6.5 14.5 26.5 22.5 7.5 15.5 26.5 22.5 10.5 18.5 26.5 22.5 0.022µF - 322 7.5 13.5 18.0 15 6.5 14.5 26.5 22.5 8.5 16.5 26.5 22.5 11.5 20.5 31.5 27.5 0.033µF - 333 8.5 14.5 18.0 15 7.5 15.5 26.5 22.5 10.5 18.5 26.5 22.5 13.5 23.5 31.5 27.5 0.047µF - 347 7.5 15.5 26.5 22.5 10.5 18.5 26.5 22.5 11.5 20.5 31.5 27.5 15.0 24.5 31.5 27.5 0.068µF - 368 8.5 16.5 26.5 22.5 11.0 21.0 26.5 22.5 11.5 20.5 31.5 27.5 16.5 29.5 31.5 27.5 0.1µF - 410 10.5 18.5 26.5 22.5 11.5 20.5 31.5 27.5 15.0 24.5 31.5 27.5 16.0 28.5 41.5 37.5 0.15µF - 415 11.5 20.5 31.5 27.5 13.5 23.5 31.5 27.5 14.5 24.5 41.5 37.5 — — — — 0.22µF - 422 13.5 23.5 31.5 27.5 16.5 29.5 31.5 27.5 16.0 28.5 41.5 37.5 — — — — 0.33µF - 433 15.0 24.5 31.5 27.5 — — — — — — — — — — — — 0.47µF - 447 14.5 24.5 41.5 37.5 — — — — — — — — — — — — 0.68µF - 468 18.0 32.5 41.5 37.5 — — — — — — — — — — — — Further C-values upon request. RECOMMENDED PACKAGING LETTER CODE TYPE OF PACKAGING HEIGHT (H) (mm) REEL DIAMETER (mm) ORDERING CODE EXAMPLES PCM 15 PCM 22.5 - 27.5 PCM 37.5 D AMMO 16.5 S* MKP 1846-310/635-D X — — G AMMO 18.5 S* MKP 1846-310/635-G X — — F REEL 16.5 350 MKP 1846-310/635-F X — — W REEL 18.5 350 MKP 1846-310/635-W X — — V REEL 18.5 500 MKP 1846-410/105-V X X — G AMMO 18.5 L* MKP 1846-410/105-G — X — — BULK — — MKP 1846-422-135 X X X *S = box size 55 x 210 x 340mm (W x H x L) *L = box size 60 x 360 x 510mm (W x H x L) www.vishay.com 2 For technical questions contact; [email protected] Document Number: 26020 Revision: 23-Jun-05 MKP 1846 Vishay Roederstein 1000 7 5 Capacitance in pF and µF VRMS VRMS Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor 1000 7 5 68 3 2 00 3 2 00 0. 01 5 0. 100 7 5 3 2 Capacitance in pF and ∝F 33 68 00 22 100 7 5 3 2 03 0. 47 0. 3 0. 06 8 33 0. 0. 15 3 5 7 10 4 2 3 5 7 10 5 2 3 5 7 10 6 f [Hz] 10 00 3 2 22 22 100 7 5 3 2 0. 1 0. 0 47 47 0. 3 00 02 2 2 3 5 7 10 5 5 7 10 5 01 2 3 5 7 10 6 f [Hz] 2 3 5 7 10 6 10 00 22 00 0. 1 0 . 100 7 5 3 2 0. Capacitance in pF and µF 5 7 10 4 3 1000 7 5 47 04 00 7 0.0 22 1600 VDC 3 2 Permissible AC Voltage versus Frequency 10 2 5 7 10 4 3 2 00 0. 2 f [Hz] VRMS VRMS 1000 7 5 10 3 01 7 0.0 2 1000 VDC Permissible AC Voltage versus Frequency 1600 VDC 0. 0. 2 10 103 10 2 1 04 630 VDC 103 0. 0. 01 Capacitance in pF and ∝F 10 10 3 2 3 5 7 104 2 3 5 7 10 5 2 3 5 7 10 6 f [Hz] Permissible AC Voltage versus Frequency Permissible AC Voltage versus Frequency Document Number: 26020 Revision: 23-Jun-05 For technical questions contact; [email protected] www.vishay.com 3 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000