MKT 1822 Vishay Roederstein Metallized Polyester Film Capacitor Related Document: IEC 60384-2 MAIN APPLICATIONS: Dimensions in millimeters L Max. Blocking, bypassing, filtering, timing, coupling and decoupling circuits, interference suppression in low voltage applications. W Max. Marking MARKING: Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture H Max. DIELECTRIC: Polyester film 0.6 ELECTRODES: Vacuum deposited aluminum COATING: PCM ± 0.4 Flame retardant plastic case (UL-class 94 V-0), green, epoxy resin sealed Flame class B according to IEC 60065 available on request 6-1 0.8 ± 0.4 TIME CONSTANT: CONSTRUCTION: Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute Extended metallized film (refer to general information) LEADS: For C > 0.33µF and UR > 100 VDC: Tinned wire 10,000 s minimum value (40,000 s typical value) IEC TEST CLASSIFICATION: 55/100/56, according to IEC 60068 For C > 0.33µF and UR ≤ 100 VDC: TEMPERATURE RANGE: 5000 s minimum value (15,000 s typical value) - 55°C to + 100°C CAPACITANCE DRIFT: CAPACITANCE RANGE: Up to + 40°C, ± 1.5% for a period of two years 1000pF to 15µF DERATING FOR DC AND AC. CATEGORY VOLTAGE UC: CAPACITANCE TOLERANCES: ± 20% (M), ± 10% (K), ± 5% (J) RATED VOLTAGES (UR): At + 85°C: UC = 1.0 UR At + 100°C: UC = 0.8 UR PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz: SELF INDUCTANCE: 63 VDC, 100 VDC, 250 VDC, 400 VDC, 630 VDC, 1000 VDC 40 VAC, 63 VAC, 160 VAC, 200 VAC, 220 VAC, 220 VAC ~ 6 nH measured with 2mm long leads TEST VOLTAGE (ELECTRODE/ELECTRODE): PULL TEST ON LEADS: 1.6 x UR for 2 s ≥ 30 N in direction of leads according to IEC 60068-2-21 INSULATION RESISTANCE: RELIABILITY: Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute Operational life > 300,000 h Failure rate < 2 FIT (40°C and 0.5 x UR) For C ≤ 0.33µF and UR > 100 VDC: 30,000 MΩ minimum value (100,000 MΩ typical value) For C ≤ 0.33µF and UR ≤ 100 VDC: For further details, please refer to the general information provided in this catalog. 15,000 MΩ minimum value (50,000 MΩ typical value) MAXIMUM PULSE RISE TIME PCM Maximum pulse rise time dv/dt [V/µs] (mm) 63 VDC 100 VDC 250 VDC 400 VDC 630 VDC 1000 VDC 10 15 22.5 27.5 11 7 4 3 13 8 5 4 22 13 8 6 37 21 13 10 60 33 19 14 130 65 34 25 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. DISSIPATION FACTOR TAN δ MEASURED AT 1kHz 10kHz 100kHz Document Number 26012 Revision 02-Dec-03 C ≤ 0.1µF -3 8 x 10 15 x 10-3 25 x 10-3 0.1µF < C ≤ 1.0µF -3 8 x 10 15 x 10-3 — Maximum values For technical questions, contact [email protected] C > 1.0µF 10 x 10-3 — — www.vishay.com 47 MKT 1822 Vishay Roederstein Metallized Polyester, Related Document.: IEC 60384-2 CAPACITANCE CAPACITANCE CODE VOLTAGE CODE 06 63 VDC/40 VAC VOLTAGE CODE 01 100 VDC/63 VAC VOLTAGE CODE 25 250 VDC/160 VAC W H L PCM W H L PCM W H L PCM 1000 pF - 210 — — — — — — — — — — — — 1500 pF - 215 — — — — — — — — — — — — 2200 pF - 222 — — — — — — — — — — — — 3300 pF - 233 — — — — — — — — — — — — 4700 pF - 247 — — — — — — — — — — — — 6800 pF - 268 — — — — — — — — — — — — 0.01 µF - 310 — — — — — — — — — — — — 0.015 µF - 315 — — — — — — — — — — — — 0.022 µF - 322 — — — — — — — — — — — — 0.033 µF - 333 — — — — — — — — 4.0 9.0 13.0 10 0.047 µF - 347 — — — — — — — — 4.0 9.0 13.0 10 0.068 µF - 368 — — — — 4.0 9.0 13.0 10 4.5 9.5 13.0 10 0.1 µF - 410 — — — — 4.0 9.0 13.0 10 5.5 10.5 18.0 15 0.15 µF - 415 — — — — 4.0 9.0 13.0 10 5.5 10.5 18.0 15 0.22 µF - 422 4.0 9.0 13.0 10 4.5 9.5 13.0 10 5.5 10.5 18.0 15 0.33 µF - 433 4.0 9.0 13.0 10 5.5 10.5 18.0 15 6.5 12.5 18.0 15 0.47 µF - 447 5.5 10.5 13.0 10 5.5 10.5 18.0 15 6.5 14.5 26.5 22.5 0.68 µF - 468 5.5 10.5 18.0 15 6.5 12.5 18.0 15 7.5 15.5 26.5 22.5 1.0 µF - 510 5.5 10.5 18.0 15 7.5 13.5 18.0 15 8.5 16.5 26.5 22.5 1.5 µF - 515 6.5 12.5 18.0 15 7.5 15.5 26.5 22.5 9.0 18.5 31.5 27.5 2.2 µF - 522 7.5 13.5 18.0 15 8.5 16.5 26.5 22.5 11.5 20.5 31.5 27.5 3.3 µF - 533 7.5 15.5 26.5 22.5 10.5 18.5 26.5 22.5 13.5 23.5 31.5 27.5 4.7 µF - 547 8.5 16.5 26.5 22.5 11.5 20.5 31.5 27.5 — — — — 6.8 µF - 568 10.5 18.5 26.5 22.5 13.5 23.5 31.5 27.5 — — — — 10.0 µF - 610 11.5 20.5 31.5 27.5 15.0 24.5 31.5 27.5 — — — — 15.0 µF - 615 13.5 23.5 31.5 27.5 16.5 29.5 31.5 27.5 — — — — RECOMMENDED PACKAGING LETTER CODE D G F W V G — TYPE OF PACKAGING AMMO AMMO REEL REEL REEL AMMO BULK HEIGHT (H) ORDERING CODE EXAMPLE (mm) REEL DIAMETER (mm) 16.5 18.5 16.5 18.5 18.5 18.5 — S* S* 350 350 500 L* — MKT 1822-422-065-D MKT 1822-422-065-G MKT 1822-422-065-F MKT 1822-422-065-W MKT 1822-510-255-V MKT 1822-510-255-G MKT 1822-510-255 PCM PCM PCM 10 15 22.5 - 27.5 X X X X — — X X X X X X — X — — — — X X X *S = box size 55 x 210 x 340mm (W x H x L) *L = box size 60 x 360 x 510mm (W x H x L) www.vishay.com 48 For technical questions, contact [email protected] Document Number 26012 Revision 02-Dec-03 MKT 1822 Metallized Polyester, Related Document.: IEC 60384-2 Vishay Roederstein VOLTAGE CODE 40 400 VDC/200 VAC CAPACITANCE CAPACITANCE CODE VOLTAGE CODE 63* 630 VDC/220 VAC VOLTAGE CODE 10* 1000 VDC/220 VAC W H L PCM W H L PCM W H L PCM 1000 pF - 210 4.0 9.0 13.0 10 4.0 9.0 13.0 10 4.0 9.0 13.0 10 1500 pF - 215 4.0 9.0 13.0 10 4.0 9.0 13.0 10 4.0 9.0 13.0 10 2200 pF - 222 4.0 9.0 13.0 10 4.0 9.0 13.0 10 4.0 9.0 13.0 10 3300 pF - 233 4.0 9.0 13.0 10 4.0 9.0 13.0 10 4.0 9.0 13.0 10 4700 pF - 247 4.0 9.0 13.0 10 4.0 9.0 13.0 10 5.5 10.5 13.0 10 6800 pF - 268 4.0 9.0 13.0 10 4.0 9.0 13.0 10 6.5 11.5 13.0 10 0.01 µF - 310 4.0 9.0 13.0 10 4.0 9.0 13.0 10 5.5 10.5 18.0 15 0.015 µF - 315 4.0 9.0 13.0 10 5.5 10.5 13.0 10 6.5 12.5 18.0 15 0.022 µF - 322 4.0 9.0 13.0 10 6.5 11.5 13.0 10 7.5 13.5 18.0 15 0.033 µF - 333 4.0 9.0 13.0 10 5.5 10.5 18.0 15 6.5 14.5 26.5 22.5 0.047 µF - 347 5.5 10.5 18.0 15 6.5 12.5 18.0 15 7.5 15.5 26.5 22.5 0.068 µF - 368 5.5 10.5 18.0 15 7.5 13.5 18.0 15 8.5 16.5 26.5 22.5 0.1 µF - 410 5.5 10.5 18.0 15 6.5 14.5 26.5 22.5 10.5 18.5 26.5 22.5 0.15 µF - 415 6.5 12.5 18.0 15 7.5 15.5 26.5 22.5 11.5 20.5 31.5 27.5 0.22 µF - 422 7.5 15.5 26.5 22.5 8.5 16.5 26.5 22.5 13.5 23.5 31.5 27.5 0.33 µF - 433 8.5 16.5 26.5 22.5 11.5 20.5 31.5 27.5 16.5 29.5 31.5 27.5 0.47 µF - 447 10.5 18.5 26.5 22.5 11.5 20.5 31.5 27.5 20.0 35.0 31.5 27.5 0.68 µF - 468 11.5 20.5 31.5 27.5 13.5 23.5 31.5 27.5 — — — — 1.0 µF - 510 11.5 20.5 31.5 27.5 15.0 24.5 31.5 27.5 — — — — 1.5 µF - 515 13.5 23.5 31.5 27.5 — — — — — — — — 2.2 µF - 522 — — — — — — — — — — — — 3.3 µF - 533 — — — — — — — — — — — — 4.7 µF - 547 — — — — — — — — — — — — 6.8 µF - 568 — — — — — — — — — — — — 10.0 µF - 610 — — — — — — — — — — — — 15.0 µF - 615 — — — — — — — — — — — — Further C-values upon request. *Not suitable for mains applications. Please refer to X-capacitors in out catalog “RFI Suppression Components”. RECOMMENDED PACKAGING LETTER CODE D G F W V G — TYPE OF PACKAGING AMMO AMMO REEL REEL REEL AMMO BULK HEIGHT (H) ORDERING CODE EXAMPLE (mm) REEL DIAMETER (mm) 16.5 18.5 16.5 18.5 18.5 18.5 — S* S* 350 350 500 L* — MKT 1822-422-065-D MKT 1822-422-065-G MKT 1822-422-065-F MKT 1822-422-065-W MKT 1822-510-255-V MKT 1822-510-255-G MKT 1822-522-255 PCM PCM PCM 10 15 22.5 - 27.5 X X X X — — X X X X X X — X — — — — X X X *S = box size 55 x 210 x 340mm (W x H x L) *L = box size 60 x 360 x 510mm (W x H x L) Document Number 26012 Revision 02-Dec-03 For technical questions, contact [email protected] www.vishay.com 49 MKT 1822 V RMS 100 Capacitance in µF 7 5 V RMS Vishay Roederstein Metallized Polyester, Related Document.: IEC 60384-2 0.3 3 0.6 8 1.5 3 2 10 7 5 100 7 5 Capacitance in µF 0.1 0.3 3 0.6 8 3 2 1.5 3.3 10 7 5 3.3 6.8 10 3 2 4.7 10 3 2 15 15 100 VDC 63 VDC 1 1 102 2 3 5 7 103 2 3 104 5 7 2 3 5 7 105 102 2 3 5 7 103 2 3 104 5 7 2 3 5 7 105 f [Hz] f [Hz] V RMS 1000 Capacitance in µF 7 5 V RMS Permissible AC Voltage versus Frequency Permissible AC Voltage versus Frequency 3 1000 Capacitance in pF and µF 7 5 3 2 2 10 00 0.0 33 100 7 5 47 3.3 3 2 2.2 1 0.4 7 22 100 7 5 0.0 0.1 0.2 00 1.5 1 0.4 2 3 7 0.22 3 2 2 250 VDC 47 00 0.0 22 0.0 1 0.1 0 .04 7 400 VDC 10 10 102 2 3 5 7 103 2 3 104 5 7 2 5 7 105 3 102 2 3 5 7 103 104 5 7 2 3 f [Hz] 1000 Permissible AC Voltage versus Frequency Capacitance in pF and µF 7 5 3 V RMS V RMS Permissible AC Voltage versus Frequency 5 7 105 f [Hz] 1000 Capacitance in pF and µF 7 5 3 2 47 00 10 22 2 00 00 0.0 100 7 5 1.0 630 VDC 00 0.4 100 7 5 1 0.0 2 3 2 10 2 0.0 47 0.1 0.4 7 0.2 7 0.2 2 0.1 0.0 47 0.0 22 22 00 0.0 1 47 00 3 2 1000 VDC 2 10 10 102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 102 2 3 5 7 103 2 3 104 5 7 f [Hz] Permissible AC Voltage versus Frequency www.vishay.com 50 2 3 5 7 105 f [Hz] Permissible AC Voltage versus Frequency For technical questions, contact [email protected] Document Number 26012 Revision 02-Dec-03