KP/MKP 375 www.vishay.com Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors KP/MKP Radial Lacquered Type l l w FEATURES w • 10 mm to 27.5 mm pitch seating plane (1) h h' α° lt 10 (2) F' (3) F H Ø dt A P • Supplied loose in box (including lock lead versions) and taped Ø dt • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 15 Dimensions in mm (1) Hole Ø 1.3 for dt = 0.8 mm (2) 0 ≤ α < 50° (3) |F - F’| < 0.3 mm F = 7.5 + 0.6 / - 0.1 mm (4) A = 2.0 + 1.0 / - 0.5 mm for 10 mm pitch A = 2.5 + 1.5 / - 0.5 mm for 15 mm pitch A = 2.5 + 1.4 / - 0.5 mm for pitch > 22.5 mm l ENCAPSULATION Flame retardant epoxy material (Class UL 94 V-0) CLIMATIC TESTING CLASS ACCORDING TO IEC 60068-1 w double conical hole • Bent back version for automatic insertion available 55/105/56 CAPACITANCE RANGE (E24 SERIES) h 0.1 nF to 270 nF 1.6 lt > 0.5 Ø dt P A A β β ϒ ϒ magnified view direction A β ≤ 15 Dimensions in mm CAPACITANCE TOLERANCE ± 5 %; ± 3.5 % LEADS APPLICATIONS Tinned wire Where high currents and steep pulses occur. For deflection circuits in television sets. RATED TEMPERATURE REFERENCE SPECIFICATIONS 85 °C IEC 60384-17 MAXIMUM APPLICATION TEMPERATURE MARKING 105 °C C-value; tolerance; rated voltage; manufacturer’s type; manufacturer’s location PERFORMANCE GRADE DIELECTRIC for C > 5.6 nF: grade 1 (long life) for C 5.6 nF: grade 2 Polypropylene film ELECTRODES Metallized and aluminum STABILITY GRADE Grade 2 CONSTRUCTION DETAIL SPECIFICATION Internal serial construction For more detailed data and test requirements contact: [email protected] RATED (DC) VOLTAGE 630 V, 1000 V, 1600 V, 2000 V RATED (AC) VOLTAGE 300 V, 400 V, 500 V, 600 V RATED PEAK-TO-PEAK VOLTAGE 850 V, 1100 V, 1400 V, 1700 V Revision: 10-Aug-15 Document Number: 28127 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents COMPOSITION OF CATALOG NUMBER TYPE AND PITCHES 10.0 mm/7.5 mm 15.0 mm/7.5 mm 375 MULTIPLIER (nF) CAPACITANCE (numerically; but not for lock lead) 10.0 mm 0.01 1 0.1 2 15.0 mm 1 3 22.5 mm 10 4 27.5 mm Example: BFC2 375 XX YY Y 2222 (1) 375 XX YY Y (1) old TYPE PACKAGING Loose in box 375 Taped on reel (2) (bent back) 104 = 10 x 10 = 100 nF ordering number LEAD CONFIGURATION Lead length 5.0 mm ± 1.0 mm Lock lead 4.0 mm + 1.0/- 0.5 mm H = 16.0 mm; P0 = 15.0 mm; Reel diameter 500 mm PREFERRED TYPES C-TOL. ±5% ±5% ±5% 630 V 1000 V 1600 V 2000 V 14 24 34 44 90 90 90 90 16 26 36 46 Dimensions of this code numbers stays between brackets ON REQUEST Lead length 5.0 ± 1.0 mm Loose in box 375 Taped on reel (2) Taped on reel (2) (bent back) Lead length 3.5 ± 0.5 mm H = 16.0 mm; P0 = 12.7 mm; Reel diameter = 500 mm H = 16.0 mm; P0 = 15.0 mm; Reel diameter = 500 mm H = 16.0 mm; P0 = 15.0 mm; Reel diameter = 356 mm ± 3.5 % ±5% ± 3.5 % ±5% ± 3.5 % ± 3.5 % ±5% 15 25 35 45 10 20 30 40 11 21 31 41 12 22 32 42 13 23 33 43 17 27 37 47 Dimensions of this code numbers stays between brackets 18 28 38 48 Note (2) For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139 or end of catalog SPECIFIC REFERENCE DATA (630 VDC) DESCRIPTION Tangent of loss angle at (x 10-4) Pitch = 10 mm, 15 mm, and 7.5 mm (bent back) Pitch = 22.5 mm Pitch = 27.5 mm Rated voltage pulse slope (dU/dt)R: Pitch = 10 mm Pitch = 15 mm and 7.5 mm (bent back) Pitch = 22.5 mm Pitch = 27.5 mm R between leads at 500 V, 1 min R between interconnected leads and case, 500 V, 1 min Ionization (AC) voltage (typical value) at 50 pC peak discharge at 50 pC peak discharge at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA), rise time 1000 V/s for C 47 nF for C > 47 nF Withstanding (DC) voltage between leads and case Maximum application temperature Revision: 10-Aug-15 VALUE 10 kHz 6 8 8 100 kHz 10 15 20 15 000 V/μs 8000 V/μs 2800 V/μs 1900 V/μs > 100 000 M > 100 000 M > 400 V 1008 V, 1 min 2840 V, 1 min 105 °C Document Number: 28127 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents URDC = 630 V; URAC = 300 V; UPP = 850 V (KINKED); C-TOL. = ± 5 % CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING LOOSE IN BOX C C (pF) 680 750 DIMENSIONS w x h (h’) x l (mm) MASS (g) (1) LEADS 5 mm ± 1.0 mm ORIGINAL PITCH Ø 500 mm Ø 500 mm Ø 356 mm XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm PITCH = 10.0 mm 5.0 x 13.0 x 14.5 0.65 14... (2000) 12... (1200) 820 910 1200 PITCH = 7.5 mm (BENT BACK) ..YYY PITCH = 7.5 mm (BENT BACK) 681 751 821 0.70 911 1000 1100 C VALUE REEL 102 5.5 x 13.5 x 14.5 0.75 14... (2000) 12... (1100) 1300 112 122 132 1500 0.80 1600 0.85 162 1800 0.80 182 2000 2200 6.0 x 14.0 x 14.5 2400 2700 0.85 0.90 152 14... (1750) 12... (1000) 1.0 6.5 x 14.5 x 14.5 1.1 202 222 242 14... (1500) 12... (900) 272 Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 10-Aug-15 Document Number: 28127 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents URDC = 630 V; URAC = 300 V; UPP = 850 (KINKED); C-TOL. = ± 5 % CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING LOOSE IN BOX C VALUE REEL DIMENSIONS w x h (h’) x l (mm) MASS (g) (1) 5.0 x 14.0 (16.0) x 18.5 1.0 14... (2000) 12... (1200) 16... (1000) 18... (550) 5.5 x 14.5 (16.0) x 18.5 1.1 14... (2000) 12... (1100) 16... (900) 18... (500) 6.0 x 15.0 (16.0) x 18.5 1.2 14... (2000) 12... (1000) 16... (800) 18... (450) 6.5 x 15.5 (17.0) x 18.5 1.3 14… (1500) 12… (900) 16… (750) 18… (400) 22 000 7.0 x 16.0 (17.5) x 18.5 1.5 24 000 7.5 x 16.5 (18.0) x 18.5 1.6 14… (1500) 14… (1250) 12… (800) 12… (800) 16… (700) 16… (650) 18… (400) 18… (350) 27 000 30 000 8.0 x 17.0 (18.5) x 18.5 1.9 14… (1250) 12… (750) 16… (600) 18… (350) 273 303 33 000 8.5 x 17.5 (19.0) x 18.5 2 14… (1000) 12… (700) 16… (550) 18… (300) 333 9.0 x 18.5 (20.0) x 18.5 2.3 14… (900) 12… (600) 16… (500) 18… (300) On request C C (pF) 3000 3300 3600 3900 4300 4700 5100 5600 6200 6800 7500 8200 9100 10 000 11 000 12 000 13 000 15 000 16 000 18 000 20 000 36 000 39 000 C (μF) 0.036 0.039 0.043 0.047 0.051 0.056 0.062 ORIGINAL PITCH Ø 500 mm XX XX (SPQ) (SPQ) PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm LEADS 5 mm ± 1.0 mm PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm PITCH = 22.5 mm PITCH = 7.5 mm (BENT BACK) Ø 500 mm Ø 356 mm XX XX (SPQ) (SPQ) PITCH = 7.5 mm (BENT BACK) ..YYY 302 332 362 392 432 472 512 562 622 682 752 822 912 103 113 123 133 153 163 183 203 223 243 PITCH = 7.5 mm (BENT BACK) 7.0 x 20.0 x 26.0 2.7 14… (650) - - - 363 393 433 473 513 563 623 0.068 7.5 x 20.5 x 26.0 3 14… (600) - - - 683 0.075 0.082 8.0 x 21.0 x 26.0 3.3 14… (550) - - - 753 823 0.091 8.5 x 21.5 x 26.0 3.8 - - - 913 0.1 9.0 x 22.0 x 26.0 4 - - - 104 14… (500) 14… (450) Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 10-Aug-15 Document Number: 28127 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents URDC = 630 V; URAC = 300 V; UPP = 850 (KINKED); C-TOL. = ± 5 % C C (μF) 0.11 0.12 C (μF) 0.13 0.15 0.16 0.18 0.2 0.22 0.24 0.27 CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING LOOSE IN BOX REEL DIMENSIONS ORIGINAL PITCH PITCH = 7.5 mm (BENT BACK) MASS LEADS w x h (h’) x l (g) (1) 5 mm ± 1.0 mm Ø 500 mm Ø 500 mm Ø 356 mm (mm) XX XX XX XX (SPQ) (SPQ) (SPQ) (SPQ) PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm PITCH = 22.5 mm PITCH = 7.5 mm (BENT BACK) 14… 9.5 x 22.5 x 26.0 4.3 (400) 14… 10.0 x 23.0 x 26.0 4.7 (400) PITCH = 27.5 mm ± 0.5 mm; dt = 0.80 mm ± 0.08 mm PITCH = 27.5 mm PITCH = 7.5 mm (BENT BACK) 14… 9.5 x 22.5 x 30.0 4.7 (500) 14… 10.0 x 23.0 x 30.0 5.2 (500) 14… 10.5 x 23.5 x 30.0 5.5 (450) 14… 11.0 x 24.0 x 30.0 6 (400) 14… 11.5 x 24.5 x 30.0 6.6 (400) 14… 12.5 x 25.5 x 30.0 7.1 (350) 14… 13.0 x 26.0 x 30.0 7.7 (300) 14… 13.5 x 26.5 x 30.0 8.5 (300) C VALUE ..YYY 114 124 134 154 164 184 204 224 244 274 Notes • Loose in box, all lengths have same SPQ • SPQ = Standard Packing Quantity (1) Net weight for short lead product only URDC = 630 V; URAC = 300 V; UPP = 850 V (LOCK LEAD); C-TOL. = ± 5 % C DIMENSIONS w x h (h’) x l (mm) MASS (g) (1) CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING LOOSE IN BOX It = 4.0 mm + 1.0 mm/- 0.5 mm (SPQ) C (pF) 680 750 820 910 1000 1100 1300 1500 1600 1800 2000 2200 2400 2700 5.0 x 16.0 x 14.5 5.5 x 16.5 x 14.5 6.0 x 17.0 x 14.5 6.5 x 17.5 x 14.5 0.65 0.7 0.7 0.7 0.75 0.75 0.80 0.85 0.80 0.85 0.90 1.0 1.1 PITCH = 10.0 mm ± 1.0 mm; dt = 0.60 mm ± 0.06 mm 90308 90309 90311 90312 90313 90314 90316 90317 90318 90319 90321 90322 90323 90324 (2000) (2000) (1750) (1500) Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 10-Aug-15 Document Number: 28127 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents URDC = 630 V; URAC = 300 V; UPP = 850 V (LOCK LEAD); C-TOL. = ± 5 % CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING C DIMENSIONS w x h (h’) x l (mm) LOOSE IN BOX MASS (g) (1) It = 4.0 mm + 1.0 mm/- 0.5 mm (SPQ) PITCH = 15.0 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm C (pF) 3000 3300 5.0 x 17.0 x 18.5 1 90325 90326 3600 90327 3900 90328 4300 4700 5.5 x 17.5 x 18.5 1.1 90329 90331 5100 90332 5600 90333 6200 90334 6800 90335 7500 90336 8200 90337 9100 90338 10 000 6.0 x 18.0 x 18.5 1.3 90339 11 000 90236 12 000 90341 13 000 90342 15 000 90343 16 000 90344 18 000 90218 (2000) (2000) (2000) 6.5 x 18.5 x 18.5 1.4 22 000 7.0 x 19.0 x 18.5 1.5 90219 (1500) 24 000 7.5 x 19.5 x 18.5 1.6 90221 (1400) 20 000 27 000 30 000 33 000 36 000 39 000 90345 90223 8.0 x 20.0 x 18.5 1.9 8.5 x 20.5 x 18.5 2 90347 (1200) 9.0 x 21.5 x 18.5 2.3 On request (1000) C (μF) 90346 90348 0.039 90349 0.043 90351 7.0 x 23.0 x 26.0 2.7 90352 0.051 90353 0.056 90354 0.062 0.068 0.075 0.082 0.091 (1250) PITCH = 22.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm 0.036 0.047 (1750) (600) 90355 7.5 x 23.5 x 26.0 3 8.0 x 24.0 x 26.0 3.3 8.5 x 24.5 x 26.0 3.8 Revision: 10-Aug-15 90356 90357 90358 90359 (550) (500) (450) Document Number: 28127 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING DIMENSIONS w x h (h’) x l (mm) C LOOSE IN BOX MASS (g) (1) It = 4.0 mm + 1.0 mm/- 0.5 mm (SPQ) C (μF) PITCH = 22.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm 0.1 9.0 x 25.0 x 26.0 4.0 90361 (450) 0.11 9.5 x 25.5 x 26.0 4.3 90362 (400) 0.12 10.0 x 26.0 x 26.0 4.7 90363 (350) C (μF) PITCH = 27.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm 0.13 9.5 x 25.5 x 30.0 4.7 90364 (450) 0.15 10.0 x 26.0 x 30.0 5.2 90365 (400) 0.16 10.5 x 26.5 x 30.0 5.5 90366 (350) 0.18 11.0 x 27.0 x 30.0 6.0 90367 (350) 0.2 11.5 x 27.5 x 30.0 6.6 90368 (350) 0.22 12.5 x 28.5 x 30.0 7.1 90369 (300) 0.24 13.0 x 29.0 x 30.0 7.7 90371 (250) 0.27 13.5 x 29.5 x 30.0 8.5 90372 (250) Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only SPECIFIC REFERENCE DATA (1000 VDC) DESCRIPTION Tangent of loss angle at (x 10-4) VALUE 10 kHz 100 kHz Pitch = 10 mm, 15 mm, and 7.5 mm (bent back) 6 10 Pitch = 22.5 mm 8 15 Pitch = 27.5 mm 8 20 Rated voltage pulse slope (dU/dt): Pitch = 10 mm 27 000 V/μs Pitch = 15 mm and 7.5 mm (bent back) 15 000 V/μs Pitch = 22.5 mm Pitch = 27.5 mm 5000 V/μs 3300 V/μs R between leads at 500 V, 1 min > 100 000 M R between interconnected leads and case, 500 V, 1 min > 100 000 M Ionization (AC) voltage (typical value) at 50 pC peak discharge > 500 V at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA), rise time 1000 V/s for C 47 nF 1600 V, 1 min [1.6 - (0.0364 x (C- 47))] x 1000 V, 1 min for C > 47 nF Withstanding (DC) voltage between leads and case Maximum application temperature Revision: 10-Aug-15 2840 V, 1 min 105 °C Document Number: 28127 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents URDC = 1000 V; URAC = 400 V; UPP = 1100 V (KINKED); C-TOL. = ± 5 % CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING C C (pF) 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 1100 1200 1300 1500 C (pF) 1600 1800 2000 2200 2400 2700 3000 3300 3600 3900 4300 4700 5100 5600 DIMENSIONS w x h (h’) x l (mm) LOOSE IN BOX MASS (g) (1) LEADS 5 mm ± 1.0 mm XX (SPQ) PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm 5.0 x 13.0 x 14.5 0.5 24… (2000) 0.55 0.55 0.55 0.55 0.60 0.60 0.60 0.60 0.60 0.60 24… 5.5 x 13.5 x 14.5 (2000) 0.65 0.70 0.75 0.75 0.80 0.80 0.80 0.70 0.70 0.70 0.75 0.85 24… 0.90 6.0 x 14.0 x 14.5 (1750) 0.85 0.90 PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm C VALUE REEL ORIGINAL PITCH Ø 500 mm XX (SPQ) PITCH = 10.0 mm PITCH = 7.5 mm (BENT BACK) Ø 500 mm Ø 356 mm XX XX (SPQ) (SPQ) PITCH = 7.5 mm (BENT BACK) 22… (1200) - - 22… (1100) - - 22… (1000) - - PITCH = 15.0 mm ..YYY 101 111 121 131 151 161 181 201 221 241 271 301 331 361 391 431 471 511 561 621 681 751 821 911 102 112 122 132 152 PITCH = 7.5 mm (BENT BACK) 5.5 x 14.5 (16.0) x 18.5 1.1 24… (2000) 22… (1100) 26… (900) 28… (500) 6.0 x 15.0 (16.5) x 18.5 1.2 24… (2000) 22… (1000) 26… (800) 28… (450) 162 182 202 222 242 272 302 332 362 392 432 472 512 562 Notes • Loose in box, all lengths have same SPQ • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 10-Aug-15 Document Number: 28127 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents URDC = 1000 V; URAC = 400 V; UPP = 1100 V (KINKED); C-TOL. = ± 5 % C C (pF) 6200 6800 7500 8200 9100 10 000 11 000 12 000 13 000 15 000 C (μF) 0.016 0.018 0.02 0.022 0.024 0.027 0.03 0.033 0.036 0.039 0.043 C (μF) 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.10 0.11 0.12 0.13 0.15 CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING LOOSE IN BOX REEL DIMENSIONS MASS ORIGINAL PITCH PITCH = 7.5 mm (BENT BACK) LEADS w x h (h’) x l (g) (1) 5 mm ± 1.0 mm Ø 500 mm Ø 500 mm Ø 356 mm (mm) XX XX XX XX (SPQ) (SPQ) (SPQ) (SPQ) PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm PITCH = 15.0 mm PITCH = 7.5 mm (BENT BACK) 24… 22… 26… 28… 6.0 x 15.0 (16.5) x 18.5 1.2 (2000) (1000) (800) (450) 7.0 x 16.0 (17.5) x 18.5 1.4 24… (1500) 24… (1250) 24… 8.0 x 17.0 (18.5) x 18.5 1.8 (1250) 24… 8.5 x 17.5 (19.0) x 18.5 1.9 (1000) 24… 9.0 x 18.5 (19.5) x 18.5 2.1 (1000) PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 24… 6.0 x 19.0 x 26.0 2.2 (800) 24… 6.5 x 19.5 x 26.0 2.5 (750) 24… 7.0 x 20.0 x 26.0 2.7 (650) 24… 7.5 x 20.5 x 26.0 3.1 (600) 24… 8.0 x 21.0 x 26.0 3.4 (550) 24… 8.5 x 21.5 x 26.0 3.7 (500) 24… 9.0 x 22.0 x 26.0 4.1 (450) PITCH = 27.5 mm ± 0.5 mm; dt = 0.80 mm ± 0.08 mm 24… 7.0 x 20.0 x 30.0 3.1 (1000) 24… 7.5 x 20.5 x 30.0 3.4 (750) 24… 8.0 x 21.0 x 30.0 3.8 (650) 24… 8.5 x 21.5 x 30.0 4.0 (550) 24… 9.0 x 22.0 x 30.0 4.4 (550) 24… 9.5 x 22.5 x 30.0 4.7 (500) 24… 10.0 x 23.0 x 30.0 5.1 (500) 24… 10.5 x 23.5 x 30.0 5.5 (450) 24… 11.0 x 24.0 x 30.0 5.9 (400) 24… 11.5 x 24.5 x 30.0 6.3 (400) 24... 12.0 x 25.0 x 30.0 6.8 (350) 24... 12.5 x 25.5 x 30.0 7.6 (350) 7.5 x 16.5 (18.0) x 18.5 1.6 22… (800) 22… (800) 22… (750) 22… (700) 22… (650) PITCH = 22.5 mm 26… (700) 28… (400) 26… 28… (650) (350) 26… 28… (600) (350) 26… 28… (550) (300) 26… 28… (550) (300) PITCH = 7.5 mm (BENT BACK) C VALUE ..YYY 622 682 752 822 912 103 113 123 133 153 163 183 203 223 243 - - - 273 303 333 363 393 433 PITCH = 27.5 mm PITCH = 7.5 mm (BENT BACK) 473 513 563 623 683 753 823 - - 913 104 114 124 134 154 Notes • Loose in box, all lengths have same SPQ • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 10-Aug-15 Document Number: 28127 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents URDC = 1000 V; URAC = 400 V; UPP = 1100 V (LOCK LEAD); C-TOL. = ± 5 % CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING C DIMENSIONS w x h (h’) x l (mm) LOOSE IN BOX MASS (g) (1) It = 4.0 mm + 1.0 mm/- 0.5 mm (SPQ) C (pF) PITCH = 10.0 mm ± 1.0 mm; dt = 0.60 mm ± 0.06 mm 100 90373 110 90374 120 5.0 x 16.0 x 14.5 0.5 130 90375 90376 150 0.55 90377 160 0.55 90378 180 0.55 90379 200 0.55 90281 220 0.60 90382 240 0.60 90383 270 0.60 90384 300 0.60 90385 330 0.60 90386 360 0.60 90387 0.65 90388 430 0.70 90389 470 0.75 90391 510 0.75 90392 560 0.80 90393 620 0.80 90394 680 0.80 90395 750 0.70 90396 820 0.70 90397 910 0.70 90398 1000 0.75 90399 1100 0.85 90401 0.90 90402 0.85 90403 0.90 90404 390 1200 5.5 x 16.5 x 14.5 6.0 x 17.0 x 14.5 1300 1500 1600 (1750) 90405 1800 90406 5.5 x 17.5 x 18.5 1.1 90407 2200 90408 2400 90409 2700 90411 3000 90412 3300 90413 3600 90414 3900 4300 (2000) PITCH = 15.0 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm C (pF) 2000 (2000) (2000) 90415 6.0 x 18.0 x 18.5 1.2 90416 4700 90417 5100 90418 5600 90419 6200 90421 6800 90422 Revision: 10-Aug-15 (2000) Document Number: 28127 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING C DIMENSIONS w x h (h’) x l (mm) LOOSE IN BOX MASS (g) (1) It = 4.0 mm + 1.0 mm/- 0.5 mm (SPQ) C (pF) PITCH = 15.0 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm 7500 8200 90232 7.0 x 19.0 x 18.5 1.5 7.5 x 19.5 x 18.5 1.6 8.0 x 20.0 x 18.5 1.8 13 000 8.5 x 20.5 x 18.5 1.9 90428 (1200) 15 000 9.0 x 21.0 x 18.5 2.1 90429 (1100) 9100 10 000 11 000 12 000 0.018 0.02 0.022 0.024 0.027 0.03 0.033 0.036 0.039 0.043 90425 90426 90427 (1400) (1250) PITCH = 22.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm 6.0 x 22.0 x 26.0 2.2 6.5 x 22.5 x 26.0 2.5 7.0 x 23.0 x 26.0 2.7 7.5 x 23.5 x 26.0 3.1 8.0 x 24.0 x 26.0 3.4 8.5 x 24.5 x 26.0 3.8 9.0 x 25.0 x 26.0 4.1 C (μF) 0.047 (1500) 90424 C (μF) 0.016 90423 90431 90432 90433 90434 90435 90436 90437 90438 90439 90224 90441 (750) (700) (600) (550) (500) (450) (450) PITCH = 27.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm 7.0 x 23.0 x 30.0 3.1 7.5 x 23.5 x 30.0 3.4 0.062 8.0 x 24.0 x 30.0 3.8 90445 (550) 0.068 8.5 x 24.5 x 30.0 4.0 90446 (550) 0.075 9.0 x 25.0 x 30.0 4.4 90447 (450) 0.082 9.5 x 25.5 x 30.0 4.7 90448 (450) 0.091 10.0 x 26.0 x 30.0 5.1 90449 (400) 0.1 10.5 x 26.5 x 30.0 5.5 90451 (350) 0.11 11.0 x 27.0 x 30.0 5.9 90452 (350) 0.12 11.5 x 27.5 x 30.0 6.3 90453 (350) 0.13 12.0 x 28.0 x 30.0 6.8 90454 (350) 0.15 12.0 x 28.5 x 30.0 7.6 90455 (300) 0.051 0.056 90442 90443 90444 (800) (600) Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 10-Aug-15 Document Number: 28127 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents SPECIFIC REFERENCE DATA (1600 VDC) DESCRIPTION Tangent of loss angle at (x VALUE 10-4): 10 kHz 100 kHz Pitch = 10 mm, 15 mm and 7.5 mm (bent back) 6 10 Pitch = 22.5 mm 6 15 Pitch = 27.5 mm 6 20 Rated voltage pulse slope (dU/dt): Pitch = 10 mm Pitch = 15 mm and 7.5 mm (bent back) 21 000 V/μs Pitch = 22.5 mm 7000 V/μs Pitch = 27.5 mm 4700 V/μs R between leads at 500 V, 1 min > 100 000 M R between interconnected leads and case, 500 V, 1 min > 100 000 M Ionization (AC) voltage (typical value) at 50 pC peak discharge > 550 V at 10 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA), rise time 1000 V/s for C 47 nF 2560 V, 1 min for C > 47 nF Withstanding (DC) voltage between leads and case 2840 V, 1 min Maximum application temperature 105 °C URDC = 1600 V; URAC = 500 V; UPP = 1400 V (KINKED); C-TOL. = ± 5 % CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING LOOSE IN BOX C C (pF) DIMENSIONS w x h (h’) x l (mm) MASS (g) (1) C VALUE REEL LEADS 5 mm ± 1.0 mm ORIGINAL PITCH Ø 500 mm Ø 500 mm Ø 356 mm XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm PITCH = 15.0 mm PITCH = 7.5 mm (BENT BACK) PITCH = 7.5 mm (BENT BACK) 680 750 681 5.5 x 14.5 (15.0) x 18.5 0.75 34… (2000) 32… (1100) 36… (900) 38… (500) 820 0.8 1000 0.85 0.90 1300 0.95 1600 1800 2000 2200 2400 2700 911 0.85 6.0 x 15.0 (15.5) x 18.5 1200 1500 751 821 910 1100 ..YYY 102 34… (2000) 32… (1000) 36… (800) 38… (450) 112 122 132 5.5 x 14.5 (16.0) x 18.5 1.1 34… (2000) 32… (1100) 36… (900) 38… (500) 6.0 x 15.0 (16.5) x 18.5 1.2 34… (2000) 32… (1000) 36… (800) 38… (450) 6.5 x 15.5 (17.0) x 18.5 1.3 34… (1500) 32… (900) 36… (750) 38… (400) 7.0 x 16.0 (17.5) x 18.5 1.4 34… (1500) 32… (800) 36… (700) 38… (400) 152 162 182 202 222 242 272 7.5 x 16.5 (18.0) x 18.5 1.6 34… (1250) 32… (800) 36… (650) 38… (350) 3300 8.0 x 17.0 (18.5) x 18.5 1.7 34… (1250) 32… (750) 36… (600) 38… (350) 332 3600 8.5 x 17.5 (19.0) x 18.5 1.8 34… (1000) 32… (700) 36… (550) 38… (300) 362 9.0 x 18.5 (19.5) x 18.5 2.0 34… (1000) 32… (650) 36… (550) 38… (300) 3000 3900 4300 Revision: 10-Aug-15 302 392 432 Document Number: 28127 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING LOOSE IN BOX C C (μF) DIMENSIONS w x h (h’) x l (mm) MASS (g) (1) C VALUE REEL LEADS 5 mm ± 1.0 mm ORIGINAL PITCH Ø 500 mm Ø 500 mm Ø 356 mm XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm PITCH = 22.5 mm PITCH = 7.5 mm (BENT BACK) PITCH = 7.5 mm (BENT BACK) 472 0.0047 0.0051 6.0 x 19.0 x 26.0 2.0 34… (800) 512 0.0056 0.0062 0.0068 0.0075 0.0082 ..YYY 562 6.5 x 19.5 x 26.0 2.1 34… (750) 622 7.0 x 20.0 x 26.0 2.3 34… (650) 752 682 822 0.0091 7.5 x 20.5 x 26.0 2.5 34… (600) 0.01 8.0 x 21.0 x 26.0 2.6 34… (550) 8.5 x 21.5 x 26.0 2.9 34… (500) 133 0.011 0.012 912 - - - 103 113 123 0.013 9.0 x 22.0 x 26.0 3.1 34… (450) 0.015 9.5 x 22.5 x 26.0 3.5 34… (400) 153 0.016 10.0 x 23.0 x 26.0 3.6 34… (400) 163 0.018 10.5 x 23.5 x 26.0 4.0 34… (350) 183 C (μF) PITCH = 27.5 mm ± 0.5 mm; dt = 0.80 mm ± 0.08 mm PITCH = 27.5 mm PITCH = 7.5 mm (BENT BACK) 0.02 9.0 x 22.0 x 30.0 4.2 34… (550) 0.022 9.5 x 22.5 x 30.0 4.4 34… (500) 223 0.024 10.0 x 23.0 x 30.0 4.7 34… (500) 243 0.027 10.5 x 23.5 x 30.0 5.2 34… (450) 203 273 - - - 0.03 11.0 x 24.0 x 30.0 5.6 34… (400) 0.033 11.5 x 24.5 x 30.0 6.0 34… (400) 333 0.036 12.0 x 25.0 x 30.0 6.5 34… (350) 363 0.039 12.5 x 25.5 x 30.0 6.9 34… (350) 393 303 Notes • Loose in box, all lengths have same SPQ • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 10-Aug-15 Document Number: 28127 13 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents URDC = 1600 V; URAC = 500 V; UPP = 1400 V (LOCK LEAD); C-TOL. = ± 5 % CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING C DIMENSIONS w x h (h’) x l (mm) MASS (g) (1) LOOSE IN BOX It = 4.0 mm + 1.0 mm/- 0.5 mm (SPQ) C (pF) 680 750 820 910 1000 1100 1200 1300 1500 1600 1800 2000 2200 2400 2700 3000 3300 3600 3900 4300 C (μF) 0.0047 0.0051 0.0056 0.0062 0.0068 0.0075 0.0082 0.0083 0.0091 0.01 0.011 0.012 0.013 0.015 0.016 0.018 C (μF) 0.02 0.022 0.024 0.027 0.03 0.033 0.036 0.039 5.5 x 17.5 x 18.5 0.75 6.0 x 18.0 x 18.5 0.80 0.85 0.85 0.90 0.95 5.5 x 17.5 x 18.5 1.1 6.0 x 18.0 x 18.5 1.2 6.5 x 18.5 x 18.5 1.3 7.0 x 19.0 x 18.5 1.4 7.5 x 19.5 x 18.5 1.6 8.0 x 20.0 x 18.5 8.5 x 20.5 x 18.5 1.9 2.3 9.0 x 21.5 x 18.5 2.5 6.0 x 22.0 x 26.0 2.4 6.5 x 22.5 x 26.0 2.6 7.0 x 23.0 x 26.0 2.8 7.5 x 23.5 x 26.0 8.0 x 24.0 x 26.0 2.9 3.2 8.5 x 24.5 x 26.0 3.4 9.0 x 25.0 x 26.0 9.5 x 25.5 x 26.0 10.0 x 26.0 x 26.0 10.5 x 26.5 x 26.0 3.6 4.0 4.3 4.7 9.0 x 25.0 x 30.0 9.5 x 25.5 x 30.0 10.0 x 26.0 x 30.0 10.5 x 26.5 x 30.0 11.0 x 27.0 x 30.0 11.5 x 27.5 x 30.0 12.0 x 28.0 x 30.0 12.5 x 28.5 x 30.0 4.2 4.4 4.7 5.2 5.6 6.0 6.5 6.9 PITCH = 15.0 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm 90456 90457 90458 90459 90461 90462 90463 90464 90465 90466 90467 90468 90469 90471 90472 90473 90141 90142 90143 90144 PITCH = 22.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm 90145 90146 90147 90148 90149 90151 90152 90202 90153 90154 90155 90156 90157 90158 90159 90161 PITCH = 27.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm 90474 90475 90476 90477 90478 90479 90481 90482 (2000) (2000) (2000) (2000) (1750) (1500) (1400) (1250) (1200) (1100) (750) (700) (600) (550) (500) (450) (450) (400) (350) (350) (450) (450) (400) (350) (350) (350) (300) (300) Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 10-Aug-15 Document Number: 28127 14 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents SPECIFIC REFERENCE DATA (2000 VDC) DESCRIPTION Tangent of loss angle at (x VALUE 10-4): 10 kHz 100 kHz Pitch = 10 mm, 15 mm, and 7.5 mm (bent back) 6 10 Pitch = 22.5 mm 6 10 Pitch = 27.5 mm 6 15 Rated voltage pulse slope (dU/dt): Pitch = 10 mm Pitch = 15 mm and 7.5 mm (bent back) 30 000 V/μs Pitch = 22.5 mm 10 000 V/μs Pitch = 27.5 mm 6700 V/μs R between leads at 500 V, 1 min > 100 000 M R between interconnected leads and case, 500 V, 1 min > 100 000 M Ionization (AC) voltage (typical value) at 50 pC peak discharge > 600 V at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA), rise time 1000 V/s for C 47 nF 3200 V, 1 min for C > 47 nF Withstanding (DC) voltage between leads and case 2840 V, 1 min Maximum application temperature 105 °C URDC = 2000 V; URAC = 600 V; UPP = 1700 (KINKED); C-TOL. = ± 5 % CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING LOOSE IN BOX C DIMENSIONS w x h (h’) x l (mm) MASS (g) (1) LEADS 5 mm ± 1.0 mm XX (SPQ) C (pF) PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm REEL ORIGINAL PITCH C VALUE PITCH = 7.5 mm (BENT BACK) Ø 500 mm Ø 500 mm Ø 356 mm XX (SPQ) XX (SPQ) XX (SPQ) PITCH = 15.0 mm ..YYY PITCH = 7.5 mm (BENT BACK) 100 0.75 101 110 0.75 111 120 0.75 121 130 0.75 131 150 0.75 151 160 0.75 161 180 0.75 181 200 0.75 201 220 0.75 240 5.5 x 14.5 (15.0) x 18.5 0.75 221 44… (2000) 42… (1100) 46… (900) 48… (500) 241 270 0.75 271 300 0.75 301 330 0.75 331 360 0.75 361 390 0.75 391 430 0.75 431 470 0.80 471 510 0.80 511 560 0.80 561 Revision: 10-Aug-15 Document Number: 28127 15 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING LOOSE IN BOX C DIMENSIONS w x h (h’) x l (mm) MASS (g) (1) LEADS 5 mm ± 1.0 mm XX (SPQ) C (pF) PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm 620 680 REEL ORIGINAL PITCH C VALUE PITCH = 7.5 mm (BENT BACK) Ø 500 mm Ø 500 mm Ø 356 mm XX (SPQ) XX (SPQ) XX (SPQ) PITCH = 15.0 mm PITCH = 7.5 mm (BENT BACK) 0.85 6.0 x 15.0 (15.5) x 18.5 750 0.85 621 44… (2000) 42… (1000) 46… (800) 48… (450) 42… (900) 46… (750) 48… (400) 821 911 0.90 681 751 820 6.5 x 15.5 (16.0) x 18.5 0.95 44… (1500) 910 5.5 x 14.5 (16.0) x 18.5 1.1 44… (2000) 42… (420) 46… (900) 48… (500) 6.0 x 15.0 (16.5) x 18.5 1.2 44… (2000) 42… (1000) 46… (800) 48… (450) 1000 1100 ..YYY 102 1200 112 122 1300 6.5 x 15.5 (17.0) x 18.5 1.3 44… (1500) 42… (900) 46… (750) 48… (400) 132 1500 7.0 x 16.0 (17.5) x 18.5 1.4 44… (1500) 42… (800) 46… (700) 48… (400) 152 7.5 x 16.5 (18.0) x 18.5 1.5 44… (1250) 42… (800) 46… (650) 48… (350) 42… (750) 46… (600) 48… (350) 202 1600 1800 162 182 2000 8.0 x 17.0 (18.5) x 18.5 1.6 44… (1250) 2200 8.5 x 17.5 (19.0) x 18.5 1.7 44… (1000) 42… (700) 46… (550) 48… (300) 222 2400 9.0 x 18.0 (19.5) x 18.5 1.8 44… (1000) 42… (650) 46… (550) 48… (300) 242 2700 9.5 x 18.5 (20.0) x 18.5 2.0 44… (900) 42… (600) 46… (500) 48… (300) 272 C (μF) PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm PITCH = 22.5 mm PITCH = 7.5 mm (BENT BACK) 302 0.003 0.0033 0.0036 6.0 x 19.0 x 26.0 2.1 332 44… (800) 362 0.0039 0.0043 0.0047 0.0051 0.0056 392 6.5 x 19.5 x 26.0 2.3 44… (750) 432 7.0 x 20.0 x 26.0 2.6 44… (650) 512 472 562 - - - 7.5 x 20.5 x 26.0 2.8 44… (600) 8.0 x 21.0 x 26.0 3.0 44… (550) 0.0082 8.5 x 21.5 x 26.0 3.3 44… (500) 822 0.0091 9.0 x 22.0 x 26.0 3.6 44… (450) 912 0.01 9.5 x 22.5 x 26.0 3.8 44… (400) 103 0.0062 0.0068 0.0075 Revision: 10-Aug-15 622 682 752 Document Number: 28127 16 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING LOOSE IN BOX C DIMENSIONS w x h (h’) x l (mm) MASS (g) (1) LEADS 5 mm ± 1.0 mm REEL ORIGINAL PITCH PITCH = 7.5 mm (BENT BACK) Ø 500 mm Ø 500 mm Ø 356 mm XX (SPQ) XX (SPQ) XX (SPQ) XX (SPQ) C (μF) C VALUE PITCH = 27.5 mm ± 0.5 mm; dt = 0.80 mm ± 0.08 mm PITCH = 27.5 mm ..YYY PITCH = 7.5 mm (BENT BACK) 0.011 9.0 x 22.0 x 30.0 3.8 44… (550) 0.012 9.5 x 22.5 x 30.0 4.1 44… (500) 123 0.013 10.0 x 23.0 x 30.0 4.4 44… (500) 133 0.015 10.5 x 23.5 x 30.0 4.9 44… (450) 113 153 - - - 0.016 11.0 x 24.0 x 30.0 5.1 44… (400) 0.018 11.5 x 24.5 x 30.0 5.6 44… (400) 183 0.02 12.5 x 25.5 x 30.0 6.1 44… (350) 203 0.022 13.0 x 26.0 x 30.0 6.5 44… (300) 223 163 Notes • Loose in box, all lengths have same SPQ • SPQ = Standard Packing Quantity (1) Net weight for short lead product only URDC = 2000 V; URAC = 600 V; UPP = 1700 V (LOCK LEAD) CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING C DIMENSIONS w x h (h’) x l (mm) LOOSE IN BOX MASS (g) (1) It = 4.0 mm + 1.0 mm/- 0.5 mm (SPQ) C (pF) PITCH = 15.0 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm 100 0.75 90483 110 0.75 90484 120 0.75 90485 130 0.75 90486 150 0.75 90487 160 0.75 90488 180 0.75 90489 200 0.75 90491 220 0.75 90276 0.75 90492 270 0.75 90493 300 0.75 90494 330 0.75 90495 360 0.75 90496 390 0.75 90188 430 0.75 90497 470 0.80 90498 510 0.80 90499 560 0.80 90501 240 5.5 x 17.5 x 18.5 Revision: 10-Aug-15 (2000) Document Number: 28127 17 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents CATALOG NUMBER BFC2 375 XXYYY AND PACKAGING C DIMENSIONS w x h (h’) x l (mm) LOOSE IN BOX MASS (g) (1) It = 4.0 mm + 1.0 mm/- 0.5 mm (SPQ) C (pF) PITCH = 15.0 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm 620 680 0.85 6.0 x 18.0 x 18.5 750 90502 0.85 90229 0.90 90503 (2000) 820 6.5 x 18.5 x 18.5 0.95 90504 (1750) 910 5.5 x 17.5 x 18.5 1.1 90505 (2000) 6.0 x 18.0 x 18.5 1.3 1000 1100 90225 1200 90506 (2000) 90226 1300 6.5 x 18.5 x 18.5 1.3 90507 (1750) 1500 7.0 x 19.0 x 18.5 1.5 90266 (1500) 1600 90508 7.5 x 19.5 x 18.5 1.7 2000 8.0 x 20.0 x 18.5 1.7 90509 (1250) 2200 8.5 x 20.5 x 18.5 2.3 90227 (1200) 2400 9.0 x 21.0 x 18.5 1.8 90511 (1100) 2700 9.5 x 21.5 x 18.5 2.7 90228 (1000) 1800 0.003 0.0036 90512 6.0 x 22.0 x 26.0 2.2 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 (1400) PITCH = 22.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm C (μF) 0.0033 90237 90162 90163 (750) 90164 6.5 x 22.5 x 26.0 2.4 7.0 x 23.0 x 26.0 2.6 7.5 x 23.5 x 26.0 2.8 90165 90166 90167 90168 90169 90171 (700) (600) (550) 8.0 x 24.0 x 26.0 3.0 0.0082 8.5 x 24.5 x 26.0 3.2 90173 (450) 0.0091 9.0 x 25.0 x 26.0 3.5 90174 (450) 0.01 9.5 x 25.5 x 26.0 3.8 90175 (400) 0.0075 90172 (500) PITCH = 27.5 mm ± 1.0 mm; dt = 0.80 mm ± 0.08 mm C (μF) 0.011 9.0 x 25.0 x 30.0 4.4 90176 (450) 0.012 9.5 x 25.5 x 30.0 4.6 90177 (450) 0.013 10.0 x 26.0 x 30.0 5.0 90178 (400) 0.015 10.5 x 26.5 x 30.0 5.4 90179 (350) 0.016 11.0 x 27.0 x 30.0 5.8 90181 (350) 0.018 11.5 x 27.5 x 30.0 6.2 90182 (350) 0.02 12.5 x 28.5 x 30.0 6.1 90513 (300) 0.022 13.0 x 29.0 x 30.0 6.5 90514 (250) Notes • SPQ = Standard Packing Quantity (1) Net weight for short lead product only Revision: 10-Aug-15 Document Number: 28127 18 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to “Packaging information” www.vishay.com/doc?28139 or end of catalog. Specific Method of Mounting to Withstand Vibration and Shock • For pitches 15 mm capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped Storage Temperature Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 10-Aug-15 Document Number: 28127 19 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents CHARACTERISTICS 103 1.5 Impedance (Ω) ΔC/C (%) 8 nF ;1 60 3 0V 12 .9 n F -2 nF ; 1 00 ; 1 00 33 0V 0 0 47 nF; 00 V -2 50 10 nF 63 V 0V 0n ;1 0 V F; 00 63 0V 0V 102 4 max. 101 0 typical 100 -4 min. -8 -50 0 50 Tamb (°C) 100 10-1 10-2 104 Capacitance as a function of ambient temperature (typical curve) 105 106 107 108 f (Hz) 109 Impedance as a function of frequency (typical curve) 16 ΔT (°C) Factor 1.2 1.0 12 0.8 8 0.6 0.4 4 0.2 0 0.0 -60 -20 20 60 Tamb (°C) 100 Maximum DC voltage as a function of temperature Revision: 10-Aug-15 -60 -20 20 60 T 100 amb (°C) Maximum allowed component temperature rise as a function of ambient temperature Document Number: 28127 20 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com 103 AC voltage (V) 102 102 nF F 1.0 n 2.2 .7 nF 4 nF 10 nF F 47 00 n nF 1 20 2 Tamb ≤ 85 °C, 630 VDC 101 103 4 10 5 10 10 6 7 10 f (Hz) 10 8 85 °C < Tamb ≤ 105 °C, 630 VDC 101 3 104 10 105 AC voltage (V) 102 102 10 4 10 5 10 6 10 7 8 f (Hz) 10 85 °C < Tamb ≤ 105 °C, 1000 VDC 101 3 104 10 105 103 AC voltage (V) 102 102 nF 1.0 nF F 4.7 2.2 n nF F 10 22 n F n 47 10 4 10 5 10 6 10 7 Revision: 10-Aug-15 8 f (Hz) 10 Max. RMS voltage (sinewave) as a function of frequency 107 f (Hz) 108 nF 1.0 7 nFnF 4. 2.2 nF 10 2 nF 2 nF 47 103 Tamb ≤ 85 °C, 1600 VDC 106 Max. RMS voltage (sinewave) as a function of frequency AC voltage (V) Max. RMS voltage (sinewave) as a function of frequency 101 103 107 f (Hz) 108 F 0p F 10 0 p F 22 70 p F 4 0n 1. nF 2.2 nF 4.7 nF 22 7 nFnF 4 0 10 103 F 0p F 10 20 p pF 2 0 F n 47 1.0 .2 nF 2 nF 4.7 nF 22 nFnF 4700 1 103 Tamb ≤ 85 °C, 1000 VDC 106 Max. RMS voltage (sinewave) as a function of frequency AC voltage (V) Max. RMS voltage (sinewave) as a function of frequency 101 103 nF F 1.0 .2 n F 2 n 4.7 nF 10 nF 47 0 nF F 10 20 n 2 103 AC voltage (V) Vishay BCcomponents 101 103 85 °C < Tamb ≤ 105 °C, 1600 VDC 104 105 106 107 f (Hz) 108 Max. RMS voltage (sinewave) as a function of frequency Document Number: 28127 21 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com 103 AC voltage (V) 102 102 nF nF F 0.1 22 n nF 0. .47 0 nF F 2.2 10 n nF F 4.7 22 n 1.0 nF F 0.1 2 n nF 0.2 nF 7 F 2.2 0.4 .0 n 1 nF nF 4.7 10 nF 22 103 AC voltage (V) Vishay BCcomponents Tamb ≤ 85 °C, 2000 VDC 101 103 104 105 106 101 103 107 f (Hz) 108 85 °C < Tamb ≤ 105 °C, 2000 VDC 104 105 106 107 f (Hz) 108 Max. RMS voltage (sinewave) as a function of frequency 102 102 Dissipation factor (x 10-4) Dissipation factor (x 10-4) Max. RMS voltage (sinewave) as a function of frequency 3 2 1 101 3 2 1 101 100 102 103 104 105 f (Hz) 100 102 106 103 104 105 f (Hz) 106 1. KP/MPK 10.0 mm and 15 mm pitch all versions 22.5 mm pitch, 1000 V, 1600 V, 2000 V and 2500 V versions 2. KP/MPK 22.5 mm pitch, 630 V versions 27.5 mm pitch, 1000 V, 1600 V and 2000 V versions 3. KP/MPK 27.5 mm pitch, 630 V versions 1. KP/MPK 10.0 mm and 15 mm pitch all versions 22.5 mm pitch, 1000 V, 1600 V, 2000 V and 2500 V versions 2. KP/MPK 22.5 mm pitch, 630 V versions 27.5 mm pitch, 1000 V, 1600 V and 2000 V versions 3. KP/MPK 27.5 mm pitch, 630 V versions Maximum curves Tangent of loss angle (typical curve) RC (s) 106 105 104 0 20 40 60 80 100 120 Tamb (°C) Insulation resistance as a function of ambient temperature Revision: 10-Aug-15 Document Number: 28127 22 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents HEAT CONDUCTIVITY (G) AS A FUNCTION OF (ORIGINAL) PITCH AND CAPACITOR BODY THICKNESS IN mW/°C HEAT CONDUCTIVITY (mW/°C) Wmax. (mm) PITCH 10 mm PITCH 15 mm PITCH 22.5 mm PITCH 27.5 mm 4.0 4.0 5.0 - - 4.5 4.5 6.0 - - 5.0 5.0 6.0 12.0 13.0 5.5 6.0 6.5 13.0 15.0 6.0 6.0 6.5 13.0 15.0 6.5 6.5 8.0 15.0 17.0 7.0 - 8.0 15.0 17.0 7.5 - 9.0 17.0 18.0 8.0 - 9.0 17.0 20.0 8.5 - 11.0 18.0 20.0 9.0 - 11.0 18.0 22.0 9.5 - 12.0 20.0 22.0 10.0 - 12.0 20.0 23.0 10.5 - - 22.0 25.0 11.0 - - 22.0 25.0 11.5 - - 23.0 27.0 12.0 - - - 27.0 12.5 - - - 30.0 13.0 - - - 30.0 13.5 - - - 30.0 14.0 - - - 30.0 14.5 - - - 33.0 15.0 - - - 33.0 15.5 - - - 37.0 16.0 - - - 37.0 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free ambient temperature. The power dissipation can be calculated according type detail specification “HQN-384-01/101: Technical Information Film Capacitors” The component temperature rise (T) can be measured (see section “Measuring the component temperature” for more details) or calculated by T = P/G: • T = component temperature rise (°C) • P = power dissipation of the component (mW) • G = heat conductivity of the component (mW/°C) Revision: 10-Aug-15 Document Number: 28127 23 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents MEASURING THE COMPONENT TEMPERATURE A thermocouple must be attached to the capacitor body as in: Thermocouple The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC). The temperature rise is given by T = TC - Tamb. To avoid radiation or convection, the capacitor should be tested in a wind-free box. APPLICATION NOTE AND LIMITING CONDITIONS To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (UP) shall not be greater than the rated DC voltage (URDC). 2. The peak-to-peak voltage (UPP) shall not be greater than the maximum (Up-p) to avoid the ionization inception level. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: T 2 dU dU 2 x ------- x dt U RDC x ------- dt dt rated 0 T is the pulse duration. 4. The maximum component surface temperature rise must be lower than the limits. Example C = 10 nF 1600 V, KP/MPK This is a signal as in the drawing below UP-P = 1200 V; UP = 1100 V; T1 = 12 μs; T2 = 64 μs The ambient temperature is 50 °C Checking conditions: 1. The peak voltage UP = 1100 V is lower than 1600 VDC 2. The peak-to-peak voltage 1200 V is lower than 202 x 550 VAC = 1414 UP-P 3. The voltage pulse slope (dU/dt) = 320 V is much lower than 7000 V/μs 4. The dissipated power is 170 mW as calculated with fourier terms This gives a temperature rise of 170 mW/(17 mW/°C) = 10 °C which is allowed according Fig. “Max. allowed temperature rise as a function of ambient temperature” for an ambient temperature of 50 °C _width) Voltage UP UP-P Time T1 T2 Revision: 10-Aug-15 Document Number: 28127 24 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-17 and Specific Reference Data”. Group C Inspection Requirements SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapters “General Data” of this specification 4.3.1 Initial measurements Capacitance Tangent of loss angle at 100 kHz 4.3 Robustness of terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90° 4.4 Resistance to soldering heat Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s 4.14 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C| 1 % + 5 pF of the value measured initially Tangent of loss angle Increase of tan : 0.0005 Compared to values measured in 4.3.1 No visible damage SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.6.1 Initial measurements Capacitance Tangent of loss angle at 100 kHz 4.15 Solvent resistance of the marking Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 min ± 0.5 min 4.6 Rapid change of temperature A = -55 °C B = +105 °C 5 cycles Duration t = 30 min 4.7 Vibration Visual examination Mounting: See section “Mounting” of this specification Procedure B4 Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s2 (whichever is less severe) Total duration 6 h Revision: 10-Aug-15 No visible damage Legible marking No visible damage Document Number: 28127 25 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com Vishay BCcomponents SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 4.7.2 Final inspection Visual examination No visible damage 4.9 Shock Mounting: see section “Mounting” of this specification Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms 4.9.3 Final measurements Visual examination No visible damage Capacitance For C > 0.027μF: |C/C| 2 % or for C 0.027μF: |C/C| 3 % + 5 pF of the value measured in 4.6.1. Tangent of loss angle Increase of tan : 0.0005 Compared to values measured in 4.6.1 Insulation resistance As specified in chapter “General data” of this specification SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.10 Climatic sequence 4.10.2 Dry heat 4.10.3 Damp heat cyclic Test Db, first cycle 4.10.4 Cold 4.10.6 Damp heat cyclic Test Db, remaining cycles 4.10.6.2 Final measurements Revision: 10-Aug-15 Temperature: +105 °C Duration: 16 h Temperature: -55 °C Duration: 2 h Voltage proof = URDC for 1 min within 15 min after removal from testchamber No breakdown of flash-over Visual examination No visible damage Legible marking Capacitance |C/C| 3 % of the value measured in 4.4.2 or 4.9.3 Tangent of loss angle Increase of tan : 0.001 Compared to values measured in 4.3.1 or 4.6.1 Insulation resistance 50 % of values specified in chapters “General data” of this specification Document Number: 28127 26 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 KP/MKP 375 www.vishay.com SUB-CLAUSE NUMBER AND TEST SUB-GROUP C2 4.11 Damp heat steady state Vishay BCcomponents CONDITIONS PERFORMANCE REQUIREMENTS 56 days, 40 °C, 90 % to 95 % RH 4.11.1 Initial measurements Capacitance Tangent of loss angle at 1 kHz 4.11.3 Final measurements Voltage proof = URDC for 1 min within 15 min after removal from testchamber No breakdown of flash-over Visual examination No visible damage Legible marking Capacitance |C/C| 1 % + 5 pF of the value measured in 4.11.1. Tangent of loss angle Increase of tan 0.0005 Compared to values measured in 4.11.1 Insulation resistance 50 % of values specified in section “Insulation Resistance” of this specification SUB GROUP C3 4.12.1 Endurance Duration: 2000 h Temperature: 85 °C Voltage: 1.25 x max. URDC VRMS, 50 Hz Duration: 2000 h Temperature: 105 °C 4.12.1.1 Initial measurements Voltage: 0.875 x max. URDC VRMS, 50 Hz Capacitance Tangent of loss angle at 100 kHz 4.12.1.3 Final measurements Visual examination No visible damage Legible marking Temperature: 85 °C Capacitance For C > 0.056 μF: |C/C| 2 % + 5 pF or for C > 0.056 μF: |C/C| 3 % + 5 pF of the value measured in 4.12.1.1 Temperature: 105 °C |C/C| 5 % + 5 pF Tangent of loss angle Increase of tan : 0.001 Compared to values measured in 4.12.1 Insulation resistance 50 % of values specified in chapters “General data” of this specification Capacitance As specified in section “Capacitance” of this specification Insulation resistance As specified in chapters “General data” of this specification SUB-GROUP C4 4.2.6 Temperature characteristics Revision: 10-Aug-15 Document Number: 28127 27 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000