VISHAY MMKP383

MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film Capacitors
MMKP Radial Potted Type
168x12(halfpage)
l
w
FEATURES
w
l
h
h h'
F'
(1)
F
lt
P
¯dt
H
¯dt
7.5 mm bent back pitch. 15 mm to 27.5 mm lead
pitch. Low contact resistance. Low loss dielectric.
Small dimensions for high density packaging.
Supplied loose in box and taped on reel
RoHS-compliant product
10
ENCAPSULATION
15
Dimensions in mm
(1) ⎪F - F’⎪ < 0.3 mm
F = 7.5 + 0.6/- 0.1 mm
Plastic case, epoxy resin sealed, flame retardant
UL-class 94 V-0
CLIMATIC CATEGORY
55/105/56
APPLICATIONS
Where steep pulses occur e.g. SMPS (switch mode power
supplies). Electronic lighting e.g. Ballast. Motor control
circuits. S-correction. For flyback applications please use
1400 V series.
CAPACITANCE RANGE (E24 SERIES)
0.001 to 2.7 µF
CAPACITANCE TOLERANCE
REFERENCE SPECIFICATIONS
±5%
IEC 60384-17
LEADS
MARKING
Tinned wire
C-value; tolerance; rated voltage; sub-class; manufacturer’s
type; code for dielectric material; code for factory of origin;
manufacturer; year and week of manufacture
RATED (DC) TEMPERATURE
85 °C
DIELECTRIC
RATED (AC) TEMPERATURE
Polypropylene film
105 °C
ELECTRODES
MAXIMUM APPLICATION TEMPERATURE
Metallized
105 °C
ENCAPSULATION
DETAIL SPECIFICATION
Flame retardant plastic case and epoxy resin
CONSTRUCTION
For more detailed data and test requirements contact:
[email protected]
Internal serial construction
RATED (DC) VOLTAGE
250 V; 400 V; 630 V; 1000 V; 1400 V;1600 V; 2000 V;
2500 V
RATED (AC) VOLTAGE
125 V; 200 V; 220 V; 350 V; 500 V; 550 V; 700 V; 900 V
RATED PEAK-TO-PEAK VOLTAGE
350 V; 560 V; 630 V; 1000 V; 1400 V; 1600 V; 2000 V;
2500 V
Document Number: 28124
Revision: 05-Nov-08
For technical questions, contact: [email protected]
www.vishay.com
1
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film
Capacitors MMKP Radial Potted Type
COMPOSITION OF CATALOG NUMBER
TYPE AND PITCHES
15.0 mm/7.5 mm
383
MULTIPLIER
(nF)
CAPACITANCE
(numerically)
22.5 mm
27.5 mm
BFC2
2222(1)
(1) Old
TYPE
383
0.1
2
1
3
Example:
10
4
104 = 10 x 10 = 100 nF
100
5
1600 V
2000 V
2500 V
50
53
60
63
70
-
15.0 mm
PACKAGING
383
383
XX YY Y
XX YY Y
ordering code
LEAD CONFIGURATION
Loose in box
Lead length 3.5 mm ± 0.3 mm
Taped on reel
H = 16.0 mm; P0 = 15.0 mm
(bent back to 7.5
reel diameter = 500 mm
mm) (1)
PREFERRED TYPES
C-TOL. 250 V
±5%
00
03
±5%
400 V
630 V
10
13
20
23
1000 V 1400 V
30
33
40
43
Dimensions of this code numbers stay between brackets
ON REQUEST
Loose in box
383
Taped on reel (1)
Taped on reel
(bent back to 7.5
mm) (1)
Taped on reel
(bent back to
10.0 mm) (1)
Lead length 5.0 mm ± 1.0
Lead length 25.0 mm ± 2.0
H = 18.5 mm; P0 = 12.7 mm
±5%
±5%
±5%
H = 16.0 mm; P0 = 15.0 mm
reel diameter = 356 mm
±5%
H = 16.0 mm; P0 = 15.0 mm
reel diameter = 500 mm
±5%
01
04
02
05
11
14
12
15
21
24
22
25
31
34
32
35
41
44
42
45
51
54
52
55
61
64
62
65
71
74
72
-
Dimensions of this code numbers stay between brackets
08
18
28
38
48
58
68
-
Notes
(1) For detailed tape specifications refer to “Packaging Information” www. vishay.com/doc?28139 or end of catalog
(2) SPQ = standard packaging quantity
SPECIFIC REFERENCE DATA (250 Vdc)
DESCRIPTION
Tangent of loss angle:
C ≤ 0.15 µF
0.15 µF < C ≤ 0.39 µF
0.39 µF < C ≤ 0.56 µF
0.56 µF < C ≤ 0.82 µF
0.82 µF < C ≤ 1.2 µF
1.2 µF < C ≤ 1.8 µF
1.8 µF < C ≤ 2.2 µF
2.2 µF < C ≤ 2.7 µF
Rated voltage pulse slope (dU/dt)R:
C ≤ 0.15 µF
0.15 µF < C ≤ 0.39 µF
0.39 µF < C ≤ 0.82 µF
0.82 µF < C ≤ 2 µF
2 µF < C ≤ 2.7 µF
R between leads, for C ≤ 1 µF at 100 V; 1 min
RC between leads, for C >1 µF at 100 V; 1 min
R between leads and case; 100 V; 1 min
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum application temperature
www.vishay.com
2
VALUE
at 10 kHz
≤ 5 x 10-4
≤ 5 x 10-4
≤ 10 x 10-4
≤ 10 x 10-4
≤ 10 x 10-4
≤ 10 x 10-4
≤ 15 x 10-4
≤ 15 x 10-4
For technical questions, contact: [email protected]
at 100 kHz
≤ 20 x 10-4
≤ 25 x 10-4
≤ 25 x 10-4
≤ 40 x 10-4
≤ 50 x 10-4
≤ 65 x 10-4
≤ 75 x 10-4
≤ 85 x 10-4
450 V/µs
900 V/µs
290 V/µs
190 V/µs
130 V/µs
> 100 000 MΩ
> 100 000 s
> 30 000 MΩ
> 220 V
400 V; 1 min
2840 V; 1 min
105 °C
Document Number: 28124
Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene
Film Capacitors MMKP Radial Potted Type
Vishay BCcomponents
URdc = 250 V; URac = 125 V; Upp = 350 V; C-tol. = ± 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
DIMENSIONS
MASS
C
Pitch
= 7.5 mm (bent back)
Leads
Leads
w x h (h’) x l
(g) (1) 3.5 ± 0.3 mm 25.0 ± 2.0 mm Original pitch
(µF)
Ø
500
mm
Ø 356 mm
(mm)
XX
XX
XX
XX
XX
(SPQ)
(SPQ)
(SPQ)
(SPQ)
(SPQ)
Pitch = 15 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
Pitch = 7.5 mm (bent back)
Pitch = 15 mm
0.082
00…
04…
02…
03…
05…
5.0 x 11.0 (13.0) x 17.5
1.1
0.091
(1250)
(1000)
(1100)
(950)
(550)
0.1
0.11
00…
04…
02…
03…
05…
0.12
6.0 x 12.0 (14.0) x 17.5
1.4
(1000)
(1000)
(900)
(800)
(450)
0.13
0.15
0.16
00…
04…
02…
03…
05…
7.0 x 13.5 (15.5) x 17.5
1.8
0.18
(750)
(500)
(800)
(700)
(400)
0.2
0.22
00…
04…
02…
03…
05…
0.24
8.5 x 15.0 (17.0) x 17.5
2.6
(750)
(500)
(650)
(550)
(300)
0.27
0.3
0.33
00…
04…
02…
03…
05…
10.0 x 16.5 (18.5) x 17.5
3.3
0.36
(500)
(450)
(600)
(500)
(250)
0.39
Note
(1) Net weight for short lead products only
C-VALUE
..YYY
823
913
104
114
124
134
154
164
184
204
224
244
274
304
334
364
394
URdc = 250 V; URac = 125 V; Upp = 350 V; C-tol. = ± 5 %
C
(µF)
DIMENSIONS
wxhxl
(mm)
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
C-VALUE
Leads
Leads
Original pitch
3.5 ± 0.3 mm
25.0 ± 2.0 mm
..YYY
XX
XX
XX
(SPQ)
(SPQ)
(SPQ)
MASS
(g) (1)
Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
0.43
7.0 x 116.5 x 26.0
3.0
0.47
0.51
8.5 x 18.0 x 26.0
4.2
0.56
0.62
0.68
10.0 x 19.5 x 26.0
5.3
0.75
0.82
Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
0.91
1.0
11.0 x 21.0 x 31.0
8.0
1.1
1.2
1.3
13.0 x 23.0 x 31.0
9.7
1.5
1.6
1.8
15.0 x 25.0 x 31.0
12.6
2.0
2.2
16.3
2.4
18.0 x 28.0 x 31.0
2.7
Note
(1) Net weight for short lead products only
Document Number: 28124
Revision: 05-Nov-08
00…
(200)
04…
(250)
Pitch = 22.5 mm
02…
(550)
00…
(200)
04…
(250)
02…
(450)
00…
(200)
04…
(200)
02…
(350)
434
474
514
564
624
684
754
824
Pitch = 27.5 mm
00…
(750)
04…
(125)
00…
(500)
04…
(125)
00…
(100)
00…
(125)
00…
(100)
00…
(100)
For technical questions, contact: [email protected]
-
914
105
115
125
135
155
165
185
205
225
245
275
www.vishay.com
3
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film
Capacitors MMKP Radial Potted Type
SPECIFIC REFERENCE DATA (400 Vdc)
DESCRIPTION
Tangent of loss angle:
C ≤ 0.22 µF
0.22 µF < C ≤ 0.33 µF
0.33 µF < C ≤ 0.43 µF
0.43 µF < C ≤ 0.68 µF
0.68 µF < C ≤ 0.82 µF
0.82 µF < C ≤ 1.2 µF
1.2 µF < C ≤ 1.5 µF
Rated voltage pulse slope (dU/dt)R:
C ≤ 0.082 µF
0.082 µF < C ≤ 0.22 µF
0.22 µF < C ≤ 0.43 µF
0.42 µF < C ≤ 1.1 µF
1.1 µF < C ≤ 1.5 µF
R between leads, for C ≤ 1 µF at 100 V; 1 min
RC between leads, for C >1 µF at 100 V; 1 min
R between leads and case; 100 V; 1 min
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum aplication temperature
VALUE
at 10 kHz
≤ 5 x 10-4
≤ 10 x 10-4
≤ 10 x 10-4
≤ 10 x 10-4
≤ 10 x 10-4
≤ 10 x 10-4
≤ 10 x 10-4
at 100 kHz
≤ 20 x 10-4
≤ 35 x 10-4
≤ 40 x 10-4
≤ 50 x 10-4
≤ 55 x 10-4
≤ 60 x 10−4
≤ 65 x 10-4
600 V/µs
1200 V/µs
410 V/µs
260 V/µs
180 V/µs
> 100 000 MΩ
> 100 000 s
> 30 000 MΩ
> 220 V
560 V; 1 min
2840 V; 1 min
105 °C
URdc = 400 V; URac = 200 V; Upp = 560 V; C-tol. = ± 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
C-VALUE
DIMENSIONS
C
MASS
Pitch = 7.5 mm (bent back)
Leads
Leads
w x h (h’) x l
(µF)
(g) (1) 3.5 ± 0.3 mm 25.0 ± 2.0 mm Original pitch
Ø 500 mm
Ø 356 mm
(mm)
..YYY
XX
XX
XX
XX
XX
(SPQ)
(SPQ)
(SPQ)
(SPQ)
(SPQ)
Pitch = 15 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
Pitch = 15 mm Pitch = 7.5 mm (bent back)
0.047
473
10…
14…
12…
13…
15…
5.0 x 11.0 (13.0) x 17.5
1.1
0.051
513
(1250)
(1000)
(1100)
(950)
(550)
0.056
563
0.062
623
0.068
683
10…
14…
12…
13…
15…
6.0 x 12.0 (14.0) x 17.5
1.4
(1000)
(1000)
(900)
(800)
(450)
0.075
753
0.082
823
0.091
913
10…
14…
12…
13…
15…
7.0 x 13.5 (15.5) x 17.5
1.8
0.1
104
(750)
(500)
(800)
(700)
(400)
0.11
114
124
0.12
0.13
134
10…
14…
12…
13…
15…
8.5 x 15.0 (17.0) x 17.5
2.5
(750)
(500)
(650)
(550)
(300)
0.15
154
0.16
164
184
0.18
15…
10…
14…
12…
13…
10.0 x 16.5 (18.5) x 17.5
3.3
0.2
204
(500)
(250)
(500)
(450)
(600)
0.22
224
Note
(1) Net weight for short lead products only
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 28124
Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene
Film Capacitors MMKP Radial Potted Type
Vishay BCcomponents
URdc = 400 V; URac = 200 ; Up-p = 560 V; C-tol. = ± 5 %
C
(µF)
DIMENSIONS
wxhxl
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
C-VALUE
Leads
Leads
Original pitch
3.5 ± 0.3 mm 25.0 ± 2.0 mm
..YYY
XX
XX
XX
(SPQ)
(SPQ)
(SPQ)
Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
0.24
7.0 x 116.5 x 26.0
3.0
0.27
8.5 x 18.0 x 26.0
4.2
0.30
0.33
0.36
10.0 x 19.5 x 26.0
5.3
0.39
0.43
Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
0.47
0.51
11.0 x 21.0 x 31.0
8.0
0.56
0.62
0.68
13.0 x 23.0 x 31.0
9.7
0.75
0.82
0.91
15.0 x 25.0 x 31.0
12.6
1.
1.1
1.2
18.0 x 28.0 x 31.0
1.3
16.3
1.5
Note
(1) Net weight for short lead products only
10…
(200)
14…
(250)
Pitch = 22.5 mm
12…
(550)
10…
(200)
14…
(250)
12…
(450)
10…
(200)
14…
(200)
12…
(350)
244
274
304
334
364
394
434
Pitch = 27.5 mm
10…
(100)
14…
(125)
10…
(100)
14…
(125)
10…
(100)
14…
(125)
10…
(100)
14…
(100)
-
-
474
514
564
624
684
754
824
914
105
115
125
135
155
SPECIFIC REFERENCE DATA (630 Vdc)
DESCRIPTION
Tangent of loss angle:
C ≤ 0.15 µF
0.15 µF < C ≤ 0.22 µF
0.22 µF < C ≤ 0.3 µF
0.3 µF < C ≤ 0.47 µF
0.47 µF < C ≤ 0.68 µF
0.68 µF < C ≤ 1.0 µF
Rated voltage pulse slope (dU/dt)R:
C ≤ 0.024 µF
0.024 µF < C ≤ 0.062 µF
0.062 µF < C ≤ 0.13 µF
0.13 µF < C ≤ 0.33 µF
0.33 µF < C ≤ 0.47 µF
R between leads, for C ≤ 1 µF at 100 V; 1 min
R between leads and case; 100 V; 1 min
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum application temperature
Document Number: 28124
Revision: 05-Nov-08
VALUE
at 10 kHz
≤ 5 x 10-4
≤ 8 x 10-4
≤ 8 x 10-4
≤ 10 x 10-4
≤ 10 x 10-4
≤ 10 x 10-4
For technical questions, contact: [email protected]
at 100 kHz
≤ 15 x 10-4
≤ 25 x 10-4
≤ 30 x 10-4
≤ 40 x 10-4
≤ 45 x 10-4
≤ 50 x 10-4
1700 V/µs
3300 V/µs
1200 V/µs
700 V/µs
470 V/µs
> 100 000 MΩ
> 30 000 MΩ
> 440 V
1600 V; 1 min
2840 V; 1 min
105 °C
www.vishay.com
5
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film
Capacitors MMKP Radial Potted Type
URdc = 630 V; URac = 220 V; Up-p = 630 V; C-tol. = ± 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
C-VALUE
DIMENSIONS
C
MASS
Pitch
=
7.5
mm
(bent
back)
Leads
Leads
w x h (h’) x l
Original pitch
(g) (1)
(µF)
3.5 ± 0.3 mm 25.0 ± 2.0 mm
Ø 500 mm
Ø 356 mm
(mm)
..YYY
XX
XX
XX
XX
XX
(SPQ)
(SPQ)
(SPQ)
(SPQ)
(SPQ)
Pitch = 15 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
Pitch = 15 mm Pitch = 7.5 mm (bent back)
0.03
303
20…
24…
22…
23…
25…
5.0 x 11.0 (13.0) x 17.5
1.1
0.033
333
(1250)
(1000)
(2200)
(950)
(550)
0.036
363
393
0.039
0.043
433
20…
24…
22…
23…
25…
6.0 x 12.0 (14.0) x 17.5
1.4
0.047
473
(1000)
(1000)
(900)
(800)
(450)
0.051
513
0.056
563
0.062
623
20…
24…
22…
23…
25…
7.0 x 13.5 (15.5) x 17.5
1.8
0.068
683
(750)
(500)
(800)
(700)
(400)
0.075
753
0.082
823
0.091
913
20…
24…
22…
23…
25…
8.5 x 15.0 (17.0) x 17.5
2.5
(750)
(500)
(650)
(550)
(300)
0.1
104
0.11
114
124
0.12
23…
25…
20…
24…
22…
10.0 x 16.5 (18.5) x 17.5
3.3
0.13
134
(600)
(500)
(250)
(500)
(450)
0.15
154
Pitch = 22.5 mm
Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
164
0.16
0.18
184
20…
24…
22…
8.5 x 18.0 x 26.0
4.2
(200)
(250)
(450)
0.2
204
0.22
224
174
0.24
24…
22…
20…
10.0 x 19.5 x 26.0
5.3
0.27
304
(200)
(200)
(350)
0.3
Pitch = 27.5 mm
Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
334
0.33
0.36
364
20…
24…
11.0 x 21.0 x 31.0
8.0
(750)
(125)
0.39
394
0.43
434
474
0.47
20…
24…
13.0 x 23.0 x 31.0
9.7
0.51
514
(500)
(125)
0.56
564
0.62
20…
24…
624
(100)
(125)
15.0 x 25.0 x 31.0
12.6
0.68
684
0.75
754
824
0.82
20…
24…
18.0 x 28.0 x 31.0
16.3
0.91
914
(100)
(100)
1.0
105
Note
(1) Net weight for short lead products only
www.vishay.com
6
For technical questions, contact: [email protected]
Document Number: 28124
Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene
Film Capacitors MMKP Radial Potted Type
Vishay BCcomponents
SPECIFIC REFERENCE DATA (1000 Vdc)
DESCRIPTION
Tangent of loss angle:
C ≤ 0.062 µF
0.062 µF < C ≤ 0.13 µF
0.13 µF < C ≤ 0.22 µF
0.22 µF < C ≤ 0.33 µF
0.33 µF < C ≤ 0.47 µF
Rated voltage pulse slope (dU/dt)R:
C ≤ 0.024 µF
0.024 µF < C ≤ 0.062 µF
0.062 µF < C ≤ 0.13 µF
0.13 µF < C ≤ 0.33 µF
0.33 µF < C ≤ 0.47 µF
R between leads, for C ≤ 1 µF at 500 V; 1 min
R between leads and case; 500 V; 1 min
Ionization (AC) voltage (typical value) at 50 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum aplication temperature
VALUE
at 10 kHz
≤ 5 x 10-4
≤ 6 x 10-4
≤ 8 x 10-4
≤ 8 x 10-4
≤ 8x 10-4
at 100 kHz
≤ 15 x 10-4
≤ 20 x 10-4
≤ 25 x 10-4
≤ 30 x 10-4
≤ 35 x 10-4
1700 V/µs
3300 V/µs
1200 V/µs
700 V/µs
470 V/µs
> 100 000 MΩ
> 30 000 MΩ
> 440 V
1600 V; 1 min
2840 V; 1 min
105 °C
URdc = 1000 V; URac = 350 V; Up-p = 1000 V; C-tol. = ± 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
C-VALUE
DIMENSIONS
MASS
C
Pitch = 7.5 mm (bent back)
Leads
Leads
w x h (h’) x l
(g) (1) 3.5 ± 0.3 mm 25.0 ± 2.0 mm Original pitch
(µF)
Ø 500 mm
Ø 356 mm
(mm)
..YYY
XX
XX
XX
XX
XX
(SPQ)
(SPQ)
(SPQ)
(SPQ)
(SPQ)
Pitch = 15 mm Pitch = 7.5 mm (bent back)
Pitch = 15 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
0.0043
432
0.0047
472
0.0051
512
0.0056
562
0.0062
622
0.0068
682
0.0075
752
30…
34…
32…
33…
35…
5.0 x 11.0 (13.0) x 17.5
1.1
0.0082
822
(1250)
(1000)
(1100)
(950)
(550)
0.0091
912
0.01
103
0.011
113
0.012
123
0.013
133
0.015
153
0.016
163
183
0.018
30…
34…
32…
33…
35…
0.02
203
6.0 x 12.0 (14.0) x 17.5
1.4
(1000)
(1000)
(900)
(800)
(450)
0.022
223
0.024
243
0.027
273
30…
34…
32…
33…
35…
7.0 x 13.5 (15.5) x 17.5
1.8
0.030
303
(750)
(500)
(800)
(700)
(400)
0.033
333
363
0.036
35…
30…
34…
32…
33…
0.039
393
8.5 x 15.0 (17.0) x 17.5
2.5
(550)
(300)
(750)
(500)
(650)
0.043
433
0.047
473
0.051
513
30…
34…
32…
33…
35…
10.0 x 16.5 (18.5) x 17.5
3.3
0.056
563
(500)
(450)
(600)
(500)
(250)
0.062
623
Document Number: 28124
Revision: 05-Nov-08
For technical questions, contact: [email protected]
www.vishay.com
7
MMKP 383
Vishay BCcomponents
C
(µF)
DIMENSIONS
w x h (h’) x l
(mm)
AC and Pulse Double Metallized Polypropylene Film
Capacitors MMKP Radial Potted Type
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
MASS
Leads
Leads
(g) (1) 3.5 ± 0.3 mm 25.0 ± 2.0 mm
Original pitch
XX
(SPQ)
XX
(SPQ)
30 ...
(200)
34…
(250)
XX
(SPQ)
Pitch 22.5 mm
32…
(550)
30…
(200)
34…
(250)
32…
(450)
30…
(200)
34…
(200)
32…
(350)
Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
0.068
7.0 x 16.5 x 26.5
3.0
0.075
8.5 x 18.0 x 26.0
4.2
0.082
0.091
0.1
0.11
10.0 x 19.5 x 26.0
5.3
0.12
0.13
Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
0.15
11.0 x 21.0 x 31.0
8.0
0.16
0.18
0.2
13.0 x 23.0 x 31.0
9.7
0.22
0.24
0.27
15.0 x 25.0 x 31.0
12.6
0.3
0.33
0.36
0.39
18.0 x 28.0 x 31.0
16.3
0.43
0.47
Note
(1) Net weight for short lead products only
C-VALUE
..YYY
683
753
823
913
104
114
124
134
Pitch = 27.5 mm
30…
(100)
34…
(125)
30…
(100)
34…
(125)
30…
(100)
34…
(125)
30…
(100)
34…
(100)
154
164
184
204
224
244
274
304
334
364
394
434
474
-
SPECIFIC REFERENCE DATA (1400 Vdc)
DESCRIPTION
Tangent of loss angle:
C ≤ 0.016 µF
0.016 µF < C ≤ 0.039 µF
0.039 µF < C ≤ 0.13 µF
Rated voltage pulse slope (dU/dt)R:
C ≤ 0.0056 µF
0.0056µF < C ≤ 0.016 µF
0.016 µF < C ≤ 0.039 µF
0.039 µF < C ≤ 0.1 µF
0.1 µF < C ≤ 0.13 µF
R between leads, for C ≤ 1 µF at 500 V; 1 min
R between leads and case; 500 V; 1 min
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum aplication temperature
www.vishay.com
8
VALUE
at 10 kHz
≤ 5 x 10-4
≤ 5 x 10-4
≤ 5 x 10-4
For technical questions, contact: [email protected]
at 100 kHz
≤ 10 x 10-4
≤ 15 x 10-4
≤ 20 x 10-4
8000 V/µs
15 000 V/µs
4000 V/µs
2100 V/µs
1500 V/µs
> 100 000 MΩ
> 30 000 MΩ
> 500 V
2250 V; 1 min
2840 V; 1 min
105 °C
Document Number: 28124
Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene
Film Capacitors MMKP Radial Potted Type
Vishay BCcomponents
URdc = 1400 V; URac = 500 V; Up-p = 1400 V; C-tol. = ± 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
C-VALUE
DIMENSIONS
MASS
C
Pitch
=
7.5
mm
(bent
back)
Leads
Leads
w x h (h’) x l
(g) (1) 3.5 ± 0.3 mm 25.0 ± 2.0 mm Original pitch
(µF)
Ø 500 mm
Ø 356 mm
(mm)
..YYY
XX
XX
XX
XX
XX
(SPQ)
(SPQ)
(SPQ)
(SPQ)
(SPQ)
Pitch = 15 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
Pitch = 15 mm Pitch = 7.5 mm (bent back)
222
0.0022
0.0024
242
0.0027
272
40…
44…
42…
43…
45…
5.0 x 11.0 (13.0) x 17.5
0.003
1.1
302
(1250)
(1000)
(1100)
(950)
(550)
0.0033
332
0.0036
362
0.0039
392
0.0043
432
0.0047
40…
44…
42…
43…
45…
472
6.0 x 12.0 (14.0) x 17.5
1.4
(1000)
(1000)
(900)
(800)
(450)
0.0051
512
0.0056
562
0.0062
622
0.0068
40…
44…
42…
43…
45…
682
7.0 x 13.5 (15.5) x 17.5
1.8
(750)
(500)
(800)
(700)
(400)
0.0075
752
0.0082
822
0.0091
912
0.01
40…
44…
42…
43…
45…
103
8.5 x 15.0 (17.0) x 17.5
2.5
(750)
(500)
(650)
(550)
(300)
0.011
113
0.012
123
133
0.013
45…
40…
44…
42…
43…
10.0 x 16.5 (18.5) x 17.5
3.3
0.015
153
(500)
(250)
(500)
(450)
(600)
0.016
163
Pitch = 22.5 mm
Pitch = 22.5 ±0.4 mm; dt= 0.80 ±0.08 mm
183
0.018
40…
44…
42…
7.0 x 16.5 x 26.0
3
(200)
(250)
(550)
0.02
203
223
0.022
40…
44…
42…
8.5 x 18.0 x 26.0
4.2
0.024
243
(200)
(250)
(450)
0.027
273
303
0.03
0.033
333
40…
44…
42…
10.0 x 19.5 x 26.0
5.3
(200)
(200)
(350)
0.036
363
0.039
393
Pitch = 27.5 mm
Pitch = 27.5 ± 0.4 mm; dt= 0.80 ± 0.08 mm
0.043
433
0.047
40…
44…
473
11.0 x 21.0 x 31.0
8
0.051
513
0.056
563
623
0.062
40…
44…
13.0 x 23.0 x 31.0
9.7
0.068
683
(100)
(125)
0.075
753
823
0.082
40…
44…
15.0 x 25.0 x 31.0
12.6
0.091
913
(100)
(125)
0.1
104
114
0.11
40…
44…
18.0 x 28.0 x 31.0
16.3
0.12
124
(100)
(100)
0.13
134
Note
(1) Net weight for short lead products only
Document Number: 28124
Revision: 05-Nov-08
For technical questions, contact: [email protected]
www.vishay.com
9
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film
Capacitors MMKP Radial Potted Type
SPECIFIC REFERENCE DATA (1600 Vdc)
DESCRIPTION
Tangent of loss angle:
C ≤ 0.015 µF
0.015 µF < C ≤ 0.15 µF
Rated voltage pulse slope (dU/dt)R:
C ≤ 0.0056 µF
0.0056 µF < C ≤ 0.0075 µF
0.0075 µF < C ≤ 0.039 µF
0.039 µF < C ≤ 0.1 µF
0.1 µF < C ≤ 0.15 µF
R between leads, for C ≤ 1 µF at 500 V; 1 min
R between leads and case; 500 V; 1 min
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum aplication temperature
VALUE
at 10 kHz
≤ 5 x 10-4
≤ 5 x 10-4
at 100 kHz
≤ 15 x 10-4
≤ 20 x 10-4
8000 V/µs
15 000 V/µs
3100 V/µs
1800 V/µs
1200 V/µs
> 100 000 MΩ
> 30 000 MΩ
> 660 V
2560 V; 1 min
2840 V; 1 min
105 °C
URdc = 1600 V; URac = 550 V; Up-p = 1600 V; C-tol. = ± 5 %
C
(µF)
DIMENSIONS
w x h (h’) x l
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
Pitch = 7.5 mm (bent back)
Leads
Leads
Original pitch
3.5 ± 0.3
25.0 ± 2.0
Ø 500 mm
Ø 356 mm
XX
(SPQ)
Pitch = 15 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
0.0027
0.003
5.0 x 11.0 (13.0) x 17.5
1.1
0.0033
0.0036
0.0039
0.0043
0.0047
6.0 x 12.0 (14.0) x 17.5
1.4
0.0051
0.0056
0.0062
7.0 x 13.5 (15.5) x 17.5
1.8
0.0068
0.0075
0.0082
0.0091
8.5 x 15.0 (17.0) x 17.5
2.5
0.01
0.011
0.012
10.0 x 16.5 (18.5) x 17.5
3.3
0.013
0.015
Pitch = 22.5 ± 0.4 mm; dt= 0.80 ±0.08 mm
0.016
7.0 x 16.5 x 26.0
3.0
0.018
0.02
0.022
0.024
8.5 x 18.0 x 26.0
4.2
0.027
0.03
0.033
10.0 x 19.5 x 26.0
5.3
0.036
0.039
Note
(1) Net weight for short lead products only
www.vishay.com
10
XX
(SPQ)
XX
(SPQ)
Pitch = 15 mm
XX
XX
(SPQ)
(SPQ)
Pitch = 7.5 mm (bent back)
50…
(1250)
54…
(1000)
52…
(1100)
53…
(950)
55…
(550)
50…
(1000)
54…
(1000)
52…
(900)
53…
(800)
55…
(450)
50…
(750)
54…
(500)
52…
(800)
53…
(700)
55…
(400)
50…
(750)
54…
(500)
52…
(650)
53…
(550)
55…
(300)
50…
(500)
54…
(450)
52…
(600)
53…
(500)
55…
(250)
C-VALUE
..YYY
272
302
332
362
392
432
472
512
562
622
682
752
822
912
103
113
123
133
153
Pitch = 22.5 mm
50…
(200)
54…
(250)
52…
(550)
-
-
50…
(200)
54…
(250)
52…
(450)
-
-
50…
(200)
54…
(200)
52…
(350)
-
-
For technical questions, contact: [email protected]
163
183
203
223
243
273
303
333
363
393
Document Number: 28124
Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene
Film Capacitors MMKP Radial Potted Type
Vishay BCcomponents
URdc = 1600 V; URac = 550 V; Up-p = 1600 V; C-tol. = ± 5 %
C
(µF)
DIMENSIONS
w x h (h’) x l
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
Leads
Leads
Pitch = 7.5 mm (bent back)
Original pitch
3.5 ± 0.3
25.0 ± 2.0
Ø 500 mm
Ø 356 mm
XX
(SPQ)
XX
(SPQ)
Pitch = 27.5 ±0.4 mm; dt= 0.80 ±0.08 mm
XX
(SPQ)
XX
(SPQ)
C-VALUE
XX
(SPQ)
Pitch = 27.5 mm
433
0.043
0.047
0.051
11.0 x 21.0 x 31.0
50…
(100)
8
473
54…
(125)
513
0.056
563
623
0.062
0.068
13.0 x 23.0 x 31.0
50…
(100)
9.7
54…
(125)
683
0.075
753
-
0.082
0.091
..YYY
15.0 x 25.0 x 31.0
50…
(100)
12.6
823
54…
(125)
913
0.1
104
0.11
114
0.12
0.13
18.0 x 28.0 x 31.0
50…
(100)
16.3
124
54…
(100)
134
0.15
154
Note
(1) Net weight for short lead products only
SPECIFIC REFERENCE DATA (2000 Vdc)
DESCRIPTION
Tangent of loss angle:
C ≤ 0.01 µF
0.01 µF < C ≤ 0.1 µF
Rated voltage pulse slope (dU/dt)R:
C ≤ 0.0036 µF
0.0036 µF < C ≤ 0.01 µF
0.01 µF < C ≤ 0.024 µF
0.024 µF < C ≤ 0.068 µF
0.068 µF < C ≤ 0.1 µF
R between leads, for C ≤ 1 µF at 500 V; 1 min
R between leads and case; 500 V; 1 min
Ionization (AC) voltage (typical value) at 20 pC peak discharge
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
Withstanding (DC) voltage between leads and case
Maximum aplication temperature
Document Number: 28124
Revision: 05-Nov-08
VALUE
at 10 kHz
≤ 5 x 10-4
≤ 10 x 10-4
For technical questions, contact: [email protected]
at 100 kHz
≤ 15 x 10-4
≤ 18 x 10-4
11 000 V/µs
20 000 V/µs
4400 V/µs
2500 V/µs
1800 V/µs
> 100 000 MΩ
> 30 000 MΩ
> 750 V
3200 V; 1 min
2840 V; 1 min
105 °C
www.vishay.com
11
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film
Capacitors MMKP Radial Potted Type
URdc = 2000 V; URac = 700 V; Up-p = 2000 V; C-tol. = ± 5 %
DIMENSIONS
w x h (h’) x l
(mm)
C
(µF)
MASS
(g) (1)
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
Pitch = 7.5 mm (bent back)
Leads
Leads
Original pitch
3.5 ± 0.3
25.0 ± 2.0
Ø 500 mm
Ø 356 mm
XX
(SPQ)
XX
(SPQ)
Pitch = 15 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
0.001
XX
(SPQ)
Pitch = 15 mm
XX
XX
(SPQ)
(SPQ)
Pitch = 7.5 mm (bent back)
C-VALUE
..YYY
102
0.0011
112
0.0012
122
0.0013
132
0.0015
0.0016
5.0 x 11.0 (13.0) x 17.5
1.1
60…
(1250)
64…
(1000)
62…
(1100)
63…
(950)
65…
(550)
152
162
0.0018
182
0.002
202
0.0022
222
0.0024
242
0.0027
272
0.003
0.0033
6.0 x 12.0 (14.0) x 17.5
1.4
60…
(1000)
64…
(1000)
62…
(900)
63…
(800)
65…
(450)
0.0036
332
362
392
0.0039
0.0043
302
7.0 x 13.5 (15.5) x 17.5
1.8
60…
(750)
64…
(500)
62…
(800)
63…
(700)
65…
(400)
432
0.0047
472
0.0051
512
0.0056
0.0062
8.5 x 15.0 (17.0) x 17.5
2.5
60…
(750)
64…
(500)
62…
(650)
63…
(550)
65…
(300)
562
622
0.0068
682
0.0075
752
0.0082
0.0091
10.0 x 16.5 (18.5) x 17.5
3.3
60…
(500)
64…
(450)
62…
(600)
63…
(500)
65…
(250)
0.01
Pitch = 22.5 mm
113
0.011
7.0 x 16.5 x 26.0
3.0
60…
(200)
64…
(250)
62…
(550)
-
-
0.013
123
133
153
0.015
0.016
912
103
Pitch = 22.5 ± 0.4 mm; dt= 0.80 ± 0.08 mm
0.012
822
8.5 x 18.0 x 26.0
4.2
60…
(200)
64…
(250)
62…
(450)
-
-
163
0.018
183
0.02
203
0.022
10.0 x 19.5 x 26.0
5.3
60…
(200)
64…
(200)
62…
(350)
-
0.024
223
243
Pitch = 27.5 ± 0.4 mm; dt= 0.80 ± 0.08 mm
Pitch = 27.5 mm
273
0.027
0.03
0.033
-
11.0 x 21.0 x 31.0
8.0
60…
(100)
64…
(125)
-
303
333
0.036
363
0.039
393
Note
Net weight for short lead products only
(1)
www.vishay.com
12
For technical questions, contact: [email protected]
Document Number: 28124
Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene
Film Capacitors MMKP Radial Potted Type
C
(µF)
DIMENSIONS
w x h (h’) x l
(mm)
Vishay BCcomponents
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
LOOSE IN BOX
REEL
Leads
Leads
Pitch = 7.5 mm (bent back)
Original pitch
3.5 ± 0.3
25.0 ± 2.0
Ø 500 mm
Ø 356 mm
MASS
(g) (1)
XX
(SPQ)
XX
(SPQ)
60…
(100)
64…
(125)
Pitch = 27.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
XX
(SPQ)
XX
(SPQ)
Pitch = 27.5 mm
C-VALUE
XX
(SPQ)
433
0.043
0.047
13.0 x 23.0 x 31.0
9.7
473
0.051
513
563
0.056
0.062
15.0 x 25.0 x 31.0
60…
(100)
12.6
64…
(125)
623
-
0.068
683
753
0.075
0.082
0.091
..YYY
18.0 x 28.0 x 31.0
60…
(100)
16.3
823
64…
(100)
913
0.10
104
Note
(1) Net weight for short lead products only
SPECIFIC REFERENCE DATA (2500 Vdc)
DESCRIPTION
VALUE
Tangent of loss angle:
at 10 kHz
at 100 kHz
C ≤ 0.015 µF
≤ 5 x 10-4
≤ 10 x 10-4
0.015 µF < C ≤ 0.056 µF
≤5x
≤ 15x 10-4
10-4
Rated voltage pulse slope (dU/dt)R:
C ≤ 0.015 µF
13 000 V/µs
0.015 µF < C ≤ 0.043 µF
6 000 V/µs
0.043 µF < C ≤ 0.056 µF
4200 V/µs
R between leads, for C ≤ 1 µF at 500 V; 1 min
> 100 000 MΩ
R between leads and case; 500 V; 1 min
> 30 000 MΩ
Ionization (AC) voltage (typical value) at 20 pC peak discharge
> 1000 V
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s
3500 V; 1 min
Withstanding (DC) voltage between leads and case
2840 V; 1 min
Maximum aplication temperature
Document Number: 28124
Revision: 05-Nov-08
105 °C
For technical questions, contact: [email protected]
www.vishay.com
13
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film
Capacitors MMKP Radial Potted Type
URdc = 2500 V; URac = 900 V; Up=p = 2500 V; C-tol. = ± 5 %
CATALOG NUMBER BFC2 383 XXYYY AND PACKAGING
C
(µF)
DIMENSIONS
wxhxl
(mm)
LOOSE IN BOX
MASS
(g) (1)
Pitch = 22.5 mm ± 0.4 mm; dt = 0.80 ± 0.08 mm
0.001
0.0011
0.0012
0.0013
0.0015
0.0016
0.0018
0.002
0.0022
6.0 x 15.5 x 26.0
2.4
0.0024
0.0027
0.003
0.0033
0.0036
0.0039
0.0043
0.0047
0.0051
0.0056
0.0062
7.0 x 16.5 x 26.0
3.0
0.0068
0.0075
0.0082
0.0091
8.5 x 18.0 x 26.0
4.2
0.01
0.011
0.012
10.0 x 19.5 x 26.0
5.3
0.013
0.015
Pitch = 27.5 ± 0.4 mm; dt= 0.80 ± 0.08 mm
0.016
9.0 x 19.0 x 31.0
0.018
0.02
11.0 x 21.0 x 31.0
0.022
0.024
0.027
13.0 x 23.0 x 31.0
0.03
0.033
0.036
15.0 x 25.0 x 31.0
0.039
0.043
0.047
18.0 x 28.0 x 31.0
0.051
0.056
Note
(1) Net weight for short lead products only
www.vishay.com
14
REEL
C-VALUE
Leads
3.5 ± 0.3 mm
Leads
25.0 ± 2.0 mm
H = 18.5 mm
XX
(SPQ)
XX
(SPQ)
XX
(SPQ)
70…
(200)
74…
(250)
72…
(600)
70…
(200)
74…
(250)
72…
(550)
70…
(200)
74…
(250)
72…
(450)
70…
(200)
74…
(200)
72…
(350)
5.9
70…
(100)
74…
(150)
8.0
70…
(100)
74…
(125)
9.7
70…
(100)
74…
(125)
12.6
70…
(100)
74…
(125)
16.3
70…
(100)
74…
(100)
For technical questions, contact: [email protected]
..YYY
102
112
122
132
152
162
182
202
222
242
272
302
332
362
392
432
472
512
562
622
682
752
822
912
103
113
123
133
153
163
-
183
203
223
243
273
303
333
363
393
433
473
513
563
Document Number: 28124
Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene
Film Capacitors MMKP Radial Potted Type
Vishay BCcomponents
MOUNTING
NORMAL USE
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting on printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to “Packaging Information” www.vishay.com/docs?28139
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
• For original pitch = 15 mm the capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD
The maximum length and width of film capacitors is shown in the drawing:
• Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned
• Product height with seating plane as given by “IEC 60717” as
reference: hmax. ≤ h + 0.3 mm
bmax. = b + 0.3 mm
Eccentricity
Imax. = I + 0.3 mm
STORAGE TEMPERATURE
• Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation
RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS
Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Document Number: 28124
Revision: 05-Nov-08
For technical questions, contact: [email protected]
www.vishay.com
15
MMKP 383
AC and Pulse Double Metallized Polypropylene Film
Capacitors MMKP Radial Potted Type
Vishay BCcomponents
CHARACTERISTICS
Capacitance as a function of ambient temperature (typical curve)
(1 kHz)
C/C
(%)
4
10
2
Impedance
(Ω)
1 kHz
typical
2
Impedance as a function of frequency (typical curve)
max.
0
10
0
1.0 nF
-1
-2
10
-4
10-2
10 nF
100 nF
min.
-6
- 60
-20
1.0 F
-3
10
4
5
10
60 Tamb (°C) 100
20
2.2 F
6
10
10
10
7
f (Hz)
10
8
Max. DC and AC voltage as function of temperature
factor
1.2
1.0
0.8
0.6
0.4
0.2
0.0
- 50
- 20
20
60
Tamb (°C)
100
Max. RMS voltage as a function of frequency
3
10
10
3
AC voltage
(V)
AC voltage
(V)
10
Max. RMS voltage as a function of frequency
2
10
2
F
0n F
10 n F
0
22 70 n F
4 0n F
0 n
10 00
22
F
0n F
1020 nnF
2 0 F
47 00 n nF
10 200
2
Tamb ≤ 85 °C, 250 Vdc
10 1 3
10
www.vishay.com
16
4
10
10
85 °C ≤ Tamb 100 °C, 250 Vdc
5
6
10
10
7
f (Hz)
10
8
10 1 2
10
3
10
For technical questions, contact: [email protected]
10
4
5
10
10
6
f (Hz)
10
7
Document Number: 28124
Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene
Film Capacitors MMKP Radial Potted Type
Vishay BCcomponents
CHARACTERISTICS
Max. RMS voltage as a function of frequency
10
10
3
AC voltage
(V)
AC voltage
(V)
10
Max. RMS voltage as a function of frequency
3
2
10 2
nF
47 0 nF F
10 0 n
22 0 nF F
47 0 n
0
10
nF
47 nF F
0
10 0 n F
22 0 n nF
47 00
10
85 °C < Tamb ≤ 100 °C, 400 Vdc
Tamb ≤ 85 °C, 400 Vdc
10 1 3
10
4
10
10
5
6
10
10
7
f (Hz)
10
8
10 1 2
10
Max. RMS voltage as a function of frequency
3
10
Tamb ≤ 85 °C, 630 Vdc
4
10
10
5
6
10
10
7
f (Hz)
10
8
2
10 1 2
10
f (Hz)
10
7
85 °C < Tamb ≤ 100 °C, 630 Vdc
3
10
10
4
5
10
10
6
f (Hz)
10
7
3
AC voltage
(V)
AC voltage
(V)
10
10
Tamb ≤ 85 °C, 1000 Vdc
4
10
Document Number: 28124
Revision: 05-Nov-08
10
5
6
10
10
7
f (Hz)
10
8
2
10 1 3
10
nF
4.7 nF
10 nF
227 nFnF
4 0 F
10 20 n nF
2 70
4
2
10 1 3
10
6
Max. RMS voltage as a function of frequency
3
nF
4.7 nF
10 2 nFF
2 7n F
4 0n F
1020 nnF
2 70
4
10
10
3
Max. RMS voltage as a function of frequency
10
5
10
nF
47 0 nFF
10 0 n F
22 0 n nF
47 00
10
2
10 1 3
10
4
AC voltage
(V)
10
nF
47 0 nFF
10 0 n F
22 0 n nF
47 00
10
10
10
Max. RMS voltage as a function of frequency
AC voltage
(V)
10
3
10
85 °C < Tamb ≤ 100 °C, 1000 Vdc
4
10
10
For technical questions, contact: [email protected]
5
6
10
10
7
f (Hz)
10
8
www.vishay.com
17
MMKP 383
AC and Pulse Double Metallized Polypropylene Film
Capacitors MMKP Radial Potted Type
Vishay BCcomponents
CHARACTERISTICS
Max. RMS voltage as a function of frequency
Max. RMS voltage as a function of frequency
3
10
10 1 3
10
10
10
10
2
85 °C < Tamb ≤ 105 °C, 1400 Vdc
Tamb ≤ 85 °C, 1400 Vdc
4
nF
2.2.7 nF
4 0 nF F
1 n
227 nF F
4 0n
10
nF
2.2.7 nFF
4 n
10 2 nFF
2 7 n nF
4 0
10
2
10
3
AC voltage
(V)
AC voltage
(V)
10
5
6
10
10
7
f (Hz)
10
8
10 1 2
10
3
10
Max. RMS voltage as a function of frequency
10
f (Hz)
10
7
4
10
2
85 °C < Tamb ≤ 100 °C, 1600 Vdc
Tamb ≤ 85 °C, 1600 Vdc
10
5
6
10
10
7
f (Hz)
10
8
10 1 2
10
www.vishay.com
18
4
10
10
4
5
10
10
6
f (Hz)
10
7
3
AC voltage
(V)
10
2
85 °C < Tamb ≤ 100 °C, 2000 Vdc
Tamb ≤ 85 °C, 2000 Vdc
10 1 3
10
10
nF
1.0 nF
2.2.7 nFF
4 0 n nF
1
22 7 nF F
4 0n
10
AC voltage
(V)
10
2
3
10
Max. RMS voltage as a function of frequency
3
nF F
1.0.2 n F
2 7n F
4. 0 n nF
1
227 nF F
4 0n
10
10
6
3
Max. RMS voltage as a function of frequency
10
10
nF
4.7 nF
10 2 nFF
2 7 n nF
4 0
10
2
10 1 3
10
5
10
AC voltage
(V)
10
nFF
4.70 n nF
1
227 nFnF
4 0
10
10
4
Max. RMS voltage as a function of frequency
3
AC voltage
(V)
10
10
5
6
10
10
7
f (Hz)
10
8
10 1 2
10
3
10
For technical questions, contact: [email protected]
10
4
5
10
10
6
f (Hz)
10
7
Document Number: 28124
Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene
Film Capacitors MMKP Radial Potted Type
Vishay BCcomponents
CHARACTERISTICS
Max. RMS voltage as a function of frequency
3
2
10
nF
1.0 nF
2.2 nF
4.7 nF
10 nF
22 nF
47
nF
1.0.2 nF
2
nF
4.7 nF
102 nFF
2 7n
4
10
3
AC voltage
(V)
10
AC voltage
(V)
10
Max. RMS voltage as a function of frequency
2
Tamb ≤ 85 °C, 2500 Vdc
10 1 3
10
4
10
10
85 °C < Tamb ≤ 105 °C, 2500 Vdc
5
6
10
10
7
f (Hz)
10
8
Insulaton resistance as a function of ambient temperature
106
10 1
2
3
10
10
10
4
5
10
10
6
f (Hz)
10
7
Max. allowed component temperature rise (ΔT) as a function of the
ambient temperature (Tamb)
RC (s)
ΔT (°C)
12
8
105
4
104
0
0
20
Document Number: 28124
Revision: 05-Nov-08
40
60
80
Tamb (°C)
100
- 50
- 20
For technical questions, contact: [email protected]
20
60
Tamb (°C)
100
www.vishay.com
19
MMKP 383
AC and Pulse Double Metallized Polypropylene Film
Capacitors MMKP Radial Potted Type
Vishay BCcomponents
Tangent of loss angle as a function of frequency (typical curve)
Dissipation factor (x 10-4)
103
102
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
20
19
18
17
101
100
102
103
104
105
(Hz)
106
250 V
C ≤ 0.091 µF, curve 8
C ≤ 0.015 µF, curve 9
C ≤ 0.022 µF, curve 10
C ≤ 0.027 µF, curve 11
C ≤ 0.033 µF, curve 12
C ≤ 0.056 µF, curve 15
C ≤ 0.082 µF, curve 16
C ≤ 1.2 µF, curve 18
C ≤ 1.61 µF, curve 19
C ≤ 2.21 µF, curve 20
400 V
C ≤ 0.047 µF, curve 5
C ≤ 0.068 µF, curve 6
C ≤ 0.1 µF, curve 7
C ≤ 0.2 µF, curve8
C ≤ 0.24 µF, curve 12
C ≤ 0.36 µF, curve 13
C ≤ 0.43 µF, curve 14
C ≤ 0.56 µF, curve 16
C ≤ 1.1 µF, curve 17
630 V
C ≤ 0.033 µF, curve 4
C ≤ 0.068 µF, curve 5
C ≤ 0.1 µF, curve 6
C ≤ 0.15 µF, curve 7
C ≤ 0.22 µF, curve 11
C ≤ 0.27 µF, curve 12
C ≤ 0.47 µF, curve 15
C ≤ 0.68 µF, curve 16
1000 V
C ≤ 0.01 µF, curve 2
C ≤ 0.027 µF, curve 3
C ≤ 0.047 µF, curve 4
C ≤ 0.062 µF, curve 5
C ≤ 0.075 µF, curve 6
C ≤ 0.1 µF, curve 7
C ≤ 0.15 µF, curve 8
C ≤ 0.22 µF, curve 9
C ≤ 0.3 µF, curve 10
C ≤ 0.39 µF, curve 11
C ≤ 0.47 µF, curve 12
140 V
C ≤ 0.0047 µF, curve 1
C ≤ 0.016 µF, curve 2
C ≤ 0.033 µF, curve 3
C ≤ 0.051 µF, curve 4
C ≤ 0.068 µF, curve 5
C ≤ 0.082 µF, curve 6
C ≤ 0.1 µF, curve 7
1600 V
C ≤ 0.0047 µF, curve 3
C ≤ 0.0091 µF, curve 4
C ≤ 0.068 µF, curve 5
C ≤ 0.01 µF, curve 6
C ≤ 0.15 µF, curve 7
2000 V
C ≤ 0.0047 µF, curve 2
C ≤ 0.033 µF, curve 3
C ≤ 0.1 µF, curve 4
2500 V
C ≤ 0.0047 µF, curve 1
C ≤ 0.015 µF, curve 2
C ≤ 0.056 µF, curve 3
HEAT CONDUCTIVITY (G) AS A FUNCTION OF (ORIGINAL) PITCH AND CAPACITOR BODY THICKNESS IN mW/°C
HEAT CONDUCTIVITY (mW/°C)
Wmax.
(mm)
PITCH 15 mm
PITCH 22.5 mm
PITCH 27.5 mm
4.0
5.0
6.0
7.0
8.5
10.0
11.0
13.0
15.0
18.0
10
11
12
16
18
-
19
21
25
28
-
36
42
48
57
www.vishay.com
20
For technical questions, contact: [email protected]
Document Number: 28124
Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene
Film Capacitors MMKP Radial Potted Type
Vishay BCcomponents
POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of
the free air ambient temperature.
The power dissipation can be calculated according type detail specification “HQN-384-01/101: Technical Information Film
Capacitors”.
The component temperature rise (ΔT) can be measured (see section “Measuring the component temperature” for more details)
or calculated by ΔT = P/G:
• ΔT = Component temperature rise (°C)
• P = Power dissipation of the component (mW)
• G = Heat conductivity of the component (mW/°C)
MEASURING THE COMPONENT TEMPERATURE
A thermocouple must be attached to the capacitor body as in:
Thermocouple
The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC).
The temperature rise is given by ΔT = TC - Tamb.
To avoid radiation or convection, the capacitor should be tested in a wind-free box.
APPLICATION NOTE AND LIMITING CONDITIONS
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described
hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference
suppression capacitors conforming the standards must be used.
To select the capacitor for a certain application, the following conditions must be checked:
1. The peak voltage (UP) shall not be greater than the rated DC voltage (URdc)
2. The peak-to-peak voltage (UP-P) shall not be greater than 2√2 x URac to avoid the ionisation inception level
3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without
ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and
divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T
2
dU
dU
2 × ∫ ⎛ --------⎞ × dt < U Rdc × ⎛ --------⎞
⎝ dt ⎠ rated
⎝ dt ⎠
0
T is the pulse duration.
4. The maximum component surface temperature rise must be lower than the limits (see graph max. allowed component
temperature rise).
5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor
breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values
mentioned in the table: “Heat Conductivity”
Document Number: 28124
Revision: 05-Nov-08
For technical questions, contact: [email protected]
www.vishay.com
21
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film
Capacitors MMKP Radial Potted Type
6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with
an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and
surge voltages from the mains included).
VOLTAGE CONDITIONS FOR 6 ABOVE
ALLOWED VOLTAGES
Maximum continuous RMS voltage
Maximum temperature RMS-overvoltage (< 24 h)
Maximum peak voltage (VO-P) (< 2 s)
Tamb ≤ 85 °C
85 °C < Tamb ≤ 105 °C
URac
URac
1.25 x URac
1.6 x URdc
1.25 x URac
1.1 x URdc
EXAMPLE
C = 4 nF - 1600 V used for the voltage signal shown in next drawing.
UP-P = 1000 V; UP = 900 V; T1 = 12 µs; T2 = 64 µs; T3 = 4 µs
The ambient temperature is 80 °C. In case of failure, the oscillation is blocked.
Checking conditions:
1. The peak voltage UP = 900 V is lower than 1600 Vdc
2. The peak-to-peak voltage 1000 V is lower than 2√2 x 550 Vac = 1600 UP-P
3. The voltage pulse slope (dU/dt) = 1000 V/4 µs = 250 V/µs
This is lower than 8000 V/µs (see specific reference data for each version)
4. The dissipated power is 35 mW as calculated with fourier terms and typical tgd.
The temperature rise for Wmax. = 6.0 mm and pitch = 15 mm will be 35 mW/11 mW/°C = 3.2 °C
This is lower than 10 °C temperature rise at 80 °C, according graph.
5. Oscillation is blocked
6. Not applicable
Voltage Signal
Voltage
Up
Up-p
Time
T3
T1
T2
www.vishay.com
22
For technical questions, contact: [email protected]
Document Number: 28124
Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene
Film Capacitors MMKP Radial Potted Type
Vishay BCcomponents
INSPECTION REQUIREMENTS
General Notes:
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-17 and
specific reference data”.
Group C Inspection Requirements
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1
Dimensions (detail)
As specified in chapters “General Data” of
this specification
4.3.1
Initial measurements
Capacitance
Tangent of loss angle:
For C ≤ 1 µF at 100 kHz or
for C > 1 µF at 10 kHz
4.3
Robustness of terminations
Tensile: Load 10 N; 10 s
Bending: Load 5 N; 4 x 90°
4.4
Resistance to soldering heat
Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 10 s
4.14
Component solvent resistance
Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min ± 0.5 min
Recovery time: Min. 1 h, max. 2 h
4.4.2
Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 1 % of the value measured initially
Tangent of loss angle
Increase of tan δ
≤ 0.0005 for: C ≤ 100 nF or
≤ 0.001 for: 100 nF < C ≤ 470 nF or
≤ 0.0015 for: C > 470 nF
Compared to values measured in 4.3.1
No visible damage
SUB-GROUP C1B OTHER PART OF
SAMPLE OF SUB-GROUP C1
4.6.1
4.15
Initial measurements
Solvent resistance of the marking
4.6
Rapid change of temperature
4.7
Vibration
Document Number: 28124
Revision: 05-Nov-08
Capacitance
Tangent of loss angle:
For C ≤ 1 µF at 100 kHz or
for C > 1 µF at 10 kHz
Isopropylalcohol at room temperature
Method: 1
Rubbing material: cotton wool
Immersion time: 5.0 min ± 0.5 min
θA = - 55 °C
θB = + 105 °C
5 cycles
Duration t = 30 min
Visual examination
Mounting: see section “Mounting” for more
information
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s²
(whichever is less severe)
Total duration 6 h
No visible damage
Legible marking
No visible damage
For technical questions, contact: [email protected]
www.vishay.com
23
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film
Capacitors MMKP Radial Potted Type
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C1B OTHER PART OF
SAMPLE OF SUB-GROUP C1
4.7.2
Final inspection
4.9
Shock
4.9.3
Final measurements
CONDITIONS
PERFORMANCE REQUIREMENTS
Visual examination
Mounting:
See section “Mounting” for more information
Pulse shape: Half sine
Acceleration: 490 m/s²
Duration of pulse: 11 ms
Visual examination
Capacitance
Tangent of loss angle
No visible damage
Insulation resistance
SUB-GROUP C1 COMBINED SAMPLE OF
SPECIMENS OF SUB-GROUPS
C1A AND C1B
4.10
Climatic sequence
4.10.2 Dry heat
4.10.3
4.10.4
Damp heat cyclic
Test Db, first cycle
Cold
Damp heat cyclic
Test Db, remaining cycles
4.10.6.2 Final measurements
No visible damage
|ΔC/C| ≤ 1 % of the value measured in 4.6.1
Increase of tan δ
≤ 0.0005 for: C ≤ 100 nF or
≤ 0.001 for: 100 nF < C ≤ 470 nF or
≤ 0.0015 for: C > 470 nF
Compared to values measured in 4.6.1
As specified in section “Insulation
Resistance” of this specification
Temperature: + 105 °C
Duration: 16 h
Temperature: - 55 °C
Duration: 2 h
4.10.6
Voltage proof = URdc for 1 min within 15 min
after removal from testchamber
Visual examination
Capacitance
Tangent of loss angle
Insulation resistance
No breakdown of flash-over
No visible damage
Legible marking
For original pitch = 22.5 mm and 27.5 mm:
|ΔC/C| ≤ 3 % of the value measured in
4.4.2 or 4.9.3
Increase of tan δ
≤ 0.0005 for: C ≤ 100 nF or
≤ 0.001 for: 100 nF < C ≤ 470 nF or
≤ 0.0015 for: C > 470 nF
Compared to values measured in 4.3.1.
or4.6.1
≥ 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C2
4.11
Damp heat steady state
4.11.1
Initial measurements
4.11.3
Final measurements
56 days, 40 °C, 90 % to 95 % RH
no load
Capacitance
Tangent of loss angle at 1 kHz
Voltage proof = URdc for 1 min within 15 min
after removal from testchamber
Visual examination
Capacitance
Tangent of loss angle
Insulation resistance
www.vishay.com
24
For technical questions, contact: [email protected]
No breakdown of flash-over
No visible damage
Legible marking
|ΔC/C| ≤ 1 % of the value measured in
4.11.1.
Increase of tan δ
≤ 0.0005 for: C ≤ 100 nF or
≤ 0.001 for: 100 nF < C ≤ 470 nF or
≤ 0.0015 for: C ≤ 470 nF
Compared to values measured in 4.11.1
≥ 50 % of values specified in section
“Insulation Resistance” of this specification
Document Number: 28124
Revision: 05-Nov-08
MMKP 383
AC and Pulse Double Metallized Polypropylene
Film Capacitors MMKP Radial Potted Type
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
Vishay BCcomponents
PERFORMANCE REQUIREMENTS
SUB-GROUP C3A
4.12.1
Endurance test at 50 Hz alternating
voltage
Duration: 2000 h
1.25 x URdc at 105 °C
4.12.1.1 Initial measurements
Capacitance
Tangent of loss angle:
For C ≤ 1 µF at 100 kHz or
for C > 1 µF at 10 kHz
4.12.1.3 Final measurements
Visual examination
No visible damage
Legible marking
Capacitance
|ΔC/C| ≤ 5 % compared to values measured
in 4.12.1.1
Tangent of loss angle
Increase of tan δ
≤ 0.0005 for: C ≤ 100 nF or
≤ 0.001 for: 100 nF < C ≤ 470 nF or
≤ 0.0015 for: C > 470 nF
Compared to values measured in 4.12.1.1
Insulation resistance
≥ 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C4
4.2.6
Temperature charcteristics
Initial measurements
Intermediate measurements
Final measurements
Capacitance
Capacitance at - 55 °C
Capacitance at 20 °C
Capacitance at + 105 °C
Capacitance
Insulation resistance
4.13
Charge and discharge
For - 55 °C to + 20 °C:
+ 1 % ≤ |ΔC/C| ≤ 3.75 % or
for 20 °C to 105 °C:
- 6 % ≤ |ΔC/C| ≤ 0 %
As specified in section “Capacitance” of this
specification.
As specified in section “Insulation
Resistance” of this specification
10 000 cycles
Charged to URdc
Discharge resistance:
U Rdc
R = -----------------------------------------------5xCx ( 2.5xdU ⁄ dt )
4.13.1
Initial measurements
Capacitance
Tangent of loss angle:
For C ≤ 1 µF at 100 kHz or
for C > 1 µF at 10 kHz
4.13.3
Final measurements
Capacitance
|ΔC/C| ≤ 1 % compared to values measured
in 4.13.1
Tangent of loss angle
Increase of tan δ
≤ 0.0005 for: C ≤ 100 nF or
≤ 0.001 for: 100 nF < C ≤ 470 nF or
≤ 0.0015 for: C > 470 nF
Compared to values measured in 4.13.1
Insulation resistance
≥ 50 % of values specified in section
“Insulation Resistance” of this specification
Document Number: 28124
Revision: 05-Nov-08
For technical questions, contact: [email protected]
www.vishay.com
25
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1