32-bit microcontrollers for automotive and industrial applications

Highly integrated and performance optimized
32-bit microcontrollers for automotive and industrial applications
www.infineon.com/aurix
Contents
TriCore™ family concept3
Evolution of TriCore™ generations4
TriCore™ based product roadmap5
PRO-SIL™ safety concept6
AURIX™ family system architecture7
Embedded software (AUTOSAR etc.)15
Development support17
AURIX™ for powertrain applications20
AURIX™ for safety applications30
AURIX™ for connectivity applications40
AURIX™ for transportation applications44
AURIX™ for industrial applications46
Tool partners51
2
Family highlights
››Compatibility and scalability
››Lowest system cost
››Industry benchmark system
performance
››Easy to use
››Broad portfolio
››Certified to automotive standards
Powertrain
Applications
››
››Gasoline multi-port Injection
››Diesel direct injection
››Automatic transmission –
Gasoline direct injection
hydraulic control
Applications
››
››Electric Power Steering (EPS)
››Active suspension control system
››Advanced airbag system
››Braking ECU
Safety
Chassis domain control
Connectivity
Applications
››
››Connected gateway
››Advanced body applications
››Telematics including software update
Body domain controller
››Dry double clutch transmission –
hydraulic control
››Dry double clutch transmission –
electrical control
››Integrated (H)EV control
››(H)EV battery management system
››Multi-purpose camera configuration
››Short-range radar (24 GHz) system
››Long-range radar (76/77 GHz) system
››V2x communication
››eHorizon
over the air
Industrial & Multimarket
Transportation
Applications
››Commercial and
Agricultural Vehicle (CAV)
››Fun vehicle
››Transportation
››Trucks
Applications
››Mobile controller
››Inverter
››Wind turbine inverter
››Solar panel
3
Evolution of TriCore™ generations
In 1999, Infineon launched the first generation of the AUDO
(AUtomotive unifieD processOr) family. Based on a unified
RISC/MCU/DSP processor core, this 32-bit TriCore™ micro‑
controller was a computational power horse. And the
company has evolved and optimized the concept ever since
– culminating in what is now the fifth TriCore™ generation.
AUDO
AUDO NG
(Next generation)
easy‑to‑use functional safety support, a strong increase
in performance and a future-proven security solution in a
highly scalable product family.
AUDO future
With its high real-time performance, embedded safety and
security features, the TriCore™ family is the ideal platform
for a wide range of automotive applications such as the
control of combustion engines, electrical and hybrid vehicles, transmission control units, chassis domains, braking
systems, electric power steering systems, airbags and
advanced driver assistance systems. TriCore™-based products also deliver the versatility required for the industrial
sector, excelling in optimized motor control applications
and signal processing. Infineon’s broad product portfolio
allows engineers to choose from a wide range of memories,
peripheral sets, frequencies, temperatures and packaging
options. And all this with a high degree of compatibility
across generations.
4
The TriCore™ success story continues with the introduction of the AURIX™ multicore family. AURIX™ combines
AUDO MAX
AURIX™
The new AURIX™ family members are manufactured in a
65nm embedded Flash technology designed for ultimate
reliability in harsh automotive environments. Furthermore,
the dual frontend concept ensures continuous supply.
As was the case with previous generations, safety software
is also available to help manufacturers meet SIL/ ASIL safety standards, as well as AUTOSAR libraries which Infineon
has been developing since 2005.
TriCore™ based product roadmap
Production
Segment
AUDO family
130 nm
90 nm
TC1798
300 MHz, 4 MB
Development
AURIX™ family
AURIX™ family
65 nm
65 nm
TC29x
300 MHz, 8 M
TC290
TC1797
High end
Bare die
180 MHz, 4 MB
TC27x
200 MHz, 4 M
TC1793
270 MHz, 4 MB
TC270
TC1791
200 MHz, 4 M
Bare die
240 MHz, 4 MB
TC1746
180 MHz, 2.5 M
Bare die
TC1768
133 MHz, 3 M
Bare die
TC26x
200 MHz, 2.5 M
TC1784
Mid range
180 MHz, 2.5 MB
TC260
200 MHz, 2.5 M
Bare die
TC1782
180 MHz, 2.5 MB
TC1767
TC23x
80/133 MHz, 2 MB
200 MHz, 2 M
TC1728
133 MHz, 1.5 MB
TC1724
80 MHz, 1.5 MB
Low end
TC22x
133 MHz, 1 M
TC1736
TC21x
80 MHz, 1 MB
Companion
ICs
Production
100 MHz, 0.5 M
CIC61508
Safety IC
Development
Concept / on request
5
PRO-SIL™
Infineon’s PRO-SIL™ program, designed to protect
The functional complexity and levels of integration of
real-time safety-critical applications continue to increase
exponentially. In addition, the product life cycle of these
applications has to meet stringent safety standards. Norms
such as IEC 61508 and ISO 26262 mandate more robust
and comprehensive product development processes and
functional safety concepts in automotive and industrial
applications.
Infineon’s PRO-SIL™ safety program is designed to ease
and speed up your automotive and industrial design to
comply with such standards. Across the full certification
spectrum from Safety Integrity Levels (SIL) 1 to 4 and
Automotive Safety Integrity Levels (ASIL) A to D, our endto-end PRO-SIL™ approach will help you select the right
hardware, software and functional safety concepts to meet
your design and compliance needs.
PRO-SIL™ highlights
››Broad hardware portfolio from sensors to microcontrollers, along with analog and power management ICs
providing SIL-supporting features.
››For ISO 26262 PRO-SIL™ products, safety concepts are
in place to enable the required safety measures, testing,
monitoring and diagnostics capabilities for your safety
architecture.
››Comprehensive safety software packages for seamless
integration are in place, such as the SafeTlib software for
Infineon’s AURIX™ microcontroller family
››Full range of support services – from consulting and
design advice, including training, documentation and
technical support – can be provided.
››Safety-focused organization and project management
based on Infineon’s zero defect program, safety culture
and quality management system are in place.
Infineon’s PRO-SIL™ logo guides you to our products
(HW, SW, safety documentation) with SIL-supporting features. These products will simplify the implementation of
customers’ system design and improve time-to-market in
achieving the desired functional safety level compliance.
Scalability
Enables system design in line with
different IEC 61508 and ISO 26262 ASIL
Compliant to
IEC 61508, ISO 26262, ISO 25119
CMM level 3
High diagnostic coverage
Satisfy requirement for startup
and runtime testing
Application independence
From chassis through body
to powertrain
AUTOSAR supported
Standard AUTOSAR can be used
Free evaluation version
From sales contact
www.infineon.com/prosil
6
AURIX™ family system architecture
AURIX™ is Infineon’s brand new family of microcontrollers
serving exactly the needs of the automotive industry in
terms of performance and safety. Its innovative multicore
architecture, based on up to three independent 32-bit
TriCore™ CPUs, has been designed to meet the highest
safety standards while significantly increasing performance
at the same time.
Customers wanting to reduce their time-to-market can
now cut down their MCU safety development by 30%.
By the same token, a performance surplus of 50% up to
100% allows for more functionality and offers a sufficient
resource buffer for future requirements, keeping the power consumption on the single-core microcontroller level.
While protecting IP, and preventing theft and fraud, AURIX™
provides an already built-in hardware security module.
Using the AURIX™ platform, automotive developers will
be able to control powertrain and safety applications with
one single MCU platform. Developments using AURIX™
will require less effort to achieve the ASIL-D standard than
with a classical lockstep architecture.
FPU
PMI
With its special feature set, AURIX™ is the perfect match for
powertrain applications (including hybrid and electrical
vehicles) as well as safety applications (such as steering,
braking, airbag and advanced driver assistance systems).
PMU
LMU
DMI
overlay
TriCore™
1.6P
Data flash
BROM
key flash
RAM
Progr.
flash
Progr.
flash
SRI cross bar
Diverse
Lockstep core
FPU
PMI
Diverse
Lockstep core
DMI
overlay
TriCore™
1.6P
PMI
FPU
TriCore™
1.6E
Bridge
DMI
standby
overlay
SDMA
System peripheral bus
System peripheral bus
PLL &
PLL ERAY
HSSL
BCU
SCU
STM
HSM
DS-ADCx
ADCx
IOM
FCE
I2C
PSI5
SENT
EVR
QSPIx
GPT12x
ASCLINx
CCU6x
Ports
MSCx
MultiCAN+
FlexRay
Ethernet
GTM
OCDS
5 V or 3.3 V
single supply
7
AURIX™ family package scalability
TQFP-80
TQFP-100
LQFP-144
TQFP-144
LQFP-176
9x series
up to 8 MB
max. SRAM 2.75 MB
triple-core
7x series
up to 4 MB
max. SRAM 472 KB
triple-core
6x series
up to 2.5 MB
max. SRAM 752 KB
dual-core
TC264
3x series
up to 2 MB
max. SRAM 708 KB
Lockstep-core
2x series
up to 1 MB
max. SRAM 96 KB
Lockstep-core
1x series
up to 512 KB
max. SRAM 56 KB
Lockstep-core
TC233
TC234
TC222
TC223
TC224
TC212
TC213
TC214
LFBGA-292
BGA-416
LFBGA-516
TC297
TC298
TC299
TC275
TC277
TC265
TC267
TC237
Upgrade/downgrade with pin-compatible packages
››Advanced package technologies deliver the best price/performance ratio
››Customers can choose between different devices in the same pin-compatible package
TriCore™ upgrade paths
LFBGA-516
LFBGA-292
BGA scalability
25 x 25 mm
17 x 17 mm
››LFBGA-292 and LFBGA-516 are ball compatible so that customers can build one PCB for both packages
8
Package information1)
LFBGA-516
BGA-416
27
1
27
25
0.8
25
0.8
1
LFBGA-292
LQFP-176
26
0.5
26
17
0.8
17
0.8
0.5
LQFP-144
TQFP-144
22
0.5
0.4
18
22
18
0.4
0.5
TQFP-100
TQFP-80
16
0.4
0.4
16
14
14
0.4
0.4
1) For further information on Infineon packages, please visit our internet site at www.infineon.com/packages
9
AURIX™ (HW and SW) development according to the ISO 26262 process
››Independent functional safety management
established at Infineon
››Compliance report available
––SDHB to ISO 26262 Gap Analysis performed by Exida
––Close-the-gap activities performed by Infineon
––Exida has issued a compliance report (Jan 2012) for Infineon HW and SW development processes for building
systems up to ASIL-D
Final ISO 26262
Functional Safety Audit
Report
Project
Functional Safety Audit
Customer
Infineon Technologie AG
Infineon® diverse lockstep concept
››Lockstep architecture designed to control and mitigate
››Careful design of lockstep comparator
››Main core and diverse lockstep core run the same software
common cause factors
––Physical isolation
––Instruction-level execution diversity: 2-cycle delay
––Circuit-level design & timing diversity
››Layout-level diversity
››Diversity controlled and verified by state‑of‑the‑art
design methods
››Special design of clock & reset networks
in parallel to detect computational errors
››Like normal locksteps, both cores are physically separated
and have a time delay between their execution
››Diverse lockstep core has been additionally transformed to
provide architectural hardware diversity and further reduce
common cause failures
BUS
Main Core
Delay
Delay
Delay
Delay
Lockstep
core
Compare
BUS
Lockstep
10
Lockstep CPU
Error
Multi-AUTOSAR OS support on one microcontroller
››AURIX™ provides a memory protection system for each
core plus an additional distributed hardware-based
resource management system
››Each peripheral and shared SRAM has a resource management unit that works as a local access protection mechanism to allow or deny access
››When combined with the memory protection system, this
hardware can be used to prevent selected direct access
from certain tasks or cores to peripherals or regions of
SRAMs and instead redirect the attempted access to a
hypervisor function
Safety
agent
››The hypervisor can arbitrate/grant/deny access and
therefore provide paravirtualization of mixed-criticality
tasks in an unified sub-system architecture with a minimal CPU overhead
››AURIX™ therefore provides the ability to run mixed-criticality software requiring real-time access while still
enforcing encapsulation and freedom of interference
between cores, even when the cores are not running time
and memory-protected operating systems
APP
...
APP
... ...
Safety monitor
AUTOSAR
Hypervisor
Supervisor/user
AURIX™
AURIX™ protection system overview
››Hardware support for freedom of interference
––Between SW components
––Between HW parts
––Between HW parts & SW components
››Timing protection
APP
APP
AUTOSAR
core 0
APP
APP
AUTOSAR
core 1
APP
APP
AUTOSAR
core 2
Hypervisor
Hardware
11
AURIX™ family communication innovation
AURIX™ MultiCAN
››Up to 6 CAN nodes with FD support available
››CAN standard V2.0 B active
››ISO11898-1 FDIS 2014 CAN-FD
››Specific AURIX™ variants support ISO11898-1 DIS 2015
››Resonator ready with asynchronous operation and choice
of clock source
››Frequency scaling without baud rate change
››Energy saving: pretended networking and partial
networking (ISO11898-6 transceiver support) support
(also in CAN FD mode)
››Safety support: total amount of bus errors countable
››Message objects can be freely assigned among the nodes
››Configurable FIFO length, automatic gateway
mode support
››Acceptance mask filtering for each message object
AURIX™
ISO 11898-6 transceiver
support
Ethernet
Highlights
››MAC integrated in µC
››IEEE 802.3-2002 for Ethernet with support of
IP, TCP/IP, UDP ...
››Real-time stamping support (IEEE 1588-2008)
for clock synchronization
››Standard MII and RMII interfaces to PHY
››Fast Ethernet w/ 100 Mbit
››AUTOSAR V4 features supported
››Automatic CRC checksum and padding support
››AVB support
MCU core
Internal bus
Automotive Ethernet module
(1588 MAC)
IEEE 802.3
“Standard” ETH module
1588 real-time extension
MII / RMII interface
ETH PHY (transceiver)
or
multiport switch
12
AURIX™ family offers a complete roadmap for automotive security
TQFP-100
TQFP-144
LQFP-176
9x series
TC275T
7x series
200 MHz
HSM
up to 4 MB
up to 2 MB
LFBGA-516
Bare Die
TC297T
TC299T
TC290T
270 MHz
HSM
up to 8 MB
3x series
LFBGA-292
TC233L
TC234L
200 MHz
HSM
270 MHz
HSM
270 MHz
HSM
TC277T
Typical use cases
››Secure on-board communication
››Tuning protection
››Immobilizer
››Secure SW update
TC270T
200 MHz
HSM
200 MHz
HSM
TC237L
200 MHz
HSM
200 MHz
HSM
High-end engine & transmission management
ADAS & sensor fusion domain control (H)EV System
Mid-range engine & transmission management
High-end brake and EPS domain control (H)EV system
EPS airbag brake systems ADAS
AURIX™ hardware security module – anchor of trust thanks to separated
logical protection domain
Flash
TriCore™ 0
TriCore™ 1
32-bit
CPU
SRAM
Firewall
SRAM
Bridge
Boot
ROM
AES
128
TRNG
Peripherals
Peripherals
Peripherals
Timer
HSM domain
Trusted execution environment
The SHE+ driver controls the hardware security peripheral in the HSM domain
and interacts with the TriCore™ host core. SHE+ offers the AUTOSAR CRY interface for integrating the HSM security features into an automotive application,
including interface to AUTOSAR, communication from TriCore™ to HSM and vice
versa, key storage functionality and security peripheral drivers.
AURIX™ Hardware Security Module
(HSM)
››A highly flexible and programmable
solution
––AES128 and TRNG implemented
in HW
––Customer-specific requirements,
such as HASH or asymmetric encryp­
tion, can be implemented in software
››Offers the performance required to
encrypt/decrypt e.g. Ethernet traffic
››Secure key storage provided by separated HSM-DFLASH portion
––Alternative secure key storage
feasible in dedicated HSM-PFLASH
sections
SHE+
software
››
13
AURIX™ security software
Infineon’s AURIX™ 32-bit microcontroller family offers a
wide portfolio of compatible devices with embedded
Hardware Security Module (HSM), which offers cost-efficient
solutions for all typical automotive security applications.
The SHE+ driver controls the hardware security peripheral
in the HSM domain and interacts with the TriCore™ host
core. SHE+ comes with the AUTOSAR CRY interface for
integrating the HSM security features into an automotive
application, including interface to AUTOSAR, communication from TriCore™ to HSM and vice versa, key storage
functionality and security peripheral drivers.
HIS SHE
HSM SHE+ V1
HSM SHE+ envisioned
10 keys
20 keys
Configurable
Symmetric
data encryption / decryption
HW-based AES-128-bit (ECB, CBC)
HW-based AES-128-bit
(ECB, CBC, OFB, CFB, CTR, XTC, GCM)
l
MAC generation / verification
l
l
l
Safe MAC verification
–
l
l
SHE PRNG
SHE PRNG TRNG
l
l
–
l
Key management
Random number management
Secure boot
Debug access
–
–
Enhanced by HSM debug options
Other SHE services
l
l
l
Asymmetric
encryption / decryption
–
–
SW-based RSA1024
SW-based ECC256
Tuning protection
Immobilizer
Possible extensions, depending on
specific tier1 / OEM use case
Typical applications
Secure-on-board communication
Key management
l
l
l
Symmetric
data encryption / decryption
l
l
l
MAC generation / verification
l
l
l
(optional)
(optional)
l
l
l
Secure boot
(optional)
(optional)
(optional)
Debug access
(for development)
(for development)
(for development)
l
l
l
(optional in future)
(optional in future)
(optional in future)
Safe MAC verification
Random number management
Other SHE services
Asymmetric
encryption / decryption
14
Embedded software
TriCore™ performance
Real-life application benchmark (software controlling a four-cylinder diesel engine)
228%
100%
100%
TC1767
TC1797
TC1782
TC1.3.1
@ 80 MHz
TC1.3.1
@ 180 MHz
TC1.3.1
@ 180 MHz
140%
128%
113%
152%
170%
46%
TC1791/
TC1793
TC1.6
@ 200 MHz
TC1791
TC1793
TC1798
TC1.6
@ 240 MHz
TC1.6
@ 270 MHz
TC1.6
@ 300 MHz
TC27x
1x TC16E&
1x TC16P
@ 200 MHz
TC29x
2x TC16P
@ 300 MHz
Assuming a multicore performance gain of 1.5 times
Infineon software product overview
Modeling
tools
Tools
››Microcontroller abstraction drivers
––AUTOSAR MCAL
––DAVE™
››Safety drivers
––PRO-SIL™ SafeTcore (AUDO MAX)
––PRO-SIL™ SafeTlib (AURIX™)
››Security Driver
––SHE+ driver
Hardware
Libraries
Configuration
tools
Microcontroller
abstraction drivers
Applications driver
Safety driver
System software
(services, OS, communication,
memory manager etc.)
Security driver
Application software
HW
Operation software
Appl. software
Software
Via 3rd parties
Focus areas
››System software
››Configuration tool
––DAVE™
››Libraries
––DSP library
››Tools
––MemTool etc.
15
Infineon AUTOSAR MCAL drivers
MC-ISAR product overview
Application layer
AUTOSAR runtime environment (RTE)
Communication
services
Memory
services
AUTOSAR runtime environment
(RTE)
I/O hardware
Communication
abstraction Communication
Memory
SPI
MCU WDG GPT
CAN
LIN
FLS
MCALSPI
LIN
CanTrcv
PORT DIO
CAN
Microcontroller
Ethernet
FLS
FEE
I/O hardware
abstraction
Communication
abstraction
Memory
abstraction
Complex device
driver
abstraction
services
CanTrcv
FlexRay
MCU WDG GPT
services
Ethernet
Memory
On-board
abstraction
device
System services
abstraction
FEE
On-board
device
abstraction
Application layer
FlexRay
System services
MCAL
Infineon MC-ISAR Drivers (MicroController Infineon Software ARchitecture)
ICU
PWM ADC
PORT DIO
ICU
Complex device
driver
UART MSC DMA
FLS
bootloader
etc. FLS
Complex
UART
DMA
PWM ADCMCAL
MSC Driver
Enabled via Partners
bootloader
etc.
MCAL Complex Driver
Microcontroller
Infineon MC-ISAR Drivers (MicroController Infineon Software ARchitecture)
Enabled via Partners
MC-ISAR
MicroController – Infineon Software ARchitecture
MC-ISAR:
MCU, WDG, GPT, SPI, PORT, DIO, ICU, PWM, ADC
MC-ISAR COM Basic: MC-ISAR
CAN, CanTrcv, LINMicroController – Infineon Software ARchitecture
MC-ISAR:
MC-ISAR COM Enhanced:
FlexRay, EthernetMCU, WDG, GPT, SPI, PORT, DIO, ICU, PWM, ADC
MC-ISAR COM Basic:
CAN, CanTrcv, LIN
MC-ISAR MEM:
FLASH, FEE
MC-ISAR COM Enhanced: FlexRay, Ethernet
MC-ISAR CD:
UART,
MSC,
DMA,
FLSLoader
MC-ISAR MEM:
FLASH, FEE for AURIX™
MC-ISAR DEMOCD: MC-ISAR
HSSL,
SMU,
IOM forforAURIX™
CD: SENT, I2C, STM,
UART,DS-ADC,
MSC, DMA,
FLSLoader
AURIX™as demo code
MC-ISAR DEMOCD:
HSSL, SENT, I2C, STM, DS-ADC, SMU, IOM for AURIX™ as demo code
››Supported AUTOSAR releases and devices
––V2.0: AUDO NG (TC1796, TC1766 )
––V2.1, V3.0: XC2287, AUDO Future
(TC1797, TC1767), AUDO S
––V3.1, V3.2: XC2000, AUDO MAX
––V4.03: AUDO MAX
––V3.2, V4.03: AURIX™
––ISO 26262 support
››Complex driver for non-standardized
modules (for TriCore™)
››CMM L3 process
››AUTOSAR BSW suite via partners:
elektrobit, vector, KPIT, ETAS
››Delivery packages include: source code, user manual,
Tresos configuration tool
Documented product
release
Easy to use
Standardized driver
Compatibility and reduced
time-to-market
Qualified release
Compliant with CMM L3,
lower development cost
Free evaluation version
From sales contact
16
MC-ISAR
Efficient implementation
Lowest resource
consumption
Application independence
From chassis through body
to powertrain
Development support
Emulation device
››Emulation devices (ED) are a very powerful solution
for calibration, measurement, rapid prototyping and
debugging
››Emulation logic and RAM are added next to the unchanged Production Device (PD) part on the same chip
››Cost-optimized PD, feature-rich ED
››Same package for ED and PD and minimum or no additional external circuitry allows highly cost-optimized ECU
design
››Proven solution with broad tool support by leading
automotive and debug tool vendors
AURIX™ highlights
››Up to 2 Mbyte RAM for calibration with same access speed
as on-chip flash
››Automotive measurement bandwidth (XCP) 15/30 Mbyte/s
via regular 2/3-pin DAP interface
Trace and measurement
Today’s vehicles are designed to meet rising market demands for engine performance, engine responsiveness,
torque, drivability, fuel economy and emissions. Infineon’s
proven Multicore Debug Solution (MCDS) enables manufacturers to design and optimize features to support these
automotive trends. Unique MCDS features include the fully
time-aligned parallel trace of many different on-chip sources and its highly powerful trigger capabilities.
Multicore Debug Solution (MCDS)
Key features
››Tracing of CPUs, busses, performance events and
peripheral internal states
››Real-time, cycle-accurate and in parallel
››Up to 1 Mbyte on-chip trace RAM (40 Gbit/s bandwidth)
››Very powerful trigger capabilities
››No additional pins needed besides the DAP interface
››New Compact Function Trace (CFT) mode for continuous
program trace via DAP
››New fine-grained data trace qualification for automotive
measurement
17
AURIX™ starter and application kits
Infineon Technologies AG starter kits – 32-bit microcontrollers
Triboards
Infineon Tricore™ family starter kits are powerful evaluation systems that enable evaluation and development well
before the target hardware is available. They offer a solid
platform for both hardware and software engineers to evaluate and prototype designs that are closely aligned with
their final applications.
Application kits
To simplify the development of your own application, the
kit comes with a variety of on-board components, including
a highly integrated software development environment
that gives you everything you need to compile, debug, and
flash your AURIX™ multicore application.
System application kits
The system application kits provide a quick jump-start to
typical microcontroller applications such as motor
control, radar etc. These reference design kits provide
faster design-in support for end applications by providing a
reference board, application software, tooling and
documentation.
www.infineon.com/AURIX-kits
18
ACT– AURIX™ configuration tool
ACT is a powerful tool that helps engineers to jump-start
programming of Infineon microcontrollers.
GUI
Pinning data
Driver config. data
Key feature
››Altium TASKING VX TriCore™ lite version
including build-in
––AURIX™ pin mapping incl. interactive package view
––AURIX™ iLLD (Low-Level Driver)
––AURIX™ OSEK
Free TriCore™ entry tool chain
This free of charge tooling entry tool chain provides all
required features to develop and test software for TriCore™
and AURIX™. The tool can be used with all available TriCore™
and AURIX™ starter kits and application boards.
OS config. data
Generation of configuration files
Driver files
+ OS
Various configuration .c and .h files
Selected drivers source files
OS Source files
Key features
››Eclipse based IDE
››Project wizard to easy define the project properties for
device and board support
››High-performance GNU C compiler
››Integrated source level debugger
››On-chip flash programming support
For further information on TriCore™ Tools, please visit: www.infineon.com/tricore-tools
Preferred Design Houses (PDH)
Optimized open-market customer support set up for systems using AURlX™, including software and other Infineon products
such as power products, sensor products and modules. They are trained to provide application- and product-specific support.
››1
level customer support ensuring
Infineon products/solutions
››Technical interface and support
to the customer
››Driving design @ customer
››Basic training for design teams @ customer
››24 h response time to the customer
››Project management & project-specific
››Software testing
››Support of project-specific
st
Classic
(Free of charge)
Premium
(Consultancy mode)
To be agreed between
customers and PDH
application support
››Specification of general SW architecture,
defining required layers, control and
data flow structure etc.
››Specification and implementation of
custom device drivers
››Optimization of software components
with regard to speed/code size
functional safety engineering
››Project-specific support of
security solution
››Safety support
››Security support
››Multicore support
Design houses:
For more information, please visit: www.infineon.com/pdh
19
AURIX™ for powertrain applications
Energy efficiency for
combustion engine vehicles
Electronic automotive components are key to raising fuel
efficiency levels and cutting emissions. The latest environment protection agency standards – Euro 5 and Euro 6 for
passenger cars and Euro 3 and Euro 4 for motorcycles – are
driving developments in advanced engine management.
TriCore™ based products can be found in improved combustion technologies such as Homogeneous Charge Compression Ignition (HCCI) as well as in direct injection, smart
turbocharger and valve actuation applications. They are
also ideal for a range of innovative transmission technologies such as Double Clutch Transmission (DCT) and modern
Continuous Variable Transmission (CVT).
Driving hybrid and electrification
While excelling in fuel economy, being fun-to-drive and
reducing CO2 emissions, Hybrid Electric Vehicles (HEV) and
Electric Vehicles (EV) have the drawbacks of higher cost,
limited drive-range and safety concerns (e.g. risk of battery
over-charging). TriCore™ products, with their high performance, functional integration and application-based
SW support, are the ideal solution for (H)EV motor drives.
TriCore™ offers less than 3% CPU load at 300 MHz frequen-
20
cy, for the complete Field-Oriented Control (FOC) algorithm. TriCore™ AURIX™ family offers multicore architecture, allowing inverter control, hybrid torque management
and DC/DC conversion to be done within one single microcontroller. Nevertheless, the TriCore™ AURIX™ family has
built-in resolver functionality, saving customers the cost of
implementing an external resolver IC.
Often seen as master micro in battery balancing topology,
the TriCore™ AURIX™ family proposes a 32-bit standby
domain combined with an integrated 8-bit standby controller, essential for battery balancing under low power mode
(e.g. holiday parking). Infineon is market leader in offering
Hardware Security Module (HSM), a feature that prevents
the main CPU from illegal manipulation, making the billing
for battery charging more trustworthy.
AURIX™ security hardware
Infineon’s AURIX™ 32-bit microcontroller family offers a
wide portfolio of compatible devices, with embedded
Hardware Security Module (HSM), which offer cost-efficient
solutions for all typical automotive security applications.
Hardware Security Module (HSM)
HSM provides a secure computing platform, consisting of
a 32‑bit CPU, special access-protected memory for storing
the cryptographic key and the unique subscriber identifiers,
a hardware accelerator for the state-of-the-art AES-128 encryption that can be operated in different modes and specific hardware for generation of random numbers. A firewall
separates HSM from the rest of AURIX™ microcontroller.
››A highly flexible and programmable solution
››AES-128 HW accelerator matching performance for
automotive protocols
››Crypto- and Algorithm Agility by software
››AIS31 compliant True Random Number Generator (TRNG)
with high random entropy over lifetime
Customer benefits
››Secure platform – HSM provides a secure platform, separated from the rest of the microcontrollers by a firewall,
thereby creating a trusted execution environment.
››Security standard compliance – AURIX™ HSM fulfills SHE
HIS and Evita Medium standards as well as provide some
additional functionalities.
››Backward compatibility – AURIX™ security solutions are
backward compatible to security SHE HIS implementations in previous TriCore™ based microcontroller families.
››Security differentiation - customized secure OEM or Tier1
crypto apps can be processed within trusted HSM execu-
tion environment and therefore allow independent HSM
specific SW code review in reference to the huge application host SW from multiple parties. This helps to harden
the security level by reliably avoiding potential security
backdoors.
››Convergence of security and safety – AURIX™ microcontrollers address both functional safety as well as IT-security requirements, making sure those are properly integrated and not conflicting with one another.
››Secure process – Infineon can provide a secure personalization flow. 1st personalization step usually happens
at the Tier1, where initial HSM SW and optional transportation key(s) are injected to the ECU. 2nd personalization
step happens at the OEM, where a car specific Individual
key(s) are injected. AURIX™ HSM offers device specific,
individual random read-only key. Read-only key can be
used for injected keys and make them invisible for the
application SW layer.
››Secure failure analysis – for the purpose of preventing
unpermitted debug access, AURIX™ HSM offers 256-bit
password for debugger access protection. It is possible
to create car specific debugger password, which can be
stored in OEM/Tier1 data base or generated by secret
algorithm. Destructive debugger entry functionality
opens debugger access but initiates a persistent destructive action – device gets inoperable in native ECU car
environment.
21
AURIX™ for
powertrain applications
Gasoline direct injection
Application example
Engine management
Safety system supply
Battery (KL30)
Key (KL15)
StByLDO
µC-LDO
Ref-LDO
Com-LDO
Typical partitioning for GDI discrete & solenoid
Tracker 1
Tracker 2
UV/OV/error-monitoring
4x
QSPI
60x
SAR
Fuel level
TLE4997/98
32-bit
Multicore/Lockstep
MCU
AURIX™
e.g. TC27xT
4 MB/200 MHz
Swirl/tumble flap
TLE4997/98
Throttle position
TLE4998S
6x DS
Temperature
sensor(s)
Barometric pressure
KP23x, KP25x
Manifold air pressure
KP21x, KP22x, KP27x1)
SENT
Knock sensor(s)
PSI5
In-cylinder pressure
sensors
GTM
Lambda sensor
Ethernet
HSSL
E-Ray
2x
MSB
4x
CAN
ASCLIN
CAN
TLE7250G
…
FlexRay
TLE9221SX
…
4x
15 A pk.
4x
3/10 A
H-bridge for throttle
TLE8209-2SA
8 A ch.
General purpose
H-bridge
TLE9102SG
5 A ch.
H-bridge for EGR
TLE9102SG
5 A ch.
LS-switch Flex
PWM, current sense
Flex02
TLE8102SG
LS-switch Flex8
On-off outputs
TLE8108EM
2x 5/9 A
8x 0.5 A
4x 2.6 A
Crankshaft
TLE502x/492x
Camshaft
TLE4986
OptiMOS™
IPG20N10S4L-35A
IPD20N06S4L-14
Low-side ignition
GDI driver
HSM
5 V/0.2 A
3.3 V or 5 V/0.6 A
3.3 V or 5 V/10 mA
5 V/0.15 A
Pedal position
TLE4997/98
EGR-throttle position
TLE4997/98
Safe state
controller
TLF35584
5 V/0.15 A
5 V/0.15 A
Window/Q&Awatchdog
LIN
TLE7259-3GE
2 ch.
LS-switch Flex
PWM outputs
Flex18
TLE8718SA
2x 2.6 A
4x 1.7 A
2x 1 A
Powertrain CAN
1) In development
Ignition plugs
Solenoid
injectors
(eGas) throttle
Turbo charger
waste gate
EGR throttle
O2
Relays
Solenoid
VVT
Solenoid
Relays
MIL
Lamp
The new TriCore™ family AURIX™ with state-of-the-art safety features enables systems to achieve the highest safety level
up to ASIL-D. The scalable AURIX™ family includes the GTM, the de-facto industry standard timing module that supports
highly complex engine management, while meeting the market’s most stringent emissions regulations.
Application features
››Direct injection
››Scalable software-based knock detection
››Variable valve control
››Throttle and EGR control
››Turbo charging
››Catalyst after treatment
››Start/stop system
Suggested products
››TC27x – TriCore™ 32-bit microcontroller
››TC26x – TriCore™ 32-bit microcontroller
22
System benefits
››Microcontroller with best-in-class real-time performance
››Scalable platform – performance, memory size and I/Os
››Committed to reduce CO2 by 20%
››Anti-theft protection and tuning protection
››Increased knock detection accuracy via DS-ADC
››Enhanced communication (Ethernet)
››Dedicated peripherals for powertrain
AURIX™ for
powertrain applications
Gasoline multi-port injection – discrete solution
Application example
Engine management
Safety system supply
Battery (KL30)
Key (KL15)
StByLDO
µC-LDO
Ref-LDO
Com-LDO
Tracker 1
Tracker 2
Typical partitioning for up to 6 cyl.
MPI w. discrete "Flex"
UV/OV/error-monitoring
5 V/0.2 A
3.3 V or 5 V/0.6 A
3.3 V or 5 V/10 mA
2x 5 V/0.05 A
Safe state
controller
TLF35584
5 V/0.15 A
5 V/0.15 A
Sensor supply
TLE4250-2
5 V/0.15 A
Window/Q&Awatchdog
Safety watchdog
CIC61508
Ignition driver
Pedal position
TLE4997/98
4x
QSPI
EGR-throttle position
TLE4997/98
50x
SAR
Fuel level
TLE4997/98
Swirl/tumble flap
TLE4997/98
Throttle position
TLE4998S
3x DS
Temperature
sensor(s)
32-bit
Multicore/Lockstep
MCU
AURIX™
e.g. TC26xD
2.5 MB/200 MHz
5 A ch.
General purpose
H-bridge
TLE9102SG
5 A ch.
H-bridge for throttle
TLE8209-2SA
8 A ch.
LS-switch Flex8
On-off outputs
TLE8108EM
Manifold air pressure
KP21x, KP22x, KP27x1)
SENT
Knock sensor(s)
PSI5
In-cylinder pressure
sensors
Ethernet
HSSL
E-Ray
2x
MSB
5x
CAN
2x 5/9 A
4x 0.5 A
LS-switch Flex
PWM outputs
Flex18
TLE8718SA
ASCLIN
Camshaft
TLE4986
Powertrain CAN
Turbo charger
waste gate
(eGas) throttle
O2
Relays
MPI injectors
2x 2.6 A
Canister purge
valve
EGR-throttle
2x 1 A
LIN
TLE7259-3GE
EGR
4x 2.6 A
4x 1.7 A
Crankshaft
optional VR
CAN
TLE7250GVIO
Ignition plugs
VVT
GTM
Lambda sensor
Crankshaft
TLE502x/492x
General purpose
H-bridge
TLE9102SG
LS-switch Flex
PWM, current sense
Flex2
TLE8102SG
Barometric pressure
KP23x, KP25x
4x
15 A pk.
2 ch.
Swirl/tumble
flap
Relays
MIL
Lamp
1) In development
The new TriCore™ family AURIX™ with state-of-the-art safety features enables systems to achieve the highest safety level
up to ASIL-D. The scalable AURIX™ family includes the GTM, the de-facto industry standard timing module that supports
highly complex engine management, while meeting the market’s most stringent emissions regulations.
Application features
››Gasoline port injection
››Scalable software-based knock detection
››Throttle and EGR control
››Catalyst after treatment
››Start/stop systems
››Cost-optimized for entry segment
System benefits
››Scalable platform – performance, memory size and I/Os
››Single voltage supply (EVR)
››Focus on reducing CO2
››Easy migration from ultra low-end to mid-range
applications
››Best tool/partner support for all development phases
within V-cycle
Suggested products
››TC265 – TriCore™ 32-bit microcontroller
››TC264 – TriCore™ 32-bit microcontroller
23
AURIX™ for
powertrain applications
Diesel direct injection
Application example
Engine management
Safety system supply
Battery (KL30)
Key (KL15)
StByLDO
µC-LDO
Ref-LDO
Typical partitioning for DDI discrete
Com-LDO
Tracker 1
Tracker 2
UV/OV/error-monitoring
HSM
5 V/0.2 A
3.3 V or 5 V/0.6 A
3.3 V or 5 V/10 mA
5 V/0.15 A
Pedal position
TLE4997/98
EGR-throttle position
TLE4997/98
Safe state
controller
TLF35584
5 V/0.15 A
5 V/0.15 A
Window/Q&Awatchdog
6x
QSPI
84x
SAR
Fuel level
TLE4997/98
32-bit
Multicore/Lockstep
MCU
AURIX™
e.g. TC29xT
8 MB/300 MHz
Swirl/tumble flap
TLE4997/98
Throttle position
TLE4998S
10x DS
Temperature
sensor(s)
Barometric pressure
KP23x, KP25x
Manifold air pressure
KP21x, KP22x, KP27x1)
SENT
Knock sensor(s)
PSI5
In-cylinder pressure
sensors
GTM
Lambda sensor
CAN
TLE7250G
…
6x 8 A
Fast IGBT
e.g. IHD04N60RA/
IDH06N60RA
6x 8 A
H-bridge for throttle
TLE8209-2SA
8 A ch.
General purpose
H-bridge
TLE9102SG
5 A ch.
H-bridge for EGR
TLE9102SG
5 A ch.
LS-switch Flex
PWM, current sense
Flex02
TLE8102SG
Ethernet
HSSL
2x
E-Ray
3x
MSB
6x
CAN
ASCLIN
LS-Switch Flex8
On-off outputs
TLE8108EM
FlexRay
TLE9221SX
…
2x 5/9 A
4x 0.5 A
4x 2.6 A
LS-switch Flex
PWM outputs
Flex18
TLE8718SA
Crankshaft
TLE502x/492x
Camshaft
TLE4986
PROFET™
BTS500x0-1EGA
BTS500x0-1TMA/B
BTS500x0-1TEA/B
LIN
TLE7259-3GE
2 ch.
2x 2.6 A
Glow plugs
Piezo injectors
(eGas) throttle
Turbo charger
waste gate
EGR throttle
O2
Relays
Solenoids
VVT
Solenoid
4x 1.7 A
2x 1 A
Relays
MIL
Lamp
1) In development
Powertrain CAN
The new TriCore™ family AURIX™ with state-of-the-art safety features enables systems to achieve the highest safety level
up to ASIL-D. The scalable AURIX™ family includes the GTM, the de-facto industry standard timing module that supports
highly complex engine management, while meeting the market’s most stringent emissions regulations.
Application features
››Direct injection (piezo/magnetic)
››In-cylinder pressure measurement
››Hardware-supported security enhancements
››Throttle and EGR control
››Turbo charging
››Diesel particulate filter
››‘Blue’ after-treatment support (e.g. urea-based SCR)
Suggested products
››TC29x – TriCore™ 32-bit microcontroller
››TC27x – TriCore™ 32-bit microcontroller
24
System benefits
››Microcontroller with best-in-class real-time performance
››Scalable platform – performance, memory size and I/Os
››Committed to reduce NOx and particulate matter in line
with Euro 6 standard
››Hardware-supported IP/anti-theft protection and tuning
protection
››Increased accuracy with in-cylinder pressure sensing via
DS-ADC
››Enhanced communication (Ethernet)
››Dedicated peripherals for powertrain
AURIX™ for
powertrain applications
Automatic transmission – hydraulic control
Application example
9-speed automatic transmission
Safety system supply
Battery (KL30)
Key (KL15)
StByLDO
µC-LDO
Ref-LDO
Com-LDO
Typical partitioning for constant current control
Tracker 1
Tracker 2
UV/OV/error-monitoring
84x
ADC
PRNDL switches
TLE4964
Tap up / tap down
switches
Temperature
censor
Low-side driver
6x
QSPI
High-side driver
PROFET ™ family
BTS6133D
32-bit MCU
Multicore/Lockstep
AURIX™ MCU
Output shaft speed
TLE4951/54
Hill hold
TLE4998C3
5 V/0.2 A
3.3 V or 5 V/0.6 A
3.3 V or 5 V/10 mA
HSM
Input shaft speed
TLE4951/54
Safe state
controller
TLF35584
5 V/0.15 A
5 V/0.15 A
5 V/0.15 A
Window/Q&Awatchdog
1x
1x
Vehicle speed out
Solenoid supply
10x
DS
LS-switch Flex
multi-channel
TLE8104
Constant current
control
TLE82453SA
3x 1.2 A
SENT
Variable force
solenoid/
proportional valve
Constant current
control
TLE82453SA
3x 1.2 A
Variable force
solenoid/
proportional valve
4x 2 A
ON/OFF solenoids
PSIS
Ethernet
HSSL
2x
E-Ray
3x
MSB
6x
CAN
ASCLIN
GTM
or
TLE8242-2L
&
3x IPG20N06S4L-26
TLE9250SJ1)
Powertrain
FlexRay
FlexRay
TLE9221SX
CAN
TLE7250G
Diagnostic/instrumentation CAN
LIN
TLE7259-3GE
Diagnostic/
instrumentation
1) In development
The new TriCore™ family AURIX™ with state-of-the-art safety features enables systems to achieve the highest safety level
up to ASIL-D. The rich scalability of the AURIX™ family permits a platform approach that meets the needs of a range of
transmission system demands. Furthermore, the hot temperature package and bare die solutions enable AURIX™ to be
used in both attached and integrated control units.
Application features
››Smooth gear shifting
››Closely coupled with engine control via high-speed
CAN/CAN-FD/FlexRay link
››Support of four 3-phase DC-brushless E-drives
››TC270: high microcontroller junction bare die
temperature
››TC275/TC277: extended ambient temperature range to
meet harsh environment requirements
System benefits
››Improved and fast clutch control
››Supports Safety Level up to ASIL-D
››Security module HSM to prevent tampering
››Hot bare die supports modular temperature-optimized
TCU design
››Hot bare die capabilities enable microcontrollers to be
placed wherever they are needed in the system
››Scalable product offering ensures perfect fit for
individual application needs
Suggested products
››TC29x – TriCore™ 32-bit microcontroller
››TC27x – TriCore™ 32-bit microcontroller
››TC270 – Bare die TriCore™ 32-bit microcontroller
25
AURIX™ for
powertrain applications
Dry double clutch transmission – hydraulic control
Application example
7-speed double clutch transmission
Safety system supply
Battery (KL30)
Key (KL15)
StByLDO
µC-LDO
Ref-LDO
Typical partitioning for constant current control
Com-LDO
Tracker 1
Tracker 2
UV/OV/error-monitoring
HSM
60x
ADC
5 V/0.2 A
3.3 V or 5 V/0.6 A
3.3 V or 5 V/10 mA
Input shaft speed
TLE4953/54
Output shaft speed
TLE4953/54
Safe state
controller
TLF35584
5 V/0.15 A
5 V/0.15 A
5 V/0.15 A
Window/Q&Awatchdog
High-side driver
PROFET ™ family
4x
QSPI
LS-switch Flex
multi-channel
TLE8104
32-bit MCU
Multicore/Lockstep
AURIX™
Hill hold
TLE4998C3
1x
Solenoid supply
4x 2 A
ON/OFF solenoids
PRNDL switches
TLE4964
6x
DS
Constant current
control
TLE82453SA
3x 1.2 A
Variable force
solenoid/
proportional valve
Shift position sensor
TLE4997E2
Constant current
control
TLE82453SA
3x 1.2 A
SENT
Variable force
solenoid/
proportional valve
System pressure
Clutch pressure
PSIS
GTM
Temperature
sensor
Ethernet
HSSL
E-Ray
2x
MSB
4x
CAN
ASCLIN
or
TLE8242-2L
&
3x IPG20N06S4L-26
High-current
half bridge
BTN89xx
M
Hydraulic pump
TLE9250SJ1)
Powertrain
FlexRay
FlexRay
TLE9221SX
CAN
TLE7250G
Diagnostic/instrumentation CAN
LIN
TLE7259-3GE
Diagnostic/
instrumentation
1) In development
The new TriCore™ family AURIX™ with state-of-the-art safety features enables systems to achieve the highest safety level
up to ASIL-D. The rich scalability of the AURIX™ family permits a platform approach that meets the needs of a range of
transmission system demands. Furthermore, the hot temperature package and bare die solutions enable AURIX™ to be
used in both attached and integrated control units.
Application features
››Ultra-fast gear switching
››Closely coupled with engine control via
high-speed CAN/CAN-FD/FlexRay link
››Support of four 3-phase DC-brushless E-drives (dry-DCT)
››High microcontroller junction bare die temperature
Suggested products
››TC275 – TriCore™ 32-bit microcontroller
››TC270 – Bare die TriCore™ 32-bit microcontroller
26
System benefits
››Improved fast clutch control
››Supports safety level up to ASIL-D
››Feature set optimized for wet and dry DCT designs
››Continuous torque on wheels ensures a sportive driving
experience
››Hot bare die capabilities enable microcontrollers to be
placed directly where they are needed in the system
››Hot bare die supports modular temperatureoptimized TCU designs
AURIX™ for
powertrain applications
Dry double clutch transmission – electrical control
Application example
7-speed double clutch transmission
Safety system supply
Battery (KL30)
Key (KL15)
StByLDO
µC-LDO
Ref-LDO
Com-LDO
Typical partitioning for constant current control
Tracker 1
Tracker 2
UV/OV/error-monitoring
Shift position sensor
TLE4997/98
HSM
60x
SAR
5 V/0.2 A
3-phase
driver IC
TLE718xx
M
Rotor position
iGMR sensor
TLE5012B
1st
clutch
4x
QSPI
32-bit MCU
Multicore/Lockstep
AURIX™
Temperature
sensor
Rotor position
iGMR sensor
TLE5009
TLE5012B
3.3 V or 5 V/0.6 A
3.3 V or 5 V/10 mA
PRNDL switches
TLE4964/66
Battery (KL30)
Key (KL15)
Safe state
controller
TLF35584
5 V/0.15 A
5 V/0.15 A
5 V/0.15 A
Window/Q&Awatchdog
3-phase
driver IC
TLE718xx
M
Rotor position
iGMR sensor
TLE5012B
2nd
clutch
6x
DS
SENT
PSIS
GTM
Ethernet
HSSL
E-Ray
2x
MSB
4x
CAN
ASCLIN
TLE9250SJ1)
Powertrain
FlexRay
FlexRay
TLE9221SX
CAN
TLE7250G
LIN
TLE7259-3GE
3-phase
driver IC
TLE718xx
M
Rotor position
iGMR sensor
TLE5012B
Even
gears
3-phase
driver IC
TLE718xx
M
Rotor position
iGMR sensor
TLE5012B
Odd
gears
OptiMOS™-T2 40V
24x IPD90N04S4-04
Diagnostic/instrumentation CAN
Diagnostic/
instrumentation
1) In development
The new TriCore™ family AURIX™ with state-of-the-art safety features enables systems to achieve the highest safety level
up to ASIL-D. The rich scalability of the AURIX™ family permits a platform approach that meets the needs of a range of
transmission system demands. Furthermore, the hot temperature package and bare die solutions enable AURIX™ to be
used in both attached and integrated control units.
Application features
››Ultra-fast gear switching
››Closely coupled with engine control via high-speed
CAN/CAN-FD/FlexRay link
››Support of four 3-phase DC-brushless E-drives (dry-DCT)
››High microcontroller junction bare die temperature
Suggested products
››TC275 – TriCore™ 32-bit microcontroller
››TC270 – Bare die TriCore™ 32-bit microcontroller
System benefits
››Improved fast clutch control
››Supports safety level up to ASIL-D
››Feature set optimized for wet and dry DCT designs
››Continuous torque on wheels ensures a sportive driving
experience
››Hot bare die capabilities enable microcontrollers to be
placed directly where they are needed in the system
››Hot bare die supports a modular temperatureoptimized TCU design
››Infineon e-motor driver
27
AURIX™ for
powertrain applications
Integrated (H)EV control
Application example
Hybrid electric control
32-bit
Multicore/Lockstep
MCU
AURIX™
Transmission
FD
4x CAN
Diverse
Lockstep core
PMSM
A
N
PWM
PWM
1x FlexRay
GTM
PWM
EiceSIL™
driver IC
IGBT
hybrid pack
1 or 2
B
S
C
1x Ethernet
DC/DC converter
Trigger
PWM
ADC
Diverse
Lockstep core
200 MHz
CPU1
8x
SAR-ADC
Resolver
200 MHz
CPU0
Motor control
hybrid domain control
DC/DC converter
resolver speed & position
PWM generation
space vector
modulation
Synchronized 3-phase
current measurement
Resolver interface
200 MHz
CPU2
Speed
&
position
6x
DS-ADC
The inverter controls the electric motor via an electric drivetrain. It resembles the Engine Management System (EMS)
in vehicles with an internal combustion engine. It is seen as a key component in determining (H)EV drive behavior. The
inverter captures energy released through regenerative braking and feeds this back to the battery. As a result, the range of
the vehicle is directly related to the efficiency of the inverter. A safe, highly efficient inverter control system is crucial to the
quality of driving.
Application features
››Multicore & lockstep architecture
››DS-ADC-enabled direct resolver-to-microcontroller
››Superior performance
››Customized PWM pattern generation
Suggested products
››TC29x – TriCore™ 32-bit microcontroller
››TC27x – TriCore™ 32-bit microcontroller
28
System benefits
››ISO 26262 ASIL-C/D compliant
››No resolver IC needed, lower system cost
››Enables sub-system integration
(driving HCU + inverter + DC/DC)
››Fine motor tuning
AURIX™ for
powertrain applications
(H)EV battery management system
Application example
ASIC
#6
32-bit
Multicore/Lockstep
MCU
AURIX™
SPI
IBCB
ASIC
#5
SPI
FD
IBCB
ASIC
#4
2.5MB Flash
240KB RAM
SPI
4x CAN
IBCB
Diverse
Lockstep core
1x FlexRay
ASIC
#3
GTM
4x QSPI
1x I2C
SPI
200 MHz
CPU0
IBCB
ASIC
#1
PWM
PWM
SPI
IBCB
ASIC
#2
PWM
200 MHz
CPU1
SAR-ADC
SPI
-200 V
+200 V
8-bit
standby
controller
DS-ADC
The battery management system controls the battery state during charging and discharging. Intelligent functionality is
needed to extend the battery lifetime, which has a considerable impact on the total cost of ownership. The State of Health
(SoH), State of Charge (SoC) and Depth of Discharge (DoD) of the battery is permanently monitored.
Application features
››Multicore & lockstep core architecture
››Fast communication interface
››Integrated low-power 8-bit standby controller
››HW Security Module (HSM)
System benefits
››ISO 26262 compliant
››Ring topology in event of failure
››Balancing & monitoring over long parking period
››Charge-billing verification
Suggested products
››TC27x – TriCore™ 32-bit microcontroller
››TC26x – TriCore™ 32-bit microcontroller
29
AURIX™ for
safety applications
AURIX™ for safety applications
AURIX™ made for safety
The AURIX™ architecture ISO 26262 compliant process
is designed to efficiently meet ASIL-D on an application
level. The platform uses up to 2 cores in TriCore™ diverse
lockstep core technology, a diverse lockstep architecture
combined with cutting-edge safety technology, such as
safe internal communication buses or distributed memory
protection system. Innovative encapsulation techniques
allow the integration of software with various safety levels
(QM to ASIL-D) from different sources, thereby significantly
reducing system complexity. Thanks to this optimized approach, multiple applications and operating systems (such
as steering, braking, airbag and advanced driver assistance
systems) are seamlessly hosted on an unified platform.
This leads to productivity gains of up to 30%, resulting in a
smaller development outlay and reduced time-to-market
for our customers.
Furthermore, Infineon extends the microcontroller safety
roadmap with devices dedicated to the Advanced Driver
Assistance System (ADAS) segment, such as radar or camera applications. Innovation has been focused on system
partitioning in order to further integrate system functionality and consequently reduce the complexity and area,
providing our customers with highly optimized solutions.
The new devices include high‑ speed interfaces, integrated
hardware acceleration and enhanced ECU validation and
instrumentation tools. All ADAS devices support ISO 26262
safety methodology, meaning that they can be involved in
automatic decisions to assist drivers, such as emergency
braking.
AURIX™ made for scalability
Thanks to its market-leading expertise, Infineon has translated customer demands for individual scalability into
a universal product roadmap. Designed to optimize its
customers’ investment, the AURIX™ family comes with a
comprehensive range of fully modular components, thereby ensuring long-term design flexibility. The devices range
in the ultra high-end from a 300 MHz triple-core device
with 8 MB of embedded Flash to a 200 MHz triple core with
4 MB of embedded Flash to a 200 MHz dual-core device
with 2.5 MB of embedded Flash right down to 130 MHz and
80 MHz single-core and single-core lockstep devices with
1.5 MB, 1 MB and 0.5 MB of embedded Flash. The package
portfolio includes a BGA-516 package with a ball-compatible BGA-292 package (I/O subset), and compatible QFP‑176,
QFP-144, QFP‑100 to QFP-80 packages.
31
AURIX™ for
safety applications
Chassis domain control
Application example
+12 V from battery
4x
Steering angle
sensor
Wheel speed
sensor
2x iGMR
sensor
TLE5012B
Wheel speed
sensor
TLE4941/42
TLE4943(AK)
TLE5041 (GMR)
Steering
angle
Safety system supply
StBy- µC-LDO Ref-LDO Com-LDO Tracker 1
LDO
Tracker 2
Chassis
domain
controller
UV/OV/error-monitoring
Window/Q&Awatchdog
VSens
Safe state
controller
TLF35584
VTx
VMCU
WD
4x speed
Chassis CAN-bus
Vehicle
stability control
ECU
Electric
power steering
ECU
Steering
toque
Torque sensor
TLE4997/98(D)
TLE4906
CAN
transceiver
TLE7250G
TLE6251D
TLE9250SJ1)2)
32-bit
Multicore
Lockstep
MCU
AURIX™
2–4x
X
Y
Z
Pos. sensor
Linear hall
TLE4997/98
TLE2012B
Inertia
sensors
Position
Sensor
interface
ωx
ωy
Vehicle level
1) In development
2) CAN FD support
FlexRay
transceiver
TLE9221SX
TLE9222PX1)
ωz
FlexRay
The new TriCore™ family AURIX™ with state-of-the-art safety features enables systems to achieve the highest safety level
ASIL-D, which is already required in contemporary domain control systems. The latest diverse lockstep technology with
clock delay (diverse lockstep core) reduces the software overhead significantly and enables fast time-to-market. Thanks
to a scalable multicore system and innovative encapsulation techniques, this supports the integration of software with
mixed-criticality levels from different sources, thereby allowing multiple applications and operating systems to be seamlessly hosted on an unified platform.
Application features
››TriCore™ DSP functionality
››Best-in-class performance: triple TriCore™
with up to 300 MHz per core
››Supporting floating point and fix point with all cores
››Up to 2.7 MB of internal RAM
››Communication peripherals: CAN, LIN, FlexRay, Ethernet
››Innovative single supply 5 V or 3.3 V
››External memory interface
››ISO 26262 conformance to support
safety requirements up to ASIL-D
››Availability of AUTOSAR 4.x
32
System benefits
››Advanced communication with FlexRay and Ethernet
››Highest available performance with integrated FPU
››Flexible DMA unit
››Scalability over Flash, RAM and peripherals
››Proven safety concept to support ISO 26262
››Innovative supply concept leads to best‑in‑class
power consumption
Suggested products
››TC29x
››TC27x
AURIX™ for
safety applications
Electric Power Steering (EPS)
Application example
+12 V from battery
Safety system supply
StBy- µC-LDO Ref-LDO Com-LDO Tracker 1
LDO
Tracker 2
UV/OV/error-monitoring
Window/Q&Awatchdog
VSens
Torque sensor
TLE4997/98(D)
TLE4906
Safe state
controller
TLF35584
VTx
Steering
torque
WD
VMCU
32-bit
Multicore
Lockstep
MCU
AURIX™
Electric
power steering
ECU
FlexRay
transceiver
TLE9221SX
TLE9222PX1)
1) In development
2) CAN FD support
3-phase
driver IC
TLE7183
TLE7185
TLE7189
TLE9180
family
M
Rotor position
iGMR sensor
TLE5009/12B
TLE5309
Current sense
(shunt substitute)
TLE4997/98
CAN
transceiver
TLE7250G
TLE6251D
TLE9250SJ1) 2)
FlexRay
OptiMOS™-T2
8x IPLU300N04S4-R7
Rotor position/current sense
HS-CAN
The new TriCore™ family AURIX™ with state-of-the-art safety features enables systems to achieve the highest safety level
ASIL-D, which is already required in contemporary steering systems.
The latest diverse lockstep technology with clock delay (diverse lockstep core) reduces the software overhead significantly
and enables fast time-to-market.
Its rich scalability meets a variety of different electric power steering system demands.
Application features
››Flash 512 KB–8 MB
››Performance from 133 MHz–3x 300 MHz
››Ta = -40 °C … 145 °C
››Dedicated peripheral set: LIN, CAN, SPI, FlexRay , Ethernet
››Advanced timer unit for totally flexible PWM generation
and hardware input capture
››Redundant flexible 12-bit ADC
››Hardware SENT interface for low CPU load
››Hardware-focused safety concept for reduced SW
overhead
››Safety software: Infineon SafeTcore library
››ISO 26262 conformance to support
safety requirements up to ASIL-D
››Availability of AUTOSAR 4.x
System benefits
››Scalability over Flash, RAM and peripherals offering the
best cost-performance ratio
››Serves all kinds of EPS systems, such as column or
belt drive
››Proven safety concept to support ISO 26262
››Innovative supply concept leads to best‑in‑class power
consumption
Suggested products
››TC26x
››TC23x
››TC22x
33
AURIX™ for
safety applications
Active suspension control system
Application example
+12 V from battery
Suspension
control ECU
Safety system supply
StBy- µC-LDO Ref-LDO Com-LDO Tracker 1
LDO
Tracker 2
UV/OV/error-monitoring
Window/Q&Awatchdog
VSens
VTx
Safe state
controller
TLF35584
VMCU
WD
+12 V
4-channel
LS-switch IC
TLE8104E
4x
+12 V
2–4x
Pos. sensor
Linear Hall
TLE4997/98
TLE2012B
6-channel
LS-switch IC
TLE6232GP
32-bit
Multicore
Lockstep
MCU
AURIX™
Vehicle
level
6x
+12 V
Quad constant
current
control IC
TLE7242G
Vehicle level
1) In development
2) CAN FD support
HS-CAN
FlexRay
transceiver
TLE9221SX
TLE9222PX1)
Octal constant
current
control IC
TLE8242-2L
Valve
solenoid
Proportional
valve solenoid
4x
N 4x IPD25N06S4L-30
or
2x IPG20N06S4L-26
+12 V
CAN
transceiver
TLE7250G
TLE6251D
TLE9250SJ1)2)
Valve
solenoid
Proportional
valve solenoid
8x
N 8x IPD25N06S4L-30
or
4x IPG20N06S4L-26
FlexRay
The new TriCore™ family AURIX™ with state-of-the-art safety features enables systems to achieve the highest safety level
ASIL-D, which is already required in contemporary suspension systems.
The latest diverse lockstep technology with clock delay (diverse lockstep core) reduces the software overhead significantly
and enables fast time-to-market.
The scalability supports an optimized fit in order to meet different OEM specifications.
Application features
››TriCore™ DSP functionality
››Best‑in‑class performance: triple TriCore™
with up to 300 MHz per core
››Supporting floating point and fix point with all cores
››Communication peripherals: CAN, LIN, FlexRay, Ethernet
››Innovative single supply 5 V or 3.3V
››Wide range of packages from 80-pin – 516-pin
››ISO 26262 conformance to support
safety requirements up to ASIL-D
››Availability of AUTOSAR 4.x
34
System benefits
››Scalability over Flash, RAM and peripherals offering the
best cost-performance ratio
››Proven safety concept to support ISO 26262
››Innovative supply concept leads to best‑in‑class power
consumption and saves external component costs
Suggested products
››TC27x
››TC26x
››TC23x
››TC22x
AURIX™ for
safety applications
Advanced airbag system
Application example
HS-CAN
FlexRay
CAN
transceiver
TLE7250G
TLE6251D
TLE9250SJ1)2)
FlexRay
transceiver
TLE9221SX
TLE9222PX1)
Reversible belt
pretensioners
LIN
Pressure sensor
KP108
LIN
transceiver
32-bit
Multicore
Lockstep
MCU
AURIX™
Airbag SBC
TLE8771/72
KP200
ADXL15X
ADXL15X
Door Pressure sensor
KP108
PSI5
satellite
sensor
interface
On-board sensors
yaw
mid-g XY
low-g xyz
4/8
channels
Vsat
Vboost
Vlogic
KP200
Pressure sensor
KP108
Squib
Squib
Squib
Squib
Squib
Squib
Squib
Squib
Squib
Squib
driver
Squib
Squib
8/12
channels
Squib
Squib
Squib
Squib
Squib
Squib
Squib
Squib
Squib driver
8 channels
TLE8758
Sensor SPI bus
Pedestrian protection sensoric
Door Pressure sensor
KP108
Squib
Firing SPI bus
KP201
Airbag ECU
Arming
Saving
engine
DC sensor
interface
Power supply
2 buck, boost, linear
watchdog, reset
KP201
1) In development
2) CAN FD support
Lamp
driver
Buckle Switch
TLE4976
Buckle switch
TLE4976
Warning lamp
Airbag off
+12 V from battery
The new TriCore™ family AURIX™ with state-of-the-art safety features enables systems to achieve the highest safety level
up to ASIL-D.
The scalability allows the selection of a single-core solution for basic airbag systems and multicore solutions for airbag
systems with an integrated sensor cluster. The best cost-performance fit is offered by the wide range of Flash, performance
and peripheral options available within the AURIX™ family.
Application features
System benefits
››Scalability over Flash, RAM and peripherals offering the
best cost-performance ratio
››Proven safety concept to support ISO 26262
››Innovative supply concept leads to best‑in‑class power
consumption
overhead
››Safety software: Infineon SafeTcore library
››ISO 26262 conformance to support
safety requirements up to ASIL-D
››Availability of AUTOSAR 4.x
Suggested products
››TC23x
››TC22x
››TC21x
››Scalable MCU family from single to multicore
››Flash 512 KB–8 MB
››Embedded EEPROM
››Performance from 133 MHz–3x 300 MHz
››Dedicated peripheral set: CAN, LIN, SPI, FlexRay, Ethernet
››Hardware-focused safety concept for reduced SW
35
AURIX™ for
safety applications
Braking
Application example
ABS/VSC ECU
3x MOSFET
IPD15-N06S2L-64
Braking system IC
Multiple
supply control
w. reset
generation
Window/signature
watchdog
supervision
safety logic
4x
Wheel speed sensor
TLE4941/42
TLE4943(AK)
TLE5041 (GMR)
Wheel speed
sensor supply
&
signal
conditioning
SPI
32-bit
Multicore
Lockstep
MCU
AURIX™
MOSFET
IPB80N06S2-H5
Safety MOSFET
driver
MOSFET
IPD50N06S4-09
K-line
transceiver
Sensor
custer
(ESC only)
M
Solenoid
Solenoid
Solenoid
driver
2x
TLE6217
Solenoid
Solenoid
Solenoid
Solenoid
Solenoid
High voltage
outputs
High voltage
enable outputs
Pump
Pump MOSFET
driver
Solenoid
Solenoid
CAN
transceiver
TLE7250G
TLE6251D
TLE9250SJ1)2)
HS-CAN
FlexRay
transceiver
TLE9221SX
TLE9222PX1)
Solenoid
driver
TLE6217
FlexRay
ESC
only
Solenoid
Solenoid
Solenoid
1) In development
2) CAN FD support
The new TriCore™ family AURIX™ with state-of-the-art safety features enables systems to achieve the highest safety level
ASIL-D, which is already required in contemporary braking systems. The latest diverse lockstep technology with clock
delay (diverse lockstep core) reduces the software overhead significantly and enables fast time-to-market. The scalability
supports an optimized cost-performance fit for basic ABS systems up to highly-integrated ESC systems.
Application features
››Scalable MCU family with diverse lockstep
››Flash 512 KB–8 MB
››Performance from 133 MHz–3x 300 MHz
››Hardware-focused safety concept for reduced SW
overhead
››SENT interface for low CPU load
››Safety software: Infineon SafeTcore library
››ISO 26262 conformance to support
safety requirements up to ASIL-D
››Availability of AUTOSAR 4.x
36
System benefits
››Scalability over Flash, RAM, performance and peripherals
leads to an optimized cost-performance fit
››Proven safety concept to support ISO 26262
validated by 3rd party
››Innovative supply concept leads to best‑in‑class power
consumption and saves external component costs
Suggested products
„„
TC29x
„„
TC27x
„„
TC26x
„„
TC23x
„„
TC22x
AURIX™ for
safety applications
Multi-purpose camera configuration
Application example
+12 V from battery
Safety system supply
StBy- µC-LDO Ref-LDO Com-LDO Tracker 1
LDO
Tracker 2
UV/OV/error-monitoring
Window/Q&Awatchdog
VSens
Safe state
controller
TLF35584
VTx
WD
VMCU
e.g. Aptina OmniVision
CIF
CIF
I2C
Automotive
high
dynamic
range camera
32-bit
Multicore/Lockstep
MCU
AURIX™
HSSL
CAN
transceiver
TLE7250G
TLE6251D
TLE9250SJ1)2)
FlexRay
transceiver
TLE9221SX
TLE9222PX1)
Acquisition RAM
Optional
“Number cruncher”
e.g. for
pedestrian
detection
HS-CAN
FlexRay
Ethernet transceiver
1) In development
2) CAN FD support
Multi-purpose
camera ECU
Optional
The new TriCore™ family AURIX™ will enhance classic safety features with dedicated features to cater for multi-purpose
camera systems.
The combination of new features, such as a picture pre-processing unit, camera interface, DSP functionality and increased
SRAM, in conjunction with outstanding safety features enables a high level of scalability in order to achieve the best
cost-performance ratio.
Application features
››TriCore™ DSP functionality
››Best-in-class performance: triple TriCore™
with up to 300 MHz per core
››Supporting floating point and fix point with all cores
››Up to 2.7 MB of internal RAM for picture
information storage
››Picture pre-processing unit
››Camera interface up to 100 MHz
››Innovative single supply 5 V or 3.3 V
››External memory interface
››ISO 26262 conformance to support
safety requirements up to ASIL-D
››Availability of AUTOSAR 4.x
System benefits
››High scalability option allows a dedicated performance
feature fit for multiple camera applications from single
automatic high beam systems up to multi-function systems (lane departure warning, forward collision warning,
traffic sign recognition, pedestrian recognition etc.)
››High integration leads to reduced complexity
››Support for ISO 26262 decisions such as
emergency braking
››Innovative supply concept leads to best‑in‑class
power consumption
Suggested products
››TC29xTA
37
AURIX™ for
safety applications
Short-range radar (24 GHz) system
Application example
+12 V from battery
Safety system supply
TLE8366
Regulator
StBy- µC-LDO Ref-LDO Com-LDO Tracker 1
LDO
Tracker 2
UV/OV/error-monitoring
Window/Q&Awatchdog
3.3 v/600 mA
Targets
VSens
Coarse
Y
Y
Fibne
Tx1
Y
Y
Y
VTx
Optional
DAC/PLL
Tx2
200MHz
input timer
BGT24ATR12
Y
TLF35584
Rx1
WD
Safe state
controller
VMCU
32-bit
Multicore
Lockstep
MCU
AURIX™
SPI
Acquisition
RAM
4x
ADCs
FFT
engine
Rx2
LPF +
LNA es
Rx3
BGT24AR2
Rx4
CAN
transceiver
TLE7250G
TLE6251D
TLE9250SJ1)2)
24GHz radar
1) In development
2) CAN FD support
HS-CAN
FlexRay
transceiver
TLE9221SX
TLE9222PX1)
FlexRay
The new TriCore™ family AURIX™ will enhance classic safety features with dedicated features to serve the needs of
24 GHz radar systems.
The combination of new features and increased SRAM, in conjunction with outstanding safety features, enables a high
level of integration and reduction of complexity.
Application features
››Up to 752 KB RAM for radar image storage
››Radar signal processing with windowing functionality
››Flexibility in radar signal acquisition
with 4x internal ADCs
››Possibility to connect external ADCs
(interface to connect up to 16-bit ADCs)
››High-precision input timers
››High-precision output timers for DAC
››Innovative single supply 5 V or 3.3 V
››ISO 26262 compliance to support
safety requirements up to ASIL-D
››Availability of AUTOSAR 4.x
38
System benefits
››High integration leads to significant cost savings
››High integration leads to reduced complexity
››ISO 26262 compliance supports safe input for functions
such as emergency braking
››Innovative supply concept
Suggested products
››TC23xLA
››TC26xDA
››TC29xTA
AURIX™ for
safety applications
Long-range radar (76/77 GHz) system
Application example
+12 V from battery
Safety system supply
TLE8366
preregulator
TLS208
POST
TLS208
POST
Targets
TLS208
POST
StBy- µC-LDO Ref-LDO Com-LDO Tracker 1
LDO
Tracker 2
UV/OV/error-monitoring
Window/Q&Awatchdog
VSens
Tx1
Y
Tx2
Y
RTN7735PL
76/77 GHz
transmitter
& local oscillator
RCC1010
wave form
generator
TLF35584
VTx
SPI
WD
Safe state
controller
VMCU
32-bit
Multicore/Lockstep
MCU
AURIX™
FFT
Y
Rx1
Y
Y
Rx4
RRN7745PL
quad channel
76/77 GHz
receiver
AFE
CIF
Y
CAN
transceiver
TLE7250G
TLE6251D
TLE9250SJ1)2)
76-77GHz proximity radar ECU
1) In development
2) CAN FD support
HS-CAN
Acquisition
RAM
FlexRay
transceiver
TLE9221SX
TLE9222PX1)
FlexRay
The new TriCore™ family AURIX™ will enhance classic safety features with dedicated features to serve the needs of
77 GHz radar systems.
The combination of new features and increased SRAM, in conjunction with outstanding safety features, enables a high
level of integration and reduction of complexity.
Application features
››TriCore™ DSP functionality
››Best-in-class performance: triple TriCore™
with up to 300 MHz per core
››Up to 2.7 MB RAM for radar image storage
››Radar signal processing with windowing functionality
››Flexibility in radar signal acquisition with 4x internal ADCs
››Possibility to connect external ADCs
(interface to connect up to 16-bit ADCs)
››High-precision input timers
››High-precision output timers for DAC
››Innovative single supply 5 V or 3.3 V
››External memory interface
››ISO 26262 compliance to support
safety requirements up to ASIL-D
››Availability of AUTOSAR 4.x
System benefits
››High integration leads to significant cost savings
››High integration leads to reduced complexity
››ISO 26262 compliance supports safe input for functions
such as emergency braking
››Innovative supply concept leads to best‑in‑class power
consumption
Suggested products
››TC26xDA
››TC29xTA
39
AURIX™ for
connectivity applications
AURIX™ for connectivity
applications
Connectivity electronics systems embrace a broad variety of applications inside
the car, covering comfort, safety and security as well as high-performance computing and in-vehicle networking. This leads to the key strengths of the AURIX™
family:
››AUTOSAR – With AUTOSAR 4, multicore architectures can be easily designed
into vehicles. Infineon is one of the first implementers of a multicore architecture with AURIX™ ready for AUTOSAR 4.x. Furthermore, Infineon also provides
the MCAL drivers developed according to the CMM 3 level.
››Power consumption – Innovative supply concept automatically adapts the
power consumption to the actual performance requirements. Furthermore,
the new trend of pretended networking and ECU degradation is actively supported.
››Enhanced communication – As cars incorporate an increasing amount of
electronics, the body electronics module’s responsibilities increase to handle
the additional components and message traffic. Because of the gateway functionality of the BCM, the AURIX™ has enhanced communication capabilities to
support communication between CAN FD, LIN, FlexRay™ and Ethernet buses.
››Safety – The trend is toward the integration of safety targets in the require-
ments of advanced body systems such as lighting, BCM etc. To achieve the
required ASIL level according to ISO 26262, AURIX™ has the capability to cover
targets up to the highest safety integrity level ASIL-D.
››Security – In the future, the need for a high level of security will also expand
into body applications. Cars are expected to hold even more information
as they become smart cards on wheels for simplifying financial transactions at
gas pumps, charging stations, parking lots, toll booths, drive-through shops
and more. The vehicle will act as a smart card and pay your fee/fare – sometimes automatically. Hardware-based security is more robust than software-only security. AURIX™ provides a dedicated module, HSM (Hardware
Secure Module), to cover the highest level of security.
41
AURIX™ for
connectivity applications
Telematics control unit for over-the-air updates
Application example
Battery (KL30/31)
Backup battery
Buck converter
Power
Management
Circuit (PMIC)
Safety system supply
TLF35584
eUICC2)
SLI 97
RF
switchs
GPS
LNA3)
RF
transceiver
LTE / 3G
LNA3)
Antenna
tuner
Mute
button
Emergency
call button
32-bit
Lockstep
MCU
AURIX™
Airbag
I/F
SPI
Application
processor
&
modem
Flash
Audio
codec
Audio
amp.
HSM
TLE9250SJ1)
CAN
TLE7250G
Vehicle network
GNSS
Wifi
SRDAM
Key
I/F
LED
I/F
RF diodes / transistors
Cellular
ETH
Phy
Mic.
Mic.
Spk.
1) In development
2) Universal integrated circuit card
(embedded SIM)
3) Low Noise Amplifiers
Head unit
The telematics control unit connects the car to the outside world and thereby enables numerous new applications and
functionalities. Software in different ECUs can be updated remotely, to either add new features or remove any software
bugs that might be found during operation. This reduces the number of recalls and related costs and increases customer
satisfaction. The possibility of adding new features opens up the door for new business models and revenue streams.
Application features
››eCall
››Remote diagnostics
››Payment systems
››Software update
››Feature upgrades
››Internet services
››etc.
Application features
››TC23x – TriCore™ 32-bit microcontroller
––Superior Hardware Security Solution (HSM) + functional
safety up to ASIL-D (e.g. eCall, V2x communication,
software update of safety-critical ECUs)
––Automotive & consumer interfaces
(incl. CAN/-FD, FlexRay, Ethernet etc.)
––Highly scalable product portfolio
(starting with 2 MB & QFP-100 at the lowest end)
System benefits
››System supplies, bock converter, active antenna supplies etc.
››Secure elements (eUICC, OPTIGA™ TPM 2.0, SLI 97 V2X etc.)
››RF switches, RF diodes/transistors, low-noise amplifiers (GPS, LTE etc.)
››Silicon microphone
42
AURIX™ for
connectivity applications
High-feature body control module with
integrated gateway functionality
Application example
Left
front-light control
Right
front-light control
PROFET™ – single, dual, quad channel high-side driver
SPOC – SPI based multichannel high-side driver family
I/O
LIN bus
TLE7259-2GE
TLE7258LE
TLE7269G
CAN bus
TLE7250G
TLE6251-3G
TLE6251D
+12 V from
battery
TLF35584
SPI
TLE7250G
TLE6251-3G
TLE6251D
SPIDER
SPI based
multichannel
high-/low-side
driver
TC1.6P
+
Diverse Lockstep core
TLE9221SX
TC1.6E
32-bit
Multicore/Lockstep
MCU
AURIX™
I/O
CAN bus
Relays
Communication
FlexRay
Ethernet
PHY
HITFET™
low-side
driver
Interior light
Logic signals on VBAT Level
e.g. switched VBAT rails
Ambient
LEDs
Basic LED
current sources
for LED
applications
Supply
Ethernet
LEDs
SPI
Interior
LEDs
I/O
SPI
PROFET™ – single, dual, quad channel high-side driver
SPOC – SPI-based multichannel high-side driver family
Left
rear-light control
Right
rear-light control
Body Control Module (BCM) application comprising internal and external lighting systems, as well as control of relays and voltage
rails and further comfort functions such as door and wiper control. The central gateway manages all internal interfaces (i.e. motor
management, in-car entertainment, dashboard or convenience control) and communication with external interfaces for after-sales
software updates. The AURIX™ multicore concept enables the integration of two applications in one device, e.g. BCM and gateway.
Application features
››Scalable MCU family from single to multicore
››Encapsulation feature allows software development
without interference for multiple applications
››Embedded EEPROM
››Advanced communication peripherals:
CAN, LIN, SPI, FlexRay, Ethernet
››ISO 26262 conformance to support safety requirements
up to ASIL-D
››Availability of AUTOSAR 4.x
System benefits
››Enables pretended networking and ECU degradation
››High integration leads to significant cost savings
››High integration leads to reduced complexity
››ISO 26262 compliance supports ASIL requirements
››Innovative supply concept leads to best-in-class power
consumption
Suggested products
››TC29x
››TC23x
››TC22x
››TC21x
43
AURIX™ for
transportation applications
TriCore™ for transportation applications
optimized with scalable AURIX™ family
44
AURIX™ is Infineon’s brand new family of microcontrollers
serving exactly the needs of the 24 V–60 V industry in terms
of performance, memory, scalability, safety and security.
While supporting high performance, the innovative supply
concept with integrated DC/DC converter leads to best-in
class power consumption.
Its innovative multicore architecture supports the latest
trends in connectivity, such as Ethernet and CAN FD as well
as safety (IEC 61508/ISO 25119/ISO 26262) and security.
The scalable AURIX™ family leads to the most optimized
cost-performance application fit.
AURIX™ for
transportation applications
Commercial and Agricultural Vehicles (CAV)
A 24 V complete system solution for hydraulic/pneumatic management systems: power supply, sensors, microcontroller
and high-side switches can be used without external protection in a 24 V system. Valves and pumps can be driven via linear
activation or demand-controlled via PWM signals.
Hydraulic management system
+24 V
BTT6050-2EKA
Pedal
TLE4253
Inlet
TLE4271
TLE4990
Inlet
VBAT
+
-
OUT
BTT6030-1EKA
32-bit
Multicore
Lockstep
MCU
AURIX™
BTT6050-2EKA
Outlet
Pump
TLE7250G1)
TLE6251DS1)
Suggested products
››TC23x
››TC22x
››TC21x
Reservoir
CAN bus
Chassis
System benefits
››Valves and pumps can be driven
via linear activation or demandcontrolled via PWM signals
››Quad and dual channels are
optimized to reduce costs and
space for these applications
››Pin-to-pin and software compatibility
››ISO 26262, ASIL D/SIL 3 compliant
››AECQ-100
1) If ECU permanently supplied, you may need to add external protection against load dump 400 ms above 40 V.
Pneumatic management system
+24 V
BTT6050-2EKA
Pedal
TLE4253
Inlet
TLE4271
TLE4990
Inlet
VBAT
+
-
OUT
BTT6030-1EKA
32-bit
Multicore
Lockstep
MCU
AURIX™
BTT6050-2EKA
Compressor
pump
TLE7250G1)
TLE6251DS1)
Chassis
CAN bus
1) If ECU permanently supplied, you may need to add external protection against load dump 400 ms above 40 V.
Outlet
System benefits
››Valves and pumps can be driven
via linear activation or demandcontrolled via PWM signals
››Quad and dual channels are
optimized to reduce costs and
space for these applications
››Pin-to-pin and software compatibility
››ISO 26262, ASIL D/SIL 3 compliant
››AECQ-100
Suggested products
››TC23x
››TC22x
››TC21x
45
AURIX™ for industrial applications
High-performance, multicore and safetydemanding applications
Providing security and functional safety
The AURIX™ 32-bit microcontroller family is based on the
Infineon TriCore™ high-performance core concept and
provides a very high scalability family from single core to
multi core.
In a global economy, IP protection and secure communication plays an increasingly important role. This demand
is accounted for by the integration of special security
modules providing the required means of safe key storage,
along with secure boot and encryption on the hardware
level. As one of the leaders in functional safety, Infineon has
designed the TriCore™ MCUs to meet the growing demand
for functional safety in the industrial market as specified
in IEC 61508. Via our cooperation partner Hitex, Infineon
offers a complete package comprising a microcontroller,
safety supply with integrated watchdog TLF35584, software
and documentation, achieving safety integrity levels up to
SIL3.
The AURIX™ family enabling highest integrated safe
memory sizes (SRAM up to 2.7 MB and flash memory up
to 8 MB) and all memory is protected by hardware Error
Correction Code (ECC). The devices reach more than 600
DMIPS at clock rates of up to 300 MHz and combine MCU &
DSP instructions with an integrated FPU.
The integrated peripheral set is primarily targeted toward
motor control and power conversion providing up to 11
ADCs, DS ADCs and a full set of diverse high-performance
timers – namely the General Timer Module (GTM), CapCom
6, GPT12. This is one of the very few in the industry that is
able to drive the upcoming three-level inverter topologies.
Furthermore the AURIX™ family supports the latest connectivity like Ethernet, CAN FD, Flexray and multiple other high
speed interfaces.
46
The next generation of TriCore™-based microcontrollers –
AURIX™ – will provide another significant performance
milestone by integrating up to three cores in one device.
The multicore concept is targeted at running concurrent
applications in parallel. Some of the integrated cores
integrate lockstep functionality and the peripherals can
be allocated to individual cores. This allows running a
combination of safety-critical tasks, such as controlling
an inverter, with non-critical tasks, such as network
communication, on a single MCU.
AURIX™ for
industrial applications
Mobile controller
Application example
Safety system supply
StByLDO
µC-LDO
Ref-LDO
Com-LDO
UV/OV/error-monitoring
Window/Q&Awatchdog
TLF35584
CAN transceiver
TLE62xx
Tracker 1
Tracker 2
> 50x PWM
4x FREQ
Safe state
controller
CAN
GTM
CCU6
ADC
SDRAM
EBU
Low-side switch
TLE6244
MSC
Application features
››Closed-loop control of solenoid currents
››Multitasking to drive hydraulic and electric actuators
››IEC 61131-3 support
››Tasking/Green Hills/GNU(Hightec)/windriver toolchain
››Ready for harsh environments
››IEC 61508 support - Integrity Level (SIL) 1 to 3
Suggested products
››TC26xD – TriCore™ 32-bit microcontroller
››TC27xT – TriCore™ 32-bit microcontroller
32-bit MCU
AURIX™
IO
ADC
48x ADC
> 100x GPIO
Condition
monitoring sensor
System benefits
››Scalable family with compatibility: SW, pin-out
››High-speed 200 MHz asymmetric single/dual/triple core
››Up to 50 Pulse-Width-Modulated (PWM) outputs
››Four 12-bit Analog to Digital Converters (SAR-ADC)
››12-bit, up to 60 channels
››DS-ADC converter
››Temperature range up to Ta = 150 °C, Tj = 175 °C
››SAE J1939 supported for up to 6 CAN nodes incl. CAN FD
››64 KB EEPROM
››Innovative single power supply concept
47
AURIX™ for
industrial applications
Inverter
Application example
Safety system supply
StByLDO
µC-LDO
Ref-LDO
Com-LDO
UV/OV/error-monitoring
Window/Q&Awatchdog
TLF35584
PMSM
A
N
IGBT
EconoPIM™
Tracker 1
Tracker 2
Safe state
controller
B
S
C
EiceDRIVER™
PWM
CAN transceiver
TLE62xx
Fieldbus/FPGA/
external memory
CAN
Resolver
SPI
Application features
››Multi-axis controller for two 3-phase complementary
PWMs
››Multiple modulation strategies (SVPWM, DPWM,
soft-PWM, direct torque control) to support requirements
for reduced noise emissions and increased efficiency
››Ready for four Q-inverters, matrix-inverters
››Field-oriented control with less than 10% CPU load
››Multiprocessor support for reliability and safety
››Support for 3-level inverter topologies
››High computing performance up to 3 x 300 MHz
››Up to 2.7 MB internal RAM
48
8x
SAR-ADC
EBU
IO
Suggested products
››TC27xT – TriCore™ 32-bit microcontroller
››TC29xT – TriCore™ 32-bit microcontroller
32-bit MCU
AURIX™
Speed
&
position
6x
DS-ADC
System benefits
››Diverse timer architecture: generic timer module (GTM),
CCU6, GPT12
››8 SAR-ADCs 12-bit resolution, 1 MSPS
››DS-ADC
››Resolver I/F
››Encoder I/F with digital noise filter
››Very fast control loop
››IEC 61508 support – Integrity Level (SIL) 1 to 3
››Innovative single power supply concept
AURIX™ for
industrial applications
Wind turbine inverter
Application example
AC
AC
generator
Inverter
Rectifier
~230 V
PWM
PWM
Blade pitch
control
ADC
Wind
sensor
Application features
››Reliable blade pitch control
››Increased wind turbine efficiency
››Multiple modulation strategies (SVPWM, DPWM,
soft-PWM, direct torque control) to support requirements
for reduced noise emissions and increased efficiency
››Multiprocessor support for reliability and safety
››Support for 3-level inverter topologies
Suggested products
››TC26xD – TriCore™ 32-bit microcontroller
››TC27xT – TriCore™ 32-bit microcontroller
32-bit MCU
AURIX™
ADC
Grid phase
monitoring
System benefits
››Diverse timer architecture: generic timer module (GTM),
CCU6, GPT12
››8 SAR-ADCs 12-bit resolution, 1 MSPS
››DS-ADC
››Resolver I/F
››Encoder I/F with digital noise filter
››IEC 61508 support - Integrity Level (SIL) 1 to 3
››Innovative single power supply concept
49
AURIX™ for
industrial applications
Solar panel
Application example
DC
AC
IGBT
EconoPIM™
~230 V
EiceDRIVER™
Grid phase
monitoring &
synchronization
MPPT
PWM
ADC
Safety system supply
StByLDO
µC-LDO
Ref-LDO
Com-LDO
UV/OV/error-monitoring
Window/Q&Awatchdog
TLF35584
Tracker 1
Tracker 2
32-bit MCU
AURIX™
ADC
Safe state
controller
Application features
››Multi-phase PWM controller for single or multiple strings
››Runs multiple modulation strategies (SVPWM, DPWM,
soft-PWM, direct torque control) to support requirements
for reduced noise emissions and increased efficiency
››Maximum Power Point Tracking (MPPT) to extract
maximum power from solar panels
››Grid phase monitoring and synchronization to ensure
power factor unity
››Current control to avoid disharmonics and to determine
the feed-in refund
››Support for 3-level inverter topologies
System benefits
››Diverse timer architecture: generic timer module (GTM),
CCU6, GPT12
››8 SAR-ADCs 12-bit resolution, 1 MSPS
››DS-ADC
››Resolver I/F
››Encoder I/F with digital noise filter
››IEC 61508 support - Integrity Level (SIL) 1 to 3
››Innovative single power supply concept
››DSP library available
Maximum Power Point Tracking (MPPT)
(Cell temperature: 25 °C)
Power [W]
Current [A]
Suggested products
››TC26xD – TriCore™ 32-bit microcontroller
››TC27xT – TriCore™ 32-bit microcontroller
Current vs. voltage
Power vs. voltage
0
50
0
Voltage [V]
0
TriCore™ tool partners
Embedded software solutions AUTOSAR suites
Simulation/virtual prototyping
Integrated compiler environments
Auto code generation tools
Timing/scheduling analysis
Operating systems
Debugger and test tools
Data measurement/calibration/rapid prototyping
Programmer/flash tools
Software verification
Training/services
Free tooling
Free TriCore™ Entry Toolchain, MemTool, ACT
51
Feature overview TriCore™ family
263
84/10 DS
Yes
6
4x ASCLIN, 6x QSPI, 3x MSC, 2x I2C, 15x SENT,
HSSL, 5x PSI5, 2x FlexRay, Ethernet
K
LFBGA-516
EVR, STBU, HSM
TC299TP
300
8000
728
FPU
3/1
263
84/10 DS
Yes
6
4x ASCLIN, 6x QSPI, 3x MSC, 2x I2C, 15x SENT,
HSSL, 5x PSI5, 2x FlexRay, Ethernet, CAN FD
K
LFBGA-516
EVR, STBU, HSM
TC298TP
300
8000
728
FPU
3/1
232
60/10 DS
Yes
6
4x ASCLIN, 6x QSPI, 3x MSC, 2x I2C, 15x SENT,
HSSL, 5x PSI5, 2x FlexRay, Ethernet
K
LBGA-416
EVR, STBU, HSM
TC297TA
300
8000
2728
FPU, FFT, 3/1
CIF
169
60/10 DS
No
6
4x ASCLIN, 6x QSPI, 3x MSC, 2x I2C, 15x SENT,
HSSL, 5x PSI5, 2x FlexRay, Ethernet
K
LFBGA-292
EVR, STBU, HSM
TC297TX
300
8000
2728
FPU
3/1
263
60/10 DS
No
6
4x ASCLIN, 6x QSPI, 3x MSC, 2x I2C, 15x SENT,
HSSL, 5x PSI5, 2x FlexRay, Ethernet
K
LFBGA-292
EVR, STBU, HSM
TC297TP
300
8000
728
FPU
3/1
169
60/10 DS
No
6
4x ASCLIN, 6x QSPI, 3x MSC, 2x I2C, 15x SENT,
HSSL, 5x PSI5, 2x FlexRay, Ethernet, CAN FD
K
LFBGA-292
EVR, STBU, HSM
TC277TP
200
4000
472
FPU
3/2
169
60/6 DS
No
4
4x ASCLIN, 4x QSPI, 2x MSC, HSSL, I2C, 10x SENT,
3x PSI5, FlexRay, Ethernet, CAN FD
K
LFBGA-292
EVR, WUT, HSM
TC275TP
200
4000
472
FPU
3/2
112
48/6 DS
No
4
4x ASCLIN, 4x QSPI, 2x MSC, HSSL, I2C, 10x SENT,
3x PSI5, FlexRay, Ethernet, CAN FD
K
LQFP-176
EVR, WUT, HSM
TC267D
200
2500
240
FPU
02/1
169
50/3 DS
No
5
4x ASCLIN, 4x QSPI, 2x MSC, I2C, 10x SENT,
3x PSI5, HSSL, FlexRay, Ethernet, CAN FD
K
LFBGA-292
EVR, STBU
TC265D
200
2500
240
FPU
2/1
112
50/3 DS
No
5
4x ASCLIN, 4x QSPI, 2x MSC, I2C, 10x SENT, HSSL,
3x PSI5, FlexRay, Ethernet, CAN FD
K
LQFP-176
EVR, STBU
TC264DA
200
2500
752
FPU, FFT, 2/1
CIF
88
40/3 DS
No
5
4x ASCLIN, 4x QSPI, 2x MSC, I2C, 10x SENT, HSSL,
3x PSI5, FlexRay, Ethernet, CAN FD
K
LQFP-144
EVR, STBU
TC264D
200
2500
240
FPU
88
40/3 DS
No
5
4x ASCLIN, 4x QSPI, 2x MSC, I2C, 10x SENT, HSSL,
3x PSI5, FlexRay, Ethernet, CAN FD
K
LQFP-144
EVR, STBU
Additional features/
remarks 4)
External bus interface
3/1
Packages
Number of ADC
channels
FPU
Temperature ranges 3)
Timed I/O
GPI/O
2728
CAN/CAN-FD nodes
Cores/lockstep
8000
Co-processor 1)
SRAM (incl. cache)
[KByte]
300
Max clock frequency
[MHz]
TC299TX
Product type
Program memory
[KByte]
Communication interfaces 2)
TriCore™ microcontroller
AURIX™ – family
2/1
TC237LP
200
2000
192
FPU
1/1
120
24
No
6
2x ASCLIN, 4x QSPI, 4x SENT, FlexRay, CAN FD
K
LFBGA-292
EVR, WUT, HSM
TC234LA
200
2000
704
FPU, FFT
1/1
120
24
No
6
2x ASCLIN, 4x QSPI, 4x SENT, FlexRay, Ethernet
K
TQFP-144
EVR, WUT, HSM
TC234LX
200
2000
704
FPU
1/1
120
24
No
6
2x ASCLIN, 4x QSPI, 4x SENT, FlexRay, Ethernet
K
TQFP-144
EVR, WUT, HSM
TC234LP
200
2000
192
FPU
1/1
120
24
No
6
2x ASCLIN, 4x QSPI, 4x SENT, FlexRay, CAN FD
K
TQFP-144
EVR, WUT, HSM
TC233LP
200
2000
192
FPU
1/1
78
24
No
6
2x ASCLIN, 4x QSPI, 4x SENT, FlexRay, CAN FD
K
TQFP-100
EVR, WUT, HSM
TC224L
133
1000
96
FPU
1/1
120
24
No
3
2x ASCLIN, 4x QSPI, 4x SENT
K
TQFP-144
EVR, WUT
TC223L
133
1000
96
FPU
1/1
78
24
No
3
2x ASCLIN, 4x QSPI, 4x SENT
K
TQFP-100
EVR, WUT
TC222L
133
1000
96
FPU
1/1
59
14
No
3
2x ASCLIN, 4x QSPI, 4x SENT
K
TQFP-80
EVR, WUT
TC214L
133
500
96
FPU
1/1
120
24
No
3
2x ASCLIN, 4x QSPI, 4x SENT
K
TQFP-144
EVR, WUT
TC213L
133
500
96
FPU
1/1
78
24
No
3
2x ASCLIN, 4x QSPI, 4x SENT
K
TQFP-100
EVR, WUT
TC212L
133
500
96
FPU
1/1
59
14
No
3
2x ASCLIN, 4x QSPI, 4x SENT
K
TQFP-80
EVR, WUT
1) CIF = Camera and external ADC interface, FFT = Fast Fourier Transform Accelerator, FPU = Floating Point Unit, PCP = Peripheral Control Processor
2) ASC = Asynchronous Serial Channel, ASCLIN = Asyn/Synchronous Local Interconnect Network, HSSL = High Speed Serial Link, I2C = Inter-Integrated Circuit,
LIN = Local Interconnect Network, MLI = Micro Link Interface, MSC = Micro Second Channel, PSI5 = Peripheral Sensor Interface 5, QSPI = Queued Serial Peripheral Interface,
SENT = Single Edge Nibble Transmission, SSC = Synchronous Serial Channel
3) Ambient temperature range: A = -40 ... 140 °C, B = 0 ... 70 °C, F = -40 ... 85 °C, H = -40 ... 110 °C, K = -40 ... 125 °C, L = -40 ... 150 °C, X = -40 ... 105 °C
4) EVR = Embedded Voltage Regulator, HSM = Hardware Security Module, STBU = Stand-by Control Unit, WUT = Wake-Up Timer
www.infineon.com/TriCore
Feature overview
Feature overview TriCore™ family
SRAM (incl. cache)
[KByte]
Co-processor
Digital I/O lines
Number of ADC
channels
Timed I/O channels
(PWM, capture)
External bus interface
CAN nodes
Communication
interfaces
Temperature ranges
Package
ASC
SSC
Additional features /
remarks
66–80
1000
52
FPU
81
32
48
No
2
2x ASC, 1x SSC, 1x MSC, 1x MLI
K
LQFP-176
2x
1x
–
TC1766-192F80HL
80
1500
108
FPU, PCP
81
32
48
No
2
2x ASC, 2x SSC, 1x MSC, 2x MLI
K
LQFP-176
2x
2x
–
TC1796-256F150E
150
2000
256
FPU, PCP
123
44
126
Yes
4
2x ASC, 2x SSC, 2x MSC, 2x MLI
K
BGA-416
2x
2x
–
TC1736-128F80HL
80
1000
48
FPU
70
24
53
No
2
2x ASC, 2x SSC, 1x MSC, 1x MLI
K
LQFP-144
2x
2x
–
TC1767-256F
80–133
2000
128
FPU, PCP
88
36
80
No
2
2x ASC, 2x SSC, 1x MSC, 1x MLI
K
LQFP-176
2x
2x
–
TC1797-512F180E
180
4000
224
FPU, PCP
221
48
118
Yes
4
2x ASC, 2x SSC, 2x MSC, 2x MLI
K
BGA-416
2x
2x
–
TC1724N-192F80HR
80
1500
152
FPU, PCP
95
28
77
No
3
2x ASC, 4x SSC, 1x MSC, 1x MLI
K
LQFP-144
2x
4x
EVR
TC1728N-192F133HR
133
1500
152
FPU, PCP
127
36
94
No
3
2x ASC, 4x SSC, 1x MSC, 1x MLI
K
LQFP-176
2x
4x
EVR
TC1782F-320F180HR
180
2500
176
FPU/PCP
86
36
80
No
3
2x ASC, 3x SSC, 1x MSC, 1x MLI,
2x FlexRay
K
LQFP-176
2x
3x
–
TC1784F-320F180EL
180
2500
176
FPU/PCP
126
36
122
3
2x ASC, 3x SSC, 1x MSC, 1x MLI,
2x FlexRay
K
LFBGA-292
2x
3x
–
TC1791F-512F240EP
240
4000
288
FPU/PCP
144
48
100
4
2x ASC, 4x SSC, 2x MSC, 2x MLI,
8x SENT, 2x FlexRay
K
LFBGA-292
2x
4x
–
TC1793F-512F270EF
270
4000
288
FPU/PCP
221
44
112
4
2x ASC, 4x SSC, 2x MSC, 2x MLI,
8x SENT, 2x FlexRay
K
LBGA-416
2x
4x
–
TC1798F-512F300EP
300
4000
288
FPU/PCP
252
72
138
4
2x ASC, 4x SSC, 2x MSC, 2x MLI,
8x SENT, 2x FlexRay
K
BGA-516
2x
4x
–
Max clock frequency
[MHz]
TC1762-1128F
Product type
Program memory
[kByte]
TriCore™ microcontroller
AUDO – next generation family
AUDO – future family
AUDO MAX – family
ASC= Asynchronous Serial Channel
EVR= Embedded Voltage Regulator
FPU= Floating Point Unit
MSC= Micro Second Channel
MLI= Micro Link Interface
Published by
Infineon Technologies AG
85579 Neubiberg, Germany
© 2016 Infineon Technologies AG.
All Rights Reserved.
Yes
No
Yes
Yes
PCP= Peripheral Control Processor
SDIO = SD Card Interface with Input/Output
SENT= Single Edge Nibble Transmission
SSC= Synchronous Serial Channel
USIC = ASC, SPI, I2C, I2S
K = -40/+125 °C
Please note!
THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND
ANY INFORMATION GIVEN HEREIN SHALL IN NO EVENT BE
REGARDED AS A WARRANTY, GUARANTEE OR DESCRIPTION OF
ANY FUNCTIONALITY, CONDITIONS AND/OR QUALITY OF OUR
PRODUCTS OR ANY SUITABILITY FOR A PARTICULAR PURPOSE.
WITH REGARD TO THE TECHNICAL SPECIFICATIONS OF OUR
PRODUCTS, WE KINDLY ASK YOU TO REFER TO THE RELEVANT
PRODUCT DATA SHEETS PROVIDED BY US. OUR CUSTOMERS AND
THEIR TECHNICAL DEPARTMENTS ARE REQUIRED TO EVALUATE
THE SUITABILITY OF OUR PRODUCTS FOR THE INTENDED
APPLICATION.
WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT AND/OR
THE INFORMATION GIVEN HEREIN AT ANY TIME.
Date: 03 / 2016
Additional information
For further information on technologies, our products, the
application of our products, delivery terms and conditions
and/or prices please contact your nearest Infineon Technologies
office (www.infineon.com).
Warnings
Due to technical requirements, our products may contain
dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office.
Except as otherwise explicitly approved by us in a written
document signed by authorized representatives of Infineon
Technologies, our products may not be used in any life
endangering applications, including but not limited to medical,
nuclear, military, life critical or any other applications where a
failure of the product or any consequences of the use thereof
can result in personal injury.
Where to buy
Infineon distribution partners and sales offices:
www.infineon.com/WhereToBuy
Service hotline
Infineon offers its toll-free 0800/4001 service hotline as one central number,
available 24/7 in English, Mandarin and German.
››Germany ..................... 0800 951 951 951 (German/English)
››China, mainland ........ 4001 200 951 (Mandarin/English)
››India ........................... 000 800 4402 951 (English)
››USA ............................. 1-866 951 9519 (English/German)
››Other countries .......... 00* 800 951 951 951 (English/German)
››Direct access .............. +49 89 234-0 (interconnection fee, German/English)
* Please note: Some countries may require you to dial a code other than “00” to access this international number.
Please visit www.infineon.com/service for your country!
Mobile product catalog
Mobile app for iOS and Android.
www.infineon.com
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2016 Infineon Technologies AG.
All Rights Reserved.
Please note!
THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND
ANY INFORMATION GIVEN HEREIN SHALL IN NO EVENT BE
REGARDED AS A WARRANTY, GUARANTEE OR DESCRIPTION OF
ANY FUNCTIONALITY, CONDITIONS AND/OR QUALITY OF OUR
PRODUCTS OR ANY SUITABILITY FOR A PARTICULAR PURPOSE.
WITH REGARD TO THE TECHNICAL SPECIFICATIONS OF OUR
PRODUCTS, WE KINDLY ASK YOU TO REFER TO THE RELEVANT
PRODUCT DATA SHEETS PROVIDED BY US. OUR CUSTOMERS AND
THEIR TECHNICAL DEPARTMENTS ARE REQUIRED TO EVALUATE
THE SUITABILITY OF OUR PRODUCTS FOR THE INTENDED
APPLICATION.
WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT AND/OR
THE INFORMATION GIVEN HEREIN AT ANY TIME.
Order Number: B158-I0090-V2-7600-EU-EC-P
Date: 03 / 2016
Additional information
For further information on technologies, our products, the
application of our products, delivery terms and conditions
and/or prices, please contact your nearest Infineon Technologies
office (www.infineon.com).
Warnings
Due to technical requirements, our products may contain
dangerous substances. For information on the types in question,
please contact your nearest Infineon Technologies office.
Except as otherwise explicitly approved by us in a written
document signed by authorized representatives of Infineon
Technologies, our products may not be used in any lifeendangering applications, including but not limited to medical,
nuclear, military, life-critical or any other applications where a
failure of the product or any consequences of the use thereof
can result in personal injury.