PX-500 Crystal Oscillator PX-500 Features • • • • • • Applications 9X14 J Leaded Surface Mount Package Reflow Process Compatible ACMOS, TTL, LVPECL and LVDS MIL-PRF-55310 Class B Screening (optional) Frequency Range: 1 MHZ to 800 MHZ Previous Model: C1300 • • • • Military Systems Avionics and Instrumentation Test Equipment Medical Equipment Performance Specifications Parameter Min Typ Max Units Condition 1 Frequency Stabilities vs. operating temperature range (referenced to +25°C) -15 -25 -50 -100 -25 -50 -100 -50 -100 +15 +25 +50 +100 +25 +50 +100 +50 +100 ppm ppm ppm ppm ppm ppm ppm ppm ppm 0… +70°C 0… +70°C 0… +70°C 0… +70°C -40… +85°C -40… +85°C -40… +85°C -55… +125°C -55… +125°C Initial tolerance -15 -25 -50 -100 +15 +25 +50 +100 ppm ppm ppm ppm @+25°C @+25°C @+25°C @+25°C Overall tolerance -20 -25 -50 -100 -25 -50 -100 -65 -100 +20 +25 +50 +100 +25 +50 +100 +65 +100 ppm ppm ppm ppm ppm ppm ppm ppm ppm 0… +70°C 0… +70°C 0… +70°C 0… +70°C -40… +85°C -40… +85°C -40… +85°C -55… +125°C -55… +125°C (Referenced to +25°C) (includes operating temperature and initial accuracy) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Parameter vs. supply voltage change vs. load change vs. aging / 1 year vs. aging / year (following years) Min Typ -2 -1 -3 -1 Max Units Condition +2 +1 +3 +1 ppm ppm ppm ppm VS ± 5% Load ± 5% after 30 days of operation Supply Voltage (Vs) Supply voltage 4.75 5.0 5.25 VDC Supply voltage 3.135 3.3 3.465 VDC Supply voltage 2.375 2.5 2.625 VDC Current consumption (+5 VDC) 15 20 40 mA mA mA ACMOS or TTL 1.0 to 23.9 MHz ACMOS or TTL 24 to 49.9 MHz ACMOS or TTL 50 to 125.00 MHz Current consumption (+3.3 VDC or +2.5 VDC) 6 8 12 16 40 75 100 mA mA mA mA mA mA mA ACMOS 1.0 to 14.9 MHZ ACMOS 15.0 to 39.9 MHZ ACMOS 40.0 to 59.9 MHZ ACMOS 60.0 to 84.9 MHZ ACMOS 85.0 to 125.0 MHZ LVPECL or LVDS No load <200 MHz LVPECL or LVDS No load >200 MHz RF Output ACMOS Signal 15 Load Signal Level (Vol) 50 pF 0.5 .3 .25 VDC VDC VDC with Vs=5.0V and 15pF load with Vs=3.3V and 15pF load with Vs= 2.5V and 15pF load VDC VDC VDC with Vs=5.0V and 15pF load with Vs=3.3V and 15pF load with Vs=2.5V and 15pF load 10 6 3 ns ns ns 1.0 to 23.9 MHz 24.0 to 79.9 MHz 80.0 to 125.0 MHz 55 60 % % @ 50% < 15 MHz @ 50% => 15 MHz 4.5 3.0 2.25 Signal Level (Voh) Rise and fall times for ACMOS (measured 10% to 90%) 45 40 Duty cycle Signal TTL Load 10 pF Signal Level (Vol) 0.5 VDC with Vs=5.0V and 15pF load VDC with Vs=5.0V and 15pF load 5 3 ns ns 1.0 to 23.9 MHz 24.0 to 125 MHz 55 60 % % @ 1.4V < 15 MHz @ 1.4V >= 15 MHz into Vcc-2V or There in Equivalent 4.5 Signal Level (Voh) Rise and fall times for ACMOS (measured 20% to 80%) 45 40 Duty cycle Signal LVPECL Load 50 ohm Vs -1.62 VDC Signal Level (Vol) Vs1.025 Signal Level (Voh) Rise and fall times for ACMOS (measured 20% to 80%) VDC 1000 600 ps ps -40....+85°C operating temp -40....+85°C operating temp < 100 MHz >= 100 MHz Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Parameter Min Typ Max Units Condition 55 % @ 50% Vdd Jitter (rms) 10 0.5 ps ps BW = 10Hz to 20 MHz BW = 12KHz to 20 MHz Period Jitter (pk-pk) 40 ps 10,000 Samples - Rising edge ohm Between outputs 45 Duty cycle LVDS Signal 60 Load 100 140 Signal Level (Vol) 1.2 VDC Signal Level (Voh) 1.4 VDC 240 330 460 mVpeak 1.125 1.2 1.375 V 10 ms 1000 ps measured @ 20% to 80% of Vod 55 % @ 50% of Vod Jitter (rms) 5 1 ps ps BW = 10Hz to 20 MHz BW = 12KHz to 20 MHz Period Jitter (pk-pk) 40 ps 10,000 Samples - Rising edge Differential Voltage (Vod) Common Mode (Offset) Voltage (Vos) Start-up Time 600 Rise \ Fall Time 45 Duty cycle Absolute Maximum Ratings Supply voltage (Vs) 7.0 V Operable temperature range -55 +125 °C Storage temperature range -62 +125 °C with Vs=5.0VDC and 3.3 VDC Additional Parameters Vectron Verification Screening Class B, MIL-PRF-55310, Rev.D Logic “0“ input = Outputs disabled (Tri-state) Logic “1“ or floating input = Outputs enabled) Output Enable Standard (All outputs) Logic “0“ or floating input = Outputs enabled Logic “1“ input = Outputs disabled (Tri-state) Weight < 2 grams Processing & Packing Handling & processing note Standard Environmentals Vibration MIL-STD-202, Method 204, Condition G (30 G, 10Hz-2000Hz) Shock MIL-STD-202, Method 213, Condition I (100 G, 6ms, Sawtooth) Acceleration MIL-STD-883, Method 2001, Condition A (5000 G, Y1 Plane) Temperature Cycling MIL-STD-883, Method 1010, Condition B Thermal Shock MIL-STD-883, Method 107, Condition B Solderability MIL-STD-202, Method 208 Leak Test (Fine and Gross) MIL-STD-883, Method 1014, Condition A1 and C1 Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Outline Drawing / Enclosure Type A (ACMOS or TTL) Code Height “H” Stand-off 0 0.188 (4.77mm) 0.043 (1.09mm) Pin Connections 1 Enable/Disable or N/C 2 Ground (Case) 3 Output 4 Supply Type B (LVPECL or LVDS) Code Height “H” Stand-off 1 0.188 (4.77mm) 0.043 (1.09mm) Pin Connections 1 Enable/Disable or N/C 2 Enable/Disable or N/C (custom number required) 3 Ground (Case) 4 Output 5 Complementary Output 6 Supply Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information PX - 500 0 - A A T - F K X B - 10M0000000 Frequency Product Family PX: PXO Package 9 x 14 mm Screening Option B: “B” Level screening X: No Screening Height 0: A 0.188” 1: B 0.188” Enable Code A: Enable Hi, Tristate C: Enable Lo, Tristate X: No Enable Supply Voltage D: 5 Vdc E: 3.3 Vdc H: 2.5 Vdc Temp. Stability Code D: ±15ppm F: ±25ppm K: ±50ppm S: ±100ppm X: Use with Overall Tolerance Code RF Output Code A: ACMOS B: TTL C: LVPECL D: LVDS Accuracy Code OR Overall Tolerance (Pullability) Code D: ±15ppm E: ±20ppm F: ±25ppm K: ±50ppm S: ±100ppm Temperature Range C: -55°C to +125°C E: -40°C to +85°C T: 0°C to +70°C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Europe: Asia: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 2/5/2009 daf Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com