C5300 VCXO Typical Applications Features Base Stations Test Equipment Telecom & Wireless Infrastructure Digital Switching 9X14 J Leaded Surface Mount Package Reflow Process Compatible Optional ACMOS, TTL and LVPECL Previous Corning Model Numbers MC044, MC344, MC046, MC346, MC047, MC347, MC049, MC349, MC048, MC318, MC328, and MC348 Frequency range 1.0 to 800.0 MHz Standard frequencies 19.44, 32.768, 44.736, 51.84, 77.76, 155.52, 622.08 MHz (ACMOS/TTL available up to 125 MHz. LVPECL frequencies above 220 MHz are achieved through use of PLL or analog multiplier) Frequency stabilities1 Parameter vs. operating temperature range (Referenced to +25°C) Supply voltage change vs. load change vs aging /1 Year vs. aging / year (following Years) Min 0 -45 -2 -1 -5 -1 Typ ±3 Max. +70 +85 Units °C °C Condition +2 +1 +5 +1 ppm ppm ppm ppm VS ± 5% Load ± 5% Condition Ordering Code C-xxx F-xxx 5 Ordering Code 5 Supply voltage (Vs) Parameter Min Typ Max. Units Supply voltage 4.75 5 5.25 VDC 15 mA ACMOS/TTL 1.0 to 23.9 MHZ 20 mA ACMOS/TTL 24 to 49.9 MHz 40 mA ACMOS/TTL 50 to 80.0 MHz LVPECL No load Current consumption Supply voltage 3.135 3.3 SV050 100 mA 3.465 VDC 6 mA ACMOS 1.0 to 14.90 MHZ Current consumption SV033 8 mA ACMOS 15.0 TO 39.9 MHz 12 mA ACMOS 40.0 TO 59.9 MHz 16 mA ACMOS 60.0 TO 79.9 MHz 60 mA ACMOS 80.0 to 125.0 MHz 100 mA LVPECL No load Max. Units RF output Parameter Signal Min Typ ACMOS Load 15 Signal Level (Vol) Signal Level (Voh) Signal Load Vectron International, LLC pF VDC VDC VDC VDC ns ns ns % % 4.5 3.0 Rise and fall times for ACMOS (measured 10% to 90%) Duty cycle 50 0.5 0.3 10 5 3 55 60 45 40 Condition Ordering Code RFA Vs= 5.0V and 15pF load Vs=3.3V and 15pF load Vs= 5.0V and 15pF load Vs=3.3V and 15pF load 1.0 to 23.9 MHz 24.0 to 79.9 MHz 80.0 to 125.0MHz @ 50% Vs< 15 MHz @ 50% Vs > 15 MHz TTL RFT 10 100 Watts Street Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.co m 5 C5300 Signal Level (Vol) Signal Level (Voh) Rise and fall times for TTL (measured 0.8V to 2.0V) Duty Cycle Signal Load Signal Level (Vol) Signal Level (Voh) Start-up Time Rise and fall times (measured @ 20% to 80%) Duty cycle LVPECL 0.5 4.5 45 40 5 3 55 60 PECL/LVPECL 50 Vs -1.62 Vs- 1.025 10 1000 600 55 60 5 1 40 45 40 Jitter (rms) Period Jitter (pk-pk) VCXO VDC Vs= 5.0V and 15pF load VDC ns ns % % Vs= 5.0V and 15pF load 1.0 to 23.9 MHz 24 to 125 MHz @ 1.4V < 15 MHz @ 1.4V > 15 MHz RFP Into Vs-2V or Thevenin Equivalent VDC VDC mS ps ps % % ps ps ps <100 MHz > 100 MHz @ 50% Vdd @ 50% Vdd BW = 10Hz to 20 MHz BW = 12 kHz to 20 MHz 10,000 samples- Rising edge Frequency Tuning (EFC) Parameter Absolute Pull Range Min Typ ±30 Max. Units ppm ±50 Linearity Control Voltage Range Ordering Code AP033 ppm 10 Tuning Slope Condition 15 % AP050 Positive 0.5 0.3 2.5 1.65 4.5 3.0 VDC VDC Min Typ Max. -60 -90 -120 -140 -145 -50 -80 -110 -133 -145 Units dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz g with Vs=5.0VDC with Vs=3.3VDC Additional parameters Parameter 3 Phase Noise Weight Processing & Packing 6 Output Enable Weight Processing & Packing Vectron International, LLC Handling & processing note Logic "0" input = Outputs disabled (Tri-state) Logic "1" or floating input = Outputs enabled) Logic "0" or floating input = Outputs enabled Logic "1" input = Outputs disabled (Tri-state) <2 Handling & processing note 100 Watts Street Mount Holly Springs PA 17065 10 100 1 10 100 10 100 1 10 100 Hz Hz kHz kHz kHz Hz Hz kHz kHz kHz Condition Measured @ 52.00 MHz Measured @ 155.52 MHz ACMOS/TTL Output PECL/LVPECL Output g t 717 486 3411 f 717 486 5920 www.vectron.co m C5300 VCXO Absolute Maximum Ratings Parameter Supply voltage (Vs) Min Operable temperature range Storage temperature range -55 -55 Typ Max. 7.0 7.0 +85 +125 Units V V °C °C Condition Vs=5.0VDC Vs=3.3VDC Enclosures Type A - ACMOS/TTL Package Codes: Code A1 Height H .368 max Type B - ACMOS/TTL Pin Length L 1.09 Code B1 E2 = Enable/Disable pin 2 X = N/C pin 2 Height H .368 max Pin Connections 1 2 3 4 Pin Length L 1.09 Pin Connections Control Voltage Ground (Case) RF Output Supply Voltage 1 2 3 4 5 6 Control Voltage Enable/Disable or N/C Ground (Case) RF Output N/C Supply Voltage Type C - PECL/LVPECL Vectron International, LLC 100 Watts Street Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.co m C5300 VCXO Package Codes: Code C1 E2 = Enable/Disable pin 2 X = N/C pin 2 Height H .368 max Pin Length L 1.09 Pin Connections 1 2 3 4 5 6 Control Voltage Enable/Disable or NC Ground (Case) RF Output Complementary Output Supply Voltage How to Order this Product: Step 1 Use this worksheet to forward the following information to your factory representative: Model Supply Voltage Code Output Code APR Code Package Code Enable/Disable SV050 RFA AP050 A1 E1 C5300 Example C5300 Step 2 The factory representative will then respond with a Corning Model Number in the following Configuration: Model Package Code Dash Dash Number C5300 [Customer Specified Package Code] - [Factory Generated 4 digit number] Typical P/N C5300A1-001 Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 3 Phase noise degrades increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. 6 Contact factory for other options. Vectron International, LLC 100 Watts Street Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.co m