ISL21032 ® Data Sheet September 28, 2009 Precision 0.600V Low Voltage FGA™ References FN6239.2 Features • Reference Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6V The ISL21032 FGA™ voltage references are very high precision analog voltage references specifically designed to meet the rigorous performance requirements of high current, low voltage VRM and POL modules. Fabricated in Intersil's proprietary Floating Gate Analog technology, these references feature guaranteed performance over the -40°C to +130°C operating temperature range. • Initial Accuracy Options @ +25°C ±1.0mV, ±2.5mV, and ±5.0mV • Absolute Accuracy Options Over Operating Temp Range ±0.5% (±3.0mV), ±0.75% (±4.5mV), and ±1.0% (±6.0mV) • Supply Voltage Range . . . . . . . . . . . . . . . . . . 2.7V to 5.5V • Low Quiescent Current . . . . . . . . . . . . . . . . . . . 12µA typ. • Long Term Stability. . . . . . . . . . . . . . . . 10ppm/√1,000Hrs. Additional features include guaranteed absolute accuracy as low as ±0.5% over the operating temperature range of -40°C to +130°C. Long-term stability is 10ppm/√1,000Hrs. • Thermal Hysteresis . . . . . . . . . 100ppm @ ΔTA = +170°C • Source and Sink Current . . . . . . . . . . . . . . . . . . . . . . 7mA The absolute accuracy and thermal performance of the ISL21032 family are an ideal fit for the next generation of high current, low voltage VRM and POL modules. • ESD Protection. . . . . . . . . . . . . 5kV (Human Body Model) Pinout • Pb-Free (RoHS Compliant) ISL21032 (3 LD SOT-23 TOP VIEW) • Standard 3 Ld SOT-23 Packaging • Extended Temperature Range . . . . . . . . . -40°C to +130°C Applications • Low Voltage, High Current VRM and POL Modules • Accurate Reference for Low Voltage DC/DC Converters VIN 1 3 GND VOUT 2 Ordering Information PART NUMBER (Note) PART MARKING VOUT OPTION (V) GRADE TEMP. RANGE (°C) PACKAGE (Pb-free) PKG. DWG. # ISL21032BPH306Z-TK* DEU 0.6 ±0.5%@ DTA = 170°C -40 to +130 3 Ld SOT-23 T&R P3.064 ISL21032CPH306Z-TK* DEV 0.6 ±0.75%@ DTA = 170°C -40 to +130 3 Ld SOT-23 T&R P3.064 ISL21032DPH306Z-TK* APE 0.6 ±1.0%@ DTA = 170°C -40 to +130 3 Ld SOT-23 T&R P3.064 *Please refer to TB347 for details on reel specifications. NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. FGA is a trademark of Intersil Corporation. Copyright Intersil Americas Inc. 2006, 2009. All Rights Reserved All other trademarks mentioned are the property of their respective owners. ISL21032 Absolute Maximum Ratings Thermal Information Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C Max Voltage VIN to GND . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6.5V Max Voltage VOUT to GND (Note 1) ISL21032, VOUT = 0.6V . . . . . . . . . . . . . . . . . . . . . -0.5V to +1.6V Voltage on “DNC” Pins. . . No Connections Permitted to These Pins. ESD Rating Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5kV Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500V Thermal Resistance (Typical, Note 2) θJA (°C/W) 3 Ld SOT-23 Package . . . . . . . . . . . . . . . . . . . . . . . 371.4 Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C Pb-Free Reflow Profile (Note 3). . . . . . . . . . . . . . . . . .see link below http://www.intersil.com/pbfree/Pb-FreeReflow.asp CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty. For guaranteed specifications and test conditions, see Electrical Specifications. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. NOTES: 1. Maximum duration = 10s. 2. θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details. 3. Post-reflow drift for the ISL21032 devices will range from 100µV to 1.0mV based on experimental results with devices tested in sockets and also on FR4 multi-layer PC boards. The design engineer must take this into account when considering the reference voltage after assembly. Electrical Specifications (VOUT = 0.600V) Operating Conditions: VIN = 3.0V, IOUT = 0mA, COUT = 0.001µF, TA = -40 to +130°C, unless otherwise specified. SYMBOL VOUT VOA VOA PARAMETER CONDITIONS MIN Output Voltage VOUT Accuracy @ TA = +25°C VOUT Accuracy Over Op Temp Range (-40° < TA < +130°C) TYP MAX 0.600 UNITS V ISL21032B06 -1.0 +1.0 mV ISL21032C06 -2.5 +2.5 mV ISL21032D06 -5.0 +5.0 mV ISL21032B06 -3.0 +3.0 mV ISL21032C06 -4.5 +4.5 mV ISL21032D06 -6.0 +6.0 mV 2.7 5.5 V 12 25 µA VIN Input Voltage Range IIN Supply Current ΔVOUT/ΔVIN Line Regulation +2.7V ≤ VIN ≤ +5.5V 50 200 µV/V ΔVOUT/ΔIOUT Load Regulation Sourcing: 0mA ≤ ISOURCE ≤ 7mA 20 70 µV/mA Sinking: -7mA ≤ ISINK ≤ 0mA 20 70 µV/mA ΔVOUT/Δt Long Term Stability (Note 6) TA = +25°C 10 ΔVOUT/ΔTA Thermal Hysteresis (Note 4) ΔTA = +170°C 100 ISC Short Circuit Current (Note 5) TA = +25°C, VOUT tied to GND 50 VN Output Voltage Noise 0.1Hz ≤ f ≤ 10Hz 30 ppm/ √1kHrs ppm 80 mA µVP-P NOTES: 4. Thermal Hysteresis is the change in VOUT measured @ TA = +25°C after temperature cycling over a specified range, ΔTA. VOUT is read initially at TA = +25°C for the device under test. The device is temperature cycled and a second VOUT measurement is taken at +25°C. The difference between the initial VOUT reading and the second VOUT reading is then expressed in ppm. For ΔTA = 170°C, the device under is cycled from +25°C to +130°C to -40°C to +25°C. 5. Limits are established by full device characterization over temperature range and are not tested in production. 6. FGA™ voltage reference long term drift is a logarithmic characteristic. Changes that occur after the first few hundred hours of operation are significantly smaller with time, asymptotically approaching zero beyond 2000 hours. Because of this decreasing characteristic, long-term drift is specified in ppm/√1kHr. 2 FN6239.2 September 28, 2009 ISL21032 Typical Performance Curves, ISL21032 Low Voltage Output Reference VIN = 3.0V, IOUT = 0mA, TA = +25°C Unless Otherwise Specified 20 14 18 13 16 14 11 IIN (µA) IIN (µA) +25°C 12 UNIT 3 12 UNIT 2 10 +85°C 10 9 8 UNIT 1 -40°C 8 6 7 4 2 2.5 3.0 3.5 4.0 4.5 5.0 6 2.5 5.5 3.0 3.5 4.0 VIN (V) VIN (V) FIGURE 1. IIN vs VIN (3 REPRESENTATIVE UNITS) 5.5 0.60008 UNIT 2 VOUT (V) 0.6000 UNIT 3 0.5995 0.5990 UNIT 1 0.5985 -40 -15 10 35 60 85 110 (NORMAILIZED TO 0.6V AT VIN = 3V) 0.6005 0.60006 0.60004 UNIT 3 0.60002 0.59998 UNIT 1 0.59996 0.59994 0.59992 2.5 135 UNIT 2 0.60000 3.0 TEMPERATURE (°C) FIGURE 3. VOUT vs TEMP 3.5 4.0 VIN (V) 4.5 5.0 5.5 FIGURE 4. LINE REGULATION 125 DVIN = +0.3V 100 75 50 +85°C +25°C 100mV/DIV VOUT (V) 5.0 FIGURE 2. IIN vs VIN - 3 TEMPS 0.6010 D VO (µV) (NORMALIZED TO VIN = 3.0V) 4.5 25 0 -40°C -25 -50 -75 DVIN = -0.3V -100 -125 2.5 3.0 3.5 4.0 VIN 4.5 5.0 FIGURE 5. LINE REGULATION - 3 TEMPS 3 5.5 1ms/DIV FIGURE 6. LINE TRANSIENT RESPONSE, CL = 0nF FN6239.2 September 28, 2009 ISL21032 Typical Performance Curves, ISL21032 Low Voltage Output Reference VIN = 3.0V, IOUT = 0mA, TA = +25°C Unless Otherwise Specified (Continued) 0 DVIN = +0.3V NO LOAD -10 1nF LOAD -20 CL = 500pF PSRR (dB) 100mV/DIV -30 10nF LOAD -40 -50 100nF LOAD -60 -70 DVIN = -0.3V -80 -90 -100 1 10 100 1ms/DIV FIGURE 7. LINE TRANSIENT RESPONSE, CL = 1nF 1k 10k FREQUENCY (Hz) 100k 1M 10M FIGURE 8. PSRR vs f vs CL 0.6 0.5 0.4 0.2 200mV/DIV ΔVOUT (mV) 0.3 0.1 0.0 +130°C -0.1 IL = +50µA -0.2 -40°C -0.3 +25°C IL = -50µA -0.4 -0.5 -0.6 -7 -6 -5 -4 SINKING -3 -2 -1 0 1 2 3 4 5 6 OUTPUT CURRENT SOURCING FIGURE 9. LOAD REGULATION vs TEMP 7 20µs/DIV FIGURE 10. LOAD TRANSIENT RESPONSE @ IL = 50µA, CL = 1nF 100mV/DIV VIN AND VOUT (V) DVIN = +7mA DVIN = -7mA 1ms/DIV FIGURE 11. LOAD TRANSIENT RESPONSE @ IL = 7mA, CL = 1nF 4 3.2 3.0 VIN 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 VOUT, IIN = 10µA 0.8 0.6 0.4 0.2 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 TIME (ms) FIGURE 12. TURN-ON TIME @ TA = +25°C FN6239.2 September 28, 2009 ISL21032 Typical Performance Curves, ISL21032 Low Voltage Output Reference VIN = 3.0V, IOUT = 0mA, TA = +25°C Unless Otherwise Specified (Continued) 120 NO LOAD 1nF LOAD 100 10nF LOAD 5µV/DIV ZOUT (Ω) 80 100nF LOAD 60 40 20 0 1 10 100 1k 10k FREQUENCY (Hz) 100k 1M FIGURE 13. ZOUT vs f vs CL 10s/DIV FIGURE 14. VOUT NOISE FGA Technology Board Assembly Considerations The ISL21032 series of voltage references use the floating gate technology to create references with very low drift and supply current. Essentially the charge stored on a floating gate cell is set precisely in manufacturing. The reference voltage output itself is a buffered version of the floating gate voltage. The resulting reference device has excellent characteristics which are unique in the industry: very low temperature drift, high initial accuracy, and almost zero supply current. Also, the reference voltage itself is not limited by voltage bandgaps or zener settings, so a wide range of reference voltages can be programmed (standard voltage settings are provided, but customer-specific voltages are available). FGA references provide high accuracy and low temperature drift but some PC board assembly precautions are necessary. Normal Output voltage shifts of 100µV to 1mV can be expected with Pb-free reflow profiles or wave solder on multi-layer FR4 PC boards. Precautions should be taken to avoid excessive heat or extended exposure to high reflow or wave solder temperatures, this may reduce device initial accuracy. The process used for these reference devices is a floating gate CMOS process, and the amplifier circuitry uses CMOS transistors for amplifier and output transistor circuitry. While providing excellent accuracy, there are limitations in output noise level and load regulation due to the MOS device characteristics. These limitations are addressed with circuit techniques discussed in other sections. Board Mounting Considerations For applications requiring the highest accuracy, board mounting location should be reviewed. Placing the device in areas subject to slight twisting can cause degradation of the accuracy of the reference voltage due to die stresses. It is normally best to place the device near the edge of a board, or the shortest side, as the axis of bending is most limited at that location. Obviously mounting the device on flexprint or extremely thin PC material will likewise cause loss of reference accuracy. 5 Post-assembly x-ray inspection may also lead to permanent changes in device output voltage and should be minimized or avoided. If x-ray inspection is required, it is advisable to monitor the reference output voltage to verify excessive shift has not occurred. If large amounts of shift are observed, it is best to add an X-ray shield consisting of thin zinc (300µm) sheeting to allow clear imaging, yet block x-ray energy that affects the FGA reference. Special Applications Considerations In addition to post-assembly examination, there are also other X-ray sources that may affect the FGA reference long term accuracy. Airport screening machines contain X-rays and will have a cumulative effect on the voltage reference output accuracy. Carry-on luggage screening uses low level X-rays and is not a major source of output voltage shift, although if a product is expected to pass through that type of screening over 100 times it may need to consider shielding with copper or aluminum. Checked luggage X-rays are higher intensity and can cause output voltage shift in much fewer passes, so devices expected to go through those machines should definitely consider shielding. Note that just two layers of 1/2 ounce copper planes will reduce the received dose by over 90%. The leadframe for the device which is on the bottom also provides similar shielding. FN6239.2 September 28, 2009 ISL21032 If a device is expected to pass through luggage X-ray machines numerous times, it is advised to mount a 2-layer (minimum) PC board on the top, and along with a ground plane underneath will effectively shield it from from 50 to 100 passes through the machine. Since these machines vary in X-ray dose delivered, it is difficult to produce an accurate maximum pass recommendation. Noise Performance and Reduction The output noise voltage in a 0.1Hz to 10Hz bandwidth is typically 30µVP-P. The noise measurement is made with a bandpass filter made of a 1 pole high-pass filter with a corner frequency at 0.1Hz and a 2-pole low-pass filter with a corner frequency at 12.6Hz to create a filter with a 9.9Hz bandwidth. Wideband noise is reduced by adding capacitor to the output, but the value should be limited to 1nF or less to insure stability. Temperature Drift The limits stated for output accuracy over-temperature are governed by the method of measurement. For the -40°C to 130°C temperature range, measurements are made at +25°C and the two extremes. This measurement method combined with the fact that FGA references have a fairly linear temperature drift characteristic insures that the limits stated will not be exceeded over the temperature range. VIN = 5V R = 200Ω 2N2905 VIN ISL21032 VOUT 0.6V/50mA 0.001µF GND FIGURE 15. PRECISION LOW NOISE, LOW DRIFT, 0.6V, 50mA REFERENCE 6 FN6239.2 September 28, 2009 ISL21032 Small Outline Transistor Plastic Packages (SOT23-3) 0.20 (0.008) M P3.064 VIEW C C 3 LEAD SMALL OUTLINE TRANSISTOR PLASTIC PACKAGE CL b INCHES SYMBOL 6 5 4 CL CL E1 E 1 2 3 e e1 D C CL A A2 A1 WITH b b1 MILLIMETERS MAX MIN MAX NOTES A 0.035 0.044 0.89 1.12 - A1 0.001 0.004 0.013 0.10 - A2 0.035 0.037 0.88 0.94 - b 0.015 0.020 0.37 0.50 - b1 0.012 0.018 0.30 0.45 - c 0.003 0.007 0.085 0.18 6 c1 0.003 0.005 0.08 0.13 6 D 0.110 0.120 2.80 3.04 3 E 0.083 0.104 2.10 2.64 - E1 0.047 0.055 1.20 1.40 3 SEATING PLANE e 0.0374 Ref 0.95 Ref - -C- e1 0.0748 Ref 1.90 Ref - L - 0.10 (0.004) C PLATING MIN c c1 0.016 0.21 0.41 4 L1 0.024 Ref 0.60 Ref - L2 0.010 Ref 0.25 Ref - N 3 3 5 R 0.004 - 0.10 - - R1 0.004 0.010 0.10 0.25 - a 0° 8° 0° 8° Rev. 1 11/06 BASE METAL NOTES: 1. Dimensioning and tolerance per ASME Y14.5M-1994. 4X θ1 2. Package conforms to EIAJ SC-74 and JEDEC MO178AB. 3. Dimensions D and E1 are exclusive of mold flash, protrusions, or gate burrs. R1 4. Footlength L measured at reference to gauge plane. R 5. “N” is the number of terminal positions. GAUGE PLANE SEATING PLANE L C L1 4X θ1 α L2 6. These Dimensions apply to the flat section of the lead between 0.08mm and 0.15mm from the lead tip. 7. Controlling dimension: MILLIMETER. Converted inch dimensions are for reference only 8. Die is facing up for mold die and trim-form. VIEW C All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 7 FN6239.2 September 28, 2009