previous version

Document 435NR-1
Shielded Power Inductors – LPS4018
le.
availab
ns.
n now for new desig ee
io
s
r
e
v
d
fr
e
d
n
d
e
e
n
v
g
e
Impro
nd halo
recomm
.
re not
d free a and function
par ts a d by new lea
t
These
form, fi
e
c
in
la
l
p
8.cfm.
ntica
re re
They a which are ide ft.com/lps401
s
ra
version ee www.coilc
S
• Very low DCR; excellent current handling
• 4.0 × 4.0 mm footprint; less than 1.8 mm tall
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 54 – 100 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth
(Refer to dimensional drawing for part orientation in tape.)
Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
5
6
Isat (A) Irms (A)
DCR SRF
2
3
4
Inductance max typ 10% 20% 30% 20°C40°C
Part number1
(µH) (Ohms) (MHz)drop drop drop rise rise
LPS4018-561ML_ 0.56 ±20%0.033 250 4.8 5.2 5.3 1.9 2.8
LPS4018-102NL_ 1.0 ±30% 0.042 180 3.8 3.9 4.0 1.8 2.5
LPS4018-222ML_ 2.2 ±20% 0.070 90 2.7 2.8 2.9 1.5 2.0
LPS4018-332ML_ 3.3 ±20% 0.080 75 1.9 2.0 2.0 1.4 1.9
LPS4018-472ML_ 4.7 ±20% 0.125 65 1.8 1.9 1.9 1.3 1.8
LPS4018-682ML_ 6.8 ±20% 0.150 50 1.2 1.3 1.3 1.0 1.5
LPS4018-103ML_ 10 ±20%0.200401.11.21.30.90
1.25
LPS4018-153ML_ 15 ±20% 0.260 32 0.860.910.940.801.12
LPS4018-183ML_ 18 ±20% 0.270 27 0.780.830.850.701.00
LPS4018-223ML_ 22 ±20% 0.360 26 0.740.800.830.650.90
LPS4018-333ML_ 33 ±20% 0.420 20 0.580.640.680.550.80
LPS4018-473ML_ 47 ±20% 0.650 16 0.510.550.560.450.68
LPS4018-683ML_ 68 ±20% 0.950 13 0.410.450.460.400.56
LPS4018-104ML_ 100 ±20% 1.40 10 0.340.360.370.350.50
LPS4018-124ML_ 120 ±20% 1.60 9.00.310.330.340.300.45
LPS4018-154ML_ 150 ±20% 2.00 8.00.270.290.300.280.40
LPS4018-184ML_ 180 ±20% 2.50 7.50.240.260.270.260.36
LPS4018-224ML_ 220 ±20% 3.70
6.5 0.21 0.2250.2350.20 0.30
LPS4018-334ML_ 330 ±20% 5.90 5.50.180.190.200.170.23
LPS4018-474ML_ 470 ±20% 7.80 4.50.140.160.170.150.20
LPS4018-564ML_ 560 ±20%10.0
4.00.130.140.150.140.18
LPS4018-684ML_ 680 ±20%11.5
3.50.120.130.140.120.16
LPS4018-824ML_ 820 ±20%14.0
2.90.110.120.130.100.14
LPS4018-105ML_
1000 ±20%18.0
2.80.100.110.110.098
0.125
LPS4018-155ML_
1500 ±20% 25.0
2.4 0.0950.10 0.1050.0800.110
LPS4018-185ML_
1800 ±20% 31.5
2.3 0.0900.0950.1000.0700.095
LPS4018-225ML_
2200 ±20% 32.5
2.1 0.0880.0940.1000.0700.090
LPS4018-335ML_
3300 ±20% 48.0
1.6 0.0820.0920.0940.0550.075
1. Please specify termination and packaging codes:
LPS4018-223MLC
Termination:L=RoHS compliant silver-palladiumplatinum-glass frit.
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tinlead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481
embossed plastic tape (1000 parts
per full reel).
B=Less than full reel. In tape, but not
machine ready.
To have a leader and trailer added
($25 charge), use code letter C
instead.
D
=13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (3500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms using an
Agilent/HP 4192A. Inductance at 1 MHz is the same
for parts with SRF ≥10 MHz.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise
from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 435NR-1 Revised 05/15/12
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 435NR-2
Shielded SMT Power Inductors – LPS4018 Series
Typical L vs Frequency
Typical L vs Current
10000
10000
2200 µH
680 µH
100
22 µH
10
4.7 µH
1 µH
1
0.1
0.01
2200 µH
1000
Inductance (µH)
Inductance (µH)
1000
680 µH
100
22 µH
10
4.7 µH
1 µH
1
0.1
10
1
Frequency (MHz)
0.1
0.01
0.1
Current (A)
1
10
Current Derating
100
90
80
70
60
50
40
30
20
10
0
25°C
Percent of rated current
120
110
Isat
Irms
-40
-20
0
20
40
60
80
100
120 140
Ambient temperature (°C)
Dimensions are in
inches
mm
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth
Orientation of parts in packaging tape
123
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
123
123
Document 435NR-2 Revised 05/15/12
© Coilcraft Inc. 2014
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.