Document 581NR-1 Shielded Power Inductors – LPS5030 le. availab ns. n now for new desig ee io s r e v d fr e d n d e e n v g e Impro nd halo recomm . re not d free a and function par ts a d by new lea t These form, fi e c in la l p 0.cfm. ntica re re They a which are ide ft.com/lps503 s ra version ee www.coilc S • Very low DCR; excellent current handling • 4.9 × 4.9 mm footprint; less than 3 mm tall Core material Ferrite Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 226 – 244 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth (Refer to dimensional drawing for part orientation in tape.) Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. Isat (A)5 Irms (A)6 DCR SRF Inductance2 max3 typ4 10% 20% 30% 20°C40°C Part number1 ±20% (µH) (Ohms)(MHz) drop drop drop rise rise LPS5030-901ML_ 0.90 0.040 2503.84.04.12.10 2.80 LPS5030-122ML_ 1.2 0.043 2103.53.63.72.00 2.65 LPS5030-172ML_ 1.7 0.051 1903.03.23.31.90 2.50 LPS5030-222ML_ 2.2 0.057 1682.93.13.21.60 2.15 LPS5030-332ML_ 3.3 0.066 1252.32.52.61.40 1.80 LPS5030-472ML_ 4.7 0.083841.92.02.01.30 1.75 LPS5030-562ML_ 5.6 0.089701.81.81.91.25 1.65 LPS5030-682ML_ 6.8 0.099561.61.71.71.20 1.60 LPS5030-822ML_ 8.2 0.125451.61.71.71.10 1.55 LPS5030-103ML_ 10.0 0.127301.41.41.41.00 1.50 LPS5030-123ML_ 12.0 0.155241.31.41.40.95 1.40 LPS5030-153ML_ 15.0 0.160 32 0.800.900.900.921.40 LPS5030-183ML_ 18.0 0.170 27 0.800.820.870.901.30 LPS5030-223ML_ 22.0 0.190 24 0.700.750.780.881.25 LPS5030-333ML_ 33.0 0.260 19 0.600.630.640.851.20 LPS5030-473ML_ 47.0 0.330 16 0.500.530.550.751.00 LPS5030-683ML_ 68.0 0.440 12 0.400.430.440.650.900 LPS5030-823ML_ 82.0 0.470 11 0.380.400.400.600.830 LPS5030-104ML_ 100 0.600 10 0.270.310.320.550.750 LPS5030-124ML_ 120 0.800 9 0.260.290.300.450.660 LPS5030-154ML_ 150 0.860 7.50.220.250.263 0.420.570 LPS5030-224ML_ 220 1.35 6.0 0.21 0.2350.2450.36 0.500 LPS5030-334ML_ 330 1.80 5.0 0.1550.1550.2000.32 0.420 LPS5030-474ML_ 470 2.80 4.0 0.1170.1340.1460.28 0.370 LPS5030-564ML_ 560 3.20 3.6 0.1100.1300.1400.23 0.320 LPS5030-684ML_ 680 3.80 3.0 0.1000.1200.1260.20 0.290 LPS5030-105ML_ 1000 5.10 2.5 0.1000.1100.1100.18 0.250 LPS5030-155ML_ 1500 7.60 2.0 0.0680.0800.0890.15 0.210 LPS5030-185ML_ 1800 10.0 1.8 0.0690.0810.0860.13 0.170 LPS5030-225ML_ 2200 11.0 1.6 0.0630.0740.0800.10 0.150 LPS5030-335ML_ 3300 19.5 1.3 0.0560.0630.0670.0900.125 LPS5030-475ML_ 4700 26.0 1.1 0.0490.0560.0590.0800.110 1. Please specify termination and packaging codes: LPS5030-105MLC Termination:L=RoHS compliant silver-palladiumplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tinlead (63/37). Packaging:C =7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4192A impedance analyzer or equivalent. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current at which the inductance drops the specified amount from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 581NR-1 Revised 01/23/12 © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 581NR-2 Shielded Power Inductors – LPS5030 Series Typical L vs Frequency Typical L vs Current 10000 10000 3300 µH 3300 µH 1000 µH 330 µH 100 µH 100 33 µH 10 µH 10 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 330 µH 100 µH 100 33 µH 10 µH 10 3.3 µH 3.3 µH 1 0.01 1 0.1 10 Frequency (MHz) Typical Current Derating 1 0.01 0.1 1 10 0.189 ±0.003* 4,80 ±0,076 120 110 0.189 ±0.003* 4,80 ±0,076 100 XXX X 90 80 70 Dash number 60 Winding direction Internal code 50 0.114 ±0.004 ** 2,9 ±0,1 40 30 20 10 0 25°C Percent of rated current Current (A) Isat Irms -40 -20 0 20 Recommended Land Pattern 0.060 1,50 40 60 80 100 0.134 3,40 120 140 Ambient temperature (°C) 0.039 typ 1,00 0.217 5,51 0.0665 1,689 0.134 3,40 0.134 3,40 0.060 0.039 typ 1,00 1,52 0.134 3,40 0.217 5,51 are of the case not * Dimensions including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. optional tin-lead and tin-silver-copper **For terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch (0,13 mm). Dimensions are in inches mm Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth Orientation of parts in packaging tape 123 US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] 123 123 Document 581NR-2 Revised 01/23/12 © Coilcraft Inc. 2014 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.