q 5,2 12,6 5,1 O 2,35 NEG. CONTACT (PAD) 11,0 q 4,0 27,63 32,7 25,6 Scale - 1,3:1 0,3 3,85 8,6 24,5 A 2,8 sectional drawing A-A A Scale - 1,3:1 Surface coating: nickel-plated Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany com. +49 79 42 945 - 0 REV. FILE DATE BY www.we-online.de [email protected] CREATED DaF CHECKED SKl GENERAL TOLERANCE DIN ISO 2768-1m SIZE PROJECTION METHOD A4 DESCRIPTION TECHNICAL REFERENCE MATERIAL AsBCMC Battery Holder SMD _________ Phosphor Bronze SIZE WEIGHT 1 Li Coin Cell 1,48g ORDER CODE 79573131 STATUS DATE Released 2015-05-07 BUSINESS UNIT eiCan PAGE 1 /1 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.