HAMBURG INDUSTRIES CO., LTD DIM "A" TECHNICAL CHARACTERISTICS 1.General Characteristics Dimensions: 11.10L x 7.60W x 1.50H mm 11.10L x 7.60W x 1.70H mm 11.10L x 7.60W x 1.80H mm 11.10L x 7.60W x 1.90H mm 11.10L x 7.60W x 2.00H mm 11.10L x 7.60W x 2.40H mm 11.10L x 7.60W x 2.60H mm Weight: Approx. 0.20 g Contact principle: Friction technology Operating position: Shaft up / Down / Horizontal Mounting System: SMT without post Durability: 10,000 cycles min. 2. Mechanical Characteristics: Insulation material: Thermoplastic, UL 94V-0 3.Electrical Characteristics Number of contacts: 6 pins Contact resistance: 50 mΩ typical, 100 mΩ max. Insulation resistance: > 1000 MΩ / 500 VDC DIMENSION A=1.5, 1.7, 1.8, 1.9, 2.0, 2.4, 2.6 mm Unit: mm; Tolerances: ±0.10mm Mechanical outline dimension 4. Solderability Wave: Not applicable Vaporphase: 215°C, 30 sec. Max. IR reflow: 230°C, 15 sec. Max. Manual soldering: Not applicable 5. Environmental Characteristics Operating temperature: - 40°C ~ + 85°C Operating humidity: 10 % ~ 95 % RH Storage temperature: - 40°C ~ + 85°C Storage humidity: 10 % ~ 95 % RH Thermal shock: - 40°C ~ + 85°C, 5 cycles Damp Heat: 40°C, 90 % RH, 500HR. Salt-mist: 35°C, 5%, NaCl , 48HR. H&V Smart Card Connector Model No.: ICC-409 Revision: 1.4 Date: MAR. 22, 2004 Unit: mm; Tolerances: ±0.10mm Reference dimension for PCB layout