MAJOR-LEAGUE SIMS60

Major League Electronics 6 or 8 Pin Push/Push Type Surface Mount SIM Connector
0.823
(20.9)
0.75
(19.10)
8P=0.395
(10.04)
6P=0.25
(6.35)
0.018
(0.45)
8P=0.35
(8.89)
8P=0.35±0.002
(8.89)
8P=0.221±0.002
(5.61)
6P=0.121±0.002
(3.07)
0.029
(0.75)
0.045
(1.15)
6P=0.295
(7.50)
0.050 Typ.
(1.27)
0.008
(0.20)
0.004
(0.10)
0.0275±0.004
(0.70)
0.05
P8 P4 P7 P3 P6 P2 P5 P1 CD
0.200±0.004
(5.10)
0.276±0.002
(7.00)
0.079
(2.00)
0.620±0.004
(15.75)
0.620±0.002
(15.75)
Ø0.031±0.002
(0.80)
Activation Spring
2.3mm clearance required
(See Note 1)
1.002
(25.45)
6P=0.25±0.002
(6.35)
0.053 +0.02
-0.00 (1.35)
2-Ø0.035 +0.004
-0.00
(0.90)
Overall Length:
1.055
(26.80)
0.551±0.002
(14.00)
8P=0.395±0.002
(10.04)
6P=0.295±0.002
(7.50)
0.047
(1.20)
0.197
(5.0)
0.063 +0.016
-0.00
(1.60)
PUSH STROKE
0.079
(2.00)
0.035
(0.90)
0.114
(2.90)
Sim Card
GND
0.834 +0.02
-0.00
(21.20)
RECOMMENDED PCB LAYOUTS
General Tolerance±0.002
CARD EJECT POSITION
0.596
(15.15)
Card Center
0.551±0.004
(14.00)
0.082
(2.10)
Overall height
(see note 1)
0.052
(1.32)
0.067
(1.70)
0.035±0.004
(0.90)
Connector
Terminal No.
Circuit Diagram for Card Detect Switch
CARD Detect Switch
Normal....SHORT
Inserting Card....OPEN
GND
0.031
(0.80)
0.295
(7.50)
CARD LOCK POSITION
GND
0.004
(0.10)
Ordering Information
Pin No.
Pin 1
VCC: PWR signal and GND
Pin 2
RST: Reset signal
Pin 3
CLK: Clocking signal
Pin 4
Reserved
Pin 5
GND: PWR signal and GND
Pin 6
VPP: programming Voltage
Pin 7
I/O: serial date input/output
Pin 8
Reserved
NOTE1: OVERALL CLEARANCE OF 2.30mm
REQUIRED (IN DETAIL AREA SHOWN
ONLY) FOR ACTIVATION SPRING
DURING INSERTION & WITHDRAWAL
SIMS60 X - 20 - F - LF
Lead Free
Number of Contacts
6 or 8
Packing Information
F = Reel
SUPPORT FRAME
(SEE NOTE)
Weight:
Approx. 2.50g
Insulation Resistance:
> 1000 MΩ/ 500 VDC
Storage Temperature:
-40°C, ~ +60°C
Contact Principle:
Friction Technology
Wave:
Not applicable
Storage Humidity:
10% ~ 95% RH
Operating Position:
Shaft Up/Down/Horizontal
VaporPhase:
215°C, 30 sec. Max.
Thermal Shock:
-40°C, ~ +60°C, 5 cycles
Durability:
5,000 Cycles Min.
IR Reflow:
260°C, 15 sec. Max.
Damp Heat:
40°C, 90% RH, 500HR
Insulation Material:
Thermoplastic, UL94V-0
Manual Soldering:
360°C, 3 sec. Max.
Salt-Mist:
35°C, 5% NaCl, 48HR
Contact Material:
Gold plating with 3u” Min.
Operating Temperature:
-25°C, ~ +85°C
Contact Resistance:
100 mΩ Max.
Operating Humidity:
10% ~ 95% RH
SIMS60 SERIES
SIM Card Connector
Push/Push Type 6 or 8 Pin
19 APR 07
4235 Earnings Way, New Albany, Indiana, 47150, USA
1-800-782-3486 (USA/Canada/Mexico)
Tel: 812-944-7244
Fax: 812-944-7268
E-mail: [email protected]
Web: www.mlelectronics.com
Revisions
Revision B - (26th Jul 2010)
Plating Information added to specification
SIMS60 SERIES
SIM Card Connector
Push/Push Type 6 or 8 Pin
19 APR 07
4235 Earnings Way, New Albany, Indiana, 47150, USA
1-800-782-3486 (USA/Canada/Mexico)
Tel: 812-944-7244
Fax: 812-944-7268
E-mail: [email protected]
Web: www.mlelectronics.com