HAMBURG INDUSTRIES CO., LTD. Wolfgang Knap GmbH & Co. KG / Lilienberggasse 13 / 1130 Vienna / Austria NDS Compliant TECHNICAL CHARACTERISTICS 1. General Characteristics Dimension: 27.55L x 18.70W x 2.90H mm Standoff H=1.00 mm Weight: Approx. 1.38 g Contact principle: Friction technology Operating position: Shaft up / Down / Horizontal Mounting System: SMT Type (post optional) Function: Push Push Type Durability: 5,000 cycles min. 2. Mechanical Characteristics Insulation material: Thermoplastic, UL 94V-0 RoHS Directive 2002/95/EC Compliant 3. Electrical Characteristics Number of contacts: 6, 8 pins (optional) Contact resistance: 50 m typical, 100 m max. Insulation resistance: >1000 M / 500 VDC Switch type: Blade Operation: Normally Close ※Must keep minimum 0.2mm gap above connector to assure the push function in good condition. Unit: mm; Tolerances: 0.15 mm Mechanical outline dimension 4. Solderability Wave: Not applicable IR reflow: 260C, 10 sec. Max. Manual soldering: 360C, 3 sec. Max. 5. Environmental Characteristics Operating temperature: - 40C ~ + 85C Operating humidity: 10 % ~ 95 % RH Storage temperature: - 40C ~ + 85C Storage humidity: 10 % ~ 95 % RH H&V SIM Card Acceptor Model No.: ICA-568 Type2 8Pin Revision: 1.0 Unit: mm; Tolerances: 0.05 mm Reference dimension for PCB layout Date: JAN. 01, 2011 For further information,please contact: Tel: +43 1 4030812 Fax: +43 1 4087213 E-mail: [email protected] URL: http://www.knap.at