zum neuen Datenblatt

HAMBURG INDUSTRIES CO., LTD.
Wolfgang Knap GmbH & Co. KG / Lilienberggasse 13 / 1130 Vienna / Austria
EMV Compliant
TECHNICAL CHARACTRISTICS
1. General Characteristics
Dimension: 56.00L x 31.10W x 3.65H mm
Weight: Approx. 6.1 g
Contact principle: Friction technology
Operating position: Shaft up / Down / Horizontal
Mounting System: SMT Type (with post)
Durability: 100,000 cycles min.
2. Mechanical Characteristics
Insulation material: Thermoplastic, UL 94V-0
RoHS Directive 2011/65/EU Compliant
3. Electrical Characteristics
Number of contacts: 8 pins
Contact resistance: 50 m typical, 100 m max.
Insulation resistance: >1000 M / 500 VDC
Switch type: Blade
Operation: Normally Open
Unit: mm, Tolerances: 0.15 mm
Mechanical outline dimension
4. Solderability
Wave: Not applicable
IR reflow: 260C, 10 sec. Max.
Manual soldering: 360C, 3 sec. Max.
5. Environmental Characteristics
Operating temperature: - 40C ~ + 85C
Operating humidity: 10 % ~ 95 % RH
Storage temperature: - 40C ~ + 85C
Storage humidity: 10 % ~ 95 % RH
Unit: mm, Tolerances: 0.05 mm
Reference dimension for PCB layout
H&V Smart Card Acceptor
Model No.: ICA-607 Type1
Revision: 2.2
Date: MAY 01, 2014
For further information,please contact:
Tel: +43 1 4030812 Fax: +43 1 4087213
Note:
1. Coplanarity of solder pins 0.10mm max.
2. Recommended thickness of solder paste > 0.15mm.
e-mail: [email protected]
URL: http://www.knap.at