A L C O A 2008 March 13 P R I C E D A T A North American Rolled Products Supersedes previous page Dated 2006 August 17 5 Alcoa Inc. Section S&P 102 Effective for all new orders entered on and after March 13, 2008, and for all existing orders with a scheduled shipping date on or after March 17, 2008. ♦ HEAT–TREATABLE ALLOY 6061 Minimum Item Quantity - 8,000 Pounds MILL FINISH - BARE Thickness Range Width 45 - 60.50 in. - Length 72 - 360 in. Inches O, F temper T temper 8.50 - 6.06 - $ 3.00 6.05 – 2.00 - $ 3.20 1.99 – 1.00 - $ 3.30 .999 - .625 $ 3.30 $ 3.40 .624 - .250 $ 3.35 $ 3.45 * Thickness .376 in. and over - Sawed as standard. Under .376 in. - Sheared or sawed, mill option. ♦ 6061 Armor Plate per MIL-DTL-32262 – see price page S&P102, page 3. * Plate weighing in excess of 8,000 lbs - Subject to inquiry. WIDTH EXTRAS - Per Pound All Tempers Thickness Range Width Range, inches Inches 12.00 – 23.99 24.00 -44.99 60.51 – 72.50 72.51 - 84.50 84.51 - 96.50 96.51 - 132.00 8.50 - 1.00 $ .20 $ .10 Base Base $ .20 $ .40 .999 - .625 $ .20 $ .10 $ .20 $ .30 $ .40 $ .50 .624 - .500 $ .20 $ .10 $ .30 $ .40 $ .50 $ .60 .499 - .250 $ .20 $ .10 $ .30 $ .40 $ .50 - * Widths over 102 inches - Additional transportation charges apply. LENGTHS, LONG EXTRA - Per Pound All Tempers Length Inches Thickness Range Width Range Inches Inches 360.01 - 480.00 8.50 - .250 12.00 - 132.00 $ .15 * Lengths over 540 inches - Additional transportation charges apply. * Lengths under 72" - Subject to Inquiry STANDARD SHIPPING TOLERANCE Pounds per Item Plus / Minus 20,000 & Over 20% 19,999 - 10,000 30% 9,999 - 8,000 40% If the shipping tolerance in pounds. is less than the weight of a single piece, a shipping tolerance of plus / minus one piece will apply. ♦ Indicates change from or addition to previous issue. — Denotes price is subject to inquiry. Tables do not indicate availability. Contact Alcoa Representative for thickness, width, length and temper limitations.