Photo IC PNA4601M Series (PNA4601M/4602M/4608M/4610M) Bipolar Integrated Circuit with Photodetection Function For infrared remote control systems Unit : mm External parts not required 2.3 0.8 2.0±0.1 3-1.5±0.2 22.0 min. Absolute Maximum Ratings (Ta = 25˚C) Parameter 5˚ 5˚ Adoption of visible light cutoff resin Symbol Ratings VCC – 0.5 to +7 V Power dissipation PD 200 mW Operating ambient temperature Topr –20 to +75 ˚C Storage temperature Tstg – 40 to +100 ˚C Power supply voltage R2.25±0.1 5˚ Extension distance is 8 m or more 2.25 5˚ 8.0±0.2 5.2 Features 5.25±0.3 Not soldered 1.5 7.0±0.2 3.5 1.0±0.1 3-0.5 +0.2 –0.15 0.45±0.2 Unit 1 2 3 2-2.54 1: VOUT 2: GND 3: VCC Main Characteristics (Ta = 25˚C VCC = 5V) Parameter Symbol Conditions min typ max Operating supply voltage VCC Current consumption ICC Note 3 Maximum reception distance Lmax Note 1 8 Low-level output voltage VOL Note 2 4.7 5.0 5.3 V 1.8 2.4 3.0 mA High-level output voltage VOH Note 3 Low-level pulse width TWL Note 1 High-level pulse width TWH Note 1 200 PNA4602M PNA4608M m 0.35 0.5 4.8 5.0 VCC V 200 400 600 µs 400 600 µs PNA4601M Carrier frequency 10 Unit V 36.7 38.0 f0 56.9 PNA4610M kHz 33.3 Note 1) Fig. 1 burst wave, L = Lmax, 16 pulses Note 2) Fig. 2 continuous wave, L ≤ Lmax Note 3) Light shut off condition Carrier wave : f0 400µs Carrier wave : f0 400µs Fig.1 Fig.2 1 PNA4601M, PNA4602M, PNA4608M, PNA4610M Photo IC Block Diagram VCC (20kΩ) AGC B.P.F demodulator PD comparator integrator peak hold ,, ,,, constant voltage RL VO ,, amplifier GND Panasonic Transmitter Specifications LED Transmission unit Standard reception unit 10kΩ 10V PNZ323B 10µF 20cm V out 10kΩ V out 55mV 10kΩ GND The light output of the LED transmission unit is adjusted so that the transmission output (V out) of the standard reception unit will be 55 mV when the transmission waveform (duty = 50%) is output from the LED transmission unit. Here, infrared sensitivity (SIR) of PNZ323B is 0.53 µA when emission illuminance (H) is 12.45 µW/ cm2. The maximum reception distance under these specifications is an assurance that TWH and TWL values will be within the tolerance ranges when 16 consecutive pulses of an optical output equivalent to the maximum reception distance are transmitted by the above transmission unit (The maximum reception distance is measured in the dark without external disturbance noise.) 2 PNA4601M, PNA4602M, PNA4608M, PNA4610M L max — Ta 100 Relative sensitivity S (%) 100 80 60 40 80 60 40 20 20 0 – 20 VCC = 5V Transmitter : Standard LED Transmission unit used 0 20 40 Ambient temperature 60 80 100 Ta (˚C ) Spectral sensitivity characteristics 100 80 60 40 20 0 33 35 37 39 41 43 Carrier frequency (kHz) * The peaks for PNA4601M, PNA4608M, and PNA4610M are all f0. 0 600 700 800 900 Wavelength 1000 1100 1200 λ (nm) Directivity characteristics 0˚ 10˚ 20˚ 100 90 80 70 60 50 40 30 20 Relative reception distance (%) Relative reception distance L max (%) 120 B.P.F frequency characteristics (PNA4602M)* Relative sensitivity S (%) Photo IC 30˚ 40˚ 50˚ 60˚ 70˚ 80˚ 90˚ 3