D200 Series High Power 200W reed relay with 7kV isolation 200W switching power 7kV Isolation across contacts Low Contact Resistance PCB Mount Excellent AC characteristics The D200 series combines a high power 200W switching capacity with isolation of 7kV across the contacts. This switching performance is achieved through the use of high vacuum reed switches with Tungsten contacts and make these relays suitable for high reliability applications, such as test equipment and high voltage power supplies. These are PCB Mount relays, though custom options may be available on request. Contact Specification Switch Action Contact Material Isolation across contacts kV Switching Power Max. W Switching Voltage Max. V Switching Current Max. A Carry Current Max A Capacitance across pF contacts Lifetime operations Contact Resistance Insulation Resistance Coil Specification Must Operate Voltage Must Release Voltage Operate Time Release Time Resistance Relay Specification Unit Condition SPNO Tungsten 7 200 2500 3 5 0.8 typ DC or AC peak resistive DC or AC peak DC or AC peak DC or AC peak coil to screen grounded dry switching 50W switching mW max (typical) Wmin (typical) 109 106 600 (1013) 12V 24V 5V V V ms ms W DC DC diode fitted diode fitted Isolation contact/coil kV Insulation resistance contact to all terminals Wmin (typical) Environmental Operating Temp range ºC Standard Parts DAT200-05 DAT200-12 DAT200-24 3.75 0.5 6.0 1.0 28 9 1.25 6.0 1.0 150 20 4 6.0 1.0 780 17 10 13 10 (10 ) 20 to +70 Coil Voltage Vdc 5 12 24 Please refer to this document for circuit design notes:http://www.cynergy3.com/blog/application-notes-reed-relays-0 Mechanical Dimensions 60.0 (2.36") Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 15.8 (0.62") 18.5 (0.73") 4.0 (0.15") 4 Pins 0.635(0.025”) Square 5.1 (0.2") 3 10.2 2 1 4 (0.4") 25.4 (1.0") 50.8 (2.0") CIRCUIT DIAGRAM FORM A (NO) 1 3 4 2 Email:[email protected] ISO9001 C E R T I F I E D www.cynergy3.com D200 2016 © 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.