SLP SLP Suspended Level Probe Submersible probe Low space requirement Cable mounted N/O or N/C confgurable submersible level probe The SLP is a single switch level probe, for use in water or aqueous liquids, designed to be suspended into the liquid by its cable. It can be configured to give make or break action on either rise or fall of liquid level, by removing the protective shield and reversing the float orientation. The switching level may be adjusted by varying the cable length. The reed switch contact is suitable for switching signal levels, up to 250* volts. No power requirement The main uses for this probe are in level indication for narrow boreholes, or applications with restricted space, and also as a signal switch for reservoir high or low level monitoring. These are manufactured with standard PVC cable of 15 metre length but can be manufactured with other cable lengths. Other switch types and configurations, cable gland and cable types are possible. Please contact the factory with your requirement. Technical Specifcation Float Housing Shield Cable gland Cable Cable length Temperature range °C °F Min. Fluid S.G. Max working pressure Standard Parts SLP4AP15 Polypropylene Stainless Steel Stainless Steel Nylon 2 core PVC sheathed 15M / 25M 0 / +55 +32 / +131 0.8 5 bar Float material Polypropylene Electrical Specifcation Contact Form Switching Power Max. VA Switching Voltage AC/DC Max. Switching Current Max. A SPNO 25 250 * 0.6 * Switching Voltage AC/DC Max.may be subject to restriction by regulation, dependent on application and region of use. All ratings are for resistive load only. Cable Length 15 metres Cable type PVC sheathed Mechanical Dimensions All dimensions are in millimeters (inches) #ONSTRUCTION Cable 2 Core PVC Cable Gland: IP68 %NVIRONMENTAL Body: Stainless Steel 160mm 0ART.UMBERING3YSTEM (6.3”) Nom. Float Shield: Stainless Steel Perforated Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] ISO 9001 C E R T I F I E D Float Switch: Polypropylene 35.00mm (1.4” Nom. www.cynergy3.com © 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.